path: root/target/linux/ipq806x/patches-4.1/701-stmmac_update_to_4.3.patch

--- a/drivers/net/ethernet/stmicro/Kconfig
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -7,9 +7,7 @@ config NET_VENDOR_STMICRO
 	default y
 	depends on HAS_IOMEM
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -16,6 +16,7 @@ if STMMAC_ETH
 config STMMAC_PLATFORM
 	tristate "STMMAC Platform bus support"
 	depends on STMMAC_ETH
+	select MFD_SYSCON
 	default y
 	---help---
 	  This selects the platform specific bus support for the stmmac driver.
@@ -26,6 +27,95 @@ config STMMAC_PLATFORM
 
 	  If unsure, say N.
 
+if STMMAC_PLATFORM
+
+config DWMAC_GENERIC
+	tristate "Generic driver for DWMAC"
+	default STMMAC_PLATFORM
+	---help---
+	  Generic DWMAC driver for platforms that don't require any
+	  platform specific code to function or is using platform
+	  data for setup.
+
+config DWMAC_IPQ806X
+	tristate "QCA IPQ806x DWMAC support"
+	default ARCH_QCOM
+	depends on OF
+	select MFD_SYSCON
+	help
+	  Support for QCA IPQ806X DWMAC Ethernet.
+
+	  This selects the IPQ806x SoC glue layer support for the stmmac
+	  device driver. This driver does not use any of the hardware
+	  acceleration features available on this SoC. Network devices
+	  will behave like standard non-accelerated ethernet interfaces.
+
+config DWMAC_LPC18XX
+	tristate "NXP LPC18xx/43xx DWMAC support"
+	default ARCH_LPC18XX
+	depends on OF
+	select MFD_SYSCON
+	---help---
+	  Support for NXP LPC18xx/43xx DWMAC Ethernet.
+
+config DWMAC_MESON
+	tristate "Amlogic Meson dwmac support"
+	default ARCH_MESON
+	depends on OF
+	help
+	  Support for Ethernet controller on Amlogic Meson SoCs.
+
+	  This selects the Amlogic Meson SoC glue layer support for
+	  the stmmac device driver. This driver is used for Meson6 and
+	  Meson8 SoCs.
+
+config DWMAC_ROCKCHIP
+	tristate "Rockchip dwmac support"
+	default ARCH_ROCKCHIP
+	depends on OF
+	select MFD_SYSCON
+	help
+	  Support for Ethernet controller on Rockchip RK3288 SoC.
+
+	  This selects the Rockchip RK3288 SoC glue layer support for
+	  the stmmac device driver.
+
+config DWMAC_SOCFPGA
+	tristate "SOCFPGA dwmac support"
+	default ARCH_SOCFPGA
+	depends on OF
+	select MFD_SYSCON
+	help
+	  Support for ethernet controller on Altera SOCFPGA
+
+	  This selects the Altera SOCFPGA SoC glue layer support
+	  for the stmmac device driver. This driver is used for
+	  arria5 and cyclone5 FPGA SoCs.
+
+config DWMAC_STI
+	tristate "STi GMAC support"
+	default ARCH_STI
+	depends on OF
+	select MFD_SYSCON
+	---help---
+	  Support for ethernet controller on STi SOCs.
+
+	  This selects STi SoC glue layer support for the stmmac
+	  device driver. This driver is used on for the STi series
+	  SOCs GMAC ethernet controller.
+
+config DWMAC_SUNXI
+	tristate "Allwinner GMAC support"
+	default ARCH_SUNXI
+	depends on OF
+	---help---
+	  Support for Allwinner A20/A31 GMAC ethernet controllers.
+
+	  This selects Allwinner SoC glue layer support for the
+	  stmmac device driver. This driver is used for A20/A31
+	  GMAC ethernet controller.
+endif
+
 config STMMAC_PCI
 	tristate "STMMAC PCI bus support"
 	depends on STMMAC_ETH && PCI
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -4,9 +4,17 @@ stmmac-objs:= stmmac_main.o stmmac_ethto
 	      dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o	\
 	      mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y)
 
-obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
-stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o	\
-		       dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
+# Ordering matters. Generic driver must be last.
+obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o
+obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
+obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
+obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o
+obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
+obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-socfpga.o
+obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
+obj-$(CONFIG_DWMAC_SUNXI)	+= dwmac-sunxi.o
+obj-$(CONFIG_DWMAC_GENERIC)	+= dwmac-generic.o
+stmmac-platform-objs:= stmmac_platform.o
 
 obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
 stmmac-pci-objs:= stmmac_pci.o
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
@@ -0,0 +1,81 @@
+/*
+ * Generic DWMAC platform driver
+ *
+ * Copyright (C) 2007-2011  STMicroelectronics Ltd
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "stmmac.h"
+#include "stmmac_platform.h"
+
+static int dwmac_generic_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	if (pdev->dev.of_node) {
+		plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+		if (IS_ERR(plat_dat)) {
+			dev_err(&pdev->dev, "dt configuration failed\n");
+			return PTR_ERR(plat_dat);
+		}
+	} else {
+		plat_dat = dev_get_platdata(&pdev->dev);
+		if (!plat_dat) {
+			dev_err(&pdev->dev, "no platform data provided\n");
+			return  -EINVAL;
+		}
+
+		/* Set default value for multicast hash bins */
+		plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+		/* Set default value for unicast filter entries */
+		plat_dat->unicast_filter_entries = 1;
+	}
+
+	/* Custom initialisation (if needed) */
+	if (plat_dat->init) {
+		ret = plat_dat->init(pdev, plat_dat->bsp_priv);
+		if (ret)
+			return ret;
+	}
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id dwmac_generic_match[] = {
+	{ .compatible = "st,spear600-gmac"},
+	{ .compatible = "snps,dwmac-3.610"},
+	{ .compatible = "snps,dwmac-3.70a"},
+	{ .compatible = "snps,dwmac-3.710"},
+	{ .compatible = "snps,dwmac"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dwmac_generic_match);
+
+static struct platform_driver dwmac_generic_driver = {
+	.probe  = dwmac_generic_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = STMMAC_RESOURCE_NAME,
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = of_match_ptr(dwmac_generic_match),
+	},
+};
+module_platform_driver(dwmac_generic_driver);
+
+MODULE_DESCRIPTION("Generic dwmac driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -0,0 +1,373 @@
+/*
+ * Qualcomm Atheros IPQ806x GMAC glue layer
+ *
+ * Copyright (C) 2015 The Linux Foundation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/stmmac.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+
+#include "stmmac_platform.h"
+
+#define NSS_COMMON_CLK_GATE			0x8
+#define NSS_COMMON_CLK_GATE_PTP_EN(x)		BIT(0x10 + x)
+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x)	BIT(0x9 + (x * 2))
+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x)	BIT(0x8 + (x * 2))
+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x)	BIT(0x4 + x)
+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x)	BIT(0x0 + x)
+
+#define NSS_COMMON_CLK_DIV0			0xC
+#define NSS_COMMON_CLK_DIV_OFFSET(x)		(x * 8)
+#define NSS_COMMON_CLK_DIV_MASK			0x7f
+
+#define NSS_COMMON_CLK_SRC_CTRL			0x14
+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x)	(x)
+/* Mode is coded on 1 bit but is different depending on the MAC ID:
+ * MAC0: QSGMII=0 RGMII=1
+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
+ * MAC2 & MAC3: QSGMII=0 SGMII=1
+ */
+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x)	1
+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x)	((x >= 2) ? 1 : 0)
+
+#define NSS_COMMON_MACSEC_CTL			0x28
+#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x)	(1 << x)
+
+#define NSS_COMMON_GMAC_CTL(x)			(0x30 + (x * 4))
+#define NSS_COMMON_GMAC_CTL_CSYS_REQ		BIT(19)
+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL	BIT(16)
+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET	8
+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET		0
+#define NSS_COMMON_GMAC_CTL_IFG_MASK		0x3f
+
+#define NSS_COMMON_CLK_DIV_RGMII_1000		1
+#define NSS_COMMON_CLK_DIV_RGMII_100		9
+#define NSS_COMMON_CLK_DIV_RGMII_10		99
+#define NSS_COMMON_CLK_DIV_SGMII_1000		0
+#define NSS_COMMON_CLK_DIV_SGMII_100		4
+#define NSS_COMMON_CLK_DIV_SGMII_10		49
+
+#define QSGMII_PCS_MODE_CTL			0x68
+#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x)	BIT((x * 8) + 7)
+
+#define QSGMII_PCS_CAL_LCKDT_CTL		0x120
+#define QSGMII_PCS_CAL_LCKDT_CTL_RST		BIT(19)
+
+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
+#define QSGMII_PHY_SGMII_CTL(x)			((x == 1) ? 0x134 : \
+						 (0x13c + (4 * (x - 2))))
+#define QSGMII_PHY_CDR_EN			BIT(0)
+#define QSGMII_PHY_RX_FRONT_EN			BIT(1)
+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN		BIT(2)
+#define QSGMII_PHY_TX_DRIVER_EN			BIT(3)
+#define QSGMII_PHY_QSGMII_EN			BIT(7)
+#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET	12
+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK		0x7
+#define QSGMII_PHY_RX_DC_BIAS_OFFSET		18
+#define QSGMII_PHY_RX_DC_BIAS_MASK		0x3
+#define QSGMII_PHY_RX_INPUT_EQU_OFFSET		20
+#define QSGMII_PHY_RX_INPUT_EQU_MASK		0x3
+#define QSGMII_PHY_CDR_PI_SLEW_OFFSET		22
+#define QSGMII_PHY_CDR_PI_SLEW_MASK		0x3
+#define QSGMII_PHY_TX_DRV_AMP_OFFSET		28
+#define QSGMII_PHY_TX_DRV_AMP_MASK		0xf
+
+struct ipq806x_gmac {
+	struct platform_device *pdev;
+	struct regmap *nss_common;
+	struct regmap *qsgmii_csr;
+	uint32_t id;
+	struct clk *core_clk;
+	phy_interface_t phy_mode;
+};
+
+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int div;
+
+	switch (speed) {
+	case SPEED_1000:
+		div = NSS_COMMON_CLK_DIV_SGMII_1000;
+		break;
+
+	case SPEED_100:
+		div = NSS_COMMON_CLK_DIV_SGMII_100;
+		break;
+
+	case SPEED_10:
+		div = NSS_COMMON_CLK_DIV_SGMII_10;
+		break;
+
+	default:
+		dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
+		return -EINVAL;
+	}
+
+	return div;
+}
+
+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int div;
+
+	switch (speed) {
+	case SPEED_1000:
+		div = NSS_COMMON_CLK_DIV_RGMII_1000;
+		break;
+
+	case SPEED_100:
+		div = NSS_COMMON_CLK_DIV_RGMII_100;
+		break;
+
+	case SPEED_10:
+		div = NSS_COMMON_CLK_DIV_RGMII_10;
+		break;
+
+	default:
+		dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
+		return -EINVAL;
+	}
+
+	return div;
+}
+
+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	uint32_t clk_bits, val;
+	int div;
+
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		div = get_clk_div_rgmii(gmac, speed);
+		clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			   NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+
+	case PHY_INTERFACE_MODE_SGMII:
+		div = get_clk_div_sgmii(gmac, speed);
+		clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+			   NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+
+	default:
+		dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return -EINVAL;
+	}
+
+	/* Disable the clocks */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val &= ~clk_bits;
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	/* Set the divider */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
+	val &= ~(NSS_COMMON_CLK_DIV_MASK
+		 << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
+	val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
+
+	/* Enable the clock back */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val |= clk_bits;
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	return 0;
+}
+
+static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
+{
+	struct device *dev = &gmac->pdev->dev;
+
+	gmac->phy_mode = of_get_phy_mode(dev->of_node);
+	if (gmac->phy_mode < 0) {
+		dev_err(dev, "missing phy mode property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
+		dev_err(dev, "missing qcom id property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* The GMACs are called 1 to 4 in the documentation, but to simplify the
+	 * code and keep it consistent with the Linux convention, we'll number
+	 * them from 0 to 3 here.
+	 */
+	if (gmac->id < 0 || gmac->id > 3) {
+		dev_err(dev, "invalid gmac id\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	gmac->core_clk = devm_clk_get(dev, "stmmaceth");
+	if (IS_ERR(gmac->core_clk)) {
+		dev_err(dev, "missing stmmaceth clk property\n");
+		return gmac->core_clk;
+	}
+	clk_set_rate(gmac->core_clk, 266000000);
+
+	/* Setup the register map for the nss common registers */
+	gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
+							   "qcom,nss-common");
+	if (IS_ERR(gmac->nss_common)) {
+		dev_err(dev, "missing nss-common node\n");
+		return gmac->nss_common;
+	}
+
+	/* Setup the register map for the qsgmii csr registers */
+	gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
+							   "qcom,qsgmii-csr");
+	if (IS_ERR(gmac->qsgmii_csr)) {
+		dev_err(dev, "missing qsgmii-csr node\n");
+		return gmac->qsgmii_csr;
+	}
+
+	return NULL;
+}
+
+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+	struct ipq806x_gmac *gmac = priv;
+
+	ipq806x_gmac_set_speed(gmac, speed);
+}
+
+static int ipq806x_gmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
+	struct ipq806x_gmac *gmac;
+	int val;
+	void *err;
+
+	val = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (val)
+		return val;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac)
+		return -ENOMEM;
+
+	gmac->pdev = pdev;
+
+	err = ipq806x_gmac_of_parse(gmac);
+	if (IS_ERR(err)) {
+		dev_err(dev, "device tree parsing error\n");
+		return PTR_ERR(err);
+	}
+
+	regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
+		     QSGMII_PCS_CAL_LCKDT_CTL_RST);
+
+	/* Inter frame gap is set to 12 */
+	val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
+	      12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
+	/* We also initiate an AXI low power exit request */
+	val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return -EINVAL;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
+
+	/* Configure the clock src according to the mode */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
+	val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id));
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return -EINVAL;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
+
+	/* Enable PTP clock */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
+		regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
+			     QSGMII_PHY_CDR_EN |
+			     QSGMII_PHY_RX_FRONT_EN |
+			     QSGMII_PHY_RX_SIGNAL_DETECT_EN |
+			     QSGMII_PHY_TX_DRIVER_EN |
+			     QSGMII_PHY_QSGMII_EN |
+			     0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+			     0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+			     0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+			     0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+			     0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+	}
+
+	plat_dat->has_gmac = true;
+	plat_dat->bsp_priv = gmac;
+	plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id ipq806x_gmac_dwmac_match[] = {
+	{ .compatible = "qcom,ipq806x-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match);
+
+static struct platform_driver ipq806x_gmac_dwmac_driver = {
+	.probe = ipq806x_gmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name		= "ipq806x-gmac-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table	= ipq806x_gmac_dwmac_match,
+	},
+};
+module_platform_driver(ipq806x_gmac_dwmac_driver);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer");
+MODULE_LICENSE("Dual BSD/GPL");
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
@@ -0,0 +1,86 @@
+/*
+ * DWMAC glue for NXP LPC18xx/LPC43xx Ethernet
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+/* Register defines for CREG syscon */
+#define LPC18XX_CREG_CREG6			0x12c
+# define LPC18XX_CREG_CREG6_ETHMODE_MASK	0x7
+# define LPC18XX_CREG_CREG6_ETHMODE_MII		0x0
+# define LPC18XX_CREG_CREG6_ETHMODE_RMII	0x4
+
+static int lpc18xx_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct regmap *reg;
+	u8 ethmode;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	plat_dat->has_gmac = true;
+
+	reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
+	if (IS_ERR(reg)) {
+		dev_err(&pdev->dev, "syscon lookup failed\n");
+		return PTR_ERR(reg);
+	}
+
+	if (plat_dat->interface == PHY_INTERFACE_MODE_MII) {
+		ethmode = LPC18XX_CREG_CREG6_ETHMODE_MII;
+	} else if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) {
+		ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII;
+	} else {
+		dev_err(&pdev->dev, "Only MII and RMII mode supported\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(reg, LPC18XX_CREG_CREG6,
+			   LPC18XX_CREG_CREG6_ETHMODE_MASK, ethmode);
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id lpc18xx_dwmac_match[] = {
+	{ .compatible = "nxp,lpc1850-dwmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_dwmac_match);
+
+static struct platform_driver lpc18xx_dwmac_driver = {
+	.probe  = lpc18xx_dwmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "lpc18xx-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = lpc18xx_dwmac_match,
+	},
+};
+module_platform_driver(lpc18xx_dwmac_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("DWMAC glue for LPC18xx/43xx Ethernet");
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
@@ -15,6 +15,7 @@
 #include <linux/ethtool.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/stmmac.h>
 
@@ -46,24 +47,54 @@ static void meson6_dwmac_fix_mac_speed(v
 	writel(val, dwmac->reg);
 }
 
-static void *meson6_dwmac_setup(struct platform_device *pdev)
+static int meson6_dwmac_probe(struct platform_device *pdev)
 {
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
 	struct meson_dwmac *dwmac;
 	struct resource *res;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
 
 	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
 	if (!dwmac)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	dwmac->reg = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(dwmac->reg))
-		return ERR_CAST(dwmac->reg);
+		return PTR_ERR(dwmac->reg);
+
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->fix_mac_speed = meson6_dwmac_fix_mac_speed;
 
