diff options
Diffstat (limited to 'tboot/include/com.h')
| -rw-r--r-- | tboot/include/com.h | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/tboot/include/com.h b/tboot/include/com.h new file mode 100644 index 0000000..c51a9fd --- /dev/null +++ b/tboot/include/com.h @@ -0,0 +1,311 @@ +/*- + * Copyright (c) 1991 The Regents of the University of California. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * from: @(#)ns16550.h 7.1 (Berkeley) 5/9/91 + * $FreeBSD: src/sys/dev/ic/ns16550.h,v 1.20 2010/01/11 04:13:06 imp Exp $ + */ +/* + * Portions copyright (c) 2010, Intel Corporation + */ + +/* + * NS8250... UART registers. + */ +#ifndef __COM_H__ +#define __COM_H__ + +/* 8250 registers #[0-6]. */ + +#define com_data 0 /* data register (R/W) */ +#define REG_DATA com_data + +#define com_ier 1 /* interrupt enable register (W) */ +#define REG_IER com_ier +#define IER_ERXRDY 0x1 +#define IER_ETXRDY 0x2 +#define IER_ERLS 0x4 +#define IER_EMSC 0x8 + +#define IER_BITS "\20\1ERXRDY\2ETXRDY\3ERLS\4EMSC" + +#define com_iir 2 /* interrupt identification register (R) */ +#define REG_IIR com_iir +#define IIR_IMASK 0xf +#define IIR_RXTOUT 0xc +#define IIR_BUSY 0x7 +#define IIR_RLS 0x6 +#define IIR_RXRDY 0x4 +#define IIR_TXRDY 0x2 +#define IIR_NOPEND 0x1 +#define IIR_MLSC 0x0 +#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */ + +#define IIR_BITS "\20\1NOPEND\2TXRDY\3RXRDY" + +#define com_lcr 3 /* line control register (R/W) */ +#define com_cfcr com_lcr /* character format control register (R/W) */ +#define REG_LCR com_lcr +#define LCR_DLAB 0x80 +#define CFCR_DLAB LCR_DLAB +#define LCR_EFR_ENABLE 0xbf /* magic to enable EFR on 16650 up */ +#define CFCR_EFR_ENABLE LCR_EFR_ENABLE +#define LCR_SBREAK 0x40 +#define CFCR_SBREAK LCR_SBREAK +#define LCR_PZERO 0x30 +#define CFCR_PZERO LCR_PZERO +#define LCR_PONE 0x20 +#define CFCR_PONE LCR_PONE +#define LCR_PEVEN 0x10 +#define CFCR_PEVEN LCR_PEVEN +#define LCR_PODD 0x00 +#define CFCR_PODD LCR_PODD +#define LCR_PENAB 0x08 +#define CFCR_PENAB LCR_PENAB +#define LCR_STOPB 0x04 +#define CFCR_STOPB LCR_STOPB +#define LCR_8BITS 0x03 +#define CFCR_8BITS LCR_8BITS +#define LCR_7BITS 0x02 +#define CFCR_7BITS LCR_7BITS +#define LCR_6BITS 0x01 +#define CFCR_6BITS LCR_6BITS +#define LCR_5BITS 0x00 +#define CFCR_5BITS LCR_5BITS + +#define LCR_ODD_PARITY (LCR_PENAB | LCR_PODD) +#define LCR_EVEN_PARITY (LCR_PENAB | LCR_PEVEN) +#define LCR_MARK_PARITY (LCR_PENAB | LCR_PONE) +#define LCR_SPACE_PARITY (LCR_PENAB | LCR_PZERO) + +#define com_mcr 4 /* modem control register (R/W) */ +#define REG_MCR com_mcr +#define MCR_PRESCALE 0x80 /* only available on 16650 up */ +#define MCR_LOOPBACK 0x10 +#define MCR_IE 0x08 +#define MCR_IENABLE MCR_IE +#define MCR_DRS 0x04 +#define MCR_RTS 0x02 +#define MCR_DTR 0x01 + +#define MCR_BITS "\20\1DTR\2RTS\3DRS\4IE\5LOOPBACK\10PRESCALE" + +#define