path: root/target/linux/brcm2708/patches-4.19/950-0718-drm-vc4-Add-support-for-margins-to-fkms.patch

From a4e8051901a5d858a69732a3f9734835afc00af5 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Fri, 19 Jul 2019 15:35:13 +0100
Subject: [PATCH 718/806] drm/vc4: Add support for margins to fkms

Allows for overscan to be configured under FKMS.
NB This is rescaling the planes, not reducing the size of the
display mode.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
 drivers/gpu/drm/vc4/vc4_firmware_kms.c | 241 +++++++++++++++++++------
 1 file changed, 190 insertions(+), 51 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c
@@ -256,6 +256,23 @@ static inline struct vc4_crtc *to_vc4_cr
 	return container_of(crtc, struct vc4_crtc, base);
 }
 
+struct vc4_crtc_state {
+	struct drm_crtc_state base;
+
+	struct {
+		unsigned int left;
+		unsigned int right;
+		unsigned int top;
+		unsigned int bottom;
+	} margins;
+};
+
+static inline struct vc4_crtc_state *
+to_vc4_crtc_state(struct drm_crtc_state *crtc_state)
+{
+	return (struct vc4_crtc_state *)crtc_state;
+}
+
 struct vc4_fkms_encoder {
 	struct drm_encoder base;
 	bool hdmi_monitor;
@@ -365,17 +382,127 @@ static int vc4_plane_set_blank(struct dr
 	return ret;
 }
 
+static void vc4_fkms_crtc_get_margins(struct drm_crtc_state *state,
+				      unsigned int *left, unsigned int *right,
+				      unsigned int *top, unsigned int *bottom)
+{
+	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+	struct drm_connector_state *conn_state;
+	struct drm_connector *conn;
+	int i;
+
+	*left = vc4_state->margins.left;
+	*right = vc4_state->margins.right;
+	*top = vc4_state->margins.top;
+	*bottom = vc4_state->margins.bottom;
+
+	/* We have to interate over all new connector states because
+	 * vc4_fkms_crtc_get_margins() might be called before
+	 * vc4_fkms_crtc_atomic_check() which means margins info in
+	 * vc4_crtc_state might be outdated.
+	 */
+	for_each_new_connector_in_state(state->state, conn, conn_state, i) {
+		if (conn_state->crtc != state->crtc)
+			continue;
+
+		*left = conn_state->tv.margins.left;
+		*right = conn_state->tv.margins.right;
+		*top = conn_state->tv.margins.top;
+		*bottom = conn_state->tv.margins.bottom;
+		break;
+	}
+}
+
+static int vc4_fkms_margins_adj(struct drm_plane_state *pstate,
+				struct set_plane *plane)
+{
+	unsigned int left, right, top, bottom;
+	int adjhdisplay, adjvdisplay;
+	struct drm_crtc_state *crtc_state;
+
+	crtc_state = drm_atomic_get_new_crtc_state(pstate->state,
+						   pstate->crtc);
+
+	vc4_fkms_crtc_get_margins(crtc_state, &left, &right, &top, &bottom);
+
+	if (!left && !right && !top && !bottom)
+		return 0;
+
+	if (left + right >= crtc_state->mode.hdisplay ||
