Initial import of qemu-2.4.1HEADmaster

1 files changed, 846 insertions, 0 deletions

diff --git a/roms/u-boot/MAKEALL b/roms/u-boot/MAKEALL
new file mode 100755
index 00000000..020e65fd
--- /dev/null
+++ b/roms/u-boot/MAKEALL
@@ -0,0 +1,846 @@
+#!/bin/bash
+# Tool mainly for U-Boot Quality Assurance: build one or more board
+# configurations with minimal verbosity, showing only warnings and
+# errors.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+
+usage()
+{
+	# if exiting with 0, write to stdout, else write to stderr
+	local ret=${1:-0}
+	[ "${ret}" -eq 1 ] && exec 1>&2
+	cat <<-EOF
+	Usage: MAKEALL [options] [--] [boards-to-build]
+
+	Options:
+	  -a ARCH,   --arch ARCH       Build all boards with arch ARCH
+	  -c CPU,    --cpu CPU         Build all boards with cpu CPU
+	  -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
+	  -s SOC,    --soc SOC         Build all boards with soc SOC
+	  -b BOARD,  --board BOARD     Build all boards with board name BOARD
+	  -l,        --list            List all targets to be built
+	  -m,        --maintainers     List all targets and maintainer email
+	  -M,        --mails           List all targets and all affilated emails
+	  -C,        --check           Enable build checking
+	  -n,        --continue        Continue (skip boards already built)
+	  -r,        --rebuild-errors  Rebuild any boards that errored
+	  -h,        --help            This help output
+
+	Selections by these options are logically ANDed; if the same option
+	is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
+	will select all configurations where the vendor is either FOO or
+	BAR.  Any additional arguments specified on the command line are
+	always build additionally.  See the boards.cfg file for more info.
+
+	If no boards are specified, then the default is "powerpc".
+
+	Environment variables:
+	  BUILD_NCPUS      number of parallel make jobs (default: auto)
+	  CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
+	  CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
+			   architecture "ARCH".  Substitute "ARCH" for any
+			   supported architecture (default: "")
+	  MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
+	  BUILD_DIR        output build directory (default: ./)
+	  BUILD_NBUILDS	   number of parallel targets (default: 1)
+
+	Examples:
+	  - build all Power Architecture boards:
+	      MAKEALL -a powerpc
+	      MAKEALL --arch powerpc
+	      MAKEALL powerpc
+	  - build all PowerPC boards manufactured by vendor "esd":
+	      MAKEALL -a powerpc -v esd
+	  - build all PowerPC boards manufactured either by "keymile" or "siemens":
+	      MAKEALL -a powerpc -v keymile -v siemens
+	  - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
+	      MAKEALL -c mpc83xx -v freescale 4xx
+	EOF
+	exit ${ret}
+}
+
+SHORT_OPTS="ha:c:v:s:b:lmMCnr"
+LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
+
+# Option processing based on util-linux-2.13/getopt-parse.bash
+
+# Note that we use `"$@"' to let each command-line parameter expand to a
+# separate word. The quotes around `$@' are essential!
+# We need TEMP as the `eval set --' would nuke the return value of
+# getopt.
+TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
+     -n 'MAKEALL' -- "$@"`
+
+[ $? != 0 ] && usage 1
+
+# Note the quotes around `$TEMP': they are essential!
