3 files changed, 440 insertions, 0 deletions
diff --git a/roms/u-boot/board/spear/common/Makefile b/roms/u-boot/board/spear/common/Makefile
new file mode 100644
index 00000000..b0ba3204
--- /dev/null
+++ b/roms/u-boot/board/spear/common/Makefile
@@ -0,0 +1,14 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+# necessary to create built-in.o
+obj- := __dummy__.o
+else
+obj-y	:= spr_misc.o
+obj-y	+= spr_lowlevel_init.o
+endif
diff --git a/roms/u-boot/board/spear/common/spr_lowlevel_init.S b/roms/u-boot/board/spear/common/spr_lowlevel_init.S
new file mode 100644
index 00000000..23a0369c
--- /dev/null
+++ b/roms/u-boot/board/spear/common/spr_lowlevel_init.S
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2006
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+
+/*
+ * platform specific initializations are already done in Xloader
+ * Initializations already done include
+ * DDR, PLLs, IP's clock enable and reset release etc
+ */
+.globl lowlevel_init
+lowlevel_init:
+	/* By default, U-Boot switches CPU to low-vector */
+	/* Revert this as we work in high vector even in U-Boot */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #0x00002000
+	mcr	p15, 0, r0, c1, c0, 0
+	mov	pc, lr
+
+/* void setfreq(unsigned int device, unsigned int frequency) */
+.global setfreq
+setfreq:
+	stmfd 	sp!,{r14}
+	stmfd 	sp!,{r0-r12}
+
+	mov  	r8,sp
+	ldr 	sp,SRAM_STACK_V
+
+	/* Saving the function arguements for later use */
+	mov  	r4,r0
+	mov  	r5,r1
+
+	/* Putting DDR into self refresh */
+	ldr 	r0,DDR_07_V
+	ldr	r1,[r0]
+	ldr	r2,DDR_ACTIVE_V
+	bic	r1, r1, r2
+	str	r1,[r0]
+	ldr 	r0,DDR_57_V
+	ldr	r1,[r0]
+	ldr	r2,CYCLES_MASK_V
+	bic	r1, r1, r2
+	ldr	r2,REFRESH_CYCLES_V
+	orr	r1, r1, r2, lsl #16
+	str	r1,[r0]
+	ldr 	r0,DDR_07_V
+	ldr	r1,[r0]
+	ldr	r2,SREFRESH_MASK_V
+	orr	r1, r1, r2
+	str	r1,[r0]
+
+	/* flush pipeline */
+	b	flush
+	.align 5
+flush:
+	/* Delay to ensure self refresh mode */
+	ldr	r0,SREFRESH_DELAY_V
+delay:
+	sub	r0,r0,#1
+	cmp	r0,#0
+	bne	delay
+
+	/* Putting system in slow mode */
+	ldr	r0,SCCTRL_V
+	mov	r1,#2
+	str	r1,[r0]
+
+	/* Changing PLL(1/2) frequency */
+	mov	r0,r4
+	mov	r1,r5
+
+	cmp	r4,#0
+	beq	pll1_freq
+
+	/* Change PLL2 (DDR frequency) */
+	ldr	r6,PLL2_FREQ_V
+	ldr	r7,PLL2_CNTL_V
+	b	pll2_freq
+
+pll1_freq:
+	/* Change PLL1 (CPU frequency) */
+	ldr	r6,PLL1_FREQ_V
+	ldr	r7,PLL1_CNTL_V
+
+pll2_freq:
+	mov	r0,r6
+	ldr	r1,[r0]
+	ldr	r2,PLLFREQ_MASK_V
+	bic	r1,r1,r2
+	mov	r2,r5,lsr#1
+	orr	r1,r1,r2,lsl#24
+	str	r1,[r0]
+
+	mov	r0,r7
+	ldr	r1,P1C0A_V
+	str	r1,[r0]
+	ldr	r1,P1C0E_V
+	str	r1,[r0]
+	ldr	r1,P1C06_V
+	str	r1,[r0]
+	ldr	r1,P1C0E_V
+	str	r1,[r0]
+
+lock:
+	ldr	r1,[r0]
+	and	r1,r1,#1
+	cmp	r1,#0
+	beq	lock
+
+	/* Putting system back to normal mode */
+	ldr	r0,SCCTRL_V
+	mov	r1,#4
+	str	r1,[r0]
+
+	/* Putting DDR back to normal */
+	ldr	r0,DDR_07_V
+	ldr	r1,[R0]
+	ldr	r2,SREFRESH_MASK_V
+	bic	r1, r1, r2
+	str	r1,[r0]
+	ldr	r2,DDR_ACTIVE_V
+	orr	r1, r1, r2
+	str	r1,[r0]
+
+	/* Delay to ensure self refresh mode */
+	ldr	r0,SREFRESH_DELAY_V
