1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
|
From c813fbe806257c574240770ef716fbee19f7dbfa Mon Sep 17 00:00:00 2001
From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Date: Thu, 6 Jun 2019 16:29:04 +0800
Subject: [PATCH] spi: spi-mem: Mediatek: Add SPI Nand support for MT7629
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
---
arch/arm/boot/dts/mt7629-rfb.dts | 45 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7629-lynx-rfb.dts | 45 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7629.dtsi | 22 ++++++++++++++++
drivers/spi/spi-mtk-snfi.c | 12 +++++++++
3 files changed, 79 insertions(+)
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -258,6 +258,51 @@
};
};
+&bch {
+ status = "okay";
+};
+
+&snfi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
+
+ spi_nand@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "Config";
+ reg = <0x100000 0x0040000>;
+ };
+
+ partition@140000 {
+ label = "factory";
+ reg = <0x140000 0x0080000>;
+ };
+
+ partition@1c0000 {
+ label = "firmware";
+ reg = <0x1c0000 0x1000000>;
+ };
+ };
+ };
+};
+
&spi {
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -259,6 +259,28 @@
status = "disabled";
};
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7622-ecc";
+ reg = <0x1100e000 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
+ snfi: spi@1100d000 {
+ compatible = "mediatek,mt7629-snfi";
+ reg = <0x1100d000 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_PD>,
+ <&pericfg CLK_PERI_SNFI_PD>;
+ clock-names = "nfi_clk", "spi_clk";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi: spi@1100a000 {
compatible = "mediatek,mt7629-spi",
"mediatek,mt7622-spi";
--- a/drivers/spi/spi-mtk-snfi.c
+++ b/drivers/spi/spi-mtk-snfi.c
@@ -1029,8 +1029,20 @@ static const struct mtk_snfi_caps snfi_m
.bad_mark_swap = 0,
};
+static const struct mtk_snfi_caps snfi_mt7629 = {
+ .spare_size = spare_size_mt7622,
+ .num_spare_size = 4,
+ .nand_sec_size = 512,
+ .nand_fdm_size = 8,
+ .nand_fdm_ecc_size = 1,
+ .ecc_parity_bits = 13,
+ .pageformat_spare_shift = 4,
+ .bad_mark_swap = 1,
+};
+
static const struct of_device_id mtk_snfi_id_table[] = {
{ .compatible = "mediatek,mt7622-snfi", .data = &snfi_mt7622, },
+ { .compatible = "mediatek,mt7629-snfi", .data = &snfi_mt7629, },
{ /* sentinel */ }
};
--- a/arch/arm/boot/dts/mt7629-lynx-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-lynx-rfb.dts
@@ -281,6 +281,52 @@
};
};
+&bch {
+ status = "okay";
+};
+
+&snfi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
+
+ spi_nand@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "Config";
+ reg = <0x100000 0x0040000>;
+ };
+
+ partition@140000 {
+ label = "factory";
+ reg = <0x140000 0x0080000>;
+ };
+
+ partition@1c0000 {
+ label = "firmware";
+ reg = <0x1c0000 0x1000000>;
+ };
+
+ };
+ };
+};
+
&spi {
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;
|