+eval set -- "$TEMP"
+
+SELECTED=''
+ONLY_LIST=''
+PRINT_MAINTS=''
+MAINTAINERS_ONLY=''
+CONTINUE=''
+REBUILD_ERRORS=''
+
+while true ; do
+	case "$1" in
+	-a|--arch)
+		# echo "Option ARCH: argument \`$2'"
+		if [ "$opt_a" ] ; then
+			opt_a="${opt_a%)} || \$2 == \"$2\")"
+		else
+			opt_a="(\$2 == \"$2\")"
+		fi
+		SELECTED='y'
+		shift 2 ;;
+	-c|--cpu)
+		# echo "Option CPU: argument \`$2'"
+		if [ "$opt_c" ] ; then
+			opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
+		else
+			opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
+		fi
+		SELECTED='y'
+		shift 2 ;;
+	-s|--soc)
+		# echo "Option SoC: argument \`$2'"
+		if [ "$opt_s" ] ; then
+			opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
+		else
+			opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
+		fi
+		SELECTED='y'
+		shift 2 ;;
+	-v|--vendor)
+		# echo "Option VENDOR: argument \`$2'"
+		if [ "$opt_v" ] ; then
+			opt_v="${opt_v%)} || \$5 == \"$2\")"
+		else
+			opt_v="(\$5 == \"$2\")"
+		fi
+		SELECTED='y'
+		shift 2 ;;
+	-b|--board)
+		# echo "Option BOARD: argument \`$2'"
+		if [ "$opt_b" ] ; then
+			opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
+		else
+			# We need to check the 7th field too
+			# for boards whose 6th field is "-"
+			opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
+		fi
+		SELECTED='y'
+		shift 2 ;;
+	-C|--check)
+		CHECK='C=1'
+		shift ;;
+	-n|--continue)
+		CONTINUE='y'
+		shift ;;
+	-r|--rebuild-errors)
+		REBUILD_ERRORS='y'
+		shift ;;
+	-l|--list)
+		ONLY_LIST='y'
+		shift ;;
+	-m|--maintainers)
+		ONLY_LIST='y'
+		PRINT_MAINTS='y'
+		MAINTAINERS_ONLY='y'
+		shift ;;
+	-M|--mails)
+		ONLY_LIST='y'
+		PRINT_MAINTS='y'
+		shift ;;
+	-h|--help)
+		usage ;;
+	--)
+		shift ; break ;;
+	*)
+		echo "Internal error!" >&2 ; exit 1 ;;
+	esac
+done
+# echo "Remaining arguments:"
+# for arg do echo '--> '"\`$arg'" ; done
+
+FILTER="\$1 !~ /^#/"
+[ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
+[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
+[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
+[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
+[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
+
+if [ "$SELECTED" ] ; then
+	SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
+
+	# Make sure some boards from boards.cfg are actually found
+	if [ -z "$SELECTED" ] ; then
+		echo "Error: No boards selected, invalid arguments"
+		exit 1
+	fi
+fi
+
+#########################################################################
+
+# Print statistics when we exit
+trap exit 1 2 3 15
+trap print_stats 0
+
+# Determine number of CPU cores if no default was set
+: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
+
+if [ "$BUILD_NCPUS" -gt 1 ]
+then
+	JOBS="-j $((BUILD_NCPUS + 1))"
+else
+	JOBS=""
+fi
+
+if [ "${MAKEALL_LOGDIR}" ] ; then
+	LOG_DIR=${MAKEALL_LOGDIR}
+else
+	LOG_DIR="LOG"
+fi
+
+: ${BUILD_NBUILDS:=1}
+BUILD_MANY=0
+
+if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
+	BUILD_MANY=1
+	: ${BUILD_DIR:=./build}
+	mkdir -p "${BUILD_DIR}/ERR"
+	find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
+fi
+
+: ${BUILD_DIR:=.}
+
+OUTPUT_PREFIX="${BUILD_DIR}"
+
+[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
+if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
+	find "${LOG_DIR}/" -type f -exec rm -f {} +
+fi
+
+LIST=""
+
+# Keep track of the number of builds and errors
+ERR_CNT=0
+ERR_LIST=""
+WRN_CNT=0
+WRN_LIST=""
+TOTAL_CNT=0
+SKIP_CNT=0
+CURRENT_CNT=0
+OLDEST_IDX=1
+RC=0
+
+# Helper funcs for parsing boards.cfg
+targets_by_field()
+{
+	field=$1
+	regexp=$2
+
+	awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
+								boards.cfg
+}
+
+targets_by_arch() { targets_by_field 2 "$@" ; }
+targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
+targets_by_soc()  { targets_by_field 4 "$@" ; }
+
+#########################################################################
+## MPC5xx Systems
+#########################################################################
+
+LIST_5xx="$(targets_by_cpu mpc5xx)"
+
+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+
+LIST_5xxx="$(targets_by_cpu mpc5xxx)"
+
+#########################################################################
+## MPC512x Systems
+#########################################################################
+
+LIST_512x="$(targets_by_cpu mpc512x)"
+
+#########################################################################
+## MPC8xx Systems
+#########################################################################
+
+LIST_8xx="$(targets_by_cpu mpc8xx)"
+
+#########################################################################
+## PPC4xx Systems
+#########################################################################
+
+LIST_4xx="$(targets_by_cpu ppc4xx)"
+
+#########################################################################
+## MPC824x Systems
+#########################################################################
+
+LIST_824x="$(targets_by_cpu mpc824x)"
+
+#########################################################################
+## MPC8260 Systems (includes 8250, 8255 etc.)
