aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
blob: f79f2cfc5fc2d1309acebfeca7628cc8a9ba2955 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 11:15:12 +0100
Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver

Add the driver needed to make SPI work on Ralink SoC.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: John Crispin <blogic@openwrt.org>
---
 drivers/spi/Kconfig      |    6 +
 drivers/spi/Makefile     |    1 +
 drivers/spi/spi-rt2880.c |  530 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 537 insertions(+)
 create mode 100644 drivers/spi/spi-rt2880.c

--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -478,6 +478,12 @@ config SPI_QUP
 	  This driver can also be built as a module.  If so, the module
 	  will be called spi_qup.
 
+config SPI_RT2880
+	tristate "Ralink RT288x SPI Controller"
+	depends on RALINK
+	help
+	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
 	depends on ARCH_S3C24XX
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
 obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
+obj-$(CONFIG_SPI_RT2880)		+= spi-rt2880.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
 spi-s3c24xx-hw-y			:= spi-s3c24xx.o
 spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,530 @@
+/*
+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
+ *
+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts are based on spi-orion.c:
+ *   Author: Shadi Ammouri <shadi@marvell.com>
+ *   Copyright (C) 2007-2008 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/reset.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#define DRIVER_NAME			"spi-rt2880"
+
+#define RAMIPS_SPI_STAT			0x00
+#define RAMIPS_SPI_CFG			0x10
+#define RAMIPS_SPI_CTL			0x14
+#define RAMIPS_SPI_DATA			0x20
+#define RAMIPS_SPI_ADDR			0x24
+#define RAMIPS_SPI_BS			0x28
+#define RAMIPS_SPI_USER			0x2C
+#define RAMIPS_SPI_TXFIFO		0x30
+#define RAMIPS_SPI_RXFIFO		0x34
+#define RAMIPS_SPI_FIFO_STAT		0x38
+#define RAMIPS_SPI_MODE			0x3C
+#define RAMIPS_SPI_DEV_OFFSET		0x40
+#define RAMIPS_SPI_DMA			0x80
+#define RAMIPS_SPI_DMASTAT		0x84
+#define RAMIPS_SPI_ARBITER		0xF0
+
+/* SPISTAT register bit field */
+#define SPISTAT_BUSY			BIT(0)
+
+/* SPICFG register bit field */
+#define SPICFG_ADDRMODE			BIT(12)
+#define SPICFG_RXENVDIS			BIT(11)
+#define SPICFG_RXCAP			BIT(10)
+#define SPICFG_SPIENMODE		BIT(9)
+#define SPICFG_MSBFIRST			BIT(8)
+#define SPICFG_SPICLKPOL		BIT(6)
+#define SPICFG_RXCLKEDGE_FALLING	BIT(5)
+#define SPICFG_TXCLKEDGE_FALLING	BIT(4)
+#define SPICFG_HIZSPI			BIT(3)
+#define SPICFG_SPICLK_PRESCALE_MASK	0x7
+#define SPICFG_SPICLK_DIV2		0
+#define SPICFG_SPICLK_DIV4		1
+#define SPICFG_SPICLK_DIV8		2
+#define SPICFG_SPICLK_DIV16		3
+#define SPICFG_SPICLK_DIV32		4
+#define SPICFG_SPICLK_DIV64		5
+#define SPICFG_SPICLK_DIV128		6
+#define SPICFG_SPICLK_DISABLE		7
+
+/* SPICTL register bit field */
+#define SPICTL_START			BIT(4)
+#define SPICTL_HIZSDO			BIT(3)
+#define SPICTL_STARTWR			BIT(2)
+#define SPICTL_STARTRD			BIT(1)
+#define SPICTL_SPIENA			BIT(0)
+
+/* SPIUSER register bit field */
+#define SPIUSER_USERMODE		BIT(21)
+#define SPIUSER_INSTR_PHASE		BIT(20)
+#define SPIUSER_ADDR_PHASE_MASK		0x7
+#define SPIUSER_ADDR_PHASE_OFFSET	17
+#define SPIUSER_MODE_PHASE		BIT(16)
+#define SPIUSER_DUMMY_PHASE_MASK	0x3
+#define SPIUSER_DUMMY_PHASE_OFFSET	14
+#define SPIUSER_DATA_PHASE_MASK		0x3
+#define SPIUSER_DATA_PHASE_OFFSET	12
+#define SPIUSER_DATA_READ		(BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
