aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* opkg: update to git HEADDaniel Golle2021-03-151-3/+3
| | | | | | 5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* opkg: update to git HEADDaniel Golle2021-03-141-3/+3
| | | | | | d3a63b3 libopkg: add option to strip ABI versions from listed names Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: also install production image to eMMCDaniel Golle2021-03-141-2/+5
| | | | | | | Make installation to eMMC more convenient on the BPi-R64 by also copying the production image (if valid) from SD Card to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: select matching U-Boot for boardDaniel Golle2021-03-141-9/+15
| | | | | | | Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: support new mdio_devres.ko module in 5.10Tony Ambardar2021-03-141-3/+21
| | | | | | | | | Add kmod-mdio-devres package and kernel config symbol, and update related kmod-r8169 and kmod-ixgbe package dependencies. Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* selinux-policy: update to version v0.8Dominick Grift2021-03-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3d7da7a igmpproxy tidy some loose ends c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf 5a18967 adds igmpproxy skeleton 7e6a218 logread: support resolving dns names e39ca8b netifd: add support for /etc/udhcpc.user 7952bd0 odhcp6c: support /etc/odhcp6c.user ba0eb4e swconfig, fwenv, agent 4556b8a pppd cosmetic 9324d9d pppd: sends AT commands to model using /dev/ttyUSBN 417b14a ttydev: add some more ttyUSB ed739dc example: dont depend on policycoreutils 97613f9 dropbear: using dropbear as scp: dns name resolving 12c193b dropbear tcp connect ssh ports for scp c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional 8c5de35 this is a bug 8d5c463 uhttpd rcboot rcdnsmasq 094266e hostapd and wpa_supplicant aef0bd7 mountroot: maintains /tmp/sysupgrade.tar 24f0406 dropbear: allow it to read tmp.fs files 2901433 firstboot mkfsf2fs rcboot 2c4afb7 blockmount mmc 465ca98 adds industrial i/o (iio) nodedev 82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon 7df78bd ubus: "support" older ubusd versions that run as root 4458bce swconfig: allow using terminal (to print output) e8d606d sslcert: openssl linked: this shaves off 200 bytes 93afffb jshn ntpdhotplug 0b847f0 wpad: reads /etc/ssl/openssl.cnf f14ee34 indent fix a0c7cad mtd, uhttpd, ubus and ntpdhotplug d74f98f adds a not about checkreqprot requirement in some scenarios affacce example: add policycoreutils-setfiles for make check 4f944dc kmodloader and fwenv: efe36a3 netifd: adds a comment/reminder 581b087 more fw_printenv loose ends 30177a4 fw_setenv: needs mtd write access to set and delete env da28f4c fw_printenv: some minor clean ups a062053 fw_printenv missing rules 244ba5f blockmount: extroot and /rwm 0745a6a squid: allow squid to run sslcrtd with domain transition b851df6 squid fix 8c55acd squid: adds certfile and allow connect http but... b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid) 5ff39bd squid: forgot about luci 5366c97 squid/rcsquid some basic fill in 8743da6 squid skeleton 687a43b adds squid 3128 port to httpproxy port Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* elfutils: remove host build from target packageTony Ambardar2021-03-131-2/+0
| | | | | | | | | | | | | Commit f4da28c301 ("elfutils: Add host build") supplied a libelf host library to fix a glib2 host build error, but this need was later removed by b6212c8769 ("glib2: don't use libelf during host build"). More importantly, there are already two sources for libelf host libraries: OpenWRT build prerequisites [1] and tools/libelf. A third is not needed. Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* busybox: backport fixes for 1.33.0Hannu Nyman2021-03-133-1/+67
| | | | | | | | Backport two fixes for 1.33.0 * history file storing * traceroute command option parsing Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uboot-mediatek: import fix for AHCI and enable SATADaniel Golle2021-03-132-2/+26
| | | | | | | | Import patch form Frank Wunderlich <frank-w@public-files.de> to fix build of MediaTek AHCI SATA driver. Enable that driver on Bananapi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* xfrm: simplify the check for necessary kernel supportAlin Nastac2021-03-132-2/+2
| | | | | | | [ -d /sys/module/xfrm_interface ] is enough to check if CONFIG_XFRM_INTERFACE support was enabled in kernel. Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