+#########################################################################
+
+LIST_8260="$(targets_by_cpu mpc8260)"
+
+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="$(targets_by_cpu mpc83xx)"
+
+#########################################################################
+## MPC85xx Systems (includes 8540, 8560 etc.)
+#########################################################################
+
+LIST_85xx="$(targets_by_cpu mpc85xx)"
+
+#########################################################################
+## MPC86xx Systems
+#########################################################################
+
+LIST_86xx="$(targets_by_cpu mpc86xx)"
+
+#########################################################################
+## 74xx/7xx Systems
+#########################################################################
+
+LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
+
+#########################################################################
+## PowerPC groups
+#########################################################################
+
+LIST_TSEC="		\
+	${LIST_83xx}	\
+	${LIST_85xx}	\
+	${LIST_86xx}	\
+"
+
+LIST_powerpc="		\
+	${LIST_5xx}	\
+	${LIST_512x}	\
+	${LIST_5xxx}	\
+	${LIST_8xx}	\
+	${LIST_824x}	\
+	${LIST_8260}	\
+	${LIST_83xx}	\
+	${LIST_85xx}	\
+	${LIST_86xx}	\
+	${LIST_4xx}	\
+	${LIST_74xx_7xx}\
+"
+
+# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
+# still using "ppc" instead of "powerpc"
+LIST_ppc="		\
+	${LIST_powerpc}	\
+"
+
+#########################################################################
+## StrongARM Systems
+#########################################################################
+
+LIST_SA="$(targets_by_cpu sa1100)"
+
+#########################################################################
+## ARM7 Systems
+#########################################################################
+
+LIST_ARM7="$(targets_by_cpu arm720t)"
+
+#########################################################################
+## ARM9 Systems
+#########################################################################
+
+LIST_ARM9="$(targets_by_cpu arm920t)	\
+	$(targets_by_cpu arm926ejs)	\
+	$(targets_by_cpu arm946es)	\
+"
+
+#########################################################################
+## ARM11 Systems
+#########################################################################
+LIST_ARM11="$(targets_by_cpu arm1136)	\
+	$(targets_by_cpu arm1176)	\
+"
+
+#########################################################################
+## ARMV7 Systems
+#########################################################################
+
+LIST_ARMV7="$(targets_by_cpu armv7)"
+
+#########################################################################
+## ARMV8 Systems
+#########################################################################
+
+LIST_ARMV8="$(targets_by_cpu armv8)"
+
+#########################################################################
+## AT91 Systems
+#########################################################################
+
+LIST_at91="$(targets_by_soc at91)"
+
+#########################################################################
+## Xscale Systems
+#########################################################################
+
+LIST_pxa="$(targets_by_cpu pxa)"
+
+#########################################################################
+## SPEAr Systems
+#########################################################################
+
+LIST_spear="$(targets_by_soc spear)"
+
+#########################################################################
+## ARM groups
+#########################################################################
+
+LIST_arm="$(targets_by_arch arm |		\
+	for ARMV8_TARGET in $LIST_ARMV8;	\
+		do sed "/$ARMV8_TARGET/d";	\
+	done)					\
+"
+
+#########################################################################
+## MIPS Systems		(default = big endian)
+#########################################################################
+
+LIST_mips="$(targets_by_arch mips)"
+
+#########################################################################
+## OpenRISC Systems
+#########################################################################
+
+LIST_openrisc="$(targets_by_arch openrisc)"
+
+#########################################################################
+## x86 Systems
+#########################################################################
+
+LIST_x86="$(targets_by_arch x86)"
+
+#########################################################################
+## Nios-II Systems