+#define SPIUSER_DATA_WRITE		(BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
+#define SPIUSER_ADDR_TYPE_OFFSET	9
+#define SPIUSER_MODE_TYPE_OFFSET	6
+#define SPIUSER_DUMMY_TYPE_OFFSET	3
+#define SPIUSER_DATA_TYPE_OFFSET	0
+#define SPIUSER_TRANSFER_MASK		0x7
+#define SPIUSER_TRANSFER_SINGLE		BIT(0)
+#define SPIUSER_TRANSFER_DUAL		BIT(1)
+#define SPIUSER_TRANSFER_QUAD		BIT(2)
+
+#define SPIUSER_TRANSFER_TYPE(type) ( \
+	(type << SPIUSER_ADDR_TYPE_OFFSET) | \
+	(type << SPIUSER_MODE_TYPE_OFFSET) | \
+	(type << SPIUSER_DUMMY_TYPE_OFFSET) | \
+	(type << SPIUSER_DATA_TYPE_OFFSET) \
+)
+
+/* SPIFIFOSTAT register bit field */
+#define SPIFIFOSTAT_TXEMPTY		BIT(19)
+#define SPIFIFOSTAT_RXEMPTY		BIT(18)
+#define SPIFIFOSTAT_TXFULL		BIT(17)
+#define SPIFIFOSTAT_RXFULL		BIT(16)
+#define SPIFIFOSTAT_FIFO_MASK		0xff
+#define SPIFIFOSTAT_TX_OFFSET		8
+#define SPIFIFOSTAT_RX_OFFSET		0
+
+#define SPI_FIFO_DEPTH			16
+
+/* SPIMODE register bit field */
+#define SPIMODE_MODE_OFFSET		24
+#define SPIMODE_DUMMY_OFFSET		0
+
+/* SPIARB register bit field */
+#define SPICTL_ARB_EN			BIT(31)
+#define SPICTL_CSCTL1			BIT(16)
+#define SPI1_POR			BIT(1)
+#define SPI0_POR			BIT(0)
+
+#define RT2880_SPI_MODE_BITS	(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
+		SPI_CS_HIGH)
+
+static atomic_t hw_reset_count = ATOMIC_INIT(0);
+
+struct rt2880_spi {
+	struct spi_master	*master;
+	void __iomem		*base;
+	u32			speed;
+	u16			wait_loops;
+	u16			mode;
+	struct clk		*clk;
+};
+
+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
+{
+	return spi_master_get_devdata(spi->master);
+}
+
+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
+{
+	return ioread32(rs->base + reg);
+}
+
+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
+		const u32 val)
+{
+	iowrite32(val, rs->base + reg);
+}
+
+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
+{
+	void __iomem *addr = rs->base + reg;
+
+	iowrite32((ioread32(addr) | mask), addr);
+}
+
+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
+{
+	void __iomem *addr = rs->base + reg;
+
+	iowrite32((ioread32(addr) & ~mask), addr);
+}
+
+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
+{
+	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+	u32 rate;
+	u32 prescale;
+
+	/*
+	 * the supported rates are: 2, 4, 8, ... 128
+	 * round up as we look for equal or less speed
+	 */
+	rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
+	rate = roundup_pow_of_two(rate);
+
+	/* Convert the rate to SPI clock divisor value.	*/
+	prescale = ilog2(rate / 2);
+
+	/* some tolerance. double and add 100 */
+	rs->wait_loops = (8 * HZ * loops_per_jiffy) /
+		(clk_get_rate(rs->clk) / rate);
+	rs->wait_loops = (rs->wait_loops << 1) + 100;
+	rs->speed = speed;
+
+	dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
+			clk_get_rate(rs->clk) / rate, speed, rate, prescale,
+			rs->wait_loops);
+
+	return prescale;
+}
+
+static u32 get_arbiter_offset(struct spi_master *master)
+{
+	u32 offset;
+
+	offset = RAMIPS_SPI_ARBITER;
+	if (master->bus_num == 1)
+		offset -= RAMIPS_SPI_DEV_OFFSET;
+
+	return offset;
+}
+
+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
+{
+	struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+
+	if (enable)
+		rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+	else
+		rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+}
+
+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
+{
+	int loop = rs->wait_loops * len;
+
+	while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
+		cpu_relax();
+
+	if (loop)
