1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9558_mikrotik_routerboard-92x.dtsi"
/ {
compatible = "mikrotik,routerboard-922uags-5hpacd", "qca,qca9558";
model = "MikroTik RouterBOARD 922UAGS-5HPacD";
ath10k-leds {
compatible = "gpio-leds";
wlan5g {
label = "green:wlan5g";
gpios = <&ath10k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
gpio-export {
gpio_usb_power {
gpio-export,name = "mikrotik:power:usb";
gpio-export,output = <0>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
};
i2c: i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <5>;
i2c-gpio,timeout-ms = <1>;
};
sfp1: sfp {
compatible = "sff,sfp";
i2c-bus = <&i2c>;
maximum-power-milliwatt = <1000>;
los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
// Toggling GPIO16 actually enables/disables the transmitter,
// but the SFP driver does not seem to be using it.
};
};
&pcie0 {
status = "okay";
ath10k: wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
};
};
&pcie1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb1 {
status = "okay";
};
&usb_phy1 {
status = "okay";
};
&mdio1 {
status = "okay";
phy_sfp: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
sfp = <&sfp1>;
};
};
ð1 {
status = "okay";
phy-handle = <&phy_sfp>;
pll-data = <0x03000000 0x00000101 0x00001616>;
qca955x-sgmii-fixup;
gmac-config {
device = <&gmac>;
};
fixed-link {
speed = <1000>;
full-duplex;
};
};
|
