aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: ca8210: Fix crash by zero initializing dataHauke Mehrtens2022-12-061-0/+30
| | | | | | | This fixes crashes at bootup on pistachio. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 48025b8ac9c62ead241ea1daf1092993fb94aeac)
* bcm4908: Refresh kernel patchesHauke Mehrtens2022-12-061-24/+2430
| | | | | | | | | | Refresh the kernel patches for this target. No manual changes. Fixes: 45ac906c641 ("bcm4908: update DTS files with the latest changes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit b97e5ac785960c13199239dd4821dd53f3801da3) [ dropped 5.15 change not present in 22.03 ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mvebu: disable also wrt32x due to broken switchHannu Nyman2022-12-061-1/+0
| | | | | | | | | | | | | | | | | | | | WRT32x has identical hardware as WRT3200ACM, so handle the devices identically. Reference to: * FCC approval: WRT32x is a new name for WRT3200ACM hardware https://fccid.io/Q87-WRT3200ACM#Grant-TCB-5 FCC IDENTIFIER: | Q87-WRT3200ACM C2PC: - Adding a new model name: WRT32X; * Linux switch definition: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=2716777b4f21649fb907b4a4fb96e1c8d0a5ec16 MV88E6176 is mostly compatible to MV88E6352 and is documented in the same functional specification. Add support for it. Fixes: a0bae2fef8 "mvebu: cortexa9: disable devices using broken mv88e6176 switch" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mvebu: cortexa9: disable devices using broken mv88e6176 switchPetr Štetiar2022-12-051-0/+4
| | | | | | | | | | | | | | | | | | | Several users have reported, that devices using mv88e6176 switch are seriously broken, basically turning that switch into a hub. Until fixed those devices should be disabled. I've used TOH with "Switch 88E6176" filter, which provided me with the following list of likely affected devices: * Linksys WRT1200AC v1/v2, WRT1900AC v1/v2 * SolidRun ClearFog Pro * Turris Omnia That device list more or less corresponds with the list of devices mentioned in the linked bug reports. References: https://github.com/openwrt/openwrt/issues/11077 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: expand rootfs for DIR-825-B1 with unused spaceAlan Luck2022-12-031-6/+21
| | | | | | | | | | | Expand currently unused flash space to roofs for DIR-825-B1 by using the same flash space as the old ar71xx big image without moving the caldata. With some testing this partition is use by the OEM firmware but if changed is regenerated which allows reverting to OEM firmware Signed-off-by: Alan Luck <luckyhome2008@gmail.com> (cherry picked from commit aca8bb5cc332f0ffdf4249e76b0a56716f98bef0)
* kernel: update U-Boot nvmem driver to v6.2 release versionRafał Miłecki2022-12-013-0/+168
| | | | | | | | | | Backport queued patches that 1. Fix CRC32 calculation for redundant images 2. Fix CRC32 on big-endian 3. Fix parting images with Broadcom header Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 797177ad85cbf92b5c1e270751eaca9eb4f34f30)
* bcm4908: update DTS files with the latest changesRafał Miłecki2022-12-018-8/+298
| | | | | | | | The most affecting change is move of files from bcm4908/ to the bcmbca/. That required updating few paths. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 45ac906c6415cebd12281088da6b06668c057f0a)
* bcm4908: fix Asus GT-AX6000 imageRafał Miłecki2022-12-014-3/+66
| | | | | | | | 1. Include Linux DTB 2. Add 50991 variant (seems to differ by 1 PHY we don't support yet) Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b8f8c6f2dd8d47216117cb5b78184531ab21dddd)
* bcm4908: use upstream patches for Asus GT-AC5300 LEDsRafał Miłecki2022-12-013-3/+12
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d51e990ff81ad0335294749e8d2fc8e69ceb9179)
* layerscape: Fix SPI-NOR issues with vendor patchesPawel Dembicki2022-11-294-0/+130
