aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mxs: drop 4.4 supportMichael Heimpold2017-06-276-1231/+0
| | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mxs: add support for 4.9 and switch overMichael Heimpold2017-06-273-1/+348
| | | | | | | | | | | | | | | | | | | | I did not port the regulator and power patches from Stefan Wahren because I talked to him and he told me that work on this is currently stalled. And since AFAIK nothing depends on these patches, leaving them out seems reasonable. I build minimum default configurations and run-tested them on both I2SE Duckbill devices and Olimex Olinuxino Maxi boards successfully [1]. [1] Tested: - debug uart is working - boot without any obvious kernel problem - network is coming up and data transfer is possible - Olinuxino: USB detects a plugged-in pen drive Signed-off-by: Michael Heimpold <mhei@heimpold.de> [refreshed config and patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: disable various symbols for v4.9Michael Heimpold2017-06-271-0/+4
| | | | | | | In preparation for bumping mxs target to 4.9, disable a bunch of configuration symbols that provoked config prompts. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* ath10k-firmware: add qca9888 firmwareJohn Crispin2017-06-271-0/+19
| | | | | | | | | ath10k-firmware: add qca9888 firmware the firmware files for qca9888 were previously not packaged. add the meta information for doing so. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: update kernel 4.4 to 4.4.74Stijn Tintel2017-06-2722-54/+54
| | | | | | | | Refresh patches. Compile-tested on ar71xx. Runtime-tested on ar71xx. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.9 to 4.9.34Koen Vandeputte2017-06-2722-42/+42
| | | | | | | | | | | | - Refreshed all patches - Adapted 1 (0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch) Compile tested on: brcm2708, cns3xxx, imx6 Run tested on: brcm2708, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [Compile and run tested on brcm2708] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: use .patch extension for all patchesStijn Tintel2017-06-272-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* firmware-utils: fix dgn3500sum compiler warningsMathias Kresin2017-06-262-4/+3
| | | | | | | | | | | The sum variable need to be initialised, otherwise it will points to random stack memory and a bogus image checksum might be calculated. While at it, fix the segfault in case the product region code isn't specified and enable compiler warnings which had revealed all the code issues. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: backport tweak ICMP ping logic for DHCPv4Hans Dedecker2017-06-262-1/+26
| | | | | | | | | | Don't start ping-check of address in DHCP discover if there already exists a lease for the address. It has been reported under some circumstances android and netbooted windows devices can reply to ICMP pings if they have a lease and thus block the allocation of the IP address the device already has during boot. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: support term_timeout parameterJo-Philipp Wich2017-06-262-2/+2
| | | | | | | | | Expose "term_timeout" parameter in procd.sh to allow init scripts to request a longer termination timeout. This is required to fix FS#859 in a later commit. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: assign /dev/tty* nodes to "tty" groupJo-Philipp Wich2017-06-262-1/+5
| | | | | | | | Adjust default permissions and ownership of /dev/tty* nodes from 0600/root:root to 0660/root:tty in order to support granting unprivileged user access when needed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: add "tty" user groupJo-Philipp Wich2017-06-261-0/+1
| | | | | | | | This is needed for an upcoming change to the hotplug default rules which will cause /dev/tty* nodes to get assigned to the "tty" group in order to support unprivileged user access when needed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* openvpn: update to 2.4.3Magnus Kroken2017-06-265-13/+14
| | | | | | | | | | | | | | | | | | | | Fixes for security and other issues. See security announcement for more details: https://community.openvpn.net/openvpn/wiki/VulnerabilitiesFixedInOpenVPN243 * Remotely-triggerable ASSERT() on malformed IPv6 packet (CVE-2017-7508) * Pre-authentication remote crash/information disclosure for clients (CVE-2017-7520) * Potential double-free in --x509-alt-username (CVE-2017-7521) * Remote-triggerable memory leaks (CVE-2017-7512) * Post-authentication remote DoS when using the --x509-track option (CVE-2017-7522) * Null-pointer dereference in establish_http_proxy_passthru() * Restrict --x509-alt-username extension types * Fix potential 1-byte overread in TCP option parsing * Fix mbedtls fingerprint calculation * openssl: fix overflow check for long --tls-cipher option * Ensure option array p[] is always NULL-terminated * Pass correct buffer size to GetModuleFileNameW() (Quarkslabs finding 5.6) Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* mbedtls: update to 2.5.1Magnus Kroken2017-06-262-27/+27
