1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
From 7cb1dad7a7dfe4cfe55ebe86930dd6aef0de66b4 Mon Sep 17 00:00:00 2001
From: Eugen Hristev <eugen.hristev@microchip.com>
Date: Fri, 13 Nov 2020 15:24:29 +0200
Subject: [PATCH 131/247] pinctrl: at91-pio4: add support for fewer lines on
last PIO bank
Some products, like sama7g5, do not have a full last bank of PIO lines.
In this case for example, sama7g5 only has 8 lines for the PE bank.
PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines.
To cope with this situation, added a data attribute that is product dependent,
to specify the number of lines of the last bank.
In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK,
adjust the total number of lines accordingly.
This will avoid advertising 160 lines instead of the actual 136, as this
product supports, and to avoid reading/writing to invalid register addresses.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-at91-pio4.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -71,8 +71,15 @@
/* Custom pinconf parameters */
#define ATMEL_PIN_CONFIG_DRIVE_STRENGTH (PIN_CONFIG_END + 1)
+/**
+ * struct atmel_pioctrl_data - Atmel PIO controller (pinmux + gpio) data struct
+ * @nbanks: number of PIO banks
+ * @last_bank_count: number of lines in the last bank (can be less than
+ * the rest of the banks).
+ */
struct atmel_pioctrl_data {
unsigned nbanks;
+ unsigned last_bank_count;
};
struct atmel_group {
@@ -980,11 +987,13 @@ static const struct dev_pm_ops atmel_pct
* We can have up to 16 banks.
*/
static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
- .nbanks = 4,
+ .nbanks = 4,
+ .last_bank_count = ATMEL_PIO_NPINS_PER_BANK,
};
static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = {
- .nbanks = 5,
+ .nbanks = 5,
+ .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */
};
static const struct of_device_id atmel_pctrl_of_match[] = {
@@ -1025,6 +1034,11 @@ static int atmel_pinctrl_probe(struct pl
atmel_pioctrl_data = match->data;
atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks;
atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK;
+ /* if last bank has limited number of pins, adjust accordingly */
+ if (atmel_pioctrl_data->last_bank_count != ATMEL_PIO_NPINS_PER_BANK) {
+ atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK;
+ atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count;
+ }
atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(atmel_pioctrl->reg_base))
|
