openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	kernel: remove kernel module checks/dependencies for 3.14	Felix Fietkau	2015-04-11	1	-1/+0
*	kernel: drop obsolete linux 3.10 related dependencies/checks	Felix Fietkau	2015-04-10	1	-1/+1
*	kernel: add crc16 as boot module, it is required by ext4	Felix Fietkau	2015-03-29	1	-1/+1
*	kernel: remove obsolete kernel version dependencies	Felix Fietkau	2015-03-19	1	-1/+1
*	modules: add lz4 compression support	John Crispin	2015-01-28	1	-0/+20
*	kernel: fix dependency to xor-neon.ko	Hauke Mehrtens	2014-05-02	1	-0/+7
*	kernel: dont rely on library modules to be depended on	John Crispin	2013-10-08	1	-0/+11
*	kernel: lib-textsearch needs to be auto probed for amanda nat to work	John Crispin	2013-09-30	1	-0/+1
*	kernel: make most modules use AutoProbe	John Crispin	2013-09-17	1	-12/+0
*	kernel: be consistent with formatting style	Luka Perkov	2013-07-26	1	-2/+2
*	kernel: move xor into its own package	Jonas Gorski	2013-07-18	1	-0/+16
*	kernel: split out lib-raid6	Jonas Gorski	2013-07-18	1	-0/+16
*	packages: clean up the package folder	John Crispin	2013-06-21	1	-0/+165

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar9344.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "ubnt,aircube-ac", "qca,ar9342"; model = "Ubiquiti airCube AC"; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x050000 0xf60000>; }; partition@fb0000 { label = "cfg"; reg = <0xfb0000 0x040000>; read-only; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; }; }; }; }; &ref { clock-frequency = <40000000>; }; &uart { status = "okay"; }; &pcie { status = "okay"; }; &mdio0 { status = "okay"; phy-mask = <4>; phy0: ethernet-phy@0 { phy-mode = "rgmii"; reg = <0>; qca,ar8327-initvals = < 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ 0x7c 0x0000007e /* PORT0_STATUS */ >; }; }; &eth0 { status = "okay"; /* default for ar934x, except for 1000M and 10M */ pll-data = <0x06000000 0x00000101 0x00001313>; mtd-mac-address = <&art 0x0>; phy-mode = "rgmii"; phy-handle = <&phy0>; gmac-config { device = <&gmac>; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };