aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* target.mk: let profile remove from DEFAULT_PACKAGESPhilip Prindeville2018-02-131-0/+2
| | | | | | | In a profile, specifying -pkg in the list of PACKAGES will suppress it even if it appears in the target's DEFAULT_PACKAGES list. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* ipq806x: switch to full dual-boot for the nbg6817 sysupgrade supportStefan Lippers-Hollmann2018-02-131-3/+23
| | | | | | | | | | | | | | Instead of writing to the currently booted partition set, this implements full dual-boot support for sysupgrade by always writing to the other, currently inactive, partition set and toggling the dualflag after a successful flash. The currently active/ booted partition set is determined by parsing /proc/cmdline for its rootfs parameter (supplied by the DTS), instead of reading from the 0:DUAL_FLAG mtd, in order to prevent (potentially) bricking both partition sets. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: request the first free loop device dynamically for the nbg6817 ↵Stefan Lippers-Hollmann2018-02-131-4/+5
| | | | | | | | | | | | sysupgrade Instead of hardcoding /dev/loop0, it's safer to query for the first free loop device and assign that dynamically. While /dev/loop0 is a reasonable assumption immediately following "losetup --detach-all", detaching the mounted overlay is no longer strictly necessary once dual-boot support has been added for the nbg6817. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: use absolute the device path in $kernel for the nbg6817 sysupgradeStefan Lippers-Hollmann2018-02-131-4/+4
| | | | | | | Harmonize the variable usage for $kernel and $rootfs to always contain the full device path, instead of just its basename. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: support new location of USB PHY kernel moduleLuis Araneda2018-02-131-1/+3
| | | | | | | PHY drivers were grouped into vendor specific directories by upstream commit 0b56e9a7e8358e59b21d8a425e463072bfae523c Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* i2c.mk: sort kernel modulesLucian Cristian2018-02-131-62/+66
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* hwmon.mk: sort kernel modulesLucian Cristian2018-02-131-100/+109
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* can.mk: sort modulesLucian Cristian2018-02-131-95/+96
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* crypto.mk: sort kernel modulesLucian Cristian2018-02-131-347/+359
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* fs.mk: sort kernel modulesLucian Cristian2018-02-131-69/+77
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* firewire.mk: sort kernel modulesLucian Cristian2018-02-131-14/+16
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* build: cleanup leftover qconf filesAlif M. Ahmad2018-02-131-1/+1
| | | | | | | | | | ``make xconfig`` toplevel target will invoke ``make qconf`` inside ./scripts/config directory, which results a ``qconf`` executable. This commit removes leftover ``qconf`` executable during ``make config-clean``. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* ar71xx: add more registers to ar71x_regs.hJulien Dusser2018-02-133-11/+388
| | | | | | | | | | Add more registers and flags to ar71x_regs.h for QCA955x and QCA956x SoCs. Values come from Qualcomm Atheros u-boot code. Patches can be merged into 622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* ramips: add support for D-Link DAP-1522 A1George Hopkins2018-02-138-10/+174
| | | | | | | | | | | | | | | | | | D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
* mtd: add fixwrg commandGeorge Hopkins2018-02-134-3/+233
| | | | | | Add a command to fix WRG headers, based on wrgg.c. Signed-off-by: George Hopkins <george-hopkins@null.net>
* kernel: mtdsplit: split by WRG headerGeorge Hopkins2018-02-131-3/+18
| | | | | | | Support splitting WRG images, which can be found in older D-Link devices. Signed-off-by: George Hopkins <george-hopkins@null.net>
* kernel: add missing symbolJohn Crispin2018-02-132-0/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* uqmi: bump package releaseKoen Vandeputte2018-02-131-1/+1
| | | | | | fixes: da8990e717e1 ("uqmi: use built-in command for data-link verification") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Add eTactica EG-200 supportKarl Palsson2018-02-1313-1/+140
| | | | | | | | | | | | | | EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson <karlp@etactica.com>
* uqmi: use built-in command for data-link verificationKoen Vandeputte2018-02-131-1/+19
| | | | | | | | | | | uqmi contains a command for directly querying the modem if there is a valid data connection, so let's use it. This avoids the cases were all previous tests are succesful, but the actual data link is not up for some reasons, leading to states were we thought the link was up when it actually wasn't .. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use correct value for connection checkingKoen Vandeputte2018-02-131-4/+8
| | | | | | | | | | | | | | Originally, the implementation only checked if uqmi command execution succeeded properly without actually checking it's returned data. This lead to a pass, even when the returned data was indicating an error. Rework the verification to actually check the returned data, which can only be correct if the uqmi command itself also executed correctly. On command execution success, value "pdh_" is a pure numeric value. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use general method for state cleaningKoen Vandeputte2018-02-131-10/+4
| | | | | | | | | | Debugging shows that using