+1:
+	sub	r0,r0,#1
+	cmp	r0,#0
+	bne	1b
+
+	mov	sp,r8
+	/* Resuming back to code */
+	ldmia	sp!,{r0-r12}
+	ldmia	sp!,{pc}
+
+SCCTRL_V:
+	.word 0xfca00000
+PLL1_FREQ_V:
+	.word 0xfca8000C
+PLL1_CNTL_V:
+	.word 0xfca80008
+PLL2_FREQ_V:
+	.word 0xfca80018
+PLL2_CNTL_V:
+	.word 0xfca80014
+PLLFREQ_MASK_V:
+	.word 0xff000000
+P1C0A_V:
+	.word 0x1C0A
+P1C0E_V:
+	.word 0x1C0E
+P1C06_V:
+	.word 0x1C06
+
+SREFRESH_DELAY_V:
+	.word 0x9999
+SRAM_STACK_V:
+	.word 0xD2800600
+DDR_07_V:
+	.word 0xfc60001c
+DDR_ACTIVE_V:
+	.word 0x01000000
+DDR_57_V:
+	.word 0xfc6000e4
+CYCLES_MASK_V:
+	.word 0xffff0000
+REFRESH_CYCLES_V:
+	.word 0xf0f0
+SREFRESH_MASK_V:
+	.word 0x00010000
+
+.global setfreq_sz
+setfreq_sz:
+	.word setfreq_sz - setfreq
diff --git a/roms/u-boot/board/spear/common/spr_misc.c b/roms/u-boot/board/spear/common/spr_misc.c
new file mode 100644
index 00000000..bc92cd6f
--- /dev/null
+++ b/roms/u-boot/board/spear/common/spr_misc.c
@@ -0,0 +1,247 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <net.h>
+#include <linux/mtd/st_smi.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_emi.h>
+#include <asm/arch/spr_defs.h>
+
+#define CPU		0
+#define DDR		1
+#define SRAM_REL	0xD2801000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET)
+static int i2c_read_mac(uchar *buffer);
+#endif
+
+int dram_init(void)
+{
+	/* Store complete RAM size and return */
+	gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+int board_early_init_f()
+{
+#if defined(CONFIG_ST_SMI)
+	smi_init();
+#endif
+	return 0;
+}
+int misc_init_r(void)
+{
+#if defined(CONFIG_CMD_NET)
+	uchar mac_id[6];
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
+		eth_setenv_enetaddr("ethaddr", mac_id);
+#endif
+	setenv("verify", "n");
+
+#if defined(CONFIG_SPEAR_USBTTY)
+	setenv("stdin", "usbtty");
+	setenv("stdout", "usbtty");
+	setenv("stderr", "usbtty");
+
+#ifndef CONFIG_SYS_NO_DCACHE
+	dcache_enable();
+#endif
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_SPEAR_EMI
+struct cust_emi_para {
+	unsigned int tap;
+	unsigned int tsdp;
+	unsigned int tdpw;
+	unsigned int tdpr;
+	unsigned int tdcs;
+};
+
+/* EMI timing setting of m28w640hc of linux kernel */
+const struct cust_emi_para emi_timing_m28w640hc = {
+	.tap = 0x10,
+	.tsdp = 0x05,
+	.tdpw = 0x0a,
+	.tdpr = 0x0a,
+	.tdcs = 0x05,
+};
+
+/* EMI timing setting of bootrom */
+const struct cust_emi_para emi_timing_bootrom = {
+	.tap = 0xf,
+	.tsdp = 0x0,
+	.tdpw = 0xff,
+	.tdpr = 0x111,
+	.tdcs = 0x02,
+};
+
+void spear_emi_init(void)
+{
+	const struct cust_emi_para *p = &emi_timing_m28w640hc;
+	struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
+	unsigned int cs;
+	unsigned int val, tmp;
+
+	val = readl(CONFIG_SPEAR_RASBASE);
+
+	if (val & EMI_ACKMSK)
+		tmp = 0x3f;
+	else
+		tmp = 0x0;
+
+	writel(tmp, &emi_regs_p->ack);
+
+	for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
+		writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
+		writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
