index : openwrt/upstream	attitude_adjustment barrier_breaker chaos_calmer lede-17.01 less-old-master master old-master openwrt-18.06 openwrt-19.07 upstream
	upstream openwrt	James

aboutsummaryrefslogtreecommitdiffstats

log msg author committer range

path: root/package/kernel/button-hotplug/src

	Commit message (Expand)	Author	Age	Files	Lines
*	button-hotplug: remove #ifdef CONFIG_HOTPLUG, it is gone in newer kernels	Felix Fietkau	2014-05-23	1	-7/+0
*	gpio-button-hotplug: add wwan button	Hauke Mehrtens	2014-01-14	1	-2/+1
*	button-hotplug: sync list of supported keys with gpio-button-hotplug	John Crispin	2013-11-07	1	-0/+1
*	button-hotplug: Add KEY_POWER handling	John Crispin	2013-07-04	1	-0/+1
*	packages: clean up the package folder	John Crispin	2013-06-21	3	-0/+352

generated by cgit v1.2.3 (git 2.25.1) at 2026-01-20 17:38:20 +0000

/dts-v1/;

/include/ "ar9.dtsi"

/ {
	model = "WBMR - Buffalo WBMR-HP-G300H";

	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";

		leds {
			boot = &power_green;
			failsafe = &power_red;
			running = &power_green;

			dsl = &dsl;
			internet = &online_green;
			usb = &usb;
			wifi = &wifi;
		};
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};

	fpi@10000000 {
		localbus@0 {
			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x2000000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					partition@0 {
						label = "uboot";
						reg = <0x00000 0x40000>;
						read-only;
					};

					partition@40000 {
						label = "uboot_env";
						reg = <0x40000 0x20000>;
						read-only;
					};

					partition@20000 {
						label = "firmware";
						reg = <0x60000 0x1f20000>;
					};

					partition@0x1fc0000 {
						label = "board";
						reg = <0x1fc0000 0x20000>;
						read-only;
					};

					partition@0x1fe0000 {
						label = "calibration";
						reg = <0x1fe0000 0x20000>;
						read-only;
					};
				};
			};

			mac_addr {
				compatible = "lantiq,eth-mac";
				reg = <0 0x1fd0024 0x6>;
			};
		};

		gpio: pinmux@E100B10 {
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			state_default: pinmux {
				pci-in {
					lantiq,groups = "req1";
					lantiq,output = <0>;
					lantiq,open-drain = <1>;
					lantiq,pull = <2>;
				};
				pci-out {
					lantiq,groups = "gnt1";
					lantiq,output = <1>;
					lantiq,pull = <0>;
				};
				pci_rst {
					lantiq,pins = "io21";
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
			};
		};

		etop@E180000 {
			phy-mode = "rgmii";
		};

		ifxhcd@E101000 {
			status = "okay";
			gpios = <&gpio 36 0>;
		};

		pci@E105400 {
			status = "okay";
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		wps {
			label = "wps";
			gpios = <&gpio 0 1>;
			linux,code = <0x211>;
		};
		reset {
			label = "reset";
			gpios = <&gpio 37 1>;
			linux,code = <0x198>;
		};
		eject {
			label = "eject";
			gpios = <&gpio 34 1>;
			linux,code = <0xf7>;
		};
		movie {
			label = "movie";
			gpios = <&gpio 22 1>;
			linux,code = <0x109>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		power_green: power {
			label = "wbmr:green:power";
			gpios = <&gpio 1 1>;
			default-state = "keep";
		};
		power_red: power2 {
			label = "wbmr:red:power";
			gpios = <&gpio 5 1>;
		};
		security {
			label = "wbmr:yellow:security";
			gpios = <&gpio 14 1>;
		};
		wifi: wifi {
			label = "wbmr:green:wireless";
			gpios = <&gpio 15 1>;
		};
		dsl: dsl {
			label = "wbmr:green:dsl";
			gpios = <&gpio 16 1>;
		};
		online_green: online {
			label = "wbmr:green:internet";
			gpios = <&gpio 17 1>;
		};
		online2 {
			label = "wbmr:red:internet";
			gpios = <&gpio 18 1>;
		};
		movie {
			label = "wbmr:blue:movie";
			gpios = <&gpio 20 1>;
		};
		usb: usb {
			label = "wbmr:green:usb";
			gpios = <&gpio 28 1>;
			default-state = "on";
		};
	};
};