1 files changed, 148 insertions, 0 deletions
diff --git a/roms/u-boot/board/freescale/mx28evk/mx28evk.c b/roms/u-boot/board/freescale/mx28evk/mx28evk.c
new file mode 100644
index 00000000..5005fe23
--- /dev/null
+++ b/roms/u-boot/board/freescale/mx28evk/mx28evk.c
@@ -0,0 +1,148 @@
+/*
+ * Freescale MX28EVK board
+ *
+ * (C) Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * Based on m28evk.c:
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+	/* IO0 clock at 480MHz */
+	mxs_set_ioclk(MXC_IOCLK0, 480000);
+	/* IO1 clock at 480MHz */
+	mxs_set_ioclk(MXC_IOCLK1, 480000);
+
+	/* SSP0 clock at 96MHz */
+	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+	/* SSP2 clock at 160MHz */
+	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
+
+#ifdef	CONFIG_CMD_USB
+	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
+	mxs_iomux_setup_pad(MX28_PAD_AUART2_RX__GPIO_3_8 |
+			MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL);
+	gpio_direction_output(MX28_PAD_AUART2_RX__GPIO_3_8, 1);
+#endif
+
+	/* Power on LCD */
+	gpio_direction_output(MX28_PAD_LCD_RESET__GPIO_3_30, 1);
+
+	/* Set contrast to maximum */
+	gpio_direction_output(MX28_PAD_PWM2__GPIO_3_18, 1);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	return mxs_dram_init();
+}
+
+int board_init(void)
+{
+	/* Adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+#ifdef	CONFIG_CMD_MMC
+static int mx28evk_mmc_wp(int id)
+{
+	if (id != 0) {
+		printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+		return 1;
+	}
+
+	return gpio_get_value(MX28_PAD_SSP1_SCK__GPIO_2_12);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	/* Configure WP as input */
+	gpio_direction_input(MX28_PAD_SSP1_SCK__GPIO_2_12);
+
+	/* Configure MMC0 Power Enable */
+	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
+
+	return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp, NULL);
+}
+#endif
+
+#ifdef	CONFIG_CMD_NET
+
+int board_eth_init(bd_t *bis)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	struct eth_device *dev;
+	int ret;
+
+	ret = cpu_eth_init(bis);
+	if (ret)
+		return ret;
+
+	/* MX28EVK uses ENET_CLK PAD to drive FEC clock */
+	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
+	       &clkctrl_regs->hw_clkctrl_enet);
+
+	/* Power-on FECs */
+	gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0);
+
+	/* Reset FEC PHYs */
+	gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0);
+	udelay(200);
+	gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1);
+
+	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+	if (ret) {
+		puts("FEC MXS: Unable to init FEC0\n");
+		return ret;
+	}
+
+	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+	if (ret) {
+		puts("FEC MXS: Unable to init FEC1\n");
+		return ret;
+	}
+
+	dev = eth_get_dev_by_name("FEC0");
+	if (!dev) {
+		puts("FEC MXS: Unable to get FEC0 device entry\n");
+		return -EINVAL;
+	}
+
+	dev = eth_get_dev_by_name("FEC1");
+	if (!dev) {
+		puts("FEC MXS: Unable to get FEC1 device entry\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+#endif