| | | | | | | | | | | | | | | | | | | | | For some reason LS1012A and LS1046A devboards don't work well with Spansion SPI NOR flash. It cause read and write errors like: [ 27.285887] jffs2: Newly-erased block contained word 0xc20031985 at offset 0x025ae000 [ 27.468922] jffs2: Newly-erased block contained word 0x0 at offset 0x02573000 [ 27.502615] jffs2: Newly-erased block contained word 0xe723f41e5823f110 at offset 0x02572000 [ 27.541550] jffs2: Newly-erased block contained word 0x1a7d266ee6 at offset 0x02571000 [ 27.577195] jffs2: Newly-erased block contained word 0x5d000bae8d52fec6 at offset 0x02570000 [ 27.611800] jffs2: Newly-erased block contained word 0x63515aee63515a4b at offset 0x0256f000 [ 27.651749] jffs2: Newly-erased block contained word 0xc20031985 at offset 0x0256e000 [ 27.825593] jffs2: Newly-erased block contained word 0xc20031985 at offset 0x0252e000 NXP have found workarround and applied in their vendor kernel version. They force 1x tx and 1x rx lines in qspi. That method fix issues. This patch ports patches from NXP LSDK tree. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit 2e4fe289ceb02139e6f1cf8dcae31ad14efba52c)
* ipq40xx: luma_wrtq-acn329: swap ethernet MAC addressesTomasz Maciej Nowak2022-11-271-0/+5
| | | | | | | Adjust them according to OEM firmware. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: mikrotik: use OpenWrt loader for initram imageJohn Thomson2022-11-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Return to using the OpenWrt kernel loader to decompress and load kernel initram image. Continue to use the vmlinuz kernel for squashfs. Mikrotik's bootloader RouterBOOT on some ath79 devices is failing to boot the current initram, due to the size of the initram image. On the ath79 wAP-ac: a 5.7MiB initram image would fail to boot After this change: a 6.6MiB initram image successfully loads This partially reverts commit e91344776b9ba7c864be88d915c9c0df0eb790dd. An alternative of using RouterBOOT's capability of loading an initrd ELF section was investigated, but the OpenWrt kernel loader allows larger image. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> (cherry picked from commit 62b72eafe49d2eecd3692691152ed86a0327fcb0) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Fixes: #9954
* ath79: fix MAC address assigment for TP-Link TL-WR740N/TL-WR741ND v4Will Moss2022-11-271-3/+2
| | | | | | | | On TP-Link TL-WR740N/TL-WR741ND v4 LAN MAC address (eth1 in DTS) is main device MAC address, so do not increment it. WAN MAC is LAN MAC + 1. Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit 288b0004bfa981e3dbb8678ee3289509c3930217)
* ath79: D-Link DIR-825 B1 add factory.bin recipeWill Moss2022-11-271-4/+6
| | | | | | | | | | | - Bring back factory.bin image which was missing after porting device to ath79 target - Use default sysupgrade.bin image recipe - Adjust max image size according to new firmware partition size after "ath79: expand rootfs for DIR-825-B1 with unused space (aca8bb5)" changes - Remove support of upgrading from version 19.07, because partition size changes mentioned above Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit a58146d452c50387256d4a616c055ddf3248496f)
* ath79: disable image building for Ubiquiti EdgeSwitch 8XPRoger Pueyo Centelles2022-11-271-0/+1
| | | | | | | | | | | The downstream OpenWrt driver for the BCM53128 switch ceased to work, rendering the 8 LAN ports of the device unusable. This commit disables image building while the problem is being solved. See issue #10374 for more details. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 5a1d7d8c1b422827673b13a034473683f5af3d6f)
* lantiq: add 6.1 tag to upstream patchAleksander Jan Bajkowski2022-11-271-2/+3
| | | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 802ca492d85e6f6af05676518889d4de50697477)