+		writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
+		writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
+		writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
+		writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
+		       &emi_regs_p->bank_regs[cs].control);
+	}
+}
+#endif
+
+int spear_board_init(ulong mach_type)
+{
+	gd->bd->bi_arch_number = mach_type;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
+
+#ifdef CONFIG_SPEAR_EMI
+	spear_emi_init();
+#endif
+	return 0;
+}
+
+#if defined(CONFIG_CMD_NET)
+static int i2c_read_mac(uchar *buffer)
+{
+	u8 buf[2];
+
+	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	/* Check if mac in i2c memory is valid */
+	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+		/* Valid mac address is saved in i2c eeprom */
+		i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
+		return 0;
+	}
+
+	return -1;
+}
+
+static int write_mac(uchar *mac)
+{
+	u8 buf[2];
+
+	buf[0] = (u8)MAGIC_BYTE0;
+	buf[1] = (u8)MAGIC_BYTE1;
+	i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	buf[0] = (u8)~MAGIC_BYTE0;
+	buf[1] = (u8)~MAGIC_BYTE1;
+
+	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	/* check if valid MAC address is saved in I2C EEPROM or not? */
+	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+		i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
+		puts("I2C EEPROM written with mac address \n");
+		return 0;
+	}
+
+	puts("I2C EEPROM writing failed\n");
+	return -1;
+}
+#endif
+
+int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	void (*sram_setfreq) (unsigned int, unsigned int);
+	unsigned int frequency;
+#if defined(CONFIG_CMD_NET)
+	unsigned char mac[6];
+#endif
+
+	if ((argc > 3) || (argc < 2))
+		return cmd_usage(cmdtp);
+
+	if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
+
+		frequency = simple_strtoul(argv[2], NULL, 0);
+
+		if (frequency > 333) {
+			printf("Frequency is limited to 333MHz\n");
+			return 1;
+		}
+
+		sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
+
+		if (!strcmp(argv[1], "cpufreq")) {
+			sram_setfreq(CPU, frequency);
+			printf("CPU frequency changed to %u\n", frequency);
+		} else {
+			sram_setfreq(DDR, frequency);
+			printf("DDR frequency changed to %u\n", frequency);
+		}
+
+		return 0;
+
+#if defined(CONFIG_CMD_NET)
+	} else if (!strcmp(argv[1], "ethaddr")) {
+
+		u32 reg;
+		char *e, *s = argv[2];
+		for (reg = 0; reg < 6; ++reg) {
+			mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+		write_mac(mac);
+
+		return 0;
+#endif
+	} else if (!strcmp(argv[1], "print")) {
+#if defined(CONFIG_CMD_NET)
+		if (!i2c_read_mac(mac)) {
+			printf("Ethaddr (from i2c mem) = %pM\n", mac);
+		} else {
+			printf("Ethaddr (from i2c mem) = Not set\n");
+		}
+#endif
+		return 0;
+	}
+
+	return cmd_usage(cmdtp);
+}
+
+U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
+	   "configure chip",
+	   "chip_config cpufreq/ddrfreq frequency\n"
+#if defined(CONFIG_CMD_NET)
+	   "chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
+#endif
+	   "chip_config print");