1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "librerouter,librerouter-v1", "qca,qca9558";
model = "LibreRouter v1";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "green:system";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wifi_green {
label = "green:wlan2g";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
status_blue {
label = "blue:status";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
/* GPIO1 (poe_pass) and GPIO2 (watchdog) requires jtag disabled */
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <1000>;
always-running;
};
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
};
};
&pcie1 {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
};
};
&usb_phy0 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb_phy1 {
status = "okay";
};
&usb1 {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x7c0000>;
};
partition@810000 {
label = "fw2";
reg = <0x810000 0x7d0000>;
};
partition@fd0000 {
label = "res";
reg = <0xfd0000 0x20000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
0x0c 0x00000080 /* PORT6: SGMII */
0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
0x50 0xcf37cf37 /* LED_CTRL0 */
0x54 0xcf37cf37 /* LED_CTRL1 */
0x58 0xcf37cf37 /* LED_CTRL2 */
0x5c 0x0 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
ð0 {
status = "okay";
pll-data = <0xa6000000 0x00000101 0x00001616>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
phy-handle = <&phy0>;
};
ð1 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001616>;
nvmem-cells = <&macaddr_art_6>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_art_c>;
nvmem-cell-names = "mac-address";
};
&art {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
macaddr_art_c: macaddr@c {
reg = <0xc 0x6>;
};
};
|