-	return dwmac;
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 }
 
-const struct stmmac_of_data meson6_dwmac_data = {
-	.setup		= meson6_dwmac_setup,
-	.fix_mac_speed	= meson6_dwmac_fix_mac_speed,
+static const struct of_device_id meson6_dwmac_match[] = {
+	{ .compatible = "amlogic,meson6-dwmac" },
+	{ }
 };
+MODULE_DEVICE_TABLE(of, meson6_dwmac_match);
+
+static struct platform_driver meson6_dwmac_driver = {
+	.probe  = meson6_dwmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "meson6-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = meson6_dwmac_match,
+	},
+};
+module_platform_driver(meson6_dwmac_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("Amlogic Meson DWMAC glue layer");
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -22,17 +22,31 @@
 #include <linux/phy.h>
 #include <linux/of_net.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#include "stmmac_platform.h"
+
+struct rk_priv_data;
+struct rk_gmac_ops {
+	void (*set_to_rgmii)(struct rk_priv_data *bsp_priv,
+			     int tx_delay, int rx_delay);
+	void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
+	void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+	void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+};
+
 struct rk_priv_data {
 	struct platform_device *pdev;
 	int phy_iface;
 	struct regulator *regulator;
+	const struct rk_gmac_ops *ops;
 
 	bool clk_enabled;
 	bool clock_input;
@@ -60,103 +74,228 @@ struct rk_priv_data {
 
 #define RK3288_GRF_SOC_CON1	0x0248
 #define RK3288_GRF_SOC_CON3	0x0250
-#define RK3288_GRF_GPIO3D_E	0x01ec
-#define RK3288_GRF_GPIO4A_E	0x01f0
-#define RK3288_GRF_GPIO4B_E	0x01f4
 
 /*RK3288_GRF_SOC_CON1*/
-#define GMAC_PHY_INTF_SEL_RGMII	(GRF_BIT(6) | GRF_CLR_BIT(7) | GRF_CLR_BIT(8))
-#define GMAC_PHY_INTF_SEL_RMII	(GRF_CLR_BIT(6) | GRF_CLR_BIT(7) | GRF_BIT(8))
-#define GMAC_FLOW_CTRL		GRF_BIT(9)
-#define GMAC_FLOW_CTRL_CLR	GRF_CLR_BIT(9)
-#define GMAC_SPEED_10M		GRF_CLR_BIT(10)
-#define GMAC_SPEED_100M		GRF_BIT(10)
-#define GMAC_RMII_CLK_25M	GRF_BIT(11)
-#define GMAC_RMII_CLK_2_5M	GRF_CLR_BIT(11)
-#define GMAC_CLK_125M		(GRF_CLR_BIT(12) | GRF_CLR_BIT(13))
-#define GMAC_CLK_25M		(GRF_BIT(12) | GRF_BIT(13))
-#define GMAC_CLK_2_5M		(GRF_CLR_BIT(12) | GRF_BIT(13))
-#define GMAC_RMII_MODE		GRF_BIT(14)
-#define GMAC_RMII_MODE_CLR	GRF_CLR_BIT(14)
+#define RK3288_GMAC_PHY_INTF_SEL_RGMII	(GRF_BIT(6) | GRF_CLR_BIT(7) | \
+					 GRF_CLR_BIT(8))
+#define RK3288_GMAC_PHY_INTF_SEL_RMII	(GRF_CLR_BIT(6) | GRF_CLR_BIT(7) | \
+					 GRF_BIT(8))
+#define RK3288_GMAC_FLOW_CTRL		GRF_BIT(9)
+#define RK3288_GMAC_FLOW_CTRL_CLR	GRF_CLR_BIT(9)
+#define RK3288_GMAC_SPEED_10M		GRF_CLR_BIT(10)
+#define RK3288_GMAC_SPEED_100M		GRF_BIT(10)
+#define RK3288_GMAC_RMII_CLK_25M	GRF_BIT(11)
+#define RK3288_GMAC_RMII_CLK_2_5M	GRF_CLR_BIT(11)
+#define RK3288_GMAC_CLK_125M		(GRF_CLR_BIT(12) | GRF_CLR_BIT(13))
+#define RK3288_GMAC_CLK_25M		(GRF_BIT(12) | GRF_BIT(13))
+#define RK3288_GMAC_CLK_2_5M		(GRF_CLR_BIT(12) | GRF_BIT(13))
+#define RK3288_GMAC_RMII_MODE		GRF_BIT(14)
+#define RK3288_GMAC_RMII_MODE_CLR	GRF_CLR_BIT(14)
 
 /*RK3288_GRF_SOC_CON3*/
-#define GMAC_TXCLK_DLY_ENABLE	GRF_BIT(14)
-#define GMAC_TXCLK_DLY_DISABLE	GRF_CLR_BIT(14)
-#define GMAC_RXCLK_DLY_ENABLE	GRF_BIT(15)
-#define GMAC_RXCLK_DLY_DISABLE	GRF_CLR_BIT(15)
-#define GMAC_CLK_RX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 7)
-#define GMAC_CLK_TX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 0)
+#define RK3288_GMAC_TXCLK_DLY_ENABLE	GRF_BIT(14)
+#define RK3288_GMAC_TXCLK_DLY_DISABLE	GRF_CLR_BIT(14)
+#define RK3288_GMAC_RXCLK_DLY_ENABLE	GRF_BIT(15)
+#define RK3288_GMAC_RXCLK_DLY_DISABLE	GRF_CLR_BIT(15)
+#define RK3288_GMAC_CLK_RX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 7)
+#define RK3288_GMAC_CLK_TX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 0)
 
-static void set_to_rgmii(struct rk_priv_data *bsp_priv,
-			 int tx_delay, int rx_delay)
+static void rk3288_set_to_rgmii(struct rk_priv_data *bsp_priv,
+				int tx_delay, int rx_delay)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (IS_ERR(bsp_priv->grf)) {
-		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		dev_err(dev, "Missing rockchip,grf property\n");
 		return;
 	}
 
 	regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
-		     GMAC_PHY_INTF_SEL_RGMII | GMAC_RMII_MODE_CLR);
+		     RK3288_GMAC_PHY_INTF_SEL_RGMII |
+		     RK3288_GMAC_RMII_MODE_CLR);
 	regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
-		     GMAC_RXCLK_DLY_ENABLE | GMAC_TXCLK_DLY_ENABLE |
-		     GMAC_CLK_RX_DL_CFG(rx_delay) |
-		     GMAC_CLK_TX_DL_CFG(tx_delay));
+		     RK3288_GMAC_RXCLK_DLY_ENABLE |
+		     RK3288_GMAC_TXCLK_DLY_ENABLE |
+		     RK3288_GMAC_CLK_RX_DL_CFG(rx_delay) |
+		     RK3288_GMAC_CLK_TX_DL_CFG(tx_delay));
 }
 
-static void set_to_rmii(struct rk_priv_data *bsp_priv)
+static void rk3288_set_to_rmii(struct rk_priv_data *bsp_priv)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (IS_ERR(bsp_priv->grf)) {
-		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		dev_err(dev, "Missing rockchip,grf property\n");
 		return;
 	}
 
 	regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
-		     GMAC_PHY_INTF_SEL_RMII | GMAC_RMII_MODE);
+		     RK3288_GMAC_PHY_INTF_SEL_RMII | RK3288_GMAC_RMII_MODE);
 }
 
-static void set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+static void rk3288_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (IS_ERR(bsp_priv->grf)) {
-		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		dev_err(dev, "Missing rockchip,grf property\n");
 		return;
 	}
 
 	if (speed == 10)
-		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_2_5M);
+		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+			     RK3288_GMAC_CLK_2_5M);
 	else if (speed == 100)
-		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_25M);
+		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+			     RK3288_GMAC_CLK_25M);
 	else if (speed == 1000)
-		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_125M);
+		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+			     RK3288_GMAC_CLK_125M);
 	else
 		dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
 }
 
-static void set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+static void rk3288_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (IS_ERR(bsp_priv->grf)) {
-		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		dev_err(dev, "Missing rockchip,grf property\n");
 		return;
 	}
 
