blob: 51e51db3ecb66efcdfde55aef8b782aa1eb40ecb (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
|
/dts-v1/;
#include "mt7628an_netgear_r6xxx.dtsi"
/ {
compatible = "netgear,r6120", "mediatek,mt7628an-soc";
model = "Netgear R6120";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = ðernet;
};
leds {
compatible = "gpio-leds";
lan {
label = "r6120:green:lan";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "r6120:green:power";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
wlan2g_green {
label = "r6120:green:wlan2g";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan2g_orange {
label = "r6120:orange:wlan2g";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
wan_green {
label = "r6120:green:wan";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
};
wan_orange {
label = "r6120:orange:wan";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
};
usb-regulator {
compatible = "regulator-fixed";
regulator-name = "USB-power";
gpio = <&gpio 45 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
};
};
&state_default {
gpio {
groups = "p0led_an", "p1led_an", "p2led_an", "p3led_an",
"p4led_an", "wdt", "wled_an", "uart1";
function = "gpio";
};
};
&partitions {
partition@90000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x90000 0xf60000>;
};
partition@ff0000 {
label = "reserved";
reg = <0xff0000 0x10000>;
read-only;
};
};
&wifi5 {
mtd-mac-address = <&factory 0x4>;
mtd-mac-address-increment = <(2)>;
};
|