+		return 0;
+
+	return -ETIMEDOUT;
+}
+
+static void rt2880_dump_reg(struct spi_master *master)
+{
+	struct rt2880_spi *rs = spi_master_get_devdata(master);
+
+	dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
+			"data: %08x, arb: %08x\n",
+			rt2880_spi_read(rs, RAMIPS_SPI_STAT),
+			rt2880_spi_read(rs, RAMIPS_SPI_CFG),
+			rt2880_spi_read(rs, RAMIPS_SPI_CTL),
+			rt2880_spi_read(rs, RAMIPS_SPI_DATA),
+			rt2880_spi_read(rs, get_arbiter_offset(master)));
+}
+
+static int rt2880_spi_transfer_one(struct spi_master *master,
+		struct spi_device *spi, struct spi_transfer *xfer)
+{
+	struct rt2880_spi *rs = spi_master_get_devdata(master);
+	unsigned len;
+	const u8 *tx = xfer->tx_buf;
+	u8 *rx = xfer->rx_buf;
+	int err = 0;
+
+	/* change clock speed  */
+	if (unlikely(rs->speed != xfer->speed_hz)) {
+		u32 reg;
+		reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
+		reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
+		reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
+		rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
+	}
+
+	if (tx) {
+		len = xfer->len;
+		while (len-- > 0) {
+			rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
+			rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
+			err = rt2880_spi_wait_ready(rs, 1);
+			if (err) {
+				dev_err(&spi->dev, "TX failed, err=%d\n", err);
+				goto out;
+			}
+		}
+	}
+
+	if (rx) {
+		len = xfer->len;
+		while (len-- > 0) {
+			rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
+			err = rt2880_spi_wait_ready(rs, 1);
+			if (err) {
+				dev_err(&spi->dev, "RX failed, err=%d\n", err);
+				goto out;
+			}
+			*rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
+		}
+	}
+
+out:
+	return err;
+}
+
+/* copy from spi.c */
+static void spi_set_cs(struct spi_device *spi, bool enable)
+{
+	if (spi->mode & SPI_CS_HIGH)
+		enable = !enable;
+
+	if (spi->cs_gpio >= 0)
+		gpio_set_value(spi->cs_gpio, !enable);
+	else if (spi->master->set_cs)
+		spi->master->set_cs(spi, !enable);
+}
+
+static int rt2880_spi_setup(struct spi_device *spi)
+{
+	struct spi_master *master = spi->master;
+	struct rt2880_spi *rs = spi_master_get_devdata(master);
+	u32 reg, old_reg, arbit_off;
+
+	if ((spi->max_speed_hz > master->max_speed_hz) ||
+			(spi->max_speed_hz < master->min_speed_hz)) {
+		dev_err(&spi->dev, "invalide requested speed %d Hz\n",
+				spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	if (!(master->bits_per_word_mask &
+				BIT(spi->bits_per_word - 1))) {
+		dev_err(&spi->dev, "invalide bits_per_word %d\n",
+				spi->bits_per_word);
+		return -EINVAL;
+	}
+
+	/* the hardware seems can't work on mode0 force it to mode3 */
+	if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
+		dev_warn(&spi->dev, "force spi mode3\n");
+		spi->mode |= SPI_MODE_3;
+	}
+
+	/* chip polarity */
+	arbit_off = get_arbiter_offset(master);
+	reg = old_reg = rt2880_spi_read(rs, arbit_off);
+	if (spi->mode & SPI_CS_HIGH) {
+		switch (master->bus_num) {
+		case 1:
+			reg |= SPI1_POR;
+			break;
+		default:
+			reg |= SPI0_POR;
+			break;
+		}
+	} else {
+		switch (master->bus_num) {
+		case 1:
+			reg &= ~SPI1_POR;
+			break;
+		default:
+			reg &= ~SPI0_POR;
+			break;
+		}
+	}
+
+	/* enable spi1 */
+	if (master->bus_num == 1)
+		reg |= SPICTL_ARB_EN;
+
+	if (reg != old_reg)
+		rt2880_spi_write(rs, arbit_off, reg);
+
+	/* deselected the spi device */
+	spi_set_cs(spi, false);
+
+	rt2880_dump_reg(master);
+
+	return 0;
+}
+
+static int rt2880_spi_prepare_message(struct spi_master *master,
