aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape/image
Commit message (Collapse)AuthorAgeFilesLines
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-232-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add i2c peripherials on LS1012A-RDBPawel Dembicki2020-11-231-0/+3
| | | | | | | | | | | | LS1012A-RDB equipped in some i2c devices: - 3x GPIO Expander: PCAL9555A (NXP) - Gyro: FXAS21002 (NXP) - Accelerometer: FXOS8700 (NXP) - Current & Power Monitor: INA220 (TI) This patch enables i2c peripherials installed on LS1012A-RDB. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: make initramfs kernel fit packedPawel Dembicki2020-11-232-0/+2
| | | | | | | | This will make developing process easier, because dtb will be included into image. Not need to enable initramfs image by default. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: harmonize wrapping for IMAGE/* definitionsAdrian Schmutzler2020-10-262-3/+6
| | | | | | Always keep the first line empty for multi-line IMAGE/* definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: create shared definitions for sdboot devicesAdrian Schmutzler2020-10-262-24/+21
| | | | | | | This moves a few shared variables for SD-Boot devices into common definitions in order to reduce duplicate code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: Change to combined rootfs on sd imagesPawel Dembicki2020-10-264-86/+82
| | | | | | | | | | | | | | | | | | At this moment layerscape images are ext4 only. It causes problem with save changes durring sysupgrade and make "firstboot" and failsafe mode useless. This patch changes sd-card images to squashfs + f2fs combined images. To make place, for saving config, kernel space ar now ext4 partition with fit kernel. This method of image generation is similar to rest of OpenWrt sd-card targets. Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add dtb to sysupgradePawel Dembicki2020-10-263-10/+36
| | | | | | | | | | | | | | | | | | | At this moment sysupgrade replaces only kernel and rootfs. This patch add dtb part to sysupgrade images to avoid situation when old dtb make system broken. Is possible to sysupgrade older images for NOR devices: 1. Firmware partition in bootargs need to be updated to: "49m@0xf00000(firmware)". Env should be saved after changes. 2. After step one, "sysupgrade -F" will work. Run tested: LS1046A-RDB Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [bump PKG_RELEASE for uboot-layerscape] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add layerscape's SATA driver packagePawel Dembicki2020-10-021-1/+8
| | | | | | | | | | | This patch intruduce SATA support for layerscape devices. Target specific package with ahci_qoriq driver was added to local modules.mk. Kmod package was added to default packages for devices with SATA interface. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add missing kmods for i2c peripherialsPawel Dembicki2020-10-021-6/+18
| | | | | | | | This patch adds kmod-hwmon-ina2xx kmod-hwmon-lm90 for boards, which have it installed. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: harmonize device stringsAdrian Schmutzler2020-07-272-60/+48
| | | | | | | | | | | | | | | | | | | | OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: fix indentAdrian Schmutzler2020-07-211-2/+2
| | | | | | Fix indent to be consistent with the rest of the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: define IMAGE_SIZE and LS_SYSUPGRADE_IMAGE_SIZEYangbo Lu2020-07-113-10/+18
| | | | | | | | | Define 64m IMAGE_SIZE for flash firmware.bin since the flash size is 64MB. Define 48m LS_SYSUPGRADE_IMAGE_SIZE for flash sysupgrade.bin which contains maximum 16MB kernel and 32MB rootfs according to memory map. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: support sysupgrade for SD card ext4 rootfsYangbo Lu2020-07-112-5/+35
| | | | | | Support sysupgrade for SD card ext4 rootfs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: support sysupgrade for squashfs rootfsYangbo Lu2020-07-112-5/+14
| | | | | | | Support sysupgrade for all Layerscape boards with squashfs rootfs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: convert to squashfs rootfs for QSPI NOR bootYangbo Lu2020-07-111-17/+5
| | | | | | | | | | | There had been an issue in Layerscape QSPI driver for very long time, which made squashfs,jffs2 rootfs not work on QSPI NOR. And the ubifs had been used as a workaround. Now the issue has been fixed. So convert to use squashfs,jffs2 rootfs on QSPI NOR for Layerscape boards (LS1012ARDB/LS1046ARDB/ LS1088ARDB), and update u-boot bootargs for booting. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* treewide: simplify inclusion of subtarget image filesAdrian Schmutzler2020-06-111-7/+1
| | | | | | | | | | | | | | Many target use a repetitive if-include scheme for their subtarget image files, though their names are consistent with the subtarget names. This patch removes these redundant conditions and just uses the variable for the include where the target setup allows it. For sunxi, this includes a trivial rename of the subtarget image Makefiles. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: define only one package for ls-dplYangbo Lu2020-05-071-3/+3
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain ls-dpl with only one package installing all 4 files as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-mcYangbo Lu2020-05-071-3/+3
