aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/files/arch
Commit message (Expand)AuthorAgeFilesLines
* bcm6345 fixes from AndyIFlorian Fainelli2009-08-062-3/+7
* fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, ...Florian Fainelli2009-08-061-3/+1
* disable watchdog for bcm6345 until it gets fixedFlorian Fainelli2009-08-061-1/+4
* more bcm6345 fixes and definitions, thanks to AndyIFlorian Fainelli2009-07-313-0/+20
* add experimental support for 2.6.28.10, tested on bcm6338Florian Fainelli2009-07-301-0/+1
* fix typo for the flash start address on bcm6345Florian Fainelli2009-07-271-1/+1
* register GPIO-connected LEDs for known boardsFlorian Fainelli2009-07-181-1/+240
* fix comment only valid for bcm6345Florian Fainelli2009-07-171-1/+1
* add the infrastructure to use a MPI/GPIO connected VoIP DSPFlorian Fainelli2009-07-013-1/+79
* fixes for the bcm6338 clocks, thanks MaximeFlorian Fainelli2009-07-011-2/+6
* a couple of more fixes to get 6345 booting up to the console handoverFlorian Fainelli2009-06-303-2/+16
* shared DMA zone is twice smaller on 6338Florian Fainelli2009-06-281-1/+4
* bcm6338 can support PCI since it has MPIFlorian Fainelli2009-06-271-0/+1
* more fixes for bcm6338, no need not to prevent reads from MPI registers now t...Florian Fainelli2009-06-271-6/+10
* fix the flash address comment and register the flash device again with its pr...Florian Fainelli2009-06-271-3/+7
* fix a stupid typo preventing the board from being detectedFlorian Fainelli2009-06-271-1/+1
* prevent bcm6338 and bcm6345 from crashing very earlyFlorian Fainelli2009-06-271-3/+9
* only register fallback sprom and enable PCI if we actually have support for PCIFlorian Fainelli2009-06-271-2/+4
* more missing register definitions for bcm6338Florian Fainelli2009-06-271-2/+12
* more bcm6338 and bcm6345 related fixesFlorian Fainelli2009-06-261-0/+1
* define bcm6338 SDRAM base register and make sure that the right CPU id will b...Florian Fainelli2009-06-261-1/+2
* add board definitions for the bcm6338wFlorian Fainelli2009-06-261-0/+8
* be SMP safe even with gpiolibFlorian Fainelli2009-06-041-7/+8
* cache gpio values in gpio_setFlorian Fainelli2009-06-041-5/+8
* use the correct number of GPIOs for bcm6358Florian Fainelli2009-06-041-2/+2
* register gpiochip earlier, allowing gpio-based runtime detection to be perfor...Florian Fainelli2009-06-042-2/+5
* register gpiodevFlorian Fainelli2009-04-301-0/+7
* enable all blocks on 6338 and uart clock on 6345Florian Fainelli2009-03-211-1/+5
* add support for bcm6345 SoC, needs testingFlorian Fainelli2009-03-202-2/+34
* fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)Florian Fainelli2009-03-176-15/+101
* add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366Florian Fainelli2009-03-121-0/+23
* do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_...Florian Fainelli2009-03-111-8/+4
* fix typo for the bcm6338 spi IRQ, change platform driver name and make the SP...Florian Fainelli2009-03-082-1/+4
* compile and register SPI controller deviceFlorian Fainelli2009-03-082-0/+3
* make bcm6358 consistend with the other boards namingFlorian Fainelli2009-03-081-1/+1
* fix some SPI register definitions and platform-device registration codeFlorian Fainelli2009-03-081-3/+7
* prepare for SPI controller driverFlorian Fainelli2009-03-062-0/+112
* provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__Florian Fainelli2009-02-271-0/+34
* move the device registration to an earlier initcall level, required for fallb...Florian Fainelli2009-02-271-1/+1
* add support for user9102 boards (#4537)Florian Fainelli2009-01-311-0/+22
* Add board definitions for the Davolink DV201AMRFlorian Fainelli2009-01-291-0/+25
* frequency is in Hz, thanks JoelFlorian Fainelli2009-01-171-1/+1
* allow bcm6338 to get the base address of the memory controller register, requ...Florian Fainelli2009-01-151-0/+1
* add board registration of the bcm96338gwFlorian Fainelli2008-12-191-0/+22
* 6338 has no PCIFlorian Fainelli2008-12-191-1/+0
* add experimental support for bcm6338Florian Fainelli2008-12-192-1/+40
* Register watchdog driverFlorian Fainelli2008-12-192-0/+4
* Add bcm63xx_wdt but do not enable it yetFlorian Fainelli2008-12-172-0/+36
* Add support for Sagem F@ST2404 (#4332)Florian Fainelli2008-12-101-0/+26
* Enable ohci on bcm96348gwFlorian Fainelli2008-12-081-0/+2