| | | | | | | | | | | | | | | Fixes some security issues (no remote exploits), and introduces some changes. See release notes for details: https://tls.mbed.org/tech-updates/releases/mbedtls-2.5.1-2.1.8-and-1.3.20-released * Fixes an unlimited overread of heap-based buffers in mbedtls_ssl_read() * Adds exponent blinding to RSA private operations * Wipes stack buffers in RSA private key operations (rsa_rsaes_pkcs1_v15_decrypt(), rsa_rsaes_oaep_decrypt()) * Removes SHA-1 and RIPEMD-160 from the default hash algorithms for certificate verification. * Fixes offset in FALLBACK_SCSV parsing that caused TLS server to fail to detect it sometimes. * Tighten parsing of RSA PKCS#1 v1.5 signatures, to avoid a potential Bleichenbacher/BERserk-style attack. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ar71xx/images/senao: fix reproducible issue using tarAlexander Couzens2017-06-251-0/+1
| | | | | | | | Use deterministic sorting Use numeric owner/group Set uid/gid to 0 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx/image: make tar calls reproducibleAlexander Couzens2017-06-252-3/+11
| | | | | | | | Use --mtime when SOURCE_DATE_EPOCH is set. Use gzip -n9z instead of tar z to remove timestamp in gzip header. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* apm821xx: MR24: fix ethernet phy detection on the MR24Christian Lamparter2017-06-243-5/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | To mitigate this problem, the original message has been wrapped automatically by the mailing list software. This patch fixes a problem where the AR8035 PHY can't be detected on the Cisco Meraki MR24, when the ethernet cable is not connected during boot. Russell Senior reported: |This appears to be a problem during probing of the AR8035 |phy chip. When ethernet has no link, the phy detection fails, |and eth0 is not created. Plugging ethernet later has no effect, |because there is no interface as far as the kernel is |concerned. The relevant part of the boot log looks like this: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! (<https://bugs.lede-project.org/index.php?do=details&task_id=687>) Fixes FS#687 Cc: Chris Blake <chrisrblake93@gmail.com> Reported-by: Russell Senior <russell@personaltelco.net> Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* treewide: add license tagsFlorian Eckert2017-06-2410-0/+16
| | | | | | Add licence tags where missing. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ramips: add MT7603E driver to AFoundry EW1200Mathias Kresin2017-06-241-1/+1
| | | | | | Add the MT7603E driver for the 2.4GHz wireless. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: add AVM FRITZ!WLAN Repeater 300E supportMathias Kresin2017-06-2415-0/+215
| | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: add AR724x PCIe init fixesMathias Kresin2017-06-248-33/+175
| | | | | | | | | | | | Add upstream send AR724x PCIe patches to get the PCIe controller out of reset during driver init. The AVM Fritz 300E bootloader doesn't take care of releasing the different PCIe controller related resets which causes an endless hang as soon as either the PCIE Reset register (0x180f0018) or the PCI Application Control register (0x180f0000) is read from. Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: move lzma2eva build step to image-commands.mkMathias Kresin2017-06-242-3/+9
| | | | | | | Move it to image-commands.mk so that it can used by other targets with eva based boards as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: move Lantiq PEF7061/7071/7072 phy driver to genericMathias Kresin2017-06-2415-19/+19
| | | | | | | | | The driver is used for boards outside the lantiq target as well. Move it to generic to make it available for more targets. The phy driver is included in kernel 4.8 as INTEL_XWAY_PHY. Signed-off-by: Mathias Kresin <dev@kresin.me>
* fritz_tffs_read: get tffs size from input fileMathias Kresin2017-06-241-3/+7
| | | | | | | | | | Use the size of the input file as maximum tffs size instead of a fixed value. The tffs on a AVM Fritz 300E can be up to 512KByte for example. Fixes a read error for the AVM Fritz 3370 where the tffs partition size is 64Kbyte and smaller than the former default value of 256KByte. Signed-off-by: Mathias Kresin <dev@kresin.me>
