1 files changed, 278 insertions, 0 deletions
diff --git a/roms/u-boot/board/gen860t/gen860t.c b/roms/u-boot/board/gen860t/gen860t.c
new file mode 100644
index 00000000..fe139f49
--- /dev/null
+++ b/roms/u-boot/board/gen860t/gen860t.c
@@ -0,0 +1,278 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <virtex2.h>
+#include <common.h>
+#include <mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include "beeper.h"
+#include "fpga.h"
+#include "ioport.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+
+#if defined(CONFIG_CMD_MII) && defined(CONFIG_MII)
+#include <net.h>
+#endif
+
+#if 0
+#define GEN860T_DEBUG
+#endif
+
+#ifdef GEN860T_DEBUG
+#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define	PRINTF(fmt,args...)
+#endif
+
+/*
+ * The following UPM init tables were generated automatically by
+ * Motorola's MCUINIT program. See the README file for UPM to
+ * SDRAM pin assignments if you want to type this data into
+ * MCUINIT in order to reverse engineer the waveforms.
+ */
+
+/*
+ * UPM initialization tables for MICRON MT48LC16M16A2TG SDRAM devices
+ * (UPMA) and Virtex FPGA SelectMap interface (UPMB).
+ * NOTE that unused areas of the table are used to hold NOP, precharge
+ * and mode register set sequences.
+ *
+ */
+#define	UPMA_NOP_ADDR			0x5
+#define	UPMA_PRECHARGE_ADDR		0x6
+#define UPMA_MRS_ADDR			0x12
+
+#define UPM_SINGLE_READ_ADDR	0x00
+#define UPM_BURST_READ_ADDR		0x08
+#define UPM_SINGLE_WRITE_ADDR	0x18
+#define UPM_BURST_WRITE_ADDR	0x20
+#define	UPM_REFRESH_ADDR		0x30
+
+const uint sdram_upm_table[] = {
+	/* single read   (offset 0x00 in upm ram) */
+	0x0e0fdc04, 0x01adfc04, 0x0fbffc00, 0x1fff5c05,
+	0xffffffff, 0x0fffffcd, 0x0fff0fce, 0xefcfffff,
+	/* burst read    (offset 0x08 in upm ram) */
+	0x0f0fdc04, 0x00fdfc04, 0xf0fffc00, 0xf0fffc00,
+	0xf1fffc00, 0xfffffc00, 0xfffffc05, 0xffffffff,
+	0xffffffff, 0xffffffff, 0x0ffffff4, 0x1f3d5ff4,
+	0xfffffff4, 0xfffffff5, 0xffffffff, 0xffffffff,
+	/* single write  (offset 0x18 in upm ram) */
+	0x0f0fdc04, 0x00ad3c00, 0x1fff5c05, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* burst write   (offset 0x20 in upm ram) */
+	0x0f0fdc00, 0x10fd7c00, 0xf0fffc00, 0xf0fffc00,
+	0xf1fffc04, 0xfffffc05, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xfffff7ff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* refresh       (offset 0x30 in upm ram) */
+	0x1ffddc84, 0xfffffc04, 0xfffffc04, 0xfffffc84,
+	0xfffffc05, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* exception     (offset 0x3C in upm ram) */
+};
+
+const uint selectmap_upm_table[] = {
+	/* single read   (offset 0x00 in upm ram) */
+	0x88fffc06, 0x00fff404, 0x00fffc04, 0x33fffc00,
+	0xfffffc05, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* burst read    (offset 0x08 in upm ram) */
+	0xfffffc04, 0xfffffc05, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* single write  (offset 0x18 in upm ram) */
+	0x88fffc04, 0x00fff400, 0x77fffc05, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* burst write   (offset 0x20 in upm ram) */
+	0xfffffc04, 0xfffffc05, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* refresh       (offset 0x30 in upm ram) */
+	0xfffffc04, 0xfffffc05, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	/* exception     (offset 0x3C in upm ram) */
+	0xfffffc05, 0xffffffff, 0xffffffff, 0xffffffff
+};
+
+/*
+ * Check board identity.  Always successful (gives information only)
+ */
+int checkboard (void)
+{
+	char *s;
+	char buf[64];
+	int i;
+
+	i = getenv_f("board_id", buf, sizeof (buf));
+	s = (i > 0) ? buf : NULL;
+
+	if (s) {
+		printf ("%s ", s);
+	} else {
+		printf ("<unknown> ");
+	}
+
+	i = getenv_f("serial#", buf, sizeof (buf));
+	s = (i > 0) ? buf : NULL;
+
+	if (s) {
+		printf ("S/N %s\n", s);
+	} else {
+		printf ("S/N <unknown>\n");
+	}
+
+	printf ("CPU at %s MHz, ", strmhz (buf, gd->cpu_clk));
+	printf ("local bus at %s MHz\n", strmhz (buf, gd->bus_clk));
+	return (0);
+}
+
+/*
+ * Initialize SDRAM
+ */
+phys_size_t initdram (int board_type)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+
+	upmconfig (UPMA,
+		   (uint *) sdram_upm_table,
+		   sizeof (sdram_upm_table) / sizeof (uint)
+		);
+
+	/*
+	 * Setup MAMR register
+	 */
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	/*
+	 * Map CS1* to SDRAM bank
+	 */
+	memctl->memc_or1 = CONFIG_SYS_OR1;
+	memctl->memc_br1 = CONFIG_SYS_BR1;
+
+	/*
+	 * Perform SDRAM initialization sequence:
+	 * 1. Apply at least one NOP command
+	 * 2. 100 uS delay (JEDEC standard says 200 uS)
+	 * 3. Issue 4 precharge commands
+	 * 4. Perform two refresh cycles
+	 * 5. Program mode register
+	 *
+	 * Program SDRAM for standard operation, sequential burst, burst length
+	 * of 4, CAS latency of 2.
+	 */
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
+		MCR_MLCF (0) | UPMA_NOP_ADDR;
+	udelay (200);
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
+		MCR_MLCF (4) | UPMA_PRECHARGE_ADDR;
+
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
+		MCR_MLCF (2) | UPM_REFRESH_ADDR;
+
+	memctl->memc_mar = 0x00000088;
+	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
+		MCR_MLCF (1) | UPMA_MRS_ADDR;
+
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
+		MCR_MLCF (0) | UPMA_NOP_ADDR;
+	/*
+	 * Enable refresh
+	 */
+	memctl->memc_mamr |= MAMR_PTAE;
+
+	return (SDRAM_SIZE);
+}
+
+/*
+ * Disk On Chip (DOC) Millenium initialization.
+ * The DOC lives in the CS2* space
+ */
+#if defined(CONFIG_CMD_DOC)
+void doc_init (void)
+{
+	printf ("Probing at 0x%.8x: ", DOC_BASE);
+	doc_probe (DOC_BASE);
+}
+#endif
+
+/*
+ * Miscellaneous intialization
+ */
+int misc_init_r (void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+
+	/*
+	 * Set up UPMB to handle the Virtex FPGA SelectMap interface
+	 */
+	upmconfig (UPMB, (uint *) selectmap_upm_table,
+		   sizeof (selectmap_upm_table) / sizeof (uint));
+
+	memctl->memc_mbmr = 0x0;
+
+	config_mpc8xx_ioports (immr);
+
+#if defined(CONFIG_CMD_MII)
+	mii_init ();
+#endif
+
+#if defined(CONFIG_FPGA)
+	gen860t_init_fpga ();
+#endif
+	return 0;
+}
+
+/*
+ * Final init hook before entering command loop.
+ */
+int last_stage_init (void)
+{
+#if !defined(CONFIG_SC)
+	char buf[256];
+	int i;
+
+	/*
+	 * Turn the beeper volume all the way down in case this is a warm boot.
+	 */
+	set_beeper_volume (-64);
+	init_beeper ();
+
+	/*
+	 * Read the environment to see what to do with the beeper
+	 */
+	i = getenv_f("beeper", buf, sizeof (buf));
+	if (i > 0) {
+		do_beeper (buf);
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Stub to make POST code happy.  Can't self-poweroff, so just hang.
+ */
+void board_poweroff (void)
+{
+	puts ("### Please power off the board ###\n");
+	while (1);
+}