1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
/*
* OpenMesh A60 support
*
* Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
* Copyright (C) 2014-2017 Sven Eckelmann <sven@open-mesh.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/platform_data/phy-at803x.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-gpio-buttons.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-usb.h"
#define A60_GPIO_LED_RED 22
#define A60_GPIO_LED_GREEN 23
#define A60_GPIO_LED_BLUE 13
#define A60_GPIO_BTN_RESET 17
#define A60_KEYS_POLL_INTERVAL 20 /* msecs */
#define A60_KEYS_DEBOUNCE_INTERVAL (3 * A60_KEYS_POLL_INTERVAL)
#define A60_WMAC_CALDATA_OFFSET 0x1000
static struct gpio_led a40_leds_gpio[] __initdata = {
{
.name = "a40:red:status",
.gpio = A60_GPIO_LED_RED,
}, {
.name = "a40:green:status",
.gpio = A60_GPIO_LED_GREEN,
}, {
.name = "a40:blue:status",
.gpio = A60_GPIO_LED_BLUE,
}
};
static struct gpio_led a60_leds_gpio[] __initdata = {
{
.name = "a60:red:status",
.gpio = A60_GPIO_LED_RED,
}, {
.name = "a60:green:status",
.gpio = A60_GPIO_LED_GREEN,
}, {
.name = "a60:blue:status",
.gpio = A60_GPIO_LED_BLUE,
}
};
static struct gpio_keys_button a60_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = A60_KEYS_DEBOUNCE_INTERVAL,
.gpio = A60_GPIO_BTN_RESET,
.active_low = 1,
},
};
static struct at803x_platform_data a60_at803x_data = {
.disable_smarteee = 1,
.enable_rgmii_rx_delay = 1,
.enable_rgmii_tx_delay = 1,
};
static struct mdio_board_info a60_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.mdio_addr = 1,
.platform_data = &a60_at803x_data,
},
{
.bus_id = "ag71xx-mdio.0",
.mdio_addr = 2,
.platform_data = &a60_at803x_data,
},
};
static void __init a60_setup_qca955x_eth_cfg(u32 mask,
unsigned int rxd,
unsigned int rxdv,
unsigned int txd,
unsigned int txe)
{
void __iomem *base;
u32 t;
base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
t = mask;
t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
iounmap(base);
}
static void __init a60_setup_common(void)
{
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
u8 mac[6];
ath79_register_usb();
ath79_register_m25p80(NULL);
ath79_register_gpio_keys_polled(-1, A60_KEYS_POLL_INTERVAL,
ARRAY_SIZE(a60_gpio_keys),
a60_gpio_keys);
ath79_init_mac(mac, art, 0x02);
ath79_register_wmac(art + A60_WMAC_CALDATA_OFFSET, mac);
a60_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
ath79_register_mdio(0, 0x0);
mdiobus_register_board_info(a60_mdio0_info, ARRAY_SIZE(a60_mdio0_info));
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
/* GMAC0 is connected to the PHY1 */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = BIT(1);
ath79_eth0_pll_data.pll_1000 = 0x82000101;
ath79_eth0_pll_data.pll_100 = 0x80000101;
ath79_eth0_pll_data.pll_10 = 0x80001313;
ath79_register_eth(0);
/* GMAC1 is connected to MDIO1 in SGMII mode */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth1_data.phy_mask = BIT(2);
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_eth1_pll_data.pll_100 = 0x80000101;
ath79_eth1_pll_data.pll_10 = 0x80001313;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
ath79_register_pci();
}
static void __init a40_setup(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(a40_leds_gpio), a40_leds_gpio);
a60_setup_common();
}
MIPS_MACHINE(ATH79_MACH_A40, "A40", "OpenMesh A40", a40_setup);
static void __init a60_setup(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(a60_leds_gpio), a60_leds_gpio);
a60_setup_common();
}
MIPS_MACHINE(ATH79_MACH_A60, "A60", "OpenMesh A60", a60_setup);
|