* lantiq: enable interrupts on second VPEsAleksander Jan Bajkowski2022-11-271-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is needed to handle interrupts by the second VPE on the Lantiq ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to the second VPE results in a hang. Currently, the vsmp_init_secondary() function is responsible for enabling these interrupts. It only enables Malta-specific interrupts (SW0, SW1, HW4 and HW5). The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware interrupts are wired to an ICU instance. Each VPE has an independent instance of the ICU. The mapping of the ICU interrupts is shown below: SW0(IP0) - IPI call, SW1(IP1) - IPI resched, HW0(IP2) - ICU 0-31, HW1(IP3) - ICU 32-63, HW2(IP4) - ICU 64-95, HW3(IP5) - ICU 96-127, HW4(IP6) - ICU 128-159, HW5(IP7) - timer. This patch enables all interrupt lines on the second VPE. This problem affects multithreaded SoCs with a custom interrupt controller. SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the future, this may be replaced with some generic solution. Tested on Lantiq xRX200. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit fbd33d61648ae8982fbada7ad3b6d8222b367ab5)
* lantiq: xrx200: backport upstream network fixesAleksander Jan Bajkowski2022-11-273-0/+93
| | | | | | | | This series contains bug fixes that may occur under memory pressure. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 9423fc424c7313e470f61224eeebbaee3ff477a2)
* kernel: bump 5.10 to 5.10.156John Audia2022-11-2710-24/+24
| | | | | | | | | Manually rebased: ath79/patches-5.10/910-unaligned_access_hacks.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit acb10faa35748ca3a7e0f559c431a1a752fdc529)
* kernel: bump 5.10 to 5.10.155John Audia2022-11-272-7/+7
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9e137bb10e2652dd1eb826e228d9842f872789f9)
* bcm27xx: fix CI build after config refreshÁlvaro Fernández Rojas2022-11-264-0/+8
| | | | | | | | | As reported by @kuanyili on Github, commit 3564c22e46d5 broke CI build: https://github.com/openwrt/openwrt/commit/3564c22e46d5b025b174ee9b25291413a4621b21#commitcomment-91091149 Adding back those symbols fixes the problem. Fixes: 3564c22e46d5 ("bcm27xx: disable duplicate sdhost driver") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: disable duplicate sdhost driverJohn Audia2022-11-234-16/+9
| | | | | | | | | | | | | | | | | Enabling both CONFIG_MMC_BCM2835 and CONFIG_MMC_BCM2835_SDHOST causes this error in dmesg: Error: Driver 'sdhost-bcm2835' is already registered, aborting... Disabling CONFIG_MMC_BCM2835 and leaving CONFIG_MMC_BCM2835_SDHOST enabled avoids this error. Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> [Disable driver for all subtargets, refresh configs, tweak description] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 3f7cc9d0144dbc429d19c1801cc6be149f969db9)
* kernel: support "linux,rootfs" DT property for splitting rootfsRafał Miłecki2022-11-211-5/+6
| | | | | | | | | | OpenWrt's support for splitting rootfs (to create an extra "rootfs_data" partition) is limited to partitions called "rootfs". Upstream kernel allows any name partition to be rootfs if it has "linux,rootfs" property set. Add split support to such partitions in OpenWrt code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e4770db163a9585c43bb70dc5d6d1e45ef848e4a)
* bcm53xx: update DTS files with the latest changesRafał Miłecki2022-11-2117-7/+2144
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8cdafa149eda4e343905ccf00cad34ff2b52c85b)
* kernel: backport support for "linux,rootfs" in DTRafał Miłecki2022-11-219-51/+95
| | | | | | | | | | This DT property allows marking flash partition that Linux should use as a root device. It's useful for devices that don't use U-Boot and cmdline parser for partitioning. It may be used with "fixed-partitions" or some dynamic partitioning based on flash content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d33e49857e3ad76586ebe55334996b15cd45ca1b)
* kernel: split out mtd hack for CONFIG_FIT_PARTITION + rootfsRafał Miłecki2022-11-213-4/+20
