aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0309-overlays-Add-ssd1306-overlay-for-OLED-display.patch
blob: ea604d98003d0ad32f8b80dcee23d5b770bd8da0 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
From 120af8681859ee0b4d03ea9bd498075e21e6332b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 21 Jan 2019 21:17:27 +0000
Subject: [PATCH 309/773] overlays: Add ssd1306 overlay for OLED display

See: https://github.com/raspberrypi/firmware/issues/1098

Signed-off-by: mincepi <mincepi@gmail.com>
---
 arch/arm/boot/dts/overlays/Makefile           |  1 +
 arch/arm/boot/dts/overlays/README             | 31 ++++++++++++++++
 .../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 +++++++++++++++++++
 3 files changed, 68 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	spi2-1cs.dtbo \
 	spi2-2cs.dtbo \
 	spi2-3cs.dtbo \
+	ssd1306.dtbo \
 	superaudioboard.dtbo \
 	sx150x.dtbo \
 	tc358743.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1950,6 +1950,37 @@ Params: cs0_pin                 GPIO pin
                                 is 'okay' or enabled).
 
 
+Name:   ssd1306
+Info:   Overlay for activation of SSD1306 over I2C OLED display framebuffer.
+Load:   dtoverlay=ssd1306,<param>=<val>
+Params: address                 Location in display memory of first character.
+                                (default=0)
+        width                   Width of display. (default=128)
+        height                  Height of display. (default=64)
+        offset                  virtual channel a. (default=0)
+        normal                  Has no effect on displays tested. (default=not
+                                set)
+        sequential              Set this if every other scan line is missing.
+                                (default=not set)
+        remapped                Set this if display is garbled. (default=not
+                                set)
+        inverted                Set this if display is inverted and mirrored.
+                                (default=not set)
+
+        Examples:
+        Typical usage for 128x64 display: dtoverlay=ssd1306,inverted
+
+        Typical usage for 128x32 display: dtoverlay=ssd1306,inverted,sequential
+
+        i2c_baudrate=400000 will speed up the display.
+
+        i2c_baudrate=1000000 seems to work even though it's not officially
+        supported by the hardware, and is faster still.
+
+        For more information refer to the device datasheet at:
+        https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
+
+
 Name:   superaudioboard
 Info:   Configures the SuperAudioBoard sound card
 Load:   dtoverlay=superaudioboard,<param>=<val>
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts
@@ -0,0 +1,36 @@
+// Overlay for SSD1306 128x64 and 128x32 OLED displays
+/dts-v1/;
+/plugin/;
+
+/ {
+    compatible = "brcm,bcm2718";
+
+    fragment@0 {
+	target = <&i2c1>;
+	__overlay__ {
+	    status = "okay";
+
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    ssd1306: oled@3c{
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,width = <128>;
+		solomon,height = <64>;
+		solomon,page-offset = <0>;
+	    };
+	};
+    };
+
+    __overrides__ {
+	address = <&ssd1306>,"reg:0";
+	width = <&ssd1306>,"solomon,width:0";
+	height = <&ssd1306>,"solomon,height:0";
+	offset = <&ssd1306>,"solomon,page-offset:0";
+	normal = <&ssd1306>,"solomon,segment-no-remap?";
+	sequential = <&ssd1306>,"solomon,com-seq?";
+	remapped = <&ssd1306>,"solomon,com-lrremap?";
+	inverted = <&ssd1306>,"solomon,com-invdir?";
+    };
+};