* vti: use alternative way to check if kernel support is enabledAlin Nastac2021-03-132-3/+3
| | | | | | | When necessary support is built in kernel, vti protocol support is not enabled in netifd. Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
* gre: use alternative way to check if kernel support is enabledAlin Nastac2021-03-132-5/+3
| | | | | | | When necessary support is built in kernel, gre protocol support is not enabled in netifd. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* uboot-mediatek: fix build on Mac OS XDaniel Golle2021-03-131-0/+10
| | | | | | | Copy patch added to uboot-sunxi by commit 3cc57ba462 ("uboot-sunxi: add missing type __u64") also to uboot-mediatek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update configs for MT7622 deviesDaniel Golle2021-03-122-4/+48
| | | | | | | * make sure USB 2.0 works (useful for UEFI-booting eg. memtest86) * include more useful U-Boot config options on BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to 2021.04-rc3 with MediaTek's patchesDaniel Golle2021-03-1139-8847/+5711
| | | | | | | | | | | | | | MediaTek published their current U-Boot patchset on github: https://github.com/mtk-openwrt/u-boot/commits/mtksoc Import the platform patches from there (`00-mtk-*.patch`), arrange, them nicely, drop no longer needed local patches and rebase on top of U-Boot 2021.04-rc3. Tested and works well on Linksys E8450 (snand-1ddr) as well as Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to 2021-03-10Daniel Golle2021-03-111-4/+8
| | | | | | | | Most prominently this adds changes which allow replacing the binary- only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit). This fixes build on non-Linux and/or non-x86 platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* tools: mkimage: add patches for 64-bit MediaTek BootROMDaniel Golle2021-03-111-17/+0
| | | | | | | Add patches for mkimage to allow using it instead of the binary-only 'bromimage' tool to generate bl2 for MT7622. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rpcd: update to git HEADDaniel Golle2021-03-111-3/+3
| | | | | | | d3f2041 uci: manually clear uci_ptr flags after uci_delete() operations ccb7517 sys: packagelist: drop ABI version from package name Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* opkg: update to git HEADDaniel Golle2021-03-111-3/+3
| | | | | | d71856a pkg: pass-through ABIVersion to status file Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: add a udhcpc.user placeholder scriptRui Salvaterra2021-03-102-1/+6
| | | | | | | | Document the existence of this feature. This allows the user to execute a script at each DHCPv4 event. This is useful, for example, as an ad-hoc way to update a DDNS entry when (and only when) required. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* odhcp6c: add a odhcp6c.user placeholder scriptRui Salvaterra2021-03-102-1/+8
| | | | | | | | Document the existence of this feature. This allows the user to execute a script at each DHCPv6 event. This is useful, for example, as an ad-hoc way to update a DDNS entry when (and only when) required. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NANDDaniel Golle2021-03-081-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* checkpolicy: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 42ae834a libsepol,checkpolicy: optimize storage of filename transitions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* secilc: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | | | | | | | 49ff851c secilc: fixes cil_role_statements.md example 03881703 secilc/docs: add custom color theme 4c8d6094 secilc/docs: add syntax highlighting for secil 057d72af secilc/docs: use fenced code blocks for cil examples e8bcdb84 cil_network_labeling_statements: fixes nodecon examples eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes 9e9b8103 secilc/docs: document expandtypeattribute fbe1e526 Update the cil docs to match the current behaviour. Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* policycoreutils: update to version 3.2Dominick Grift2021-03-081-8/+8