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain ls-mc with only one package installing all two images as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for fman-ucodeYangbo Lu2020-05-071-5/+5
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain fman-ucode with only one package installing all two binaries as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-rcwYangbo Lu2020-05-071-1/+1
| | | | | | | | | | We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* kernel: make kmod-i2c-mux selected by dependent modulesSungbo Eo2020-03-161-1/+1
| | | | | | | | | | | | Currently kmod-i2c-mux-* will not get into images unless kmod-i2c-mux is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-i2c-mux-pca954x Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: make kmod-i2c-core selected by dependent modulesSungbo Eo2020-03-131-1/+1
| | | | | | | | | | | | | | | | | | Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-lm75 - kmod-i2c-gpio - kmod-i2c-gpio-custom - kmod-i2c-mux - kmod-i2c-ralink Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add kmod-i2c-mux to DEVICE_PACKAGES for traverse-ls1043Sungbo Eo2020-03-131-1/+1
| | | | | | | kmod-i2c-mux-pca954x will not get into images unless kmod-i2c-mux is added to DEVICE_PACKAGES as well. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* layerscape: sysupgrade: require metadataTomasz Maciej Nowak2020-03-121-0/+1
| | | | | | | | Require the image metadata check so no invalid image could be fed to sysupgrade without force option. Cc: Mathew McBride <matt@traverse.com.au> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: ls10121frdm: add sysupgradeTomasz Maciej Nowak2020-03-121-0/+4
| | | | | | | | | Instead of dangerous rewriting full chip with firmware.bin image to update OpenWrt, add sysupgrade image. This image will be used to update kernel and rootfs, leaving bootloader intact and making recovery possible, without resorting to external hardware tools. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: ls1012afrdm: introduce dynamic partitioningTomasz Maciej Nowak2020-03-121-1/+2
| | | | | | | | | | | | Combine fixed sizes of "kernel" and "rootfs" partitions into one partition managed by OpenWrt splitter, it will allow better management of chip capacity and less maintenance burden when compiled kernel image will outgrow allocated size for kernel partition. This also changes kernel image format, since splitter only manages kernel and rootfs partitions, the dtb needs to be updated with the kernel, so for convenience, kernel is packed to FIT image. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: ls1012afrdm: convert image to squashfsTomasz Maciej Nowak2020-03-121-3/+2
| | | | | | | This commit replaces UBIFS root partition with squashfs+overlay. It's preparation for introducing dynamic partitioning. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: ls1012afrdm: add uncompressed initramfsTomasz Maciej Nowak2020-03-121-0/+1
| | | | | | | Uncompressing of initramfs image fails on board with U-Boot from "QorIQ SDK (FSL Reference Distro) 2.0". Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: resurrect support for FRDM-LS1012ATomasz Maciej Nowak2020-03-121-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: gen_sdcard_head_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: replace backticks by $(...) in gen_*_img.sh scriptsAdrian Schmutzler2019-09-291-1/+1
| | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [decapitalized patch subject at submitter's request] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* layerscape: split up DEVICE_TITLE definitionsMoritz Warning2019-09-252-13/+35
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* layerscape: convert to use TF-A for firmwareBiwen Li2019-06-061-49/+39
| | | | | | | | | | This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: drop armv8_32b supportYangbo Lu2019-06-062-120/+0
| | | | | | | NXP LSDK has decided to drop armv8_32b support considering few users are using it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: rename Traverse boards along SoC linesMathew McBride2019-03-102-9/+7
| | | | | | | | | Upcoming product specification and branding changes mean that the names in tree do not accurately reflect released products. To reduce any confusion, sort our boards by SoC family, e.g traverse-ls1043. Any future boards using Layerscape family SoC's will be treated the same way, e.g Device/traverse-ls/lx/laXXXX. The affected boards so far have only been available through OEM channels and those aren't using the provided sysupgrade. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* layerscape: use MKUBIFS_OPTS for per-device ubi parametersYangbo Lu2018-12-182-6/+3
| | | | | | | UBIFS_OPTS couldn't be used for per-device ubi parameters. Let's use MKUBIFS_OPTS instead. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add LS1021AIOT board supportBiwen Li2018-12-181-0/+16
| | | | | | | | | | | | | | | | | | | | | | | The LS1021A-IoT gateway reference design based on the QorIQ LS1021A processor is a purpose-built, small footprint hardware platform with a wide array of high-speed connectivity and low-speed serial interfaces to support secure delivery of IoT services for home, business or other commercial location. - Combines standards-based, open source software with a feature-rich IoT gateway design to establish a common, open framework for secured IoT service delivery and management. - Provides a wide assortment of high-speed and serial-based connectivity in a compact, highly secure design. - High efficiency through the use of the Arm-based QorIQ LS1021A embedded processor. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com>