 	if (speed == 10) {
 		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
-			     GMAC_RMII_CLK_2_5M | GMAC_SPEED_10M);
+			     RK3288_GMAC_RMII_CLK_2_5M |
+			     RK3288_GMAC_SPEED_10M);
 	} else if (speed == 100) {
 		regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
-			     GMAC_RMII_CLK_25M | GMAC_SPEED_100M);
+			     RK3288_GMAC_RMII_CLK_25M |
+			     RK3288_GMAC_SPEED_100M);
+	} else {
+		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+	}
+}
+
+static const struct rk_gmac_ops rk3288_ops = {
+	.set_to_rgmii = rk3288_set_to_rgmii,
+	.set_to_rmii = rk3288_set_to_rmii,
+	.set_rgmii_speed = rk3288_set_rgmii_speed,
+	.set_rmii_speed = rk3288_set_rmii_speed,
+};
+
+#define RK3368_GRF_SOC_CON15	0x043c
+#define RK3368_GRF_SOC_CON16	0x0440
+
+/* RK3368_GRF_SOC_CON15 */
+#define RK3368_GMAC_PHY_INTF_SEL_RGMII	(GRF_BIT(9) | GRF_CLR_BIT(10) | \
+					 GRF_CLR_BIT(11))
+#define RK3368_GMAC_PHY_INTF_SEL_RMII	(GRF_CLR_BIT(9) | GRF_CLR_BIT(10) | \
+					 GRF_BIT(11))
+#define RK3368_GMAC_FLOW_CTRL		GRF_BIT(8)
+#define RK3368_GMAC_FLOW_CTRL_CLR	GRF_CLR_BIT(8)
+#define RK3368_GMAC_SPEED_10M		GRF_CLR_BIT(7)
+#define RK3368_GMAC_SPEED_100M		GRF_BIT(7)
+#define RK3368_GMAC_RMII_CLK_25M	GRF_BIT(3)
+#define RK3368_GMAC_RMII_CLK_2_5M	GRF_CLR_BIT(3)
+#define RK3368_GMAC_CLK_125M		(GRF_CLR_BIT(4) | GRF_CLR_BIT(5))
+#define RK3368_GMAC_CLK_25M		(GRF_BIT(4) | GRF_BIT(5))
+#define RK3368_GMAC_CLK_2_5M		(GRF_CLR_BIT(4) | GRF_BIT(5))
+#define RK3368_GMAC_RMII_MODE		GRF_BIT(6)
+#define RK3368_GMAC_RMII_MODE_CLR	GRF_CLR_BIT(6)
+
+/* RK3368_GRF_SOC_CON16 */
+#define RK3368_GMAC_TXCLK_DLY_ENABLE	GRF_BIT(7)
+#define RK3368_GMAC_TXCLK_DLY_DISABLE	GRF_CLR_BIT(7)
+#define RK3368_GMAC_RXCLK_DLY_ENABLE	GRF_BIT(15)
+#define RK3368_GMAC_RXCLK_DLY_DISABLE	GRF_CLR_BIT(15)
+#define RK3368_GMAC_CLK_RX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 8)
+#define RK3368_GMAC_CLK_TX_DL_CFG(val)	HIWORD_UPDATE(val, 0x7F, 0)
+
+static void rk3368_set_to_rgmii(struct rk_priv_data *bsp_priv,
+				int tx_delay, int rx_delay)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+		     RK3368_GMAC_PHY_INTF_SEL_RGMII |
+		     RK3368_GMAC_RMII_MODE_CLR);
+	regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON16,
+		     RK3368_GMAC_RXCLK_DLY_ENABLE |
+		     RK3368_GMAC_TXCLK_DLY_ENABLE |
+		     RK3368_GMAC_CLK_RX_DL_CFG(rx_delay) |
+		     RK3368_GMAC_CLK_TX_DL_CFG(tx_delay));
+}
+
+static void rk3368_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+		     RK3368_GMAC_PHY_INTF_SEL_RMII | RK3368_GMAC_RMII_MODE);
+}
+
+static void rk3368_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	if (speed == 10)
+		regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+			     RK3368_GMAC_CLK_2_5M);
+	else if (speed == 100)
+		regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+			     RK3368_GMAC_CLK_25M);
+	else if (speed == 1000)
+		regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+			     RK3368_GMAC_CLK_125M);
+	else
+		dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
+}
+
+static void rk3368_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	if (speed == 10) {
+		regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+			     RK3368_GMAC_RMII_CLK_2_5M |
+			     RK3368_GMAC_SPEED_10M);
+	} else if (speed == 100) {
+		regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+			     RK3368_GMAC_RMII_CLK_25M |
+			     RK3368_GMAC_SPEED_100M);
 	} else {
 		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
 	}
 }
 
+static const struct rk_gmac_ops rk3368_ops = {
+	.set_to_rgmii = rk3368_set_to_rgmii,
+	.set_to_rmii = rk3368_set_to_rmii,
+	.set_rgmii_speed = rk3368_set_rgmii_speed,
+	.set_rmii_speed = rk3368_set_rmii_speed,
+};
+
 static int gmac_clk_init(struct rk_priv_data *bsp_priv)
 {
 	struct device *dev = &bsp_priv->pdev->dev;
@@ -165,46 +304,46 @@ static int gmac_clk_init(struct rk_priv_
 
 	bsp_priv->mac_clk_rx = devm_clk_get(dev, "mac_clk_rx");
 	if (IS_ERR(bsp_priv->mac_clk_rx))
-		dev_err(dev, "%s: cannot get clock %s\n",
-			__func__, "mac_clk_rx");
+		dev_err(dev, "cannot get clock %s\n",
+			"mac_clk_rx");
 
 	bsp_priv->mac_clk_tx = devm_clk_get(dev, "mac_clk_tx");
 	if (IS_ERR(bsp_priv->mac_clk_tx))
-		dev_err(dev, "%s: cannot get clock %s\n",
-			__func__, "mac_clk_tx");
+		dev_err(dev, "cannot get clock %s\n",
+			"mac_clk_tx");
 
 	bsp_priv->aclk_mac = devm_clk_get(dev, "aclk_mac");
 	if (IS_ERR(bsp_priv->aclk_mac))
-		dev_err(dev, "%s: cannot get clock %s\n",
-			__func__, "aclk_mac");
+		dev_err(dev, "cannot get clock %s\n",
+			"aclk_mac");
 
 	bsp_priv->pclk_mac = devm_clk_get(dev, "pclk_mac");
 	if (IS_ERR(bsp_priv->pclk_mac))
-		dev_err(dev, "%s: cannot get clock %s\n",
-			__func__, "pclk_mac");
+		dev_err(dev, "cannot get clock %s\n",
+			"pclk_mac");
 
 	bsp_priv->clk_mac = devm_clk_get(dev, "stmmaceth");
 	if (IS_ERR(bsp_priv->clk_mac))
-		dev_err(dev, "%s: cannot get clock %s\n",
-			__func__, "stmmaceth");
+		dev_err(dev, "cannot get clock %s\n",
+			"stmmaceth");
 
 	if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
 		bsp_priv->clk_mac_ref = devm_clk_get(dev, "clk_mac_ref");
 		if (IS_ERR(bsp_priv->clk_mac_ref))
-			dev_err(dev, "%s: cannot get clock %s\n",
-				__func__, "clk_mac_ref");
+			dev_err(dev, "cannot get clock %s\n",
+				"clk_mac_ref");
 
 		if (!bsp_priv->clock_input) {
 			bsp_priv->clk_mac_refout =
 				devm_clk_get(dev, "clk_mac_refout");
 			if (IS_ERR(bsp_priv->clk_mac_refout))
-				dev_err(dev, "%s: cannot get clock %s\n",
-					__func__, "clk_mac_refout");
+				dev_err(dev, "cannot get clock %s\n",
+					"clk_mac_refout");
 		}
 	}
 
 	if (bsp_priv->clock_input) {
-		dev_info(dev, "%s: clock input from PHY\n", __func__);
+		dev_info(dev, "clock input from PHY\n");
 	} else {
 		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
 			clk_set_rate(bsp_priv->clk_mac, 50000000);
@@ -291,26 +430,25 @@ static int phy_power_on(struct rk_priv_d
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (!ldo) {
-		dev_err(dev, "%s: no regulator found\n", __func__);
+		dev_err(dev, "no regulator found\n");
 		return -1;
 	}
 
 	if (enable) {
 		ret = regulator_enable(ldo);
 		if (ret)
-			dev_err(dev, "%s: fail to enable phy-supply\n",
-				__func__);
+			dev_err(dev, "fail to enable phy-supply\n");
 	} else {
 		ret = regulator_disable(ldo);
 		if (ret)
-			dev_err(dev, "%s: fail to disable phy-supply\n",
-				__func__);
+			dev_err(dev, "fail to disable phy-supply\n");
 	}
 
 	return 0;
 }
 
-static void *rk_gmac_setup(struct platform_device *pdev)
+static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
+					  const struct rk_gmac_ops *ops)
 {
 	struct rk_priv_data *bsp_priv;
 	struct device *dev = &pdev->dev;
@@ -323,6 +461,7 @@ static void *rk_gmac_setup(struct platfo
 		return ERR_PTR(-ENOMEM);
 
 	bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
+	bsp_priv->ops = ops;
 
 	bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
 	if (IS_ERR(bsp_priv->regulator)) {
@@ -336,12 +475,11 @@ static void *rk_gmac_setup(struct platfo
 
 	ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);
 	if (ret) {
-		dev_err(dev, "%s: Can not read property: clock_in_out.\n",
-			__func__);
+		dev_err(dev, "Can not read property: clock_in_out.\n");
 		bsp_priv->clock_input = true;
 	} else {
-		dev_info(dev, "%s: clock input or output? (%s).\n",
-			 __func__, strings);
+		dev_info(dev, "clock input or output? (%s).\n",
+			 strings);
 		if (!strcmp(strings, "input"))
 			bsp_priv->clock_input = true;
 		else
@@ -351,22 +489,22 @@ static void *rk_gmac_setup(struct platfo
 	ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
 	if (ret) {
 		bsp_priv->tx_delay = 0x30;
-		dev_err(dev, "%s: Can not read property: tx_delay.", __func__);
-		dev_err(dev, "%s: set tx_delay to 0x%x\n",
-			__func__, bsp_priv->tx_delay);
+		dev_err(dev, "Can not read property: tx_delay.");
+		dev_err(dev, "set tx_delay to 0x%x\n",
+			bsp_priv->tx_delay);
 	} else {
-		dev_info(dev, "%s: TX delay(0x%x).\n", __func__, value);
+		dev_info(dev, "TX delay(0x%x).\n", value);
 		bsp_priv->tx_delay = value;
 	}
 
 	ret = of_property_read_u32(dev->of_node, "rx_delay", &value);
 	if (ret) {
 		bsp_priv->rx_delay = 0x10;
-		dev_err(dev, "%s: Can not read property: rx_delay.", __func__);
-		dev_err(dev, "%s: set rx_delay to 0x%x\n",
-			__func__, bsp_priv->rx_delay);
+		dev_err(dev, "Can not read property: rx_delay.");
+		dev_err(dev, "set rx_delay to 0x%x\n",
+			bsp_priv->rx_delay);
 	} else {
-		dev_info(dev, "%s: RX delay(0x%x).\n", __func__, value);
+		dev_info(dev, "RX delay(0x%x).\n", value);
 		bsp_priv->rx_delay = value;
 	}
 