| | | | | | | | | | | | | | d464187c policycoreutils: sestatus belongs to bin not sbin d59932a7 policycoreutils: Resolve path in restorecon_xattr 5682c0d5 policycoreutils/fixfiles.8: add missing file systems and merge check and verify 57dd1f65 policycoreutils/setfiles: Drop unused nerr variable be7f54cb setfiles: drop ABORT_ON_ERRORS and related code 9207823c setfiles: Do not abort on labeling error c064d214 selinux_config(5): add a note that runtime disable is deprecated 8bc865e1 newrole: support cross-compilation with PAM and audit ba2d6c10 fixfiles: correctly restore context of mountpoints Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsemanage: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | | | | | | c35919a7 libsemanage: sync filesystem with sandbox 5b05e829 Revert "libsemanage/genhomedircon: check usepasswd" edae9275 libsemanage: Free contents of modkey in semanage_direct_remove ce46daab libsemanage/genhomedircon: check usepasswd 6ebb35d2 libsemanage: Bump libsemanage.so version c08b73d7 libsemanage: Drop deprecated functions b46406de libsemanage: Remove legacy and duplicate symbols Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libselinux: update to version 3.2Dominick Grift2021-03-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 142826a3 libselinux: fix segfault in add_xattr_entry() 398d2cee libselinux: rename gettid() to something which never conflicts with the libc 8f0f0a28 selinux(8,5): Describe fcontext regular expressions 9cc6b5cf libselinux/getconlist: report failures 156dd0de libselinux: update getseuser e2dca5df libselinux: accept const fromcon in get_context API da4829d0 libselinux: Always close status page fd 45b15c22 selinux(8): explain that runtime disable is deprecated 3c16aaef selinux(8): mark up SELINUX values c2a58cc5 libselinux: LABEL_BACKEND_ANDROID add option to enable db0f2f38 libselinux: Add build option to disable X11 backend 4a142ac4 libsepol: Bump libsepol.so version d23342a9 libselinux: convert matchpathcon to selabel_lookup() 7ef5b185 libselinux: Change userspace AVC setenforce and policy load messages to audit format. f5d644c7 libselinux: Add additional log callback details in man page for auditing. 075f9cfe libselinux: Fix selabel_lookup() for the root dir. a4149e0e libselinux: Add new log callback levels for enforcing and policy load notices. a63f93d8 libselinux: initialize last_policyload in selinux_status_open() ef902db9 libselinux: safely access shared memory in selinux_status_updated() 9e4480b9 libselinux: Remove trailing slash on selabel_file lookups. 21fb5f20 libselinux: use full argument specifiers for security_check_context in man page e7abd802 libselinux: fix build order 05bdc031 libselinux: use kernel status page by default Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsepol: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a9e0004f libsepol: invalidate the pointer to the policydb if policydb_init fails 6238e025 libsepol/cil: fix NULL pointer dereference in cil_fill_ipaddr b69d77bc libsepol/cil: handle SID without assigned context when writing policy.conf 0861c659 libsepol: Validate policydb values when reading binary policy 8f5409cf libsepol: Create function ebitmap_highest_set_bit() 0451adeb libsepol/cil: Destroy disabled optional blocks after pass is complete 32f8ed3d libsepol/cil: introduce intermediate cast to silence -Wvoid-pointer-to-enum-cast 4662bdc1 libsepol/cil: be more robust when encountering <src_info> 6b561058 libsepol/cil: fix NULL pointer dereference with empty macro argument 0d0e47c7 libsepol/cil: Fix integer overflow in the handling of hll line marks 1b36ace2 libsepol: include header files in source files when matching declarations 1f1fa9d4 libsepol: uniformize prototypes of sepol_mls_contains and sepol_mls_check 72a88d75 libsepol: remove unused files eba0ffee libsepol/cil: Fix heap-use-after-free when using optional blockinherit 1048f8d3 libsepol/cil: unlink blockinherit->block link when destroying a block b3202918 libsepol/cil: fix memory leak when a constraint expression is too deep f0d98f83 libsepol/cil: Fix heap-use-after-free in __class_reset_perm_values() 5d021d66 libsepol/cil: Update symtab nprim field when adding or removing datums 34bd9a9d libsepol: destroy filename_trans list properly bdf4e332 libsepol/cil: fix NULL pointer dereference when parsing an improper integer b7ea65f5 libsepol/cil: destroy perm_datums when __cil_resolve_perms fails 228c06d9 libsepol/cil: fix out-of-bound read in cil_print_recursive_blockinherit a25d9104 libsepol/cil: constify some strings e2d01842 libsepol/cil: propagate failure of cil_fill_list() 6c8fca10 libsepol/cil: do not add a stack variable to a list 38a09b74 libsepol/cil: fix NULL pointer dereference when using an unused alias 3c357285 libsepol/cil: remove useless print statement 90809674 libsepol/cil: always destroy the lexer state d16a1e46 libsepol/cil: Use the macro FLAVOR() whenever possible 2aac859a libsepol/cil: Use the macro NODE() whenever possible d317b470 libsepol/cil: Remove unnecessary assignment in cil_resolve_name_keep_aliases() 9b9761cf libsepol/cil: Remove unused field from struct cil_args_resolve e257d4c7 libsepol/cil: Get rid of unnecessary check in cil_gen_node() ebba2b00 libsepol/cil: cil_tree_walk() helpers should use CIL_TREE_SKIP_* 89dab467 libsepol: free memory when realloc() fails 2d353bd5 libsepol/cil: Give error for more than one true or false block 4a142ac4 libsepol: Bump libsepol.so version 506c7b95 libsepol: Drop deprecated functions ae58e84b libsepol: Get rid of the old and duplicated symbols c97d63c6 libsepol: silence potential NULL pointer dereference warning 64387cb3 libsepol: drop confusing BUG_ON macro 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 a152653b libsepol/cil: Fix neverallow checking involving classmaps 734e4beb libsepol/cil: Validate conditional expressions before adding to binary policy 685f577a libsepol/cil: Validate constraint expressions before adding to binary policy 8206b8cb libsepol: implement POLICYDB_VERSION_COMP_FTRANS 42ae834a libsepol,checkpolicy: optimize storage of filename transitions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* procd: update to git HEADDaniel Golle2021-03-081-3/+3
| | | | | | | 945d0d7 utils: fix C style in header file 2cfc26f inittab: detect active console from kernel if no console= specified Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bpftools: fix param order for install on macOSGeorgi Valkov2021-03-071-0/+11
| | | | | | | Fix: bpftools 5.11.2 does not compile on macOS, because the -m option was placed between src and dst. Corrected by moving -m 644 before src. Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
* bpftools: fix libbpf pkgconfig fileTony Ambardar2021-03-071-0/+4
| | | | | | | | | | | | | | | | | | | | | The pkgconfig file hardcodes a host library directory which cannot be overridden by OpenWrt during builds. Use SED to fix this and potential include directory problems, as is done with several other packages. This fixes a strange issue intermittently seen building iproute2 on the oxnas target: iptables modules directory: /usr/lib/iptables libc has setns: yes SELinux support: no libbpf support: no libbpf version 0.3.0 is too low, please update it to at least 0.1.0 LIBBPF_FORCE=on set, but couldn't find a usable libbpf Fixes: 2f0d672088c3 ("bpftools: add utility and library packages supporting eBPF usage") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* treewide: make AddDepends/usb-serial selectiveAdrian Schmutzler2021-03-061-1/+1
| | | | | | | Make packages depending on usb-serial selective, so we do not have to add kmod-usb-serial manually for every device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-062-2/+1
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: fix kmod-usb3 on platforms without PCIDaniel Golle2021-03-061-3/+6
| | | | | | | | | | | | | Partially restore the wild-card matching for kmod-usb3 modules to fix build on platforms without PCI which otherwise file, as seen on buildbot: ERROR: module '[...]/linux-5.4.102/drivers/usb/host/xhci-pci.ko' is missing. modules/usb.mk:1675: recipe for target '[...]/kmod-usb3_5.4.102-1_mips_mips32.ipk' failed Fixes: 7bda2e9aba ("kernel: fix kmod-usb3 dependencies") Fixes: be23f9818a ("apm821xx: add support for kernel 5.10") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: prune now uneeded declarationsDaniel Golle2021-03-061-7/+0
| | | | | | | Remove unneeded delcarations form package Makefile now that everything comes from github.com/mtk-openwrt upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix kmod-usb3 dependenciesIlya Lipnitskiy2021-03-061-20/+62
| | | | | | | | | | | | | | | | | | Adding CONFIG_USB_XHCI_PCI_RENESAS to KCONFIG made it so it was set for all targets that included kmod-usb3, not just the intended apm821xx/nand. xhci-pci has a dependency on xhci-pci-renesas if CONFIG_USB_XHCI_PCI_RENESAS is set, breaking kmod-usb3 builds on Linux 5.10 on all other targets. Rework the dependencies by breaking out xhci-hcd, xhci-mtk, and xhci-pci-renesas into new hidden kernel modules and setting kmod-usb3 dependencies properly. Tested by building mt7621 and apm821xx/nand with kmod-usb3 on Linux 5.10 Fixes: be23f981 ("apm821xx: add support for kernel 5.10") Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* arm-trusted-firmware-mediatek: don't select DDR3_FLYBY for 1ddrDaniel Golle2021-03-051-10/+6
