1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
From c40bb4fedcd6b8b6a714da5dd466eb88ed2652d1 Mon Sep 17 00:00:00 2001
From: Aleksander Jan Bajkowski <olek2@wp.pl>
Date: Wed, 9 Mar 2022 00:04:57 +0100
Subject: net: dsa: lantiq_gswip: enable jumbo frames on GSWIP
This enables non-standard MTUs on a per-port basis, with the overall
frame size set based on the CPU port.
When the MTU is not changed, this should have no effect.
Long packets crash the switch with MTUs of greater than 2526, so the
maximum is limited for now. Medium packets are sometimes dropped (e.g.
TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value
of 2400 seems safe.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 49 insertions(+), 4 deletions(-)
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -213,6 +213,7 @@
#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001
#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002
#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */
#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */
/* Ethernet Switch Fetch DMA Port Control Register */
@@ -239,6 +240,15 @@
#define XRX200_GPHY_FW_ALIGN (16 * 1024)
+/* Maximum packet size supported by the switch. In theory this should be 10240,
+ * but long packets currently cause lock-ups with an MTU of over 2526. Medium
+ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP
+ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects
+ * packet reception. This is probably caused by the PPA engine, which is on the
+ * RX part of the device. Packet transmission works properly up to 10240.
+ */
+#define GSWIP_MAX_PACKET_LENGTH 2400
+
struct gswip_hw_info {
int max_ports;
int cpu_port;
@@ -858,10 +868,6 @@ static int gswip_setup(struct dsa_switch
gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
GSWIP_PCE_PCTRL_0p(cpu_port));
- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
- GSWIP_MAC_CTRL_2p(cpu_port));
- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN,
- GSWIP_MAC_FLEN);
gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
GSWIP_BM_QUEUE_GCTRL);
@@ -878,6 +884,8 @@ static int gswip_setup(struct dsa_switch
return err;
}
+ ds->mtu_enforcement_ingress = true;
+
gswip_port_enable(ds, cpu_port, NULL);
return 0;
}
@@ -1472,6 +1480,39 @@ static void gswip_phylink_set_capab(unsi
__ETHTOOL_LINK_MODE_MASK_NBITS);
}
+static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ /* Includes 8 bytes for special header. */
+ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN;
+}
+
+static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct gswip_priv *priv = ds->priv;
+ int cpu_port = priv->hw_info->cpu_port;
+
+ /* CPU port always has maximum mtu of user ports, so use it to set
+ * switch frame size, including 8 byte special header.
+ */
+ if (port == cpu_port) {
+ new_mtu += 8;
+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
+ GSWIP_MAC_FLEN);
+ }
+
+ /* Enable MLEN for ports with non-standard MTUs, including the special
+ * header on the CPU port added above.
+ */
+ if (new_mtu != ETH_DATA_LEN)
+ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
+ GSWIP_MAC_CTRL_2p(port));
+ else
+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0,
+ GSWIP_MAC_CTRL_2p(port));
+
+ return 0;
+}
+
static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
@@ -1829,6 +1870,8 @@ static const struct dsa_switch_ops gswip
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
+ .port_change_mtu = gswip_port_change_mtu,
+ .port_max_mtu = gswip_port_max_mtu,
.phylink_validate = gswip_xrx200_phylink_validate,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
@@ -1853,6 +1896,8 @@ static const struct dsa_switch_ops gswip
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
+ .port_change_mtu = gswip_port_change_mtu,
+ .port_max_mtu = gswip_port_max_mtu,
.phylink_validate = gswip_xrx300_phylink_validate,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
|