* libreadline: add host-buildDaniel Golle2017-06-242-0/+2
| | | | | | Also make sure that the PKG_NAME and folder name are equal. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* valgrind: bump to 3.13.0Luiz Angelo Daros de Luca2017-06-243-49/+4
| | | | Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* ca-certificates: Update to version 20161130+nmu1Christian Schoenebeck2017-06-241-3/+3
| | | | Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* busybox: ash/hush fix for read-builtin commandBastian Bittorf2017-06-241-0/+147
| | | | | | | | | | | this is a cherrypick from busybox-git HEAD: f5470419404d643070db99d058405b714695b817 and can be removed when upgrading to next busybox release. discussion here: http://lists.busybox.net/pipermail/busybox/2017-May/085439.html Signed-off-by: Bastian Bittorf <bb@npl.de>
* gcc: gcc 6.3.0 fix comparison between pointer and integerKevin Darbyshire-Bryant2017-06-241-0/+11
| | | | | | | | | | | | | | | | | Fix FS#832 /source/build_dir/toolchain-mips_74kc_gcc-6.3.0_musl/gcc-6.3.0/gcc/ubsan.c: In function 'bool ubsan_use_new_style_p(location_t)': /source/build_dir/toolchain-mips_74kc_gcc-6.3.0_musl/gcc-6.3.0/gcc/ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and integer [-fpermissive] || xloc.file == '\0' || xloc.file[0] == '\xff' ^~~~ make[5]: *** [Makefile:1085: ubsan.o] Error 1 https://www.viva64.com/en/b/0425/#ID0EMGCI Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* hostapd: add support for acs_chan_bias optionKevin Darbyshire-Bryant2017-06-242-2/+6
| | | | | | | | | | During auto channel selection we may wish to prefer certain channels over others. e.g. we can just squeeze 4 channels into europe so '1:0.8 5:0.8 9:0.8 13:0.8' does that. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* busybox: backport 'ip rule suppress_{prefixlength, ifgroup}'Stefan Tomanek2017-06-241-0/+145
| | | | | | | | This is a backport from the busybox repository (192dce4b84fb32346ebc5194de7daa5da3b8d1b4); it enables the use of the suppress_{prefixlength,ifgroup} flags for policy routing rules. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
* procd: update to latest versionHans Dedecker2017-06-231-3/+3
| | | | | | e5e99c4 watchdog: add support for starting/stopping kernel watchdog Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: backport MTD patch extracing TRX code to separated parserRafał Miłecki2017-06-236-60/+362
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport upstream mtd support for partition parsersRafał Miłecki2017-06-239-23/+229
| | | | | | | In a log term it should replace our implementation. For now both can coexist. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport upstream mtdpart.c cleanupsRafał Miłecki2017-06-2315-54/+1094
| | | | | | | | Except for renames and line changes the only conflict was in allocate_partition in handling MTD_WRITEABLE. Hopefully it was handled correctly. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: don't switch allocate_partition to use mtd_roundup_to_ebRafał Miłecki2017-06-232-21/+3
| | | | | | | | | | | | | | | | | This mtd_roundup_to_eb helper was introduced years ago in the commit daec7ad768841 ("kernel/3.10: add separate rootfs partition parser") and it was probably supposed to simplify code a bit. With the recent upstream commit 1eeef2d7483a7 ("mtd: handle partitioning on devices with 0 erasesize") the logic in allocate_partition got slightly more complex and we can't use this simple helper anymore as it doesn't support MTD_NO_ERASE properly. There also isn't any real gain from this helper, so it's probably easier to just don't use it *or* work on upstreaming it to avoid maintenance cost. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: fix PKG_CONFIG_DEPENDS to include version.mk entriesRafał Miłecki2017-06-221-1/+2
| | | | | | | | Including version.mk sets PKG_CONFIG_DEPENDS to config entries used for VERSION_SED command. We should keep these configs to make sure package gets refreshed when needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dnsmasq: add dhcp-range tags configurationGrégoire Delattre2017-06-202-2/+9
| | | | | | | | | | | | | | | | | | | dnsmasq can match tags in its dhcp-range configuration, this commit adds the option to configure it in the dhcp section uci configuration: config dhcp 'lan' option interface 'lan' list tag 'blue' list tag '!red' option start '10' option limit '150' option leasetime '12h' generated dnsmasq configuration: dhcp-range=tag:blue,tag:!red,set:lan,192.168.1.10,192.168.1.159,255.255.255.0,12h Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
* procd: update to latest git HEADDaniel Golle2017-06-191-3/+3
