path: root/package/network/utils/iw/patches/001-nl80211_h_sync.patch

--- a/nl80211.h
+++ b/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -249,6 +249,45 @@
  */
 
 /**
+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
+ *
+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
+ * support offloading VLAN functionality in a manner where the driver exposes a
+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
+ * case. Frames received from stations that are not assigned to any VLAN are
+ * delivered on the main netdev and frames to such stations can be sent through
+ * that main netdev.
+ *
+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
+ * %NL80211_ATTR_VLAN_ID.
+ */
+
+/**
+ * DOC: TID configuration
+ *
+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
+ * attribute given in wiphy capabilities.
+ *
+ * The necessary configuration parameters are mentioned in
+ * &enum nl80211_tid_config_attr and it will be passed to the
+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
+ *
+ * If the configuration needs to be applied for specific peer then the MAC
+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
+ * configuration will be applied for all the connected peers in the vif except
+ * any peers that have peer specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * will be overwritten.
+ *
+ * All this configuration is valid only for STA's current connection
+ * i.e. the configuration will be reset to default when the STA connects back
+ * after disconnection/roaming, and this configuration will be cleared when
+ * the interface goes down.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -571,6 +610,14 @@
  *	set of BSSID,frequency parameters is used (i.e., either the enforcing
  *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
  *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ *	Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
+ *	%NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
+ *	included, these IEs through %NL80211_ATTR_IE are specified by the user
+ *	space based on the best possible BSS selected. Thus, if the driver ends
+ *	up selecting a different BSS, it can modify these IEs accordingly (e.g.
+ *	userspace asks the driver to perform PMKSA caching with BSS1 and the
+ *	driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
+ *	has to get updated with the apt PMKID).
  *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
  *	the ESS in case the device is already associated and an association with
  *	a different BSS is desired.
@@ -1101,6 +1148,9 @@
  *	peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
  *	content. The frame is ethernet data.
  *
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ *	is passed using %NL80211_ATTR_TID_CONFIG attribute.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1325,6 +1375,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_PROBE_MESH_LINK,
 
+	NL80211_CMD_SET_TID_CONFIG,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1580,7 +1632,8 @@ enum nl80211_commands {
  *	flag is included, then control port frames are sent over NL80211 instead
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
- *	flag.
+ *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
+ *	frames are not forwared over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -2373,6 +2426,53 @@ enum nl80211_commands {
  *	the allowed channel bandwidth configurations. (u8 attribute)
  *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
  *
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
+ *	(u16).
+ *
+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
+ *
+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
+ *	using attributes from &enum nl80211_iftype_akm_attributes. This
+ *	attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
+ *	supported AKM suites capability per interface. AKMs advertised in
+ *	%NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
+ *	advertised for a specific interface type.
+ *
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ *	nested attribute with &enum nl80211_tid_config_attr sub-attributes;
+ *	on output (in wiphy attributes) it contains only the feature sub-
+ *	attributes.
+ *
+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
+ *	port in order to forward/receive them as ordinary data frames.
+ *
+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
+ *	dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
+ *	An optional parameter configured through %NL80211_CMD_SET_PMKSA.
+ *	Drivers that trigger roaming need to know the lifetime of the
+ *	configured PMKSA for triggering the full vs. PMKSA caching based
+ *	authentication. This timeout helps authentication methods like SAE,
+ *	where PMK gets updated only by going through a full (new SAE)
+ *	authentication instead of getting updated during an association for EAP
+ *	authentication. No new full authentication within the PMK expiry shall
+ *	result in a disassociation at the end of the lifetime.
+ *
+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
+ *	terms of percentage of %NL80211_ATTR_PMK_LIFETIME
+ *	(u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
+ *	parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
+ *	driver to trigger a full authentication roam (without PMKSA caching)
+ *	after the reauthentication threshold time, but before the PMK lifetime
+ *	has expired.
+ *
+ *	Authentication methods like SAE need to be able to generate a new PMKSA
+ *	entry without having to force a disconnection after the PMK timeout. If
+ *	no roaming occurs between the reauth threshold and PMK expiration,
+ *	disassociation is still forced.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ *	transmit power to stay within regulatory limits. u32, dBi.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2835,6 +2935,21 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_EDMG_CHANNELS,
 	NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
 