+#########################################################################
+
+LIST_nios2="$(targets_by_arch nios2)"
+
+#########################################################################
+## MicroBlaze Systems
+#########################################################################
+
+LIST_microblaze="$(targets_by_arch microblaze)"
+
+#########################################################################
+## ColdFire Systems
+#########################################################################
+
+LIST_m68k="$(targets_by_arch m68k)"
+LIST_coldfire=${LIST_m68k}
+
+#########################################################################
+## AVR32 Systems
+#########################################################################
+
+LIST_avr32="$(targets_by_arch avr32)"
+
+#########################################################################
+## Blackfin Systems
+#########################################################################
+
+LIST_blackfin="$(targets_by_arch blackfin)"
+
+#########################################################################
+## SH Systems
+#########################################################################
+
+LIST_sh2="$(targets_by_cpu sh2)"
+LIST_sh3="$(targets_by_cpu sh3)"
+LIST_sh4="$(targets_by_cpu sh4)"
+
+LIST_sh="$(targets_by_arch sh)"
+
+#########################################################################
+## SPARC Systems
+#########################################################################
+
+LIST_sparc="$(targets_by_arch sparc)"
+
+#########################################################################
+## NDS32 Systems
+#########################################################################
+
+LIST_nds32="$(targets_by_arch nds32)"
+
+#########################################################################
+## ARC Systems
+#########################################################################
+
+LIST_arc="$(targets_by_arch arc)"
+
+#-----------------------------------------------------------------------
+
+get_target_location() {
+	local target=$1
+	local BOARD_NAME=""
+	local CONFIG_NAME=""
+	local board=""
+	local vendor=""
+
+	# Automatic mode
+	local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+	if [ -z "${line}" ] ; then echo "" ; return ; fi
+
+	set ${line}
+
+	CONFIG_NAME="${7%_config}"
+
+	[ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
+
+	if [ $# -gt 5 ]; then
+		if [ "$6" = "-" ] ; then
+			board=${BOARD_NAME}
+		else
+			board="$6"
+		fi
+	fi
+
+	[ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
+	[ $# -gt 6 ] && [ "$8" != "-" ] && {
+		tmp="${8%:*}"
+		if [ "$tmp" ] ; then
+			CONFIG_NAME="$tmp"
+		fi
+	}
+
+	# Assign board directory to BOARDIR variable
+	if [ "${vendor}" == "-" ] ; then
+	    BOARDDIR=${board}
+	else
+	    BOARDDIR=${vendor}/${board}
+	fi
+
+	echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
+}
+
+get_target_maintainers() {
+	local name=`echo $1 | cut -d : -f 3`
+
+	local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+	if [ -z "${line}" ]; then
+		echo ""
+		return ;
+	fi
+
+	local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
+	[ "$mails" == "-" ] && mails=""
+	echo "$mails"
+}
+
+get_target_arch() {
+	local target=$1
+
+	# Automatic mode
+	local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+
+	if [ -z "${line}" ] ; then echo "" ; return ; fi
+
+	set ${line}
+	echo "$2"
+}
+
+list_target() {
+	if [ "$PRINT_MAINTS" != 'y' ] ; then
+		echo "$1"
+		return
+	fi
+
+	echo -n "$1:"
+
+	local loc=`get_target_location $1`
+
+	if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
+
+	local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
+
+	if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
+
+		local dir=`echo ${loc} | cut -d ":" -f 2`
+		local cfg=`echo ${loc} | cut -d ":" -f 1`
+		local git_result=`git log --format=%aE board/${dir} \
+				include/configs/${cfg}.h | grep "@"`
+		local git_result_recent=`echo ${git_result} | tr " " "\n" | \
+						head -n 3`
+		local git_result_top=`echo ${git_result} | tr " " "\n" | \
+			sort | uniq -c | sort -nr | head -n 3 | \
+			sed "s/^ \+[0-9]\+ \+//"`
+
+		echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
+			sort -u | tr "\n" " " | sed "s/ $//" ;
+	else
+		echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
+						sed "s/ $//" ;
+	fi
+
+	echo ""
+}
+
+# Each finished build will have a file called ${donep}${n},
+# where n is the index of the build. Each build
+# we've already noted as finished will have ${skipp}${n}.