+	    top + bottom >= crtc_state->mode.vdisplay)
+		return -EINVAL;
+
+	adjhdisplay = crtc_state->mode.hdisplay - (left + right);
+	plane->dst_x = DIV_ROUND_CLOSEST(plane->dst_x * adjhdisplay,
+					 (int)crtc_state->mode.hdisplay);
+	plane->dst_x += left;
+	if (plane->dst_x > (int)(crtc_state->mode.hdisplay - left))
+		plane->dst_x = crtc_state->mode.hdisplay - left;
+
+	adjvdisplay = crtc_state->mode.vdisplay - (top + bottom);
+	plane->dst_y = DIV_ROUND_CLOSEST(plane->dst_y * adjvdisplay,
+					 (int)crtc_state->mode.vdisplay);
+	plane->dst_y += top;
+	if (plane->dst_y > (int)(crtc_state->mode.vdisplay - top))
+		plane->dst_y = crtc_state->mode.vdisplay - top;
+
+	plane->dst_w = DIV_ROUND_CLOSEST(plane->dst_w * adjhdisplay,
+					 crtc_state->mode.hdisplay);
+	plane->dst_h = DIV_ROUND_CLOSEST(plane->dst_h * adjvdisplay,
+					 crtc_state->mode.vdisplay);
+
+	if (!plane->dst_w || !plane->dst_h)
+		return -EINVAL;
+
+	return 0;
+}
+
 static void vc4_plane_atomic_update(struct drm_plane *plane,
 				    struct drm_plane_state *old_state)
 {
 	struct drm_plane_state *state = plane->state;
+
+	/*
+	 * Do NOT set now, as we haven't checked if the crtc is active or not.
+	 * Set from vc4_plane_set_blank instead.
+	 *
+	 * If the CRTC is on (or going to be on) and we're enabled,
+	 * then unblank.  Otherwise, stay blank until CRTC enable.
+	 */
+	if (state->crtc->state->active)
+		vc4_plane_set_blank(plane, false);
+}
+
+static void vc4_plane_atomic_disable(struct drm_plane *plane,
+				     struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = plane->state;
+	struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane);
+
+	DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n",
+			 plane->base.id, plane->name,
+			 state->crtc_w,
+			 state->crtc_h,
+			 vc4_plane->mb.plane.vc_image_type,
+			 state->crtc_x,
+			 state->crtc_y);
+	vc4_plane_set_blank(plane, true);
+}
+
+static bool plane_enabled(struct drm_plane_state *state)
+{
+	return state->fb && state->crtc;
+}
+
+static int vc4_plane_to_mb(struct drm_plane *plane,
+			   struct mailbox_set_plane *mb,
+			   struct drm_plane_state *state)
+{
 	struct drm_framebuffer *fb = state->fb;
 	struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 	const struct drm_format_info *drm_fmt = fb->format;
 	const struct vc_image_format *vc_fmt =
 					vc4_get_vc_image_fmt(drm_fmt->format);
-	struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane);
-	struct mailbox_set_plane *mb = &vc4_plane->mb;
 	int num_planes = fb->format->num_planes;
 	struct drm_display_mode *mode = &state->crtc->mode;
 	unsigned int rotation = SUPPORTED_ROTATIONS;
@@ -417,25 +544,7 @@ static void vc4_plane_atomic_update(stru
 		break;
 	}
 