* layerscape: add ls1012afrwy support and drop ls1012afrdmYangbo Lu2018-09-222-35/+39
| | | | | | | | | | | | | | | | | | | | | | | ls1012afrdm was no longer supported in NXP Layerscape SDK. Instead a new board ls1012afrwy was introduced in LSDK. This patch is to drop ls1012afrdm and add ls1012afrwy support. Since only 2MB NOR flash could be used, we just put u-boot and firmware on NOR flash, and put kernel/dtb/rootfs on SD card. The Layerscape FRWY-LS1012A board is an ultra-low-cost development platform for LS1012A Series Communication Processors built on Arm Cortex-A53. This tool refines the FRDM-LS1012A with more features for a better hands-on experience for IoT, edge computing, and various advanced embedded applications. Features include easy access to processor I/O, low-power operation, micro SD card storage, an M2 connector, a small form factor, and expansion board options via mikroBUS Click Module. The MicroBUS Module provides easy expansion via hundreds of powerful modules supporting sensors, actuators, memories, and displays. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add SD card boot supportYangbo Lu2018-09-224-0/+117
| | | | | | | | | NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add armv7 subtarget and ls1021atwr board supportYangbo Lu2018-09-222-0/+35
| | | | | | | | | | | | | | | | | | The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: split image makefile per subtargetYangbo Lu2018-09-223-185/+317
| | | | | | | | | | | | This patch is to split image makefile per subtarget. The ARMv7 subtarget will be added in the future. It will be not convinient if only one makefile is used for several subtargets management and future development. This patch also dropped 32-bit Traverse LS1043-S since Traverse only intended to support 64-bit and the 32-bit compile now had an issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define ls-append functionYangbo Lu2018-09-221-73/+50
| | | | | | | This patch is to define a ls-append function for each device to reuse it for image appending. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add u-boot environment support for OpenWrt bootYangbo Lu2018-09-221-6/+16
| | | | | | | This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-18.06Yangbo Lu2018-09-221-9/+21
| | | | | | | | | | | | | | The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to LSDK-18.06Yangbo Lu2018-09-221-6/+6
| | | | | | | | | | | | The rcw source code had been migrated to codeaurora for LSDK-18.06 release and the future release. The source code had also involved ls1012ardb/ls1012afrdm/ ls1088ardb/ls2088ardb rcw, so we updated ls-rcw to LSDK-18.06, reworked the makefile and dropped ls-rcw-bin package in this patch. Also reworked ls-rcw patch to adapt to the latest source code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update fman-ucode to LSDK-18.06Yangbo Lu2018-09-221-3/+3
| | | | | | | | | Actually there was no change for fman-ucode in LSDK-18.06 just tagged with LSDK-18.06. This patch is to rework the fman-ucode makefile to make it more readable, and to use lsdk-1806 as the PKG_VERSION. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add Traverse LS1043-S supportMathew McBride2018-07-301-0/+37
| | | | | | | | | | | | | | | | | | The Traverse LS1043-S board is a router board based on NXP/Freescale's LS1043 SoC, with 4x1GBase-T, 1 SFP and 1 SFP+, as well as miniPCIe and M.2 LTE. Unlike the Layerscape reference boards, the LS1043-S board has NAND flash and uses the mainline U-Boot. This patch implements support for the LS1043-S board, as well as the earlier LS1043-V board. It is our intention that all boards in this family (LS1043-S and later, Five64) will boot the same binary. Not included in this patchset are the hwmon drivers not in the kernel (emc1704,pac1934) or the bootloader. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* layerscape: add multiple-configuration generator for FIT imagesMathew McBride2018-07-301-0/+596
| | | | | | | | | | | | | | | | | This is required for the Traverse LS1043 family, we generate a FIT image that works on all boards across the family. This is done by creating multiple configurations that select the right DTB for the board. The bootloader on these boards is configured to boot like this: bootm $kernel_load#ls1043s bootm $kernel_load#ls1043v This is based on earlier work by Jason Wu for Zynq: https://lists.openwrt.org/pipermail/openwrt-devel/2016-March/040460.html Modified to add FDT load addresses and multiple configurations with DTB. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* layerscape: support ubifs rootfsYangbo Lu2018-02-131-9/+24
| | | | | | | | | Some layerscape devices (ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb) were using ext4 rootfs because there were issues using squashfs. This patch is to drop using ext4 rootfs and use ubifs rootfs instead which is more proper for SPI-NOR flash. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ls1012afrdm device supportYangbo Lu2017-11-101-0/+15
| | | | | | | | The QorIQ FRDM-LS1012A Board is an ultra-low-cost development platform for QorIQ LS1012A Series Network Processors built on ARM Cortex-A53 processor. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 06:20:48 +0000