| | | | | | | | | | | 453116e system: introduce new attribute board_name e5b963a preinit: define _GNU_SOURCE e5ff8ca upgraded: cmake: Find and include uloop.h f367ec6 hotplug: fix a memory leak in handle_button_complete() 796ba3b service/service_stopped(): fix a use-after-free 79bbe6d system: return legacy board name Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: Fix not altering KERNELRELEASE for external kernelHauke Mehrtens2017-06-191-2/+1
| | | | | | | | | | | | When an external kernel tree is used the version should not get modified by the LEDE build scripts. This was added by Florian some time ago. The commit 0aed054becb21439 ("build: add KERNEL_MAKE and KERNEL_MAKE_FLAGS variables and move to kernel.mk") breaks this feature introduced in b6746a6ffb73 ("include: Do not alter KERNELRELEASE for external/git kernels"). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mtd-utils/mkfs.jffs2: honor env SOURCE_DATE_EPOCHAlexander Couzens2017-06-191-0/+62
| | | | | | | Use the timestamp from the enviroment SOURCE_DATE_EPOCH if set instead of the build time. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* firmware-utils: honor env SOURCE_DATE_EPOCHAlexander Couzens2017-06-199-12/+86
| | | | | | | | Use the timestamp from the enviroment SOURCE_DATE_EPOCH if set instead of the build time. Fixes reproducible builds for certain firmware images. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* libunwind: update to version 1.2.1Yousong Zhou2017-06-192-48/+2
| | | | | | | | | | Changes since 1.2 a77b0cd Bump version to v1.2.1 5f354cb mips/tilegx: Add missing unwind_i.h header file 620d1c3 Add aarch64 getcontext functionality. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netifd: update to the latest versionHans Dedecker2017-06-181-3/+3
| | | | | | | | ef5f7a0 ubus: remove superfluous error check in netifd_add_dynamic 5a68693 iprule: coding style line up 90e2e2c iprule: Add option to suppress unspecific routing lookups Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* scripts/package-metadata.pl: parse and validate field Require-UserYousong Zhou2017-06-182-1/+83
| | | | | | | | | | | | | The script will now detect uid/gid collision and can generate a table of current allocation ./scripts/package-metadata.pl usergroup tmp/.packageinfo \ | sort -k 1,1r -k 3,3n \ | column -t This should ensure that no collision will happen for each single build Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: allocate uid/gid starting from 65536Yousong Zhou2017-06-182-5/+5
| | | | | | | | | | | There already exist static assignment of uid/gid 65533 in packages feed and we have nobody/nogroup taking 65534 as their ids. Let's change the pid of dynamic assignment to start from 65536 so that the two assignment scheme will not collide with each other While at it, fix the scan command checking existence of uid/gid Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: remove optional ucidef_set_led_rssi parametersMathias Kresin2017-06-171-3/+3
| | | | | | The same values are set if the parameters are not specified. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: make ucidef_set_led_rssi offset and factor optionalMathias Kresin2017-06-171-2/+2
| | | | | | | | | | The offset and factor are only related for LEDs which can have different brightness values. But binary LEDs are more common and don't require any further configuation than setting the factor to 1. Use offset = 0 and factor = 1 in case nothing else is specified. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for TRENDnet TEW-638APB V2Pavlo Samko2017-06-176-0/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the TRENDnet TEW-638APB V2. Specification: - SoC: Ralink SoC RT3052F - Flash: 4MB - RAM: 32MB - Ethernet: 1x LAN (100 Mbps) - Wireless: 2.4GHz b/g/n, 2x external antenna - Buttons: 1x Reset, 1x WPS - LEDs: Power (green), Ethernet (green), WPS (green and orange), Wireless (green) - UART: 1x UART on PCB (3.3V, GND, RX, TX) - 57600 8N1 Installation via vendor firmware: - upload sysupgrade.bin image via TFTP: - stop uboot into tftp-load into option "2" - upload sysupgrade.bin image Signed-off-by: Pavlo Samko <bulldozerbsg@gmail.com>
* lantiq: show xdsl line init status on shared dsl/internet ledMathias Kresin2017-06-1713-19/+46
| | | | | | | | | | | | | On boards which don't have a distinct internet and dsl led, use the shared LED to indicate the xdsl line state and any traffic that is send/received via the netdev. This traffic doesn't necessarily need to be internet traffic. Rename the shared LED of existing configs to "dsl", to match the new defaults. The configuration of the to be renamed LED is identical with the new defaults. Signed-off-by: Mathias Kresin <dev@kresin.me>