+	NL80211_ATTR_VLAN_ID,
+
+	NL80211_ATTR_HE_BSS_COLOR,
+
+	NL80211_ATTR_IFTYPE_AKM_SUITES,
+
+	NL80211_ATTR_TID_CONFIG,
+
+	NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
+
+	NL80211_ATTR_PMK_LIFETIME,
+	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
+
+	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3554,6 +3669,8 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
  *	This is a nested attribute that contains the wmm limitation per AC.
  *	(see &enum nl80211_wmm_rule)
+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
+ *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3583,6 +3700,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_20MHZ,
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 	NL80211_FREQUENCY_ATTR_WMM,
+	NL80211_FREQUENCY_ATTR_NO_HE,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -3780,6 +3898,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
+ * @NL80211_RRF_NO_HE: HE operation not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -3797,6 +3916,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_HT40PLUS		= 1<<14,
 	NL80211_RRF_NO_80MHZ		= 1<<15,
 	NL80211_RRF_NO_160MHZ		= 1<<16,
+	NL80211_RRF_NO_HE		= 1<<17,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4503,6 +4623,7 @@ enum nl80211_key_default_types {
  *	See &enum nl80211_key_default_types.
  * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
  *	Defaults to @NL80211_KEY_RX_TX.
+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
  *
  * @__NL80211_KEY_AFTER_LAST: internal
  * @NL80211_KEY_MAX: highest key attribute
@@ -4518,6 +4639,7 @@ enum nl80211_key_attributes {
 	NL80211_KEY_TYPE,
 	NL80211_KEY_DEFAULT_TYPES,
 	NL80211_KEY_MODE,
+	NL80211_KEY_DEFAULT_BEACON,
 
 	/* keep last */
 	__NL80211_KEY_AFTER_LAST,
@@ -4674,6 +4796,69 @@ enum nl80211_tx_power_setting {
 };
 
 /**
+ * enum nl80211_tid_config - TID config state
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
+ */
+enum nl80211_tid_config {
+	NL80211_TID_CONFIG_ENABLE,
+	NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_tid_config_attr - TID specific configuration.
+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
+ *	for per-vif configuration; doesn't list the ones that are generic
+ *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
+ *	per peer instead.
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer
+ *	is selected, if set indicates that the new configuration overrides
+ *	all previous peer configurations, otherwise previous peer specific
+ *	configurations should be left untouched. If peer is selected then
+ *	it will reset particular TID configuration of that peer and it will
+ *	not accept other TID config attributes along with peer.
+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
+ *	Its type is u16.
+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
+ *	specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
+ *	Its type is u8.
+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
+ *	transmission, user-space sets this configuration in
+ *	&NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
+ *	the max value is advertised by the driver in this attribute on
+ *	output in wiphy capabilities.
+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
+ *	transmission, user-space sets this configuration in
+ *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
+ *	the max value is advertised by the driver in this attribute on
+ *	output in wiphy capabilities.
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
+ *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
+ *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
+ *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
+ *	the values from &nl80211_tid_config.
+ */
+enum nl80211_tid_config_attr {
+	__NL80211_TID_CONFIG_ATTR_INVALID,
+	NL80211_TID_CONFIG_ATTR_PAD,
+	NL80211_TID_CONFIG_ATTR_VIF_SUPP,
+	NL80211_TID_CONFIG_ATTR_PEER_SUPP,
+	NL80211_TID_CONFIG_ATTR_OVERRIDE,
+	NL80211_TID_CONFIG_ATTR_TIDS,
+	NL80211_TID_CONFIG_ATTR_NOACK,
+	NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
+	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
+	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
+	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+
+	/* keep last */
+	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
+	NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_packet_pattern_attr - packet pattern attribute
  * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
  * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
@@ -5484,6 +5669,26 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
  *	station mode (SAE password is passed as part of the connect command).
  *
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
+ *	with VLAN tagged frames and separate VLAN-specific netdevs added using
+ *	vconfig similarly to the Ethernet case.
+ *
+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
+ *	feature, which prevents bufferbloat by using the expected transmission
+ *	time to limit the amount of data buffered in the hardware.
+ *
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
+ *	and can receive key configuration for BIGTK using key indexes 6 and 7.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
+ *	forwarding of preauth frames over the control port. They are then
+ *	handled as ordinary data frames.
+ *
+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
+ *
+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
+ *      in IBSS mode, essentially by dropping their state.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5529,6 +5734,12 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_EXT_KEY_ID,
 	NL80211_EXT_FEATURE_STA_TX_PWR,
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
+	NL80211_EXT_FEATURE_VLAN_OFFLOAD,
+	NL80211_EXT_FEATURE_AQL,
+	NL80211_EXT_FEATURE_BEACON_PROTECTION,
+	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
+	NL80211_EXT_FEATURE_PROTECTED_TWT,
+	NL80211_EXT_FEATURE_DEL_IBSS_STA,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6151,12 +6362,14 @@ enum nl80211_ftm_responder_stats {
  * @NL80211_PREAMBLE_HT: HT preamble
  * @NL80211_PREAMBLE_VHT: VHT preamble
  * @NL80211_PREAMBLE_DMG: DMG preamble
+ * @NL80211_PREAMBLE_HE: HE preamble
  */
 enum nl80211_preamble {
 	NL80211_PREAMBLE_LEGACY,
 	NL80211_PREAMBLE_HT,
 	NL80211_PREAMBLE_VHT,
 	NL80211_PREAMBLE_DMG,
+	NL80211_PREAMBLE_HE,
 };
 