-	/* FIXME: If the dest rect goes off screen then clip the src rect so we
-	 * don't have off-screen pixels.
-	 */
-	if (plane->type == DRM_PLANE_TYPE_CURSOR) {
-		/* There is no scaling on the cursor plane, therefore the calcs
-		 * to alter the source crop as the cursor goes off the screen
-		 * are simple.
-		 */
-		if (mb->plane.dst_x + mb->plane.dst_w > mode->hdisplay) {
-			mb->plane.dst_w = mode->hdisplay - mb->plane.dst_x;
-			mb->plane.src_w = (mode->hdisplay - mb->plane.dst_x)
-									<< 16;
-		}
-		if (mb->plane.dst_y + mb->plane.dst_h > mode->vdisplay) {
-			mb->plane.dst_h = mode->vdisplay - mb->plane.dst_y;
-			mb->plane.src_h = (mode->vdisplay - mb->plane.dst_y)
-									<< 16;
-		}
-	}
+	vc4_fkms_margins_adj(state, &mb->plane);
 
 	if (num_planes > 1) {
 		/* Assume this must be YUV */
@@ -525,38 +634,19 @@ static void vc4_plane_atomic_update(stru
 			 state->alpha,
 			 state->normalized_zpos);
 
-	/*
-	 * Do NOT set now, as we haven't checked if the crtc is active or not.
-	 * Set from vc4_plane_set_blank instead.
-	 *
-	 * If the CRTC is on (or going to be on) and we're enabled,
-	 * then unblank.  Otherwise, stay blank until CRTC enable.
-	 */
-	if (state->crtc->state->active)
-		vc4_plane_set_blank(plane, false);
+	return 0;
 }
 
-static void vc4_plane_atomic_disable(struct drm_plane *plane,
-				     struct drm_plane_state *old_state)
+static int vc4_plane_atomic_check(struct drm_plane *plane,
+				  struct drm_plane_state *state)
 {
-	//struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
-	struct drm_plane_state *state = plane->state;
 	struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane);
 
-	DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n",
-			 plane->base.id, plane->name,
-			 state->crtc_w,
-			 state->crtc_h,
-			 vc4_plane->mb.plane.vc_image_type,
-			 state->crtc_x,
-			 state->crtc_y);
-	vc4_plane_set_blank(plane, true);
-}
+	if (!plane_enabled(state))
+		return 0;
+
+	return vc4_plane_to_mb(plane, &vc4_plane->mb, state);
 
-static int vc4_plane_atomic_check(struct drm_plane *plane,
-				  struct drm_plane_state *state)
-{
-	return 0;
 }
 
 static void vc4_plane_destroy(struct drm_plane *plane)
@@ -878,8 +968,23 @@ vc4_crtc_mode_valid(struct drm_crtc *crt
 static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
 				 struct drm_crtc_state *state)
 {
-	DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n",
-		      crtc->base.id);
+	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+	struct drm_connector *conn;
+	struct drm_connector_state *conn_state;
+	int i;
+
+	DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", crtc->base.id);
+
+	for_each_new_connector_in_state(state->state, conn, conn_state, i) {
+		if (conn_state->crtc != crtc)
+			continue;
+
+		vc4_state->margins.left = conn_state->tv.margins.left;
+		vc4_state->margins.right = conn_state->tv.margins.right;
+		vc4_state->margins.top = conn_state->tv.margins.top;
+		vc4_state->margins.bottom = conn_state->tv.margins.bottom;
+		break;
+	}
 	return 0;
 }
 
@@ -980,6 +1085,33 @@ static int vc4_page_flip(struct drm_crtc
 	return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx);
 }
 
+static struct drm_crtc_state *
+vc4_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+	struct vc4_crtc_state *vc4_state, *old_vc4_state;
+
+	vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
+	if (!vc4_state)
+		return NULL;
+
+	old_vc4_state = to_vc4_crtc_state(crtc->state);
+	vc4_state->margins = old_vc4_state->margins;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
+	return &vc4_state->base;
+}
+
+static void
+vc4_crtc_reset(struct drm_crtc *crtc)
+{
+	if (crtc->state)
+		__drm_atomic_helper_crtc_destroy_state(crtc->state);
+
+	crtc->state = kzalloc(sizeof(*crtc->state), GFP_KERNEL);
+	if (crtc->state)
+		crtc->state->crtc = crtc;
+}
+
 static int vc4_fkms_enable_vblank(struct drm_crtc *crtc)
 {
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
@@ -1007,8 +1139,8 @@ static const struct drm_crtc_funcs vc4_c
 	.set_property = NULL,
 	.cursor_set = NULL, /* handled by drm_mode_cursor_universal */
 	.cursor_move = NULL, /* handled by drm_mode_cursor_universal */
-	.reset = drm_atomic_helper_crtc_reset,
-	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.reset = vc4_crtc_reset,
+	.atomic_duplicate_state = vc4_crtc_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
 	.enable_vblank = vc4_fkms_enable_vblank,
 	.disable_vblank = vc4_fkms_disable_vblank,
@@ -1267,6 +1399,13 @@ vc4_fkms_connector_init(struct drm_devic
 		connector->interlace_allowed = 0;
 	}
 
+	/* Create and attach TV margin props to this connector. */
+	ret = drm_mode_create_tv_margin_properties(dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_connector_attach_tv_margin_properties(connector);
+
 	connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
 			     DRM_CONNECTOR_POLL_DISCONNECT);