1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
From a307b7b21da2c1b61226a5f1b2b56b6582fe7cc4 Mon Sep 17 00:00:00 2001
From: David Plowman <david.plowman@raspberrypi.com>
Date: Tue, 29 Jun 2021 14:38:23 +0100
Subject: [PATCH] Documentation: devicetree: Add documentation for
imx378 sensor
The imx378 sensor is compatible with the imx477 and shares common
device tree settings.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
---
.../devicetree/bindings/media/i2c/imx378.yaml | 113 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 114 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx378.yaml
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx378.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx378.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
+
+maintainers:
+ - Naushir Patuck <naush@raspberypi.com>
+
+description: |-
+ The Sony IMX378 is a 1/2.3-inch CMOS active pixel digital image sensor
+ with an active array size of 4056H x 3040V. It is programmable through
+ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
+ 4 data lanes.
+
+properties:
+ compatible:
+ const: sony,imx378
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ VDIG-supply:
+ description:
+ Digital I/O voltage supply, 1.05 volts
+
+ VANA-supply:
+ description:
+ Analog voltage supply, 2.8 volts
+
+ VDDL-supply:
+ description:
+ Digital core voltage supply, 1.8 volts
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the xclr pin, if any.
+ Must be released (set high) after all supplies and INCK are applied.
+
+ # See ../video-interfaces.txt for more details
+ port:
+ type: object
+ properties:
+ endpoint:
+ type: object
+ properties:
+ data-lanes:
+ description: |-
+ The sensor supports either two-lane, or four-lane operation.
+ For two-lane operation the property must be set to <1 2>.
+ items:
+ - const: 1
+ - const: 2
+
+ clock-noncontinuous:
+ type: boolean
+ description: |-
+ MIPI CSI-2 clock is non-continuous if this property is present,
+ otherwise it's continuous.
+
+ link-frequencies:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies.
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - VANA-supply
+ - VDIG-supply
+ - VDDL-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx378: sensor@10 {
+ compatible = "sony,imx378";
+ reg = <0x1a>;
+ clocks = <&imx378_clk>;
+ VANA-supply = <&imx378_vana>; /* 2.8v */
+ VDIG-supply = <&imx378_vdig>; /* 1.05v */
+ VDDL-supply = <&imx378_vddl>; /* 1.8v */
+
+ port {
+ imx378_0: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ data-lanes = <1 2>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
+
+...
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17548,6 +17548,7 @@ M: Raspberry Pi Kernel Maintenance <kern
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/imx378.yaml
F: Documentation/devicetree/bindings/media/i2c/imx477.yaml
F: drivers/media/i2c/imx477.c
|