@@ -376,13 +514,14 @@ static void *rk_gmac_setup(struct platfo
 
 	/*rmii or rgmii*/
 	if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
-		dev_info(dev, "%s: init for RGMII\n", __func__);
-		set_to_rgmii(bsp_priv, bsp_priv->tx_delay, bsp_priv->rx_delay);
+		dev_info(dev, "init for RGMII\n");
+		bsp_priv->ops->set_to_rgmii(bsp_priv, bsp_priv->tx_delay,
+					    bsp_priv->rx_delay);
 	} else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
-		dev_info(dev, "%s: init for RMII\n", __func__);
-		set_to_rmii(bsp_priv);
+		dev_info(dev, "init for RMII\n");
+		bsp_priv->ops->set_to_rmii(bsp_priv);
 	} else {
-		dev_err(dev, "%s: NO interface defined!\n", __func__);
+		dev_err(dev, "NO interface defined!\n");
 	}
 
 	gmac_clk_init(bsp_priv);
@@ -420,17 +559,68 @@ static void rk_fix_speed(void *priv, uns
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII)
-		set_rgmii_speed(bsp_priv, speed);
+		bsp_priv->ops->set_rgmii_speed(bsp_priv, speed);
 	else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
-		set_rmii_speed(bsp_priv, speed);
+		bsp_priv->ops->set_rmii_speed(bsp_priv, speed);
 	else
 		dev_err(dev, "unsupported interface %d", bsp_priv->phy_iface);
 }
 
-const struct stmmac_of_data rk3288_gmac_data = {
-	.has_gmac = 1,
-	.fix_mac_speed = rk_fix_speed,
-	.setup = rk_gmac_setup,
-	.init = rk_gmac_init,
-	.exit = rk_gmac_exit,
+static int rk_gmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	const struct rk_gmac_ops *data;
+	int ret;
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data) {
+		dev_err(&pdev->dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	plat_dat->has_gmac = true;
+	plat_dat->init = rk_gmac_init;
+	plat_dat->exit = rk_gmac_exit;
+	plat_dat->fix_mac_speed = rk_fix_speed;
+
+	plat_dat->bsp_priv = rk_gmac_setup(pdev, data);
+	if (IS_ERR(plat_dat->bsp_priv))
+		return PTR_ERR(plat_dat->bsp_priv);
+
+	ret = rk_gmac_init(pdev, plat_dat->bsp_priv);
+	if (ret)
+		return ret;
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id rk_gmac_dwmac_match[] = {
+	{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
+	{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
+	{ }
 };
+MODULE_DEVICE_TABLE(of, rk_gmac_dwmac_match);
+
+static struct platform_driver rk_gmac_dwmac_driver = {
+	.probe  = rk_gmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "rk_gmac-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = rk_gmac_dwmac_match,
+	},
+};
+module_platform_driver(rk_gmac_dwmac_driver);
+
+MODULE_AUTHOR("Chen-Zhi (Roger Chen) <roger.chen@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip RK3288 DWMAC specific glue layer");
+MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -175,31 +175,6 @@ static int socfpga_dwmac_setup(struct so
 	return 0;
 }
 
-static void *socfpga_dwmac_probe(struct platform_device *pdev)
-{
-	struct device		*dev = &pdev->dev;
-	int			ret;
-	struct socfpga_dwmac	*dwmac;
-
-	dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
-	if (!dwmac)
-		return ERR_PTR(-ENOMEM);
-
-	ret = socfpga_dwmac_parse_data(dwmac, dev);
-	if (ret) {
-		dev_err(dev, "Unable to parse OF data\n");
-		return ERR_PTR(ret);
-	}
-
-	ret = socfpga_dwmac_setup(dwmac);
-	if (ret) {
-		dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
-		return ERR_PTR(ret);
-	}
-
-	return dwmac;
-}
-
 static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
 {
 	struct socfpga_dwmac	*dwmac = priv;
@@ -257,9 +232,65 @@ static int socfpga_dwmac_init(struct pla
 	return ret;
 }
 
-const struct stmmac_of_data socfpga_gmac_data = {
-	.setup = socfpga_dwmac_probe,
-	.init = socfpga_dwmac_init,
-	.exit = socfpga_dwmac_exit,
-	.fix_mac_speed = socfpga_dwmac_fix_mac_speed,
+static int socfpga_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device		*dev = &pdev->dev;
+	int			ret;
+	struct socfpga_dwmac	*dwmac;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return -ENOMEM;
+
+	ret = socfpga_dwmac_parse_data(dwmac, dev);
+	if (ret) {
+		dev_err(dev, "Unable to parse OF data\n");
+		return ret;
+	}
+
+	ret = socfpga_dwmac_setup(dwmac);
+	if (ret) {
+		dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
+		return ret;
+	}
+
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->init = socfpga_dwmac_init;
+	plat_dat->exit = socfpga_dwmac_exit;
+	plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
+
+	ret = socfpga_dwmac_init(pdev, plat_dat->bsp_priv);
+	if (ret)
+		return ret;
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id socfpga_dwmac_match[] = {
+	{ .compatible = "altr,socfpga-stmmac" },
+	{ }
 };
+MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
+
+static struct platform_driver socfpga_dwmac_driver = {
+	.probe  = socfpga_dwmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "socfpga-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = socfpga_dwmac_match,
+	},
+};
+module_platform_driver(socfpga_dwmac_driver);
+
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -17,9 +17,11 @@
 #include <linux/stmmac.h>
 #include <linux/phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_net.h>
 
 #include "stmmac_platform.h"
@@ -127,6 +129,11 @@ struct sti_dwmac {
 	struct device *dev;
 	struct regmap *regmap;
 	u32 speed;
+	void (*fix_retime_src)(void *priv, unsigned int speed);
+};
+
+struct sti_dwmac_of_data {
+	void (*fix_retime_src)(void *priv, unsigned int speed);
 };
 
 static u32 phy_intf_sels[] = {
@@ -221,8 +228,9 @@ static void stid127_fix_retime_src(void
 	regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
 }
 
-static void sti_dwmac_ctrl_init(struct sti_dwmac *dwmac)
+static int sti_dwmac_init(struct platform_device *pdev, void *priv)
 {
+	struct sti_dwmac *dwmac = priv;
 	struct regmap *regmap = dwmac->regmap;
 	int iface = dwmac->interface;
 	struct device *dev = dwmac->dev;
@@ -240,28 +248,8 @@ static void sti_dwmac_ctrl_init(struct s
 
 	val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII;
 	regmap_update_bits(regmap, reg, ENMII_MASK, val);
-}
-
-static int stix4xx_init(struct platform_device *pdev, void *priv)
-{
-	struct sti_dwmac *dwmac = priv;
-	u32 spd = dwmac->speed;
 
-	sti_dwmac_ctrl_init(dwmac);
-
-	stih4xx_fix_retime_src(priv, spd);
-
-	return 0;
-}
-
-static int stid127_init(struct platform_device *pdev, void *priv)
-{
-	struct sti_dwmac *dwmac = priv;
-	u32 spd = dwmac->speed;
-
-	sti_dwmac_ctrl_init(dwmac);
-
-	stid127_fix_retime_src(priv, spd);
+	dwmac->fix_retime_src(priv, dwmac->speed);
 
 	return 0;
 }
@@ -333,34 +321,80 @@ static int sti_dwmac_parse_data(struct s
 	return 0;
 }
 
-static void *sti_dwmac_setup(struct platform_device *pdev)
+static int sti_dwmac_probe(struct platform_device *pdev)
 {
+	struct plat_stmmacenet_data *plat_dat;
+	const struct sti_dwmac_of_data *data;
+	struct stmmac_resources stmmac_res;
 	struct sti_dwmac *dwmac;
 	int ret;
 
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data) {
+		dev_err(&pdev->dev, "No OF match data provided\n");
+		return -EINVAL;
+	}
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
 	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
 	if (!dwmac)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
 	ret = sti_dwmac_parse_data(dwmac, pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to parse OF data\n");
-		return ERR_PTR(ret);
+		return ret;
 	}
 
-	return dwmac;
+	dwmac->fix_retime_src = data->fix_retime_src;
+
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->init = sti_dwmac_init;
+	plat_dat->exit = sti_dwmac_exit;
+	plat_dat->fix_mac_speed = data->fix_retime_src;
+
+	ret = sti_dwmac_init(pdev, plat_dat->bsp_priv);
+	if (ret)
+		return ret;
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 }
 
