diff options
Diffstat (limited to 'roms/u-boot/board/eltec/elppc/flash.c')
| -rw-r--r-- | roms/u-boot/board/eltec/elppc/flash.c | 496 |
1 files changed, 496 insertions, 0 deletions
diff --git a/roms/u-boot/board/eltec/elppc/flash.c b/roms/u-boot/board/eltec/elppc/flash.c new file mode 100644 index 00000000..2b41685c --- /dev/null +++ b/roms/u-boot/board/eltec/elppc/flash.c @@ -0,0 +1,496 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * 07-10-2002 Frank Gottschling: added 29F032 flash (ELPPC). + * fixed monitor protection part + * + * 09-18-2001 Andreas Heppel: Reduced the code in here to the usage + * of AMD's 29F040 and 29F016 flashes, since the BAB7xx does use + * any other. + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/pci_io.h> + +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +ulong flash_get_size (vu_long *addr, flash_info_t *info); +static int write_word (flash_info_t *info, ulong dest, ulong data); + +/*flash command address offsets*/ + +#define ADDR0 (0x555) +#define ADDR1 (0x2AA) +#define ADDR3 (0x001) + +#define FLASH_WORD_SIZE unsigned char + +/*----------------------------------------------------------------------------*/ + +unsigned long flash_init (void) +{ + unsigned long size1, size2; + int i; + + /* Init: no FLASHes known */ + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) + { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* initialise 1st flash */ + size1 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) + { + printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size1, size1<<20); + } + + /* initialise 2nd flash */ + size2 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); + + if (flash_info[1].flash_id == FLASH_UNKNOWN) + { + printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", + size2, size2<<20); + } + + /* monitor protection ON by default */ + if (size1 == 512*1024) + { + (void)flash_protect(FLAG_PROTECT_SET, + FLASH_BASE0_PRELIM, + FLASH_BASE0_PRELIM+monitor_flash_len-1, + &flash_info[0]); + } + if (size2 == 512*1024) + { + (void)flash_protect(FLAG_PROTECT_SET, + FLASH_BASE1_PRELIM, + FLASH_BASE1_PRELIM+monitor_flash_len-1, + &flash_info[1]); + } + if (size2 == 4*1024*1024) + { + (void)flash_protect(FLAG_PROTECT_SET, + CONFIG_SYS_FLASH_BASE, + CONFIG_SYS_FLASH_BASE+monitor_flash_len-1, + &flash_info[1]); + } + + return (size1 + size2); +} + +/*----------------------------------------------------------------------------*/ + +void flash_print_info (flash_info_t *info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + flash_init(); + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + printf ("AMD "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case AMD_ID_F040B: + printf ("AM29F040B (4 Mbit)\n"); + break; + case AMD_ID_F016D: + printf ("AM29F016D (16 Mbit)\n"); + break; + case AMD_ID_F032B: + printf ("AM29F032B (32 Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + if (info->size >= (1 << 20)) { + printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); + } else { + printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count); + } + + printf (" Sector Start Addresses:"); + for (i=0; i<info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; k<size; k++) { + if (*flash++ != 0xffffffff) { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf ("\n "); + + printf (" %08lX%s%s", + info->start[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); + } + printf ("\n"); +} + +/*----------------------------------------------------------------------------*/ +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size (vu_long *addr, flash_info_t *info) +{ + short i; + ulong vendor, devid; + ulong base = (ulong)addr; + volatile unsigned char *caddr = (unsigned char *)addr; + +#ifdef DEBUG + printf("flash_get_size for address 0x%lx: \n", (unsigned long)caddr); +#endif + + /* Write auto select command: read Manufacturer ID */ + caddr[0] = 0xF0; /* reset bank */ + udelay(10); + + eieio(); + caddr[0x555] = 0xAA; + udelay(10); + caddr[0x2AA] = 0x55; + udelay(10); + caddr[0x555] = 0x90; + + udelay(10); + + vendor = caddr[0]; + devid = caddr[1]; + +#ifdef DEBUG + printf("Manufacturer: 0x%lx\n", vendor); +#endif + + vendor &= 0xff; + devid &= 0xff; + + /* We accept only two AMD types */ + switch (vendor) { + case (FLASH_WORD_SIZE)AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + switch (devid) { + case (FLASH_WORD_SIZE)AMD_ID_F040B: + info->flash_id |= AMD_ID_F040B; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (FLASH_WORD_SIZE)AMD_ID_F016D: + info->flash_id |= AMD_ID_F016D; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (FLASH_WORD_SIZE)AMD_ID_F032B: + info->flash_id |= AMD_ID_F032B; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + + } + +#ifdef DEBUG + printf("flash id 0x%lx; sector count 0x%x, size 0x%lx\n", info->flash_id, info->sector_count, info->size); +#endif + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* sector base address */ + info->start[i] = base + i * (info->size / info->sector_count); + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + caddr = (volatile unsigned char *)(info->start[i]); + info->protect[i] = caddr[2] & 1; + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { + caddr = (volatile unsigned char *)info->start[0]; + caddr[0] = 0xF0; /* reset bank */ + } + + return (info->size); +} + +/*----------------------------------------------------------------------------*/ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); + int flag, prot, sect, l_sect; + ulong start, now, last; + int rc = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if ((info->flash_id == FLASH_UNKNOWN) || + (info->flash_id > FLASH_AMD_COMP)) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (FLASH_WORD_SIZE *)(info->start[sect]); + if (info->flash_id & FLASH_MAN_SST) { + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ + udelay(30000); /* wait 30 ms */ + } + else + addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = (FLASH_WORD_SIZE *)(info->start[l_sect]); + while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } + } + +DONE: + /* reset to read mode */ + addr = (FLASH_WORD_SIZE *)info->start[0]; + addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ + + printf (" done\n"); + return rc; +} + +/*----------------------------------------------------------------------------*/ +/* + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i<l; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + for (; i<4 && cnt>0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------------*/ +/* Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t *info, ulong dest, ulong data) +{ + volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); + volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; + volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; + ulong start; + int flag; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile FLASH_WORD_SIZE *)dest) & + (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) + { + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != + (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { + return (1); + } + } + } + + return (0); +} + +/*----------------------------------------------------------------------------*/ |