aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* bmips: automatically detect RAM sizeÁlvaro Fernández Rojas2021-03-087-30/+196
| | | | | | | | | Introduce new patch for automatically detecting RAM size. Some boards have a different amount of RAM depending on the HW revision. Therefore, automatically detecting the RAM size instead of hard-coding it will reduce the number of device definitions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: improve CPU frequency patchÁlvaro Fernández Rojas2021-03-081-10/+9
| | | | | | Fixes BCM6358 address and calculations. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: AD1018-nor: add NAND flashDaniel González Cabanelas2021-03-081-0/+24
| | | | | | | | | The Sercomm AD1018 has a NAND flash. We recently added support for NANDs in this target. Use the internal NAND as additional storage. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: dts: comestic changesÁlvaro Fernández Rojas2021-03-088-22/+18
| | | | | | Improve and refactor device tree files. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: remove unneeded console from bootargsÁlvaro Fernández Rojas2021-03-086-6/+6
| | | | | | console parameter is no longer needed after latest procd update. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: automatically detect CPU frequencyÁlvaro Fernández Rojas2021-03-081-0/+239
| | | | | | | Some BCM63xx SoCs support multiple CPU frequencies depending on HW configuration. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: remove no longer needed sysupgrade hackDaniel Golle2021-03-071-18/+0
| | | | | | | Keeping configuration is now handled in fstools like for other types of flash as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: remove execute bit and shebang from 01_ledsAdrian Schmutzler2021-03-061-2/+0
| | | | | | | This was added recently and thus overlooked in 85b1f4d8ca2d ("treewide: remove execute bit and shebang from board.d files"). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: work-around borked QCA SDK bootloaderDaniel Golle2021-03-061-0/+1
| | | | | | | | | | | | | | | | | The bootloader of many ipq806x boards seems to require the config node of the FIT image to be 'config@1' (or a secific different value). This requirement used to be implicitely satisfied because OpenWrt used to also call the configuration node inside a FIT image 'config@1'. However, as recent U-Boot now prohibits the use of the '@' symbol as part of node names, this was changed by commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes") Explicitely restore the default name of the configuration node to 'config@1' on ipq806x. (ipq807x is unaffected as DEVICE_DTS_CONFIG default is set "config@hk01" in target/linux/ipq807x/image/Makefile) Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: work-around borked QCA SDK bootloaderDaniel Golle2021-03-061-0/+1
| | | | | | | | | | | | | | | The bootloader of many ipq40xx boards seems to require the config node of the FIT image to be 'config@1' (or a secific different value). This requirement used to be implicitely satisfied because OpenWrt used to also call the configuration node inside a FIT image 'config@1'. However, as recent U-Boot now prohibits the use of the '@' symbol as part of node names, this was changed by commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes") Explicitely restore the default name of the configuration node to 'config@1' on ipq40xx. Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: disable RTC on Bananapi R64 and refresh patchesDaniel Golle2021-03-064-5/+26
| | | | | | | | The in-SoC RTC of the Bananapi R64 is more disruptive than useful without a battery connected. Disable it to not have Linux use the RTC provided time 2000-01-01 00:00:00 after power-loss. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: make AddDepends/usb-serial selectiveAdrian Schmutzler2021-03-066-11/+11
| | | | | | | Make packages depending on usb-serial selective, so we do not have to add kmod-usb-serial manually for every device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-0690-90/+0
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: 5.10: refresh configsIlya Lipnitskiy2021-03-066-28/+28
| | | | | | | | Run-tested on Ubiquiti EdgeRouter X. Compile tested on all other subtargets. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: port and refresh patches, ralink drvIlya Lipnitskiy2021-03-0634-201/+333
| | | | | | | | | | | | | | | | | | | Enable testing kernel. Fix compile errors by using new kernel APIs. Fix fuzz by manually editing patches to ensure the code goes in the right place. For 721-NET-no-auto-carrier-off-support.patch, revert upstream commit a307593a6 to keep the OpenWrt ralink driver operational. Add mt7621-pci-phy patch to select REGMAP_MMIO as discussed in PR #3693 and #3952. Run automatic quilt refresh on the rest. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: rename patches to follow guideIlya Lipnitskiy2021-03-0636-0/+0
| | | | | | | | | Rename patches to follow the 3-digit classification from the OpenWrt Developer Guide. https://openwrt.org/docs/guide-developer/build-system/use-patches-with-buildsystem#naming_patches Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: delete upstreamed patchesIlya Lipnitskiy2021-03-0629-2440/+0
| | | | | | | | 0098-disable_cm.patch is not needed because upstream fixed CM handling. The rest are straightforward removals of upstreamed patches. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.10: copy patches from 5.4Ilya Lipnitskiy2021-03-0667-0/+8783