-const struct stmmac_of_data stih4xx_dwmac_data = {
-	.fix_mac_speed = stih4xx_fix_retime_src,
-	.setup = sti_dwmac_setup,
-	.init = stix4xx_init,
-	.exit = sti_dwmac_exit,
+static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
+	.fix_retime_src = stih4xx_fix_retime_src,
+};
+
+static const struct sti_dwmac_of_data stid127_dwmac_data = {
+	.fix_retime_src = stid127_fix_retime_src,
 };
 
-const struct stmmac_of_data stid127_dwmac_data = {
-	.fix_mac_speed = stid127_fix_retime_src,
-	.setup = sti_dwmac_setup,
-	.init = stid127_init,
-	.exit = sti_dwmac_exit,
+static const struct of_device_id sti_dwmac_match[] = {
+	{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
+	{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
+	{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
+	{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
+	{ }
 };
+MODULE_DEVICE_TABLE(of, sti_dwmac_match);
+
+static struct platform_driver sti_dwmac_driver = {
+	.probe  = sti_dwmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "sti-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = sti_dwmac_match,
+	},
+};
+module_platform_driver(sti_dwmac_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics DWMAC Specific Glue layer");
+MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -18,7 +18,9 @@
 
 #include <linux/stmmac.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 #include <linux/phy.h>
+#include <linux/platform_device.h>
 #include <linux/of_net.h>
 #include <linux/regulator/consumer.h>
 
@@ -31,35 +33,6 @@ struct sunxi_priv_data {
 	struct regulator *regulator;
 };
 
-static void *sun7i_gmac_setup(struct platform_device *pdev)
-{
-	struct sunxi_priv_data *gmac;
-	struct device *dev = &pdev->dev;
-
-	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
-	if (!gmac)
-		return ERR_PTR(-ENOMEM);
-
-	gmac->interface = of_get_phy_mode(dev->of_node);
-
-	gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
-	if (IS_ERR(gmac->tx_clk)) {
-		dev_err(dev, "could not get tx clock\n");
-		return gmac->tx_clk;
-	}
-
-	/* Optional regulator for PHY */
-	gmac->regulator = devm_regulator_get_optional(dev, "phy");
-	if (IS_ERR(gmac->regulator)) {
-		if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
-			return ERR_PTR(-EPROBE_DEFER);
-		dev_info(dev, "no regulator found\n");
-		gmac->regulator = NULL;
-	}
-
-	return gmac;
-}
-
 #define SUN7I_GMAC_GMII_RGMII_RATE	125000000
 #define SUN7I_GMAC_MII_RATE		25000000
 
@@ -130,13 +103,76 @@ static void sun7i_fix_speed(void *priv,
 	}
 }
 
-/* of_data specifying hardware features and callbacks.
- * hardware features were copied from Allwinner drivers. */
-const struct stmmac_of_data sun7i_gmac_data = {
-	.has_gmac = 1,
-	.tx_coe = 1,
-	.fix_mac_speed = sun7i_fix_speed,
-	.setup = sun7i_gmac_setup,
-	.init = sun7i_gmac_init,
-	.exit = sun7i_gmac_exit,
+static int sun7i_gmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct sunxi_priv_data *gmac;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac)
+		return -ENOMEM;
+
+	gmac->interface = of_get_phy_mode(dev->of_node);
+
+	gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
+	if (IS_ERR(gmac->tx_clk)) {
+		dev_err(dev, "could not get tx clock\n");
+		return PTR_ERR(gmac->tx_clk);
+	}
+
+	/* Optional regulator for PHY */
+	gmac->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(gmac->regulator)) {
+		if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "no regulator found\n");
+		gmac->regulator = NULL;
+	}
+
+	/* platform data specifying hardware features and callbacks.
+	 * hardware features were copied from Allwinner drivers. */
+	plat_dat->tx_coe = 1;
+	plat_dat->has_gmac = true;
+	plat_dat->bsp_priv = gmac;
+	plat_dat->init = sun7i_gmac_init;
+	plat_dat->exit = sun7i_gmac_exit;
+	plat_dat->fix_mac_speed = sun7i_fix_speed;
+
+	ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
+	if (ret)
+		return ret;
+
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id sun7i_dwmac_match[] = {
+	{ .compatible = "allwinner,sun7i-a20-gmac" },
+	{ }
 };
+MODULE_DEVICE_TABLE(of, sun7i_dwmac_match);
+
+static struct platform_driver sun7i_dwmac_driver = {
+	.probe  = sun7i_gmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "sun7i-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = sun7i_dwmac_match,
+	},
+};
+module_platform_driver(sun7i_dwmac_driver);
+
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_DESCRIPTION("Allwinner sunxi DWMAC specific glue layer");
+MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
@@ -73,7 +73,7 @@
 #define MMC_RX_OCTETCOUNT_G		0x00000188
 #define MMC_RX_BROADCASTFRAME_G		0x0000018c
 #define MMC_RX_MULTICASTFRAME_G		0x00000190
-#define MMC_RX_CRC_ERRROR		0x00000194
+#define MMC_RX_CRC_ERROR		0x00000194
 #define MMC_RX_ALIGN_ERROR		0x00000198
 #define MMC_RX_RUN_ERROR		0x0000019C
 #define MMC_RX_JABBER_ERROR		0x000001A0
@@ -196,7 +196,7 @@ void dwmac_mmc_read(void __iomem *ioaddr
 	mmc->mmc_rx_octetcount_g += readl(ioaddr + MMC_RX_OCTETCOUNT_G);
 	mmc->mmc_rx_broadcastframe_g += readl(ioaddr + MMC_RX_BROADCASTFRAME_G);
 	mmc->mmc_rx_multicastframe_g += readl(ioaddr + MMC_RX_MULTICASTFRAME_G);
-	mmc->mmc_rx_crc_error += readl(ioaddr + MMC_RX_CRC_ERRROR);
+	mmc->mmc_rx_crc_error += readl(ioaddr + MMC_RX_CRC_ERROR);
 	mmc->mmc_rx_align_error += readl(ioaddr + MMC_RX_ALIGN_ERROR);
 	mmc->mmc_rx_run_error += readl(ioaddr + MMC_RX_RUN_ERROR);
 	mmc->mmc_rx_jabber_error += readl(ioaddr + MMC_RX_JABBER_ERROR);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -34,6 +34,14 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/reset.h>
 
+struct stmmac_resources {
+	void __iomem *addr;
+	const char *mac;
+	int wol_irq;
+	int lpi_irq;
+	int irq;
+};
+
 struct stmmac_tx_info {
 	dma_addr_t buf;
 	bool map_as_page;
@@ -135,9 +143,9 @@ void stmmac_ptp_unregister(struct stmmac
 int stmmac_resume(struct net_device *ndev);
 int stmmac_suspend(struct net_device *ndev);
 int stmmac_dvr_remove(struct net_device *ndev);
-struct stmmac_priv *stmmac_dvr_probe(struct device *device,
-				     struct plat_stmmacenet_data *plat_dat,
-				     void __iomem *addr);
+int stmmac_dvr_probe(struct device *device,
+		     struct plat_stmmacenet_data *plat_dat,
+		     struct stmmac_resources *res);
 void stmmac_disable_eee_mode(struct stmmac_priv *priv);
 bool stmmac_eee_init(struct stmmac_priv *priv);
 
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -52,6 +52,7 @@
 #include "stmmac_ptp.h"
 #include "stmmac.h"
 #include <linux/reset.h>
+#include <linux/of_mdio.h>
 
 #define STMMAC_ALIGN(x)	L1_CACHE_ALIGN(x)
 
@@ -816,18 +817,25 @@ static int stmmac_init_phy(struct net_de
 	priv->speed = 0;
 	priv->oldduplex = -1;
 
-	if (priv->plat->phy_bus_name)
-		snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
-			 priv->plat->phy_bus_name, priv->plat->bus_id);
-	else
-		snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
-			 priv->plat->bus_id);
+	if (priv->plat->phy_node) {
+		phydev = of_phy_connect(dev, priv->plat->phy_node,
+					&stmmac_adjust_link, 0, interface);
+	} else {
+		if (priv->plat->phy_bus_name)
+			snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+				 priv->plat->phy_bus_name, priv->plat->bus_id);
+		else
+			snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+				 priv->plat->bus_id);
 
-	snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
-		 priv->plat->phy_addr);
-	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id_fmt);
+		snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+			 priv->plat->phy_addr);
+		pr_debug("stmmac_init_phy:  trying to attach to %s\n",
+			 phy_id_fmt);
 
-	phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
+		phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
+				     interface);
+	}
 
 	if (IS_ERR_OR_NULL(phydev)) {
 		pr_err("%s: Could not attach to PHY\n", dev->name);
@@ -851,7 +859,7 @@ static int stmmac_init_phy(struct net_de
 	 * device as well.
 	 * Note: phydev->phy_id is the result of reading the UID PHY registers.
 	 */
-	if (phydev->phy_id == 0) {
+	if (!priv->plat->phy_node && phydev->phy_id == 0) {
 		phy_disconnect(phydev);
 		return -ENODEV;
 	}
@@ -978,13 +986,11 @@ static int stmmac_init_rx_buffers(struct
 {
 	struct sk_buff *skb;
 