| | | | | | | | | This is some hack on top of our old hack. Use separated patch for it so it's easier to understand and actually possible to describe. We should ideally get rid of this (and we actually did with kernels 5.15+). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6a64eb2664c13bc7d6800747066603c27fcad8e0)
* ipq40xx: ZTE MF286D: fix DEVICE_PACKAGESLech Perczak2022-11-131-1/+1
| | | | | | | | | | Backporting ZTE MF289F introduced an override of DEVICE_PACKAGES for MF286D, which removed packages needed for built-in modem support. Fix assignment type to restore those. Fixes: 3e15a54bb0ef ("ipq40xx: Add ZTE MF289F") Reported-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* generic: fix unset symbolDavid Bauer2022-11-131-0/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.10 to 5.10.154John Audia2022-11-137-7/+7
| | | | | | | | | | All patches automatically rebased. Compile-tested: x86/64 Run-tested: x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit e7bd3767a96a8a84be7ea4730798a7a08dbb20d0)
* kernel: bump 5.10 to 5.10.153John Audia2022-11-1310-36/+35
| | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 87edb650c74a73d854bc01c0aed46d38dafb09a0)
* ramips: improve compatibility for Youku YK-L2 and YK-L1 seriesShiji Yang2022-11-124-2/+10
| | | | | | | | | | | | | | | Add UIMAGE_NAME and UIMAGE_MAGIC to allow users to directly install initramfs-kernel.bin from the stock firmware Web UI. At the same time, this change makes it possible to boot OpenWrt with the official u-boot. Notice: Since the stock firmware is based on OpenWrt and the configuration will be retained by default during the upgrade process, so we must use initramfs-kernel.bin to do a initial installation. After the system restarts, install sysupgrade.bin and do not retain any configuration. Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit eba0a8deb65de70b0d913f9ec8910640a79d0191)
* ramips: gl-mt1300: downclock SPI to 50MHzMichael Lyle2022-11-121-2/+1
| | | | | | | | | | | | | | | | The SPI max frequency was set to 80MHz, considerably higher than the vendor clocks it in their firmware (10MHz). Multiple users reported jffs2 corruption/instability in GitHub issue #10461. My unit has a W25Q256; datasheet specifies maximum SPI frequency for read command of 50MHz. Thanks to @DragonBlueP for suggesting to eliminate m25p,fast-read; and @MPannen1979 for identifying the problem. Fixes: #10461 Signed-off-by: Michael Lyle <mlyle@lyle.org> (cherry picked from commit 961e01fc67e7d9e60557df3474fa326216aa4839)
* ramips: mt7621: use seama-lzma-loader for D-Link DIR-860L B1Szabolcs Hubai2022-11-121-4/+1
| | | | | | | | | | | | | | | Fix the LZMA ERROR 1 with a single line of recipe instead of duplicating "uimage-lzma-loader". While reviewing my original submission of commit ce1957100411 David suggested to use $(Device/uimage-lzma-loader), but due to the specific needs of the vendor bootloader that simple oneliner didn't work. The new $(Device/seama-lzma-loader) is for those SEAMA capable bootloaders. Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit 18801f26485e3a0dcb79dc9f9b174aed5821b758)
* ramips: rt3883: use seama-lzma-loader for D-Link DIR-645Szabolcs Hubai2022-11-121-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the support topic [0] of the GitHub issue #10634 it was found out (based on boot logs) that the uimage-lzma-loader (commit 09faa73c53bd) never worked, as an earlier workaround (commit 6fba88de1913) negated the recipe: 3: System Boot system code via Flash. ## Booting image at bc050000 ... raspi_read: from:50000 len:40 .raspi_read: from:50000 len:c .raspi_read: from:50000 len:1fa000 ................................We have SEAMA, Image Size = 2072512 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 64 Starting kernel ... [ 0.000000] Linux version 5.4.188 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)) #0 Sat Apr 16 12:59:34 2022 [ 