aboutsummaryrefslogtreecommitdiffstats
path: root/roms/u-boot/board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
blob: 40747abbdb2b0e79dc722578fd628fdfb5fd2cd3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
/*
 * Copyright (C) 2013 Boundary Devices
 * Copyright (C) 2013 SolidRun ltd.
 * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/* ZQ Calibrations */
DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
/* write leveling */
DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x005a0057
DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x004a0052
/*
 * DQS gating, read delay, write delay calibration values
 * based on calibration compare of 0x00ffff00
 */
DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x02480240
DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02340230
DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40404440
DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x38343034
/* read data bit delay */
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
/* Complete calibration by forced measurement */
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800

/*
 * MMDC init:
 * in DDR3, 32-bit mode, only MMDC0 is initiated:
 */
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d
DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040

DATA 4, MX6_MMDC_P0_MDCFG0, 0x3f435313
DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8b63

DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db
DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2
DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
/* CS0_END - 0x2fffffff, 512M  */
DATA 4, MX6_MMDC_P0_MDASP, 0x00000017

/* MMDC0_MAARCR ADOPT optimized priorities. Dyn jump disabled */
DATA 4, 0x021b0400, 0x11420000

/* MMDC0_MDCTL- row-14bits; col-10bits; burst length 8;32-bit data bus */
DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000

/*
 * Initialize 2GB DDR3 - Hynix H5TQ2G63BFR-H9C
 * MR2
 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008032
/* MR3 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
/* MR1 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031
/* MR0 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
/* ZQ calibration */
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
/* final DDR setup */
DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d
DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000