+# The code managing the build process will use this information
+# to ensure that only BUILD_NBUILDS builds are in flight at once
+donep="${LOG_DIR}/._done_"
+skipp="${LOG_DIR}/._skip_"
+
+build_target_killed() {
+	echo "Aborted $target build."
+	# Remove the logs for this board since it was aborted
+	rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
+	exit
+}
+
+build_target() {
+	target=$1
+	build_idx=$2
+
+	if [ "$ONLY_LIST" == 'y' ] ; then
+		list_target ${target}
+		return
+	fi
+
+	if [ $BUILD_MANY == 1 ] ; then
+		output_dir="${OUTPUT_PREFIX}/${target}"
+		mkdir -p "${output_dir}"
+		trap build_target_killed TERM
+	else
+		output_dir="${OUTPUT_PREFIX}"
+	fi
+
+	target_arch=$(get_target_arch ${target})
+	eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
+	if [ "${cross_toolchain}" ] ; then
+	    MAKE="make CROSS_COMPILE=${cross_toolchain}"
+	elif [ "${CROSS_COMPILE}" ] ; then
+	    MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
+	else
+	    MAKE=make
+	fi
+
+	if [  "${output_dir}" != "." ] ; then
+		MAKE="${MAKE} O=${output_dir}"
+	fi
+
+	${MAKE} distclean >/dev/null
+	${MAKE} -s ${target}_config
+
+	${MAKE} ${JOBS} ${CHECK} all \
+		>${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
+
+	# Check for 'make' errors
+	if [ ${PIPESTATUS[0]} -ne 0 ] ; then
+		RC=1
+	fi
+
+	if [ $BUILD_MANY == 1 ] ; then
+		trap - TERM
+
+		${MAKE} -s clean
+
+		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+			cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
+		else
+			rm ${LOG_DIR}/${target}.ERR
+		fi
+	else
+		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+			if grep -iw error ${LOG_DIR}/${target}.ERR ; then
+				: $(( ERR_CNT += 1 ))
+				ERR_LIST="${ERR_LIST} $target"
+			else
+				: $(( WRN_CNT += 1 ))
+				WRN_LIST="${WRN_LIST} $target"
+			fi
+		else
+			rm ${LOG_DIR}/${target}.ERR
+		fi
+	fi
+
+	OBJS=${output_dir}/u-boot
+	if [ -e ${output_dir}/spl/u-boot-spl ]; then
+		OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
+	fi
+
+	${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
+
+	[ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
+
+	touch "${donep}${build_idx}"
+}
+
+manage_builds() {
+	search_idx=${OLDEST_IDX}
+	if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+	while true; do
+		if [ -e "${donep}${search_idx}" ] ; then
+			: $(( CURRENT_CNT-- ))
+			[ ${OLDEST_IDX} -eq ${search_idx} ] &&
+				: $(( OLDEST_IDX++ ))
+
+			# Only want to count it once
+			rm -f "${donep}${search_idx}"
+			touch "${skipp}${search_idx}"
+		elif [ -e "${skipp}${search_idx}" ] ; then
+			[ ${OLDEST_IDX} -eq ${search_idx} ] &&
+				: $(( OLDEST_IDX++ ))
+		fi
+		: $(( search_idx++ ))
+		if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
+			if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+				search_idx=${OLDEST_IDX}
+				sleep 1
+			else
+				break
+			fi
+		fi
+	done
+}
+
+build_targets() {
+	for t in "$@" ; do
+		# If a LIST_xxx var exists, use it.  But avoid variable
+		# expansion in the eval when a board name contains certain
+		# characters that the shell interprets.
+		case ${t} in
+			*[-+=]*) list= ;;
+			*)       list=$(eval echo '${LIST_'$t'}') ;;
+		esac
+		if [ -n "${list}" ] ; then
+			build_targets ${list}
+		else
+			: $((TOTAL_CNT += 1))
+			: $((CURRENT_CNT += 1))
+			rm -f "${donep}${TOTAL_CNT}"
+			rm -f "${skipp}${TOTAL_CNT}"
+			if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
+				: $((SKIP_CNT += 1))
+				touch "${donep}${TOTAL_CNT}"
+			elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
+				: $((SKIP_CNT += 1))
+				touch "${donep}${TOTAL_CNT}"
+			else
+				if [ $BUILD_MANY == 1 ] ; then
+					build_target ${t} ${TOTAL_CNT} &
+				else
+					CUR_TGT="${t}"
+					build_target ${t} ${TOTAL_CNT}
+					CUR_TGT=''
+				fi
+			fi
+		fi
+
+		# We maintain a running count of all the builds we have done.
+		# Each finished build will have a file called ${donep}${n},
+		# where n is the index of the build. Each build
+		# we've already noted as finished will have ${skipp}${n}.
+		# We track the current index via TOTAL_CNT, and the oldest
+		# index. When we exceed the maximum number of parallel builds,
+		# We look from oldest to current for builds that have completed,
+		# and update the current count and oldest index as appropriate.
+		# If we've gone through the entire list, wait a second, and
+		# reprocess the entire list until we find a build that has
+		# completed
+		if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+			manage_builds
+		fi
+	done
+}
+
+#-----------------------------------------------------------------------
+
+kill_children() {
+	local OS=$(uname -s)
+	local children=""
+	case "${OS}" in
+		"Darwin")
+			# Mac OS X is known to have BSD style ps
+			local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
+			children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
+			;;
+		*)
+			# everything else tries the GNU style
+			local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
+			children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
+			;;
+	esac
+
+	kill $children 2> /dev/null
+	wait $children 2> /dev/null
+
+	exit
+}
+
+print_stats() {
+	if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+	# Only count boards that completed
+	: $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
+
+	rm -f ${donep}* ${skipp}*
+
+	if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
+		ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
+		ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
+		ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
+		WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
+		WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
+		WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
+	else
+		# Remove the logs for any board that was interrupted
+		rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
+	fi
+
+	: $((TOTAL_CNT -= ${SKIP_CNT}))
+	echo ""
+	echo "--------------------- SUMMARY ----------------------------"
+	if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
+		echo "Boards skipped: ${SKIP_CNT}"
+	fi
+	echo "Boards compiled: ${TOTAL_CNT}"
+	if [ ${ERR_CNT} -gt 0 ] ; then
+		echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
+	fi
+	if [ ${WRN_CNT} -gt 0 ] ; then
+		echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
+	fi
+	echo "----------------------------------------------------------"
+
+	if [ $BUILD_MANY == 1 ] ; then
+		kill_children
+	fi
+
+	exit $RC
+}
+
+#-----------------------------------------------------------------------
+
+# Build target groups selected by options, plus any command line args
+set -- ${SELECTED} "$@"
+# run PowerPC by default
+[ $# = 0 ] && set -- powerpc
+build_targets "$@"
+wait