0.000000] SoC Type: Ralink RT3883 ver:1 eco:5 [ 0.000000] printk: bootconsolde [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] MIPS: machine is D-Link DIR-645 [ 0.000000] Initrd not found or empty - disabling initrd Using the new seama-lzma-loader it's able to boot OpenWrt 22.03 and OpenWrt SNAPSHOT too: 3: System Boot system code via Flash. ## Booting image at bc050000 ... raspi_read: from:50000 len:40 .raspi_read: from:50000 len:c .raspi_read: from:50000 len:48b004 .........................................................................We have SEAMA, Image Size = 4763588 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 64 Starting kernel ... OpenWrt kernel loader for MIPS based SoC Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> Decompressing kernel... done! Starting kernel at 80000000... [ 0.000000] Linux version 5.10.144 (xabolcs@ut2004) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20774+2-b71affaf8b) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 Tue Sep 27 23:02:30 2022 [ 0.000000] SoC Type: Ralink RT3883 ver:1 eco:5 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] MIPS: machine is D-Link DIR-645 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 The OKLI Loader is unable to read the flash on this SoC: Looking for OpenWrt image... not found! ('0xddbaddba' at 0xbc051000) 0: https://forum.openwrt.org/t/136435 Fixes: GitHub issue #10634 ("V22.03.0 release currently does not work on D-Link DIR-645") Fixes: 09faa73c53bd ("ramips: rt3883: use lzma-loader for DIR-645") Tested-by: Glenn Fowler <gfowler1@outlook.com> Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit c293b492dfa114b67e90d5434edfeba17ba29980)
* ramips: define lzma-loader recipe for SEAMA devicesSzabolcs Hubai2022-11-121-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define "Device/seama-lzma-loader" recipe for SEAMA devices to help contributors avoid doing recipe mistakes. In a forum topic [0] I was under the impression that the good old uimage-lzma-loader didn't fix the LZMA ERROR 1 for a device. It was found out, that the uimage-lzma-loader never worked because the KERNEL variable was overriden earlier (also an LZMA ERROR 1 related commit, 6fba88de1913), and the "use lzma-loader" fix (commit 09faa73c53bd) didn't catch that to include the "loader-kernel" part. I contributed an LZMA ERROR 1 fix (commit ce1957100411) for the SEAMA device D-Link DIR-860L B1, where I had to duplicate the whole uimage-lzma-loader recipe because of the special needs of the vendor bootloader. This new recipe reuse most of uimage-lzma-loader's KERNEL definiton to avoid duplication. It uses "relocate-kernel" as it needed for D-Link DIR-860L B1 to boot from flash, and it's compatible with D-Link DIR-645 too. It repacks lzma-loader with lzma for kernel (without uImage), because these weird hacked vendor bootloaders accepts only LZMA compressed kernels from flash: We have SEAMA, Image Size = 4759794 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK It uses uImage header for initramfs kernel to be little bit verbose. 0: https://forum.openwrt.org/t/136435/10 Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit e7ad68d682bdb73b7d13d6c4b8d1d65d9f050138)
* ath79: fix MAC address assignment for TP-Link ar7241 devicesWill Moss2022-11-121-4/+3
| | | | | | | | | | On TP-Link ar7241 devices LAN and WAN interfaces are swapped. Keeping that in mind fix MAC address assignment as used in vendor firmware: LAN MAC - main MAC stored in u-boot and printed on label WAN MAC - LAN MAC + 1 Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit 5a1af6ed621d4547d8bf486d0d3e4de5443b9b58)
* ath79: add support for Linksys EA4500 v3Edward Chow2022-11-124-0/+238
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Linksys EA4500 v3 wireless router Hardware -------- SoC: Qualcomm Atheros QCA9558 RAM: 128M DDR2 (Winbond W971GG6KB-25) FLASH: 128M SPI-NAND (Spansion S34ML01G100TFI00) WLAN: QCA9558 3T3R 802.11 bgn QCA9580 3T3R 802.11 an ETH: Qualcomm Atheros QCA8337 UART: 115200 8n1, same as ea4500 v2 USB: 1 single USB 2.0 host port BUTTON: Reset - WPS LED: 1x system-LED LEDs besides the ethernet ports are controlled by the ethernet switch MAC Address: use address(sample 1) source label 94:10:3e:xx:xx:6f caldata@cal_macaddr lan 94:10:3e:xx:xx:6f $label wan 94:10:3e:xx:xx:6f $label WiFi4_2G 94:10:3e:xx:xx:70 caldata@cal_ath9k_soc WiFi4_5G 94:10:3e:xx:xx:71 caldata@cal_ath9k_pci Installation from Serial Console ------------ 1. Connect to the serial console. Power up the device and interrupt autoboot when prompted 2. Connect a TFTP server reachable at 192.168.1.0/24 (e.g. 192.168.1.66) to the ethernet port. Serve the OpenWrt initramfs image as "openwrt.bin" 3. To test OpenWrt only, go to step 4 and never execute step 5; To install, auto_recovery should be disabled first, and boot_part should be set to 1 if its current value is not. ath> setenv auto_recovery no ath> setenv boot_part 1 ath> saveenv 4. Boot the initramfs image using U-Boot ath> setenv serverip 192.168.1.66 ath> tftpboot 0x84000000 openwrt.bin ath> bootm 5. Copy the OpenWrt sysupgrade image to the device using scp and install it like a normal upgrade (with no need to keeping config since no config from "previous OpenWRT installation" could be kept at all) # sysupgrade -n /path/to/openwrt/sysupgrade.bin Note: Like many other routers produced by Linksys, it has a dual firmware flash layout, but because I do not know how to handle it, I decide to disable it for more usable space. (That is why the "auto_recovery" above should be disabled before installing OpenWRT.) If someone is interested in generating factory firmware image capable to flash from stock firmware, as well as restoring the dual firmware layout, commented-out layout for the original secondary partitions left in the device tree may be a useful hint. Installation from Web Interface ------------ 1. Login to the router via its web interface (default password: admin) 2. Find the firmware update interface under "Connectivity/Basic" 3. Choose the OpenWrt factory image and click "Start" 4. If the router still boots into the stock firmware, it means that the OpenWrt factory image has been installed to the secondary partitions and failed to boot (since OpenWrt on EA4500 v3 does not support dual boot yet), and the router switched back to the stock firmware on the primary partitions. You have to install a stock firmware (e.g. 3.1.6.172023, downloadable from https://www.linksys.com/support-article?articleNum=148385 ) first (to the secondary partitions) , and after that, install OpenWrt factory image (to the primary partitions). After successful installation of OpenWrt, auto_recovery will be automatically disabled and router will only boot from the primary partitions. Signed-off-by: Edward Chow <equu@openmail.cc> (cherry picked from commit 50f727b7737d118f7d44986181e305af0624c41d)
* ath79: add support to TrendNet TEW-673GRUKorey Caro2022-11-114-4/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the TrendNet TEW-673GRU to ath79. This device was supported in 19.07.9 but was deprecated with ar71xx. This is mostly a copy of D-Link DIR-825 B1. Updates have been completed to enable factory.bin and sysupgrade.bin both. Code improvements to DTS file and makefile. Architecture | MIPS Vendor | Qualcomm Atheros bootloader | U-Boot System-On-Chip | AR7161 rev 2 (MIPS 24Kc V7.4) CPU/Speed | 24Kc V7.4 680 MHz Flash-Chip | Macronix MX25L6405D Flash size | 8192 KiB RAM Chip: | ProMOS V58C2256164SCI5 × 2 RAM size | 64 MiB Wireless | 2 x Atheros AR922X 2.4GHz/5.0GHz 802.11abgn Ethernet | RealTek RTL8366S Gigabit w/ port based vlan support USB | Yes 2 x 2.0 Initial Flashing Process: 1) Download 22.03 tew-673gru factory bin 2) Flash 22.03 using TrendNet GUI OpenWRT Upgrade Process 3) Download 22.03 tew-673gru sysupgrade.bin 4) Flash 22.03 using OpenWRT GUI Signed-off-by: Korey Caro <korey.caro@gmail.com> (cherry picked from commit 12cee869890853716ff1ee2dbd0a89c87a0ee544)
* qoriq: fix typo in FEATURESStijn Tintel2022-11-111-1/+1
| | | | | | | | There is no root-part FEATURE. Reported-by: Karl Palsson <karlp@etactica.com> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit dc51342d34c267d6dc8c69d72979cab394f49d4b)
* ramips: backport TP-Link RE200 v3/v4 LED fixSungbo Eo2022-11-085-11/+54
| | | | | | | | | | | | | | This backports a commit which fixes LEDs vor the RE200 like this: Set power LED to gpio 43 instead of 44 for v3 and v4. Set red wifi LED to gpio 40 (was assigned to `red:wifi5g`). Tested by the author of the initial v3 and v4 commit. Tested-by: Richard Fröhning <misanthropos@gmx.de> Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit 02aa7a2bb9b6bdc8033d30c97f5b49534206a37c)
* ipq40xx: fix ZTE MF289F port mappingLech Perczak2022-11-052-1/+5
| | | | | | | | | | | With initial support, the mapping of LAN1/WAN and LAN2 ports was swapped. Fix it to match labels on the device, keeping the "WAN" personality of the first port - in line with current state of DSA setup in master for this device. Tested-by: Marcin Gajda <mgajda@o2.pl> Tested-by: Christian Heuff <christian@heuff.at> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ipq40xx: Fix wrong GPIO for internal status LED on ZTE MF289FGiammarco Marzano2022-11-051-1/+1
| | | | | | | | | | | Change GPIO from 10 to 35 to make it works as expected Fixes: 0de6a3339f1a ("ipq40xx: Add ZTE MF289F") Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit cd93980abb0c6452fd3e9c1213caaf26d221fcd4) Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-11-056-7/+466
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 0de6a3339f1aadc1de2c9371435e3de239a00645) [Backported to 22.03: added DTS to the makefile patch, fixed ipq-wifi inclusion for MF286D] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* bcm4908: backport upstream BQL support for bcm4908_enetRafał Miłecki2022-11-031-0/+45
| | | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ae57770c956888337249688b9a16c25dd4fd63fb) (cherry picked from commit 6198eb3e6448e9a43a32d3f46b7d0543424f455b)
* kernel: bump 5.10 to 5.10.152John Audia2022-11-017-13/+15
| | | | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> [Add CONFIG_ARM64_ERRATUM_1742098 to config] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 52400e167d83bd0bfc40394f9383529212b545ad)
* kernel: bump 5.10 to 5.10.151John Audia2022-11-013-3/+3
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 7a27ac605c7e55b7350c0bea76ca5d6eb218c5ea)
* kernel: bump 5.10 to 5.10.150John Audia2022-11-0133-280/+132
| | | | | | | | | | | | Manually rebased: bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> [Move gro_skip in 680-NET-skip-GRO-for-foreign-MAC-addresses.patch to old position] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit aa2fa2eb76f13e48cd39d844dca34627da00cb5d)
* ramips: Correct Unielec 01 and 06 dts wan macaddr byte locationDavid Bentham2022-10-303-6/+6
| | | | | | | | | | | Recent backport patch b5cb5f352d3133ac8384275be7d47264ad135e74 had missed changing the macaddr_factory address location. This patch corrects the address location. Fixes: b5cb5f352d31 ("ramips: fix WAN mac address allocation for Unielec 01 and 06 models") Signed-off-by: David Bentham <db260179@gmail.com> [Fix dts node name too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm4908: backport bcm4908_enet fix for NULL dereferenceRafał Miłecki2022-10-284-4/+103
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 31e4e566545e53594bafe846c170a5d2fa6821e3)
* bcm4908: optimize Ethernet driver by using build_skb()Rafał Miłecki2022-10-281-0/+152
| | | | | | | | This should slightly improve performance thanks to the better cache usage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6a02205a4d94a7b6a888ec55d1aecd60ebb20d77)