target/linux/ath79/dts/qca9563_tplink_cpe710-v1.dts


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca956x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "TP-Link CPE710 v1";
	compatible = "tplink,cpe710-v1", "qca,qca9563";

	aliases {
		label-mac-device = &eth0;
		led-boot = &led_lan;
		led-failsafe = &led_lan;
		led-upgrade = &led_lan;
	};

	leds {
		compatible = "gpio-leds";

		led_lan: lan {
			label = "blue:lan";
			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
		};

		wlan5g {
			label = "blue:wlan5g";
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "Reset button";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};
};

&pcie {
	status = "okay";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x040000>;
				read-only;
			};

			partition@40000 {
				label = "u-boot-env";
				reg = <0x040000 0x010000>;
			};

			partition@50000 {
				label = "partition-table";
				reg = <0x050000 0x010000>;
				read-only;
			};

			info: partition@60000 {
				label = "info";
				reg = <0x060000 0x010000>;
				read-only;
			};

			partition@70000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x070000 0xf50000>;
			};

			partition@fc0000 {
				label = "config";
				reg = <0xfc0000 0x030000>;
				read-only;
			};

			art: partition@ff0000 {
				label = "art";
				reg = <0xff0000 0x010000>;
				read-only;
			};
		};
	};
};

&pinmux {
	mdio_pins: mdio_pins {
		/* GPIO 10 as MDIO(0x20), GPIO 8 as MDC(0x21) */
		pinctrl-single,bits = <0x8 0x00200021 0x00ff00ff>;
	};
};

&mdio0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&mdio_pins>;

	phy-mask = <0x10>;

	phy4: ethernet-phy@4 {
		reg = <4>;
		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
	};
};

&eth0 {
	status = "okay";

	phy-handle = <&phy4>;
	phy-mode = "sgmii";

	nvmem-cells = <&macaddr_info_8>;
	nvmem-cell-names = "mac-address";

	qca956x-serdes-fixup;

	gmac-config {
		device = <&gmac>;
	};
};

&info {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_info_8: macaddr@8 {
		reg = <0x8 0x6>;
	};
};