target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca955x.dtsi"

/ {
	compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
	model = "MikroTik RouterBOARD wAP G-5HacT2HnD";

	aliases {
		label-mac-device = &eth1;
		mdio-gpio1 = &mdio2;
		serial0 = &uart;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	mdio2: mdio {
		compatible = "virtual,mdio-gpio";

		gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
			<&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
		#address-cells = <1>;
		#size-cells = <0>;

		phy0: ethernet-phy@0 {
			reg = <0>;
			device_type = "ethernet-phy";

			phy-mode = "sgmii";

			at803x-override-sgmii-link-check;
		};
	};
};

&eth1 {
	status = "okay";

	mtd-mac-address = <&hard_config 0x10>;

	pll-data = <0x03000101 0x80000101 0x80001313>;
	phy-handle = <&phy0>;

	qca955x-sgmii-fixup;

	gmac-config {
		device = <&gmac>;
	};
};

&spi {
	status = "okay";

	num-cs = <1>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "RouterBoot";
				reg = <0x0 0x20000>;
				read-only;
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "bootloader1";
					reg = <0x0 0xe000>;
					read-only;
				};

				hard_config: partition@e000 {
					label = "hard_config";
					reg = <0xe000 0x1000>;
					read-only;
				};

				partition@f000 {
					label = "bios";
					reg = <0xf000 0x1000>;
					read-only;
				};

				partition@10000 {
					label = "bootloader2";
					reg = <0x10000 0xf000>;
					read-only;
				};

				partition@1f000 {
					label = "soft_config";
					reg = <0x1f000 0x1000>;
				};
			};

			partition@20000 {
				compatible = "mikrotik,minor";
				label = "firmware";
				reg = <0x020000 0xfe0000>;
			};
		};
	};
};

&uart {
	status = "okay";
};

&wmac {
	status = "okay";

	qca,no-eeprom;
};

&pcie0 {
	status = "okay";

	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0 0 0 0 0>;
	};
};