| | | | | | Strict copy, no changes made. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: copy config-5.4 to config-5.10Ilya Lipnitskiy2021-03-066-0/+1202
| | | | | | Strict copy, no changes made. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* Revert "ramips: add support for kernel 5.10"Adrian Schmutzler2021-03-0651-7679/+2
| | | | | | | | | This reverts commit b4aad29a1d7ad77d67073c1c54b28c429c64ed9b. This was accidentally folded into a single commit. Remove it and apply it properly again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx, mt7621, oxnas, rockchip, zynq: remove PLUGIN_HOSTCCIlya Lipnitskiy2021-03-066-6/+0
| | | | | | This config symbol should not be defined in target configs. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel: generic: filter out CONFIG_PLUGIN_HOSTCCIlya Lipnitskiy2021-03-063-4/+3
| | | | | | | | | | | | It appears to be an automatic Kconfig symbol that varies depending on the host platform. There is no need to define it in target configs, so filter it out. Also sort config-filter entries alphabetically. Cc: Adrian Schmutzler <mail@adrianschmutzler.de> Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: add support for kernel 5.10Ilya Lipnitskiy2021-03-0551-2/+7679
| | | | | | | | | | | | | | | | | | | | | | | | | Enable testing kernel. Delete upstreamed patches: 0098-disable_cm.patch can be dropped, upstream fixed CM handling. Fix compile errors by using new kernel APIs. Fix fuzz by manually editing patches to ensure the code goes in the right place. For 721-NET-no-auto-carrier-off-support.patch, revert upstream commit a307593a6 to keep the OpenWrt ralink driver operational. Add mt7621-pci-phy patch to select REGMAP_MMIO as discussed in PR #3693 and #3952. Rename patches to follow the 3-digit classification from the OpenWrt Developer Guide. Run automatic quilt refresh. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: 5.4: refresh configsIlya Lipnitskiy2021-03-056-274/+17
| | | | | | Automatic refresh by running make kernel_oldconfig on each target. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* apm821xx: add support for kernel 5.10 for testingChristian Lamparter2021-03-0514-2/+725
| | | | | | | | | | | | This patch copies over refreshed patches from 5.4. - dropped crypto patches (they got upstreamed) - dropped renesas USB 3 firmware loader (they got upstreamed) - NAND now needs extra device-properties for ECC settings. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mediatek: mt7622: bpi-r64: allow MAC addresses to be inheritedDaniel Golle2021-03-053-6/+14
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.20Rui Salvaterra2021-03-0526-1103/+57
| | | | | | | | | | | | | | | | | | | | | | | | Also add a new kconfig symbol (CONFIG_KCMP) to the generic config, disabling the SYS_kcmp syscall (it was split from CONFIG_CHECKPOINT_RESTORE, which is disabled by default, so the previous behaviour is kept). Removed (upstreamed) patches: 070-net-icmp-pass-zeroed-opts-from-icmp-v6-_ndo_send-bef.patch 081-wireguard-device-do-not-generate-ICMP-for-non-IP-pac.patch 082-wireguard-queueing-get-rid-of-per-peer-ring-buffers.patch 083-wireguard-kconfig-use-arm-chacha-even-with-no-neon.patch 830-v5.12-0002-usb-serial-option-update-interface-mapping-for-ZTE-P685M.patch Manually rebased patches: 313-helios4-dts-status-led-alias.patch 104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch Run tested: ath79 (TL-WDR3600) mvebu (Turris Omnia) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm4908: prepare to support TP-Link Archer C2300 V1Rafał Miłecki2021-03-055-0/+239
| | | | | | | | | | It's a BCM4906 based device (2 CPU cores). It has 512 MiB of RAM, 4 LAN ports, 1 WAN port, 2 USB ports, NAND flash. WiFi unknown at this point. Flashing is possible using CFE only, proper image will be worked on later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: config-5.10: add missing symbolsIlya Lipnitskiy2021-03-051-0/+7
| | | | | | Add symbols missing after latest crypto.mk and WireGuard changes. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel: backport GCC 10 usbip build fix for 5.4Rui Salvaterra2021-03-051-0/+33
| | | | | | | | | | | | | From the original commit message: "With GCC 10, building usbip triggers error for multiple definition of 'udev_context', in: - libsrc/vhci_driver.c:18 and - libsrc/usbip_host_common.c:27. Declare as extern the definition in libsrc/usbip_host_common.c." Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: remove symbols from 5.10 no longer present on upstreamLuis Araneda2021-03-051-2/+0
| | | | | | | | | | REFCOUNT_FULL was removed for linux 5.5: commit fb041bb7c0a9 (locking/refcount: Consolidate implementations of refcount_t) COMMON_CLK_VERSATILE was removed on linux 5.8: commit 5f55f1fb187d (clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE) Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* bcm63xx: rename upstreamed patchSieng Piaw Liew2021-03-052-6/+12
| | | | | | | | | Patch to fix kernel panic was recently accepted upstream so rename patch and add acked lines to reflect that. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> (add the same patch for v5.10) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: b53: update the BCM5365 UID in the fixupDaniel González Cabanelas2021-03-051-2/+2
| | | | | | | | | | The BCM5365 UID was updated in the driver, but we should also update it in the fixup. Fixes: cbcac4fde8ba ("kernel: b53: update the BCM5365 UID") Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (Ammend commit description, add Fixes tag) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: bcm2711: disable HW_RANDOM_BCM2835Álvaro Fernández Rojas2021-03-051-1/+0
| | | | | | This driver is only present on BCM2708, BCM2709 and BCM2710. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: rename mtk-hsdma to hsdma-mt7621Ilya Lipnitskiy2021-03-041-2/+2
| | | | | | | | | | | | Follows upstream rename: https://lore.kernel.org/driverdev-devel/20210130034507.2115280-1-ilya.lipnitskiy@gmail.com/ Fixes ramips builds on 5.4.102 Cc: John Audia <graysky@archlinux.us> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ipq40xx: net: phy: qca807x: fix GPIO driverRobert Marko2021-03-051-0/+1
| | | | | | | | | | | While rebasing into setting bits instead of magic values, I accidentally forgot to actually set the force bit. Without it using the pins as GPIO-s did not actually work. Fixes: b5c93ed ("ipq40xx: add Qualcomm QCA807x driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ath79: enable AT803X PHY for kernel 5.10David Bauer2021-03-051-0/+1
| | | | | | | The config symbol for the AT803x device driver was lost when adding kernel 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: replace chipselect workaround with a proper patchDavid Bauer2021-03-052-31/+89
| | | | | | | | | | | Debugging the SPI CS issue with kernel 5.10 resulted in a better understanding for the root cause and a proper patch with a better explanation. Exchange the old hack patch with a more efficient (and upstreamable) solution. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel-5.4: bump to 5.4.102 and refresh patchesJason A. Donenfeld2021-03-0498-615/+92
| | | | | | | | | | | | | | 5.4.102 backported a lot of stuff that our WireGuard backport already did, in addition to other patches we had, so those patches were removed from that part of the series. In the process other patches were refreshed or reworked to account for upstream changes. This commit involved `update_kernel.sh -v -u 5.4`. Cc: John Audia <graysky@archlinux.us> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mediatek: mt7622: check firmware metadataDaniel Golle2021-03-042-1/+2
| | | | | | | | | | All mt7622 devices except for the UBI-variant of the mt7622-rfb1 carry metadata appended to the sysupgrade image. Add it for the mt7622-rfb1-ubi as well and check it on sysupgrade to avoid accidentally flashing firmware for the wrong device (or variant or future DEVICE_COMPAT_VERSION). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: generic: add further missing symbolsPetr Štetiar2021-03-031-0/+24
| | | | | | | | Compile testing i.mx6 with ALL_KMODS=y, PACKAGE_perf=y and bunch of tracing/probing symbols has unveiled bunch of missing config options so add them. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: add 5.10 as testing kernelPetr Štetiar2021-03-031-1/+1
| | | | | | So anyone interested can help with testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: refresh kernel config with 5.10 symbolsPetr Štetiar2021-03-031-4/+37
| | | | | | | | | | | | Just by running `make kernel_oldconfig` and unsetting following options manually as those cores are cortex-a7 based and thus irrelevant for the currently default cortex-a9 used cores. CONFIG_CLK_IMX6SL is not set CONFIG_CLK_IMX6SX is not set CONFIG_CLK_IMX6UL is not set Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: copy kernel 5.4 config and patches to 5.10Petr Štetiar2021-03-034-0/+669
| | | | | | So the changes are visible in the next step. Removed upstreamed patches. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: mt7622: change image generationOskari Lemmela2021-03-031-7/+6
| | | | | | | - set only one EFI system partition - use shorter path for DEVICE_DTS file Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: mt7622: use ptgen generated MBR headerOskari Lemmela2021-03-031-2/+2
| | | | | | | mt7622 uses MBR partition for booting from SD card. Add hybrid MBR entry with boot flag after PMBR entry. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* bmips: switch to upstream brcmnand patchÁlvaro Fernández Rojas2021-03-021-4/+8
| | | | | | This patch has been accepted upstream for v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel-5.10: backport chacha non block size optimizationsJason A. Donenfeld2021-03-022-0/+310
| | | | | | | | | | These make a big difference when doing WireGuard with small armv7 routers, and the 5.4 backport already has it. Suggested-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel-5.4: backport fd16931a2f51 for chacha neonJason A. Donenfeld2021-03-02126-329/+336
| | | | | | | | | | | | | | Without this patch, the chacha block counter is not incremented on neon rounds, resulting in incorrect calculations and corrupt packets. This also switches to using `--no-numbered --zero-commit` so that future diffs are smaller. Reported-by: Hans Geiblinger <cybrnook2002@yahoo.com> Reviewed-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* bcm53xx: add support for reading NVRAM based on DT mappingRafał Miłecki2021-03-022-0/+141
| | | | | | | This is required for devices that use NVRAM data for detecting currently used firmware partition (e.g. Linksys devices). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 20:15:10 +0000