-	skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN,
-				 flags);
+	skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
 	if (!skb) {
 		pr_err("%s: Rx init fails; skb is NULL\n", __func__);
 		return -ENOMEM;
 	}
-	skb_reserve(skb, NET_IP_ALIGN);
 	priv->rx_skbuff[i] = skb;
 	priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
 						priv->dma_buf_sz,
@@ -2803,16 +2809,15 @@ static int stmmac_hw_init(struct stmmac_
  * stmmac_dvr_probe
  * @device: device pointer
  * @plat_dat: platform data pointer
- * @addr: iobase memory address
+ * @res: stmmac resource pointer
  * Description: this is the main probe function used to
  * call the alloc_etherdev, allocate the priv structure.
  * Return:
- * on success the new private structure is returned, otherwise the error
- * pointer.
+ * returns 0 on success, otherwise errno.
  */
-struct stmmac_priv *stmmac_dvr_probe(struct device *device,
-				     struct plat_stmmacenet_data *plat_dat,
-				     void __iomem *addr)
+int stmmac_dvr_probe(struct device *device,
+		     struct plat_stmmacenet_data *plat_dat,
+		     struct stmmac_resources *res)
 {
 	int ret = 0;
 	struct net_device *ndev = NULL;
@@ -2820,7 +2825,7 @@ struct stmmac_priv *stmmac_dvr_probe(str
 
 	ndev = alloc_etherdev(sizeof(struct stmmac_priv));
 	if (!ndev)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
 	SET_NETDEV_DEV(ndev, device);
 
@@ -2831,8 +2836,17 @@ struct stmmac_priv *stmmac_dvr_probe(str
 	stmmac_set_ethtool_ops(ndev);
 	priv->pause = pause;
 	priv->plat = plat_dat;
-	priv->ioaddr = addr;
-	priv->dev->base_addr = (unsigned long)addr;
+	priv->ioaddr = res->addr;
+	priv->dev->base_addr = (unsigned long)res->addr;
+
+	priv->dev->irq = res->irq;
+	priv->wol_irq = res->wol_irq;
+	priv->lpi_irq = res->lpi_irq;
+
+	if (res->mac)
+		memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN);
+
+	dev_set_drvdata(device, priv->dev);
 
 	/* Verify driver arguments */
 	stmmac_verify_args();
@@ -2947,7 +2961,7 @@ struct stmmac_priv *stmmac_dvr_probe(str
 		}
 	}
 
-	return priv;
+	return 0;
 
 error_mdio_register:
 	unregister_netdev(ndev);
@@ -2960,7 +2974,7 @@ error_pclk_get:
 error_clk_get:
 	free_netdev(ndev);
 
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(stmmac_dvr_probe);
 
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -161,11 +161,16 @@ int stmmac_mdio_reset(struct mii_bus *bu
 
 		if (!gpio_request(reset_gpio, "mdio-reset")) {
 			gpio_direction_output(reset_gpio, active_low ? 1 : 0);
-			udelay(data->delays[0]);
+			if (data->delays[0])
+				msleep(DIV_ROUND_UP(data->delays[0], 1000));
+
 			gpio_set_value(reset_gpio, active_low ? 0 : 1);
-			udelay(data->delays[1]);
+			if (data->delays[1])
+				msleep(DIV_ROUND_UP(data->delays[1], 1000));
+
 			gpio_set_value(reset_gpio, active_low ? 1 : 0);
-			udelay(data->delays[2]);
+			if (data->delays[2])
+				msleep(DIV_ROUND_UP(data->delays[2], 1000));
 		}
 	}
 #endif
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -163,7 +163,7 @@ static int stmmac_pci_probe(struct pci_d
 {
 	struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
 	struct plat_stmmacenet_data *plat;
-	struct stmmac_priv *priv;
+	struct stmmac_resources res;
 	int i;
 	int ret;
 
@@ -214,19 +214,12 @@ static int stmmac_pci_probe(struct pci_d
 
 	pci_enable_msi(pdev);
 
-	priv = stmmac_dvr_probe(&pdev->dev, plat, pcim_iomap_table(pdev)[i]);
-	if (IS_ERR(priv)) {
-		dev_err(&pdev->dev, "%s: main driver probe failed\n", __func__);
-		return PTR_ERR(priv);
-	}
-	priv->dev->irq = pdev->irq;
-	priv->wol_irq = pdev->irq;
-
-	pci_set_drvdata(pdev, priv->dev);
-
-	dev_dbg(&pdev->dev, "STMMAC PCI driver registration completed\n");
+	memset(&res, 0, sizeof(res));
+	res.addr = pcim_iomap_table(pdev)[i];
+	res.wol_irq = pdev->irq;
+	res.irq = pdev->irq;
 
-	return 0;
+	return stmmac_dvr_probe(&pdev->dev, plat, &res);
 }
 
 /**
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -28,29 +28,11 @@
 #include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/of_device.h>
+#include <linux/of_mdio.h>
 
 #include "stmmac.h"
 #include "stmmac_platform.h"
 
-static const struct of_device_id stmmac_dt_ids[] = {
-	/* SoC specific glue layers should come before generic bindings */
-	{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_gmac_data},
-	{ .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
-	{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
-	{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
-	{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
-	{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
-	{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
-	{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
-	{ .compatible = "st,spear600-gmac"},
-	{ .compatible = "snps,dwmac-3.610"},
-	{ .compatible = "snps,dwmac-3.70a"},
-	{ .compatible = "snps,dwmac-3.710"},
-	{ .compatible = "snps,dwmac"},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-
 #ifdef CONFIG_OF
 
 /**
@@ -122,37 +104,16 @@ static int dwmac1000_validate_ucast_entr
  * this function is to read the driver parameters from device-tree and
  * set some private fields that will be used by the main at runtime.
  */
-static int stmmac_probe_config_dt(struct platform_device *pdev,
-				  struct plat_stmmacenet_data *plat,
-				  const char **mac)
+struct plat_stmmacenet_data *
+stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 {
 	struct device_node *np = pdev->dev.of_node;
+	struct plat_stmmacenet_data *plat;
 	struct stmmac_dma_cfg *dma_cfg;
-	const struct of_device_id *device;
-
-	if (!np)
-		return -ENODEV;
 
-	device = of_match_device(stmmac_dt_ids, &pdev->dev);
-	if (!device)
-		return -ENODEV;
-
-	if (device->data) {
-		const struct stmmac_of_data *data = device->data;
-		plat->has_gmac = data->has_gmac;
-		plat->enh_desc = data->enh_desc;
-		plat->tx_coe = data->tx_coe;
-		plat->rx_coe = data->rx_coe;
-		plat->bugged_jumbo = data->bugged_jumbo;
-		plat->pmt = data->pmt;
-		plat->riwt_off = data->riwt_off;
-		plat->fix_mac_speed = data->fix_mac_speed;
-		plat->bus_setup = data->bus_setup;
-		plat->setup = data->setup;
-		plat->free = data->free;
-		plat->init = data->init;
-		plat->exit = data->exit;
-	}
+	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return ERR_PTR(-ENOMEM);
 
 	*mac = of_get_mac_address(np);
 	plat->interface = of_get_phy_mode(np);
@@ -168,13 +129,24 @@ static int stmmac_probe_config_dt(struct
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
 
+	/* If we find a phy-handle property, use it as the PHY */
+	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
+	/* If phy-handle is not specified, check if we have a fixed-phy */
+	if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+		if ((of_phy_register_fixed_link(np) < 0))
+			return ERR_PTR(-ENODEV);
+
+		plat->phy_node = of_node_get(np);
+	}
+
 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
 	 * and warn of its use. Remove this when phy node support is added.
 	 */
 	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
-	if (plat->phy_bus_name)
+	if (plat->phy_node || plat->phy_bus_name)
 		plat->mdio_bus_data = NULL;
 	else
 		plat->mdio_bus_data =
@@ -194,6 +166,12 @@ static int stmmac_probe_config_dt(struct
 	 */
 	plat->maxmtu = JUMBO_LEN;
 
+	/* Set default value for multicast hash bins */
+	plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+	/* Set default value for unicast filter entries */
+	plat->unicast_filter_entries = 1;
+
 	/*
 	 * Currently only the properties needed on SPEAr600
 	 * are provided. All other properties should be added
@@ -232,8 +210,10 @@ static int stmmac_probe_config_dt(struct
 	if (of_find_property(np, "snps,pbl", NULL)) {
 		dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
 				       GFP_KERNEL);
-		if (!dma_cfg)
-			return -ENOMEM;
+		if (!dma_cfg) {
+			of_node_put(np);
+			return ERR_PTR(-ENOMEM);
+		}
 		plat->dma_cfg = dma_cfg;
 		of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
 		dma_cfg->fixed_burst =
@@ -250,45 +230,34 @@ static int stmmac_probe_config_dt(struct
 		pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set.");
 	}
 
