1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
|
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -94,6 +94,7 @@ struct m25p {
u16 addr_width;
u8 erase_opcode;
u8 *command;
+ size_t max_read_len;
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -341,6 +342,7 @@ static int m25p80_read(struct mtd_info *
struct m25p *flash = mtd_to_m25p(mtd);
struct spi_transfer t[2];
struct spi_message m;
+ loff_t ofs;
DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
dev_name(&flash->spi->dev), __func__, "from",
@@ -364,8 +366,6 @@ static int m25p80_read(struct mtd_info *
t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
spi_message_add_tail(&t[0], &m);
- t[1].rx_buf = buf;
- t[1].len = len;
spi_message_add_tail(&t[1], &m);
/* Byte count starts at zero. */
@@ -373,13 +373,6 @@ static int m25p80_read(struct mtd_info *
mutex_lock(&flash->lock);
- /* Wait till previous write/erase is done. */
- if (wait_till_ready(flash)) {
- /* REVISIT status return?? */
- mutex_unlock(&flash->lock);
- return 1;
- }
-
/* FIXME switch to OPCODE_FAST_READ. It's required for higher
* clocks; and at this writing, every chip this driver handles
* supports that opcode.
@@ -387,11 +380,44 @@ static int m25p80_read(struct mtd_info *
/* Set up the write data buffer. */
flash->command[0] = OPCODE_READ;
- m25p_addr2cmd(flash, from, flash->command);
- spi_sync(flash->spi, &m);
+ ofs = 0;
+ while (len) {
+ size_t readlen;
+ size_t done;
+ int ret;
+
+ ret = wait_till_ready(flash);
+ if (ret) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ if (flash->max_read_len > 0 &&
+ flash->max_read_len < len)
+ readlen = flash->max_read_len;
+ else
+ readlen = len;
+
+ t[1].rx_buf = buf + ofs;
+ t[1].len = readlen;
+
+ m25p_addr2cmd(flash, from + ofs, flash->command);
+
+ spi_sync(flash->spi, &m);
- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
+ done = m.actual_length - m25p_cmdsz(flash) -
+ FAST_READ_DUMMY_BYTE;
+ if (done != readlen) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ ofs += done;
+ len -= done;
+ }
+
+ *retlen = ofs;
mutex_unlock(&flash->lock);
@@ -901,6 +927,12 @@ static int __devinit m25p_probe(struct s
flash->mtd.erase = m25p80_erase;
flash->mtd.read = m25p80_read;
+ if (data && data->max_read_len) {
+ flash->max_read_len = data->max_read_len;
+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
+ flash->max_read_len);
+ }
+
/* sst flash chips use AAI word program */
if (info->jedec_id >> 16 == 0xbf)
flash->mtd.write = sst_write;
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -26,6 +26,7 @@ struct flash_platform_data {
char *type;
const char **part_probes;
+ size_t max_read_len;
/* we'll likely add more ... use JEDEC IDs, etc */
};
|