| | | | | | | DDR3_FLYBY has accidentally been set also for the 1-chip variant which lead to broken, unbootable images. Fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* apm821xx: add support for kernel 5.10 for testingChristian Lamparter2021-03-051-0/+6
| | | | | | | | | | | | This patch copies over refreshed patches from 5.4. - dropped crypto patches (they got upstreamed) - dropped renesas USB 3 firmware loader (they got upstreamed) - NAND now needs extra device-properties for ECC settings. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-mediatek: improve BPi-R64 supportDaniel Golle2021-03-052-6/+14
| | | | | | | | * allow MAC address from U-Boot env to be inhertied * allow eMMC installation to succeed also without recovery present on the SD Card. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to ATF 2.4 (2021-02-25)Daniel Golle2021-03-053-61/+30
| | | | | | | | | | | | | | | | | | | | All necessary blobs are now contained in the upstream repository, no more wild replacing of blobs needed. This new version also contains new storage drivers for (SPI-)NAND which already comes with support for FM35Q1GA, so that patch can be dropped as well. Tested on: * Bananapi BPi-R64 - sdmmc-2ddr - emmc-2ddr * Linksys E8450 - snand-1ddr All works fine (booting Bananapi BPi-R64 from SD Card does NOT require a signed image, so patch arm-trusted-firmware-mediatek to allow doing that). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-03-051-3/+3
| | | | | | d035016 tp-link: rename to tplink to match DT vendor prefix Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel/modules: fix CDC NCM dependenciesRui Salvaterra2021-03-051-1/+1
| | | | | | CDC NCM support only depends on CDC Ethernet with Linux 5.10. Fix thusly. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* rssileds: use new application led trigger backendFlorian Eckert2021-03-052-0/+5
| | | | | | | | | | | | | | | | | This will use the new application led trigger backend. For now this is the only package that uses leds trigger in user space to configure the kernel led triggers. The callback script only emmits a message for now, so that this LED is now managed by the rssileds service. Until now a generic warning was emitted that this LED trigger is not supported. But that is not true. -> Skipping trigger 'rssileds' for led '<name>' due to missing kernel module I think this callback should be changed in the future to restart the service. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: add new application led trigger backendFlorian Eckert2021-03-051-4/+5
| | | | | | | | | | | | | | | | | For now we have only kernel LED trigger support. With this change it is now possible to use application triggers. If we configure a LED with a non kernel trigger, then we check on every restart and boot of the LED service if we have this trigger as an application in "/usr/libexec/led-trigger". If this file with the name is found, then we execute this to init the LED. Possible use cases are: - Start/Stop/Restart an application led trigger service for this led - Init a LED that is configured by a hotplug script (VPN tunnel established) Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-03-051-3/+3
| | | | | | | 3fb6f1c tp-link: c2300-v1: add cferam file 79f9578 sercomm: vox-2.5: add cferam file Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* fstools: fix build with glibcDaniel Golle2021-03-051-3/+3
| | | | | | | | stropts.h is unavailable under glibc (and unneeded when building against glibc). Include it only if not building against glibc. Reported-by: @DazzyWalkman Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: don't try to install absent filesDaniel Golle2021-03-041-6/+0
| | | | | | | | Don't try to install files which no longer exist Since {e,sd}mmc are now produced by ptgen they have been removed. Fixes: 5a3562cd1d ("arm-trusted-firmware-mediatek: remove {e,sd}mmc headers") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: remove {e,sd}mmc headersDaniel Golle2021-03-031-20/+0
| | | | | | | | Turned out those are simply MBR with active boot partition. And not needed at all on emmc. Remove them as ptgen can now generate hybrid MBR sufficient to boot MT7622 from SD Card. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2021-03-021-3/+3
| | | | | | 19d7d93 libfstools: partname: several fixes Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-27 13:53:00 +0000