com_lsr 5 /* line status register (R/W) */ +#define REG_LSR com_lsr +#define LSR_RCV_FIFO 0x80 +#define LSR_TEMT 0x40 +#define LSR_TSRE LSR_TEMT +#define LSR_THRE 0x20 +#define LSR_TXRDY LSR_THRE +#define LSR_BI 0x10 +#define LSR_FE 0x08 +#define LSR_PE 0x04 +#define LSR_OE 0x02 +#define LSR_RXRDY 0x01 +#define LSR_RCV_MASK 0x1f + +#define LSR_BITS "\20\1RXRDY\2OE\3PE\4FE\5BI\6THRE\7TEMT\10RCV_FIFO" + +#define com_msr 6 /* modem status register (R/W) */ +#define REG_MSR com_msr +#define MSR_DCD 0x80 +#define MSR_RI 0x40 +#define MSR_DSR 0x20 +#define MSR_CTS 0x10 +#define MSR_DDCD 0x08 +#define MSR_TERI 0x04 +#define MSR_DDSR 0x02 +#define MSR_DCTS 0x01 + +#define MSR_BITS "\20\1DCTS\2DDSR\3TERI\4DDCD\5CTS\6DSR\7RI\10DCD" + +/* 8250 multiplexed registers #[0-1]. Access enabled by LCR[7]. */ +#define com_dll 0 /* divisor latch low (R/W) */ +#define com_dlbl com_dll +#define com_dlm 1 /* divisor latch high (R/W) */ +#define com_dlbh com_dlm +#define REG_DLL com_dll +#define REG_DLH com_dlm + +/* 16450 register #7. Not multiplexed. */ +#define com_scr 7 /* scratch register (R/W) */ + +/* 16550 register #2. Not multiplexed. */ +#define com_fcr 2 /* FIFO control register (W) */ +#define com_fifo com_fcr +#define REG_FCR com_fcr +#define FCR_ENABLE 0x01 +#define FIFO_ENABLE FCR_ENABLE +#define FCR_RCV_RST 0x02 +#define FIFO_RCV_RST FCR_RCV_RST +#define FCR_XMT_RST 0x04 +#define FIFO_XMT_RST FCR_XMT_RST +#define FCR_DMA 0x08 +#define FIFO_DMA_MODE FCR_DMA +#define FCR_RX_LOW 0x00 +#define FIFO_RX_LOW FCR_RX_LOW +#define FCR_RX_MEDL 0x40 +#define FIFO_RX_MEDL FCR_RX_MEDL +#define FCR_RX_MEDH 0x80 +#define FIFO_RX_MEDH FCR_RX_MEDH +#define FCR_RX_HIGH 0xc0 +#define FIFO_RX_HIGH FCR_RX_HIGH + +#define FCR_BITS "\20\1ENABLE\2RCV_RST\3XMT_RST\4DMA" + +/* 16650 registers #2,[4-7]. Access enabled by LCR_EFR_ENABLE. */ + +#define com_efr 2 /* enhanced features register (R/W) */ +#define REG_EFR com_efr +#define EFR_CTS 0x80 +#define EFR_AUTOCTS EFR_CTS +#define EFR_RTS 0x40 +#define EFR_AUTORTS EFR_RTS +#define EFR_EFE 0x10 /* enhanced functions enable */ + +#define com_xon1 4 /* XON 1 character (R/W) */ +#define com_xon2 5 /* XON 2 character (R/W) */ +#define com_xoff1 6 /* XOFF 1 character (R/W) */ +#define com_xoff2 7 /* XOFF 2 character (R/W) */ + +#define com_usr 39 /* Octeon 16750/16550 Uart Status Reg */ +#define REG_USR com_usr +#define USR_TXFIFO_NOTFULL 2 /* Uart TX FIFO Not full */ + +/* 16950 register #1. Access enabled by ACR[7]. Also requires !LCR[7]. */ +#define com_asr 1 /* additional status register (R[0-7]/W[0-1]) */ + +/* 16950 register #3. R/W access enabled by ACR[7]. */ +#define com_rfl 3 /* receiver fifo level (R) */ + +/* + * 16950 register #4. Access enabled by ACR[7]. Also requires + * !LCR_EFR_ENABLE. + */ +#define com_tfl 4 /* transmitter fifo level (R) */ + +/* + * 16950 register #5. Accessible if !LCR_EFR_ENABLE. Read access also + * requires ACR[6]. + */ +#define com_icr 5 /* index control register (R/W) */ + +/* + * 16950 register #7. It is the same as com_scr except it has a different + * abbreviation in the manufacturer's data sheet and it also serves as an + * index into the Indexed Control register set. + */ +#define com_spr com_scr /* scratch pad (and index) register (R/W) */ +#define REG_SPR com_scr + +/* + * 16950 indexed control registers #[0-0x13]. Access is via index in SPR, + * data in ICR (if ICR is accessible). + */ + +#define com_acr 0 /* additional control register (R/W) */ +#define ACR_ASE 0x80 /* ASR/RFL/TFL enable */ +#define ACR_ICRE 0x40 /* ICR enable */ +#define ACR_TLE 0x20 /* TTL/RTL enable */ + +#define com_cpr 1 /* clock prescaler register (R/W) */ +#define com_tcr 2 /* times clock register (R/W) */ +#define com_ttl 4 /* transmitter trigger level (R/W) */ +#define com_rtl 5 /* receiver trigger level (R/W) */ +/* ... */ + +/* Hardware extension mode register for RSB-2000/3000. */ +#define com_emr com_msr +#define EMR_EXBUFF 0x04 +#define EMR_CTSFLW 0x08 +#define EMR_DSRFLW 0x10 +#define EMR_RTSFLW 0x20 +#define EMR_DTRFLW 0x40 +#define EMR_EFMODE 0x80 + +/* com port */ +#define COM1_ADDR 0x3f8 +#define COM2_ADDR 0x2f8 +#define COM3_ADDR 0x3e8 +#define COM4_ADDR 0x2e8 + +#define GET_LCR_DATABIT(x) ({ \ + typeof(x) val = 0; \ + val = (((x) == 5) ? LCR_5BITS : (val)); \ + val = (((x) == 6) ? LCR_6BITS : (val)); \ + val = (((x) == 7) ? LCR_7BITS : (val)); \ + val = (((x) == 8) ? LCR_8BITS : (val)); \ + val; }) + +#define GET_LCR_STOPBIT(x) ({ \ + typeof(x) val = 0; \ + val = (((x) > 1) ? LCR_STOPB : val); \ + val; }) + +#define GET_LCR_PARITY(x) ({ \ + typeof(x) val = 0; \ + val = (((x) == 'n') ? (!LCR_PENAB) : val); \ + val = (((x) == 'o') ? LCR_ODD_PARITY : val); \ + val = (((x) == 'e') ? LCR_EVEN_PARITY : val); \ + val = (((x) == 'm') ? LCR_MARK_PARITY : val); \ + val = (((x) == 's') ? LCR_SPACE_PARITY : val); \ + val; }) + +#define GET_LCR_VALUE(data, stop, parity) \ + (GET_LCR_DATABIT(data) | GET_LCR_STOPBIT(stop) | GET_LCR_PARITY(parity)) + +typedef struct __packed { + uint32_t bus; + uint32_t slot; + uint32_t func; +} bdf_t; + +typedef struct __packed { + uint32_t comc_curspeed; /* baud rate */ + uint32_t comc_clockhz; /* clock hz */ + uint8_t comc_fmt; /* lcr value */ + uint32_t comc_port; /* serial port, COM[1|2|3|4] */ + uint32_t comc_irq; /* irq */ + bdf_t comc_psbdf; /* PCI serial controller bdf */ + bdf_t comc_pbbdf; /* PCI bridge bdf */ +} serial_port_t; + +void comc_init(void); +void comc_puts(const char*, unsigned int); + +#endif /* __COM_H__ */ + + +/* + * Local variables: + * mode: C + * c-set-style: "BSD" + * c-basic-offset: 4 + * tab-width: 4 + * indent-tabs-mode: nil + * End: + */ |