1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "NEC Aterm WF1200CR";
compatible = "nec,wf1200cr", "qca,qca9561";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
leds {
compatible = "gpio-leds";
/* other LEDs are connected to ath10k (QCA9888) gpiochip */
led_power_green: power_green {
label = "green:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_red: power_red {
label = "red:power";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
router {
label = "rt";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "devdata";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "devconf";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
label = "misc";
reg = <0x060000 0x010000>;
read-only;
};
partition@70000 {
compatible = "seama";
label = "firmware";
reg = <0x070000 0x780000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
ð0 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001919>;
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
switch-phy-addr-swap = <0>;
};
};
ð1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_swled_enable_pins>;
};
&gpio {
switch_leds {
gpio-hog;
gpios = <14 GPIO_ACTIVE_HIGH>, /* WAN */
<19 GPIO_ACTIVE_HIGH>; /* LAN */
output-high;
line-name = "led:wan-lan";
};
};
&pinmux {
pinmux_swled_enable_pins: swled_enable_pins {
pinctrl-single,bits =
<0xc 0x240000 0xff0000>, /* WAN */
<0x10 0x10000000 0xff000000>; /* LAN */
};
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
|