+		struct spi_message *msg)
+{
+	struct rt2880_spi *rs = spi_master_get_devdata(master);
+	struct spi_device *spi = msg->spi;
+	u32 reg;
+
+	if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
+		return 0;
+
+#if 0
+	/* set spido to tri-state */
+	rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
+#endif
+
+	reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
+
+	reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
+			SPICFG_RXCLKEDGE_FALLING |
+			SPICFG_TXCLKEDGE_FALLING |
+			SPICFG_SPICLK_PRESCALE_MASK);
+
+	/* MSB */
+	if (!(spi->mode & SPI_LSB_FIRST))
+		reg |= SPICFG_MSBFIRST;
+
+	/* spi mode */
+	switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
+	case SPI_MODE_0:
+		reg |= SPICFG_TXCLKEDGE_FALLING;
+		break;
+	case SPI_MODE_1:
+		reg |= SPICFG_RXCLKEDGE_FALLING;
+		break;
+	case SPI_MODE_2:
+		reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
+		break;
+	case SPI_MODE_3:
+		reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
+		break;
+	}
+	rs->mode = spi->mode;
+
+#if 0
+	/* set spiclk and spiena to tri-state */
+	reg |= SPICFG_HIZSPI;
+#endif
+
+	/* clock divide */
+	reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
+
+	rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
+
+	return 0;
+}
+
+static int rt2880_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct rt2880_spi *rs;
+	void __iomem *base;
+	struct resource *r;
+	struct clk *clk;
+	int ret;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get SYS clock\n");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		goto err_clk;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*rs));
+	if (master == NULL) {
+		dev_dbg(&pdev->dev, "master allocation failed\n");
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+
+	master->dev.of_node = pdev->dev.of_node;
+	master->mode_bits = RT2880_SPI_MODE_BITS;
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	master->min_speed_hz = clk_get_rate(clk) / 128;
+	master->max_speed_hz = clk_get_rate(clk) / 2;
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->setup = rt2880_spi_setup;
+	master->prepare_message = rt2880_spi_prepare_message;
+	master->set_cs = rt2880_spi_set_cs;
+	master->transfer_one = rt2880_spi_transfer_one,
+
+	dev_set_drvdata(&pdev->dev, master);
+
+	rs = spi_master_get_devdata(master);
+	rs->master = master;
+	rs->base = base;
+	rs->clk = clk;
+
+	if (atomic_inc_return(&hw_reset_count) == 1)
+		device_reset(&pdev->dev);
+
+	ret = devm_spi_register_master(&pdev->dev, master);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "devm_spi_register_master error.\n");
+		goto err_master;
+	}
+
+	return ret;
+
+err_master:
+	spi_master_put(master);
+	kfree(master);
+err_clk:
+	clk_disable_unprepare(clk);
+
+	return ret;
+}
+
+static int rt2880_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct rt2880_spi *rs;
+
+	master = dev_get_drvdata(&pdev->dev);
+	rs = spi_master_get_devdata(master);
+
+	clk_disable_unprepare(rs->clk);
+	atomic_dec(&hw_reset_count);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static const struct of_device_id rt2880_spi_match[] = {
+	{ .compatible = "ralink,rt2880-spi" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
+
+static struct platform_driver rt2880_spi_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = rt2880_spi_match,
+	},
+	.probe = rt2880_spi_probe,
+	.remove = rt2880_spi_remove,
+};
+
+module_platform_driver(rt2880_spi_driver);
+
+MODULE_DESCRIPTION("Ralink SPI driver");
+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL");