aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* hostapd: backport usleep patchRosen Penev2020-04-132-1/+54
| | | | | | Optionally fixes compilation with uClibc-ng. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* wpa_supplicant: disable CONFIG_WRITE functionalityKirill Lukonin2020-04-132-2/+2
| | | | | | | | | CONFIG_WRITE functionality is not used and could be removed. Looks helpful for devices with small flash because wpad is also affected. Little testing shows that about 6 KB could be saved. Signed-off-by: Kirill Lukonin <klukonin@gmail.com>
* mwlwifi: Update the 88W8964's firmware to 9.3.2.12 and fix backports version ↵Jose Olivera2020-04-133-23/+39
| | | | | | | | | | | | | | | | | | | | | | | | detection Updates the 88W8964 firmware used in the Linksys WRT3200ACM and WRT32X [v9.3.2.6 -> v9.3.2.12] Removes 0c43219 ("mwlwifi: Fix loading with backports v5.3") as it has been merged upstream. Unfortunately, there is a bug wherein Kaloz's repo, the version detection mechanism for fixing vendor commands doesn't work. It pulls in the Linux kernel version, which as of this time is "4.14.y" or "4.19.y" However, the proper behaviour is that it should pull in the mac80211 backports version which as of now is "5.4.27" The included patch works around this using a backports define found only on versions >5.3, "VENDOR_CMD_RAW_DATA". Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
* kernel: hwmon: add dme1737 driverLucian Cristian2020-04-131-0/+16
| | | | | | SMSC DME1737, SCH3112, SCH3114, SCH3116, SCH5027 monitoring support Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* cypress-firmware: update to v5.4.18-2020_0402Álvaro Fernández Rojas2020-04-131-3/+21
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* base-files: don't ship local build key when on buildbotDaniel Golle2020-04-121-1/+3
| | | | | | | | | | Including the local build key in /etc/opkg/keys isn't feasible when building on the buildbot: The included key collides with its copy already in openwrt-keyring which breaks the ImageBuilder. Not including a locally generated key also makes the base-files package more reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: preinit: also config switch when no port roles definedChuanhong Guo2020-04-122-7/+8
| | | | | | | | | current preinit code in base-files doesn't config switch when there are no port roles defined. But this kind of configuration exists on single port devices where switch vlan is simply disabled. configure reset and enable_vlan property when a switch node exist. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* dnsmasq: bump to v2.81Kevin Darbyshire-Bryant2020-04-121-3/+3
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* base-files: source functions.sh in /lib/functions/system.shAdrian Schmutzler2020-04-121-0/+1
| | | | | | | | The file /lib/functions/system.sh depends on find_mtd_index() and find_mtd_part() located in /lib/function.sh, so let's source that file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: do not source system.sh in functions.shAdrian Schmutzler2020-04-122-2/+1
| | | | | | | | | | | | | | | | | | The default_postinst() function in /lib/functions.sh sources /lib/functions/system.sh before cycling through uci-defaults files. This creates a pseudo-cyclic dependency as system.sh also uses functions that are located in functions.sh. Despite that, there is actually only one uci-defaults file in the entire repo that needs system.sh, and this one contains an explicit source for system.sh anyway. Consequently, this patch removes the sourcing of system.sh in functions.sh. There are no relevant uses in packages, routing and luci repositories. This may require adjustments for downstream, though. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* broadcom-wl: fix compilation with kernel 5.4Adrian Schmutzler2020-04-121-0/+18
| | | | | | | | | | | | | | This adds two fixes for compilation with kernel 5.4: 1. dev_open from include/linux/netdevice.h needs a second parameter since kernel 5.0: 00f54e68924e ("net: core: dev: Add extack argument to dev_open()") 2. get_ds() macro definition has been dropped since kernel 5.1: 736706bee329 ("get rid of legacy 'get_ds()' function") Since get_ds() has been just a macro before, replace it in the driver instead of creating a version switch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* broadcom-wl: fix compilation with kernel >= 4.15Adrian Schmutzler2020-04-121-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since kernel 4.15, init_timer is not available anymore, and has been replaced by timer_setup. The fixes compilation of wl_linuc.c, which returned the following errors beforehand (line-wrapped manually): .../broadcom-wl-5.10.56.27.3/driver/wl_linux.c: In function 'wl_init_timer': .../broadcom-wl-5.10.56.27.3/driver/wl_linux.c:2576:2: error: implicit declaration of function 'init_timer'; did you mean 'init_timers'? [-Werror=implicit-function-declaration] init_timer(&t->timer); ^~~~~~~~~~ init_timers .../broadcom-wl-5.10.56.27.3/driver/wl_linux.c:2577:10: error: 'struct timer_list' has no member named 'data' t->timer.data = (ulong) t; ^ .../broadcom-wl-5.10.56.27.3/driver/wl_linux.c:2578:20: error: assignment to 'void (*)(struct timer_list *)' from incompatible pointer type 'void (*)(ulong)' {aka 'void (*)(long unsigned int)'} [-Werror=incompatible-pointer-types] t->timer.function = wl_timer; This should fix build of several devices on bcm63xx with testing kernel (4.19). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* iproute2: update to 5.6.0Hans Dedecker2020-04-114-9/+9
| | | | | | Update iproute2 to latest stable 5.6.0; for the changes see https://lwn.net/Articles/816778/ Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipq40xx: add support for Cell C RTL30VWPawel Dembicki2020-04-102-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cell C RTL30VW is a LTE router with tho gigabit ethernets and integrated QMI mPCIE modem. This is stripped version of ASKEY RTL0030VW. Hardware: Specification: -CPU: IPQ4019 -RAM: 256MB -Flash: NAND 128MB + NOR 16MB -WiFi: Integrated bgn/ac -LTE: mPCIe card (Modem chipset MDM9230) -LAN: 2 Gigabit Ports -USB: 2x USB2.0 -Serial console: RJ-45 115200 8n1 -Unsupported VoIP Known issues: None so far. Instruction install: There are two methods: Factory web-gui and serial + tftp. Web-gui: 1. Apply factory image via stock web-gui. Serial + initramfs: 1. Rename OpenWrt initramfs image to "image" 2. Connect serial console (115200,8n1) 3. Set IP to different than 192.168.1.11, but 24 bit mask, eg. 192.168.1.4. 4. U-Boot commands: sf probe && sf read 0x80000000 0x180000 0x10000 setenv serverip 192.168.1.4 set fdt_high 0x85000000 tftpboot 0x84000000 image bootm 0x84000000 5. Install sysupgrade image via "sysupgrade -n" Back to stock: All is needed is swap 0x4c byte in mtd8 from 0 to 1 or 1 to 0, do firstboot and factory reset with OFW: 1. read mtd8: dd if=/dev/mtd8 of=/tmp/mtd8 2. go to tmp: cd /tmp/ 3. write first part of partition: dd if=mtd8 of=mtd8.new bs=1 count=76 4. check which layout uses bootloader: cat /proc/mtd 5a. If first are kernel_1 and rootfs_1 write 0: echo -n -e '\x00' >> mtd8.new 5b. If first are kernel and rootfs write 1: echo -n -e '\x01' >> mtd8.new 6. fill with rest of data: dd if=mtd8 bs=1 skip=77 >> mtd8.new 7. CHECK IF mtd8.new HAVE CHANGED ONLY ONE BYTE! e.g with: hexdump mtd8.new 8. write new mtd8 to flash: mtd write mtd8.new /dev/mtd8 9. do firstboot 10.reboot 11. Do back to factory defaults in OFW GUI. Based on work: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq40xx: add support for MobiPromo CM520-79FDENG Qingfang2020-04-102-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MobiPromo CM520-79F is an AC1300 dual band router based on IPQ4019 Specification: SoC/Wireless: QCA IPQ4019 RAM: 512MiB Flash: 128MiB SLC NAND Ethernet PHY: QCA8075 Ethernet ports: 1x WAN, 2x LAN LEDs: 7 LEDs 2 (USB, CAN) are GPIO other 5 (2.4G, 5G, LAN1, LAN2, WAN) are connected to a shift register Button: Reset Flash instruction: Disassemble the router, connect UART pins like this: GND TX RX [x x . . x .] [. . . . . .] (QCA8075 and IPQ4019 below) Baud-rate: 115200 Set up TFTP server: IP 192.168.1.188/24 Power on the router and interrupt the booting with UART console env backup (in case you want to go back to stock and need it there): printenv (Copy the output to somewhere save) Set bootenv: setenv set_ubi 'set mtdids nand0=nand0; set mtdparts mtdparts=nand0:0x7480000@0xb80000(fs); ubi part fs' setenv bootkernel 'ubi read 0x84000000 kernel; bootm 0x84000000#config@1' setenv cm520_boot 'run set_ubi; run bootkernel' setenv bootcmd 'run cm520_boot' setenv bootargs saveenv Boot initramfs from TFTP: tftpboot openwrt-ipq40xx-generic-mobipromo_cm520-79f-initramfs-fit-zImage.itb bootm After initramfs image is booted, backup rootfs partition in case of reverting to stock image cat /dev/mtd12 > /tmp/mtd12.bin Then fetch it via SCP Upload nand-factory.ubi to /tmp via SCP, then run mtd erase rootfs mtd write /tmp/*nand-factory.ubi rootfs reboot To revert to stock image, restore default bootenv in uboot UART console setenv bootcmd 'bootipq' printenv use the saved dump you did back when you installed OpenWrt to verify that there are no other differences from back in the day. saveenv upload the backed up mtd12.bin and run tftpboot mtd12.bin nand erase 0xb80000 0x7480000 nand write 0x84000000 0xb80000 0x7480000 The BOOTCONFIG may have been configured to boot from alternate partition (rootfs_1) instead In case of this, set it back to rootfs: cd /tmp cat /dev/mtd7 > mtd7.bin echo -ne '\x0b' | dd of=mtd7.bin conv=notrunc bs=1 count=1 seek=4 for i in 28 48 68 108; do dd if=/dev/zero of=mtd7.bin conv=notrunc bs=1 count=1 seek=$i done mtd write mtd7.bin BOOTCONFIG mtd write mtd7.bin BOOTCONFIG1 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [renamed volume to ubi to support autoboot, as per David Lam's test in PR#2432] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kmod-sched: add act_policeKevin Darbyshire-Bryant2020-04-101-0/+10
| | | | | | | | | | | | | | | | | | "Whoop whoop, sound of da police" Add an ingress capable traffic policer module configurable with tc. From the man page: The police action allows to limit bandwidth of traffic matched by the filter it is attached to. Basically there are two different algorithms available to measure the packet rate: The first one uses an internal dual token bucket and is configured using the rate, burst, mtu, peakrate, overhead and linklayer parameters. The second one uses an in-kernel sampling mechanism. It can be fine-tuned using the estimator filter parameter. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* e2fsprogs: Update to 1.45.6Daniel Engberg2020-04-091-2/+2
| | | | | | Update e2fsprogs to 1.45.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* exfat-utils: add exFAT File System utilities packageDaniel Golle2020-04-091-0/+69
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: bump to latest HEADDaniel Golle2020-04-092-4/+7
| | | | | | | | | | | | 2188d81 jail: add support for launching extroot containers 6f3dbd2 jail: add support for userns and cgroupsns 28a06e5 jail: add support for (ram-)overlayfs Add handling for extroot, overlaydir and tmpoverlaysize as well as jail flags for userns and cgroupsns to OpenWrt's shell script to allow their use in init scripts. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: quote 'source' filenames in Config.inEneas U de Queiroz2020-04-093-24/+24
| | | | | | | Newer versions of the kconfig program requires quoting the arguments of the 'source' directive. These are the last ones not using them. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: add @IPV6 dependency to ipv6 modulesEneas U de Queiroz2020-04-092-8/+11
| | | | | | | | | | | | | | IPv6 modules should all depend on @IPV6, to avoid circular dependencies problems, especially if they select a module that depends on IPV6 as well. In theory, if a package A depends on IPV6, any package doing 'select A' (DEPENDS+= A) should also depend on IPV6; otherwise selecting A will fail. Sometimes the build system is forgiving this, but eventually, and unexpectedly, it may blow up on some other commit. Alternatively one can conditionally add IPv6 dependencies only if CONFIG_IPV6 is selected: (DEPENDS+= +IPV6:package6). Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* linux-atm: Include linux/sockios.h for SIOCGSTAMPNorbert van Bolhuis2020-04-091-0/+21
| | | | | | | | | | | | Since linux kernel commit 0768e17073dc527ccd18ed5f96ce85f9985e9115 (2019-04-19) the asm-generic/sockios.h header no longer defines SIOCGSTAMP. Instead it provides only SIOCGSTAMP_OLD. The linux/sockios.h header now defines SIOCGSTAMP using either SIOCGSTAMP_OLD or SIOCGSTAMP_NEW as appropriate. This linux only header file is not included so we get a build failure. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
* base-files: add enabled commands to service rc.commonFlorian Eckert2020-04-082-1/+2
| | | | | | Add missing enbaled command help output. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* packages: mt76: add 14c3:7610 pci id to listPawel Dembicki2020-04-082-1/+31
| | | | | | | | | | This commit add patch with 14c3:7610 pci id addition. It was sent upstream. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [bumped PKG_RELEASE] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iproute2: add kmod-netlink-diag for ssRosen Penev2020-04-071-2/+2
| | | | | | | | | | | | | | | | | Allows proper usage of the ss tool. Otherwise, several errors and bad data gets thrown: Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Originally reported here: https://github.com/openwrt/packages/issues/8232 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kmod: add netlink-diag packageRosen Penev2020-04-071-0/+15
| | | | | | This is used by the ss utility from iproute2. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ppp: update to version 2.4.8.git-2020-03-21Hans Dedecker2020-04-069-137/+10
| | | | | | | | | | | | | | | | | | | Use upstream latest git HEAD as it allows to remove the patches 700-radius-Prevent-buffer-overflow-in-rc_mksid, 701-pppd-Fix-bounds-check-in-EAP-code and 702-pppd-Ignore-received-EAP-messages-when-not-doing-EAP and take in other fixes. 41a7323 pppd: Fixed spelling 'unkown' => 'unknown' (#141) 6b014be pppd: Print version information to stdout instead of stderr (#133) cba2736 pppd: Add RFC1990 (Multilink) to the See Also section of the man page f2f9554 pppd: Add mppe.h to the list of headers to install if MPPE is defined ae54fcf pppd: Obfuscate password argument string 8d45443 pppd: Ignore received EAP messages when not doing EAP 8d7970b pppd: Fix bounds check in EAP code 858976b radius: Prevent buffer overflow in rc_mksid() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: netdev: add missing config for mlx5 driverTan Zien2020-04-061-3/+12
| | | | | | | | | | | The mlk5 kmod lacks all necessary build symbols for kernel 4.14 (again). Add missing symbols to avoid build failure on these targets. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rewrite commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: bump to 2.81rc5Kevin Darbyshire-Bryant2020-04-063-67/+181
| | | | | | | | | | | | | | | | | | | | Bump to 2.81rc5 and re-work ipset-remove-old-kernel-support. More runtime kernel version checking is done in 2.81rc5 in various parts of the code, so expand the ipset patch' scope to inlude those new areas and rename to something a bit more generic.:wq Upstream changes from rc4 532246f Tweak to DNSSEC logging. 8caf3d7 Fix rare problem allocating frec for DNSSEC. d162bee Allow overriding of ubus service name. b43585c Fix nameserver list in auth mode. 3f60ecd Fixed resource leak on ubus_init failure. 0506a5e Handle old kernels that don't do NETLINK_NO_ENOBUFS. e7ee1aa Extend stop-dns-rebind to reject IPv6 LL and ULA addresses. We also reject the loopback address if rebind-localhost-ok is NOT set. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netifd: fix 14_migrate-dhcp-release scriptPeter Stadler2020-04-051-1/+1
| | | | | | prepend 'uci' to 'commit network' Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
* dropbear: backport add ip address to exit without auth messagesKevin Darbyshire-Bryant2020-04-052-1/+120
| | | | | | | 201e359 Handle early exit when addrstring isn't set fa4c464 Improve address logging on early exit messages (#83) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: Move hostapd variants to WirelessAPD menuKevin Darbyshire-Bryant2020-04-051-0/+9
| | | | | | | | | | | It seemed very confusing when trying to select the different variants of hostapd which are somewhat scattered about under the menu 'Network'. Moving all hostapd variants under a common submenu helps avoid confusion. Inspired-by: Kevin Mahoney <kevin.mahoney@zenotec.net> [Fixup badly formatted patch, change menu name] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* umdns: update to the version 2020-04-05Kevin Darbyshire-Bryant2020-04-051-4/+4
| | | | | | | ab7a39a umdns: fix unused error 45c4953 dns: explicitly endian-convert all fields in header and question Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: Fix miss config and module for mlx driverTan Zien2020-04-041-3/+10
| | | | | | | | | Missing config symbols could lead to build failures on kernel 4.14/4.19. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rephrase commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* umdns: suppress address-of-packed-member warningKevin Darbyshire-Bryant2020-04-041-2/+2
| | | | | | | | | | | | | | | | | gcc 8 & 9 appear to be more picky with regards access alignment to packed structures, leading to this warning in dns.c: dns.c:261:2: error: converting a packed ‘struct dns_question’ pointer (alignment 1) to a ‘uint16_t’ {aka ‘short unsigned int’} pointer (alignment 2) may result in an unaligned pointer value [-Werror=address-of-packed-member] 261 | uint16_t *swap = (uint16_t *) q; Work around what I think is a false positive by turning the warning off. Not ideal, but not quite as not ideal as build failure. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* treewide: convert sed -r to posix -EKevin Darbyshire-Bryant2020-04-041-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: add module for Mellanox mlx Network DriverTan Zien2020-04-031-0/+35
| | | | | | | | add module to support Mellanox Connect-X card mlx4 supports ConnectX-3 series and previous cards mlx5 supports Connect-IB/ConnectX-4 series and later cards Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* grub2: fix build when ASLR enabledKevin Darbyshire-Bryant2020-04-021-2/+3
| | | | | | | | | | | | | | Disable ASLR and filter '-fno-plt' from CFLAGS: solves building when ASLR enabled by basically disabling ASLR. Solves errors similar to: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE or module missing GLOBAL_OFFSET_TABLE Suggested-by: 李国 <uxgood.org@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: switch to in-tree cake for 4.19+Kevin Darbyshire-Bryant2020-04-012-3/+17
| | | | | | | | | | | | | | Use in tree version of cake for kernels 4.19+ and backport features from later kernel versions to 4.19. Unfortunately PROVIDES dependency handling produces bogus circular dependency warnings so whilst this package and kmod-sched-cake-oot should be able to PROVIDE kmod-sched-cake this doesn't work. Instead, remove the PROVIDES option and modify package sqm-scripts to depend on the correct module independently. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: rename to kmod-sched-cake-ootKevin Darbyshire-Bryant2020-04-011-6/+7