-	return 0;
+	return plat;
 }
 #else
-static int stmmac_probe_config_dt(struct platform_device *pdev,
-				  struct plat_stmmacenet_data *plat,
-				  const char **mac)
+struct plat_stmmacenet_data *
+stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 {
-	return -ENOSYS;
+	return ERR_PTR(-ENOSYS);
 }
 #endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(stmmac_probe_config_dt);
 
-/**
- * stmmac_pltfr_probe - platform driver probe.
- * @pdev: platform device pointer
- * Description: platform_device probe function. It is to allocate
- * the necessary platform resources, invoke custom helper (if required) and
- * invoke the main probe function.
- */
-static int stmmac_pltfr_probe(struct platform_device *pdev)
+int stmmac_get_platform_resources(struct platform_device *pdev,
+				  struct stmmac_resources *stmmac_res)
 {
-	int ret = 0;
 	struct resource *res;
-	struct device *dev = &pdev->dev;
-	void __iomem *addr = NULL;
-	struct stmmac_priv *priv = NULL;
-	struct plat_stmmacenet_data *plat_dat = NULL;
-	const char *mac = NULL;
-	int irq, wol_irq, lpi_irq;
+
+	memset(stmmac_res, 0, sizeof(*stmmac_res));
 
 	/* Get IRQ information early to have an ability to ask for deferred
 	 * probe if needed before we went too far with resource allocation.
 	 */
-	irq = platform_get_irq_byname(pdev, "macirq");
-	if (irq < 0) {
-		if (irq != -EPROBE_DEFER) {
-			dev_err(dev,
+	stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
+	if (stmmac_res->irq < 0) {
+		if (stmmac_res->irq != -EPROBE_DEFER) {
+			dev_err(&pdev->dev,
 				"MAC IRQ configuration information not found\n");
 		}
-		return irq;
+		return stmmac_res->irq;
 	}
 
 	/* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
@@ -298,82 +267,23 @@ static int stmmac_pltfr_probe(struct pla
 	 * In case the wake up interrupt is not passed from the platform
 	 * so the driver will continue to use the mac irq (ndev->irq)
 	 */
-	wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
-	if (wol_irq < 0) {
-		if (wol_irq == -EPROBE_DEFER)
+	stmmac_res->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
+	if (stmmac_res->wol_irq < 0) {
+		if (stmmac_res->wol_irq == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
-		wol_irq = irq;
+		stmmac_res->wol_irq = stmmac_res->irq;
 	}
 
-	lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
-	if (lpi_irq == -EPROBE_DEFER)
+	stmmac_res->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+	if (stmmac_res->lpi_irq == -EPROBE_DEFER)
 		return -EPROBE_DEFER;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	addr = devm_ioremap_resource(dev, res);
-	if (IS_ERR(addr))
-		return PTR_ERR(addr);
-
-	plat_dat = dev_get_platdata(&pdev->dev);
-
-	if (!plat_dat)
-		plat_dat = devm_kzalloc(&pdev->dev,
-					sizeof(struct plat_stmmacenet_data),
-					GFP_KERNEL);
-	if (!plat_dat) {
-		pr_err("%s: ERROR: no memory", __func__);
-		return  -ENOMEM;
-	}
-
-	/* Set default value for multicast hash bins */
-	plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
+	stmmac_res->addr = devm_ioremap_resource(&pdev->dev, res);
 
-	/* Set default value for unicast filter entries */
-	plat_dat->unicast_filter_entries = 1;
-
-	if (pdev->dev.of_node) {
-		ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
-		if (ret) {
-			pr_err("%s: main dt probe failed", __func__);
-			return ret;
-		}
-	}
-
-	/* Custom setup (if needed) */
-	if (plat_dat->setup) {
-		plat_dat->bsp_priv = plat_dat->setup(pdev);
-		if (IS_ERR(plat_dat->bsp_priv))
-			return PTR_ERR(plat_dat->bsp_priv);
-	}
-
-	/* Custom initialisation (if needed)*/
-	if (plat_dat->init) {
-		ret = plat_dat->init(pdev, plat_dat->bsp_priv);
-		if (unlikely(ret))
-			return ret;
-	}
-
-	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
-	if (IS_ERR(priv)) {
-		pr_err("%s: main driver probe failed", __func__);
-		return PTR_ERR(priv);
-	}
-
-	/* Copy IRQ values to priv structure which is now avaialble */
-	priv->dev->irq = irq;
-	priv->wol_irq = wol_irq;
-	priv->lpi_irq = lpi_irq;
-
-	/* Get MAC address if available (DT) */
-	if (mac)
-		memcpy(priv->dev->dev_addr, mac, ETH_ALEN);
-
-	platform_set_drvdata(pdev, priv->dev);
-
-	pr_debug("STMMAC platform driver registration completed");
-
-	return 0;
+	return PTR_ERR_OR_ZERO(stmmac_res->addr);
 }
+EXPORT_SYMBOL_GPL(stmmac_get_platform_resources);
 
 /**
  * stmmac_pltfr_remove
@@ -381,7 +291,7 @@ static int stmmac_pltfr_probe(struct pla
  * Description: this function calls the main to free the net resources
  * and calls the platforms hook and release the resources (e.g. mem).
  */
-static int stmmac_pltfr_remove(struct platform_device *pdev)
+int stmmac_pltfr_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct stmmac_priv *priv = netdev_priv(ndev);
@@ -390,11 +300,9 @@ static int stmmac_pltfr_remove(struct pl
 	if (priv->plat->exit)
 		priv->plat->exit(pdev, priv->plat->bsp_priv);
 
-	if (priv->plat->free)
-		priv->plat->free(pdev, priv->plat->bsp_priv);
-
 	return ret;
 }
+EXPORT_SYMBOL_GPL(stmmac_pltfr_remove);
 
 #ifdef CONFIG_PM_SLEEP
 /**
@@ -438,21 +346,10 @@ static int stmmac_pltfr_resume(struct de
 }
 #endif /* CONFIG_PM_SLEEP */
 
-static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops,
-			 stmmac_pltfr_suspend, stmmac_pltfr_resume);
-
-static struct platform_driver stmmac_pltfr_driver = {
-	.probe = stmmac_pltfr_probe,
-	.remove = stmmac_pltfr_remove,
-	.driver = {
-		   .name = STMMAC_RESOURCE_NAME,
-		   .pm = &stmmac_pltfr_pm_ops,
-		   .of_match_table = of_match_ptr(stmmac_dt_ids),
-	},
-};
-
-module_platform_driver(stmmac_pltfr_driver);
+SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, stmmac_pltfr_suspend,
+				       stmmac_pltfr_resume);
+EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
 
-MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
 MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
@@ -19,11 +19,15 @@
 #ifndef __STMMAC_PLATFORM_H__
 #define __STMMAC_PLATFORM_H__
 
-extern const struct stmmac_of_data meson6_dwmac_data;
-extern const struct stmmac_of_data sun7i_gmac_data;
-extern const struct stmmac_of_data stih4xx_dwmac_data;
-extern const struct stmmac_of_data stid127_dwmac_data;
-extern const struct stmmac_of_data socfpga_gmac_data;
-extern const struct stmmac_of_data rk3288_gmac_data;
+#include "stmmac.h"
+
+struct plat_stmmacenet_data *
+stmmac_probe_config_dt(struct platform_device *pdev, const char **mac);
+
+int stmmac_get_platform_resources(struct platform_device *pdev,
+				  struct stmmac_resources *stmmac_res);
+
+int stmmac_pltfr_remove(struct platform_device *pdev);
+extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
 
 #endif /* __STMMAC_PLATFORM_H__ */
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
 	int phy_addr;
 	int interface;
 	struct stmmac_mdio_bus_data *mdio_bus_data;
+	struct device_node *phy_node;
 	struct stmmac_dma_cfg *dma_cfg;
 	int clk_csr;
 	int has_gmac;
@@ -118,30 +119,8 @@ struct plat_stmmacenet_data {
 	int rx_fifo_size;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
-	void *(*setup)(struct platform_device *pdev);
-	void (*free)(struct platform_device *pdev, void *priv);
 	int (*init)(struct platform_device *pdev, void *priv);
 	void (*exit)(struct platform_device *pdev, void *priv);
-	void *custom_cfg;
-	void *custom_data;
 	void *bsp_priv;
 };
-
-/* of_data for SoC glue layer device tree bindings */
-
-struct stmmac_of_data {
-	int has_gmac;
-	int enh_desc;
-	int tx_coe;
-	int rx_coe;
-	int bugged_jumbo;
-	int pmt;
-	int riwt_off;
-	void (*fix_mac_speed)(void *priv, unsigned int speed);
-	void (*bus_setup)(void __iomem *ioaddr);
-	void *(*setup)(struct platform_device *pdev);
-	void (*free)(struct platform_device *pdev, void *priv);
-	int (*init)(struct platform_device *pdev, void *priv);
-	void (*exit)(struct platform_device *pdev, void *priv);
-};
 #endif