 /**
@@ -6349,6 +6562,10 @@ enum nl80211_peer_measurement_attrs {
  *	is valid)
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
  *	the maximum FTMs per burst (if not present anything is valid)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
+ *	trigger based ranging measurement is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
+ *	if non trigger based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -6364,6 +6581,8 @@ enum nl80211_peer_measurement_ftm_capa {
 	NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
 	NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
 	NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
+	NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
+	NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_CAPA_ATTR,
@@ -6393,6 +6612,20 @@ enum nl80211_peer_measurement_ftm_capa {
  * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
  * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
  *	(flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
+ *	measurement (flag).
+ *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
+ *	mutually exclusive.
+ *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ *	ranging will be used.
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ *	ranging measurement (flag)
+ *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
+ *	mutually exclusive.
+ *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ *	ranging will be used.
  *
  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
@@ -6409,6 +6642,8 @@ enum nl80211_peer_measurement_ftm_req {
 	NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
@@ -6548,5 +6783,51 @@ enum nl80211_obss_pd_attributes {
 	NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
 };
 
+/**
+ * enum nl80211_bss_color_attributes - BSS Color attributes
+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
+ *
+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
+ *
+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
+ */
+enum nl80211_bss_color_attributes {
+	__NL80211_HE_BSS_COLOR_ATTR_INVALID,
+
+	NL80211_HE_BSS_COLOR_ATTR_COLOR,
+	NL80211_HE_BSS_COLOR_ATTR_DISABLED,
+	NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
+
+	/* keep last */
+	__NL80211_HE_BSS_COLOR_ATTR_LAST,
+	NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes
+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
+ *
+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
+ *	attribute for each interface type that supports AKM suites specified in
+ *	%NL80211_IFTYPE_AKM_ATTR_SUITES
+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
+ *	AKM suites for the specified interface types.
+ *
+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
+ */
+enum nl80211_iftype_akm_attributes {
+	__NL80211_IFTYPE_AKM_ATTR_INVALID,
+
+	NL80211_IFTYPE_AKM_ATTR_IFTYPES,
+	NL80211_IFTYPE_AKM_ATTR_SUITES,
+
+	/* keep last */
+	__NL80211_IFTYPE_AKM_ATTR_LAST,
+	NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
+};
 
 #endif /* __LINUX_NL80211_H */