| | | | | | | | | | | | | In preparation for dropping the out of tree cake module and using in tree cake from upstream, rename the package to kmod-sched-cake-oot (out of tree) Initially add a PROVIDES kmod-sched-cake so that package dependencies can be satisfied. Ultimately this package will be removed when linux 4.14 is removed. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* wireguard: bump to 1.0.20200401Jason A. Donenfeld2020-04-011-2/+2
| | | | | | | Recent backports to 5.5 and 5.4 broke our compat layer. This release is to keep things running with the latest upstream stable kernels. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mac80211: rt2x00: prune more unnecessary exportsDaniel Golle2020-04-015-137/+27
| | | | | | | | | | | | The calibration patches for MT7620 unnecessarily export symbols and populate never accessed function pointers. Remove all that and make functions static as the only place where each of those functions is called is within rt2800lib.c. Also make code more readable by fixing indentation, removing unnecessary parantheses and simplifying some instructions using shorthands here and there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* jansson: convert to cmakeKevin Darbyshire-Bryant2020-04-011-14/+9
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* openssl: bump to 1.1.1fEneas U de Queiroz2020-04-012-83/+3
| | | | | | | | | There were two changes between 1.1.1e and 1.1.1f: - a change in BN prime generation to avoid possible fingerprinting of newly generated RSA modules - the patch reversing EOF detection we had already applied. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* x86: generate EFI platform bootable images李国2020-03-311-8/+54
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* grub2: make some change to add efi platform support李国2020-03-311-23/+51
| | | | | | | | 1.generate boot image at Package/install section 2.move boot image to $(STAGING_DIR_IMAGE)/grub2/ 3.add efi variant to support efi platform Signed-off-by: 李国 <uxgood.org@gmail.com>
* bcm27xx-gpu-fw: update to latest version from RPi foundationÁlvaro Fernández Rojas2020-03-311-22/+15
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wireguard: bump to 1.0.20200330Jason A. Donenfeld2020-03-311-2/+2
| | | | | | | | | | | | | | | | | * queueing: backport skb_reset_redirect change from 5.6 * version: bump This release has only one slight change, to put it closer to the 5.6 codebase, but its main purpose is to bump us to a 1.0.y version number. Now that WireGuard 1.0.0 has been released for Linux 5.6 [1], we can put the same number on the backport compat codebase. When OpenWRT bumps to Linux 5.6, we'll be able to drop this package entirely, which I look forward to seeing. [1] https://lists.zx2c4.com/pipermail/wireguard/2020-March/005206.html Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ath10k-ct: Support AQL on ath10k CT_KVER-5.4Jose Olivera2020-03-301-0/+10
| | | | | | | | | | | | | | | | | Commit ea50780 backported Airtime Queue Limits (AQL) from Linux 5.5 to OpenWrt's backports 5.4. However, this only enabled AQL for the vanilla ath10k driver. This patch also enables it for ath10k-ct. Tested on: * 2xTP-Link Archer A7v5 (QCA9563/QCA988X) * Backports version 5.4-rc8 & 5.4.27 * ath10k-ct and ath10k-ct-htt firmware version 014 to 017 * ath10k-ct driver versions dc025dc to 3d173a4 (CT_KVER-5.4) * WPA2, 802.11krv Tested since January 25, 2020. Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
* hostapd: add abridged flag in disassoc_imminentNick Hainke2020-03-301-0/+5
| | | | | | | | | | | | | If the abridged flag is set to 1 the APs that are listed in the BSS Transition Candidate List are prioritized. If the bit is not set, the APs have the same prioritization as the APs that are not in the list. If you want to steer a client, you should set the flag! The flag can be set by adding {...,'abridged': true,...} to the normal ubus call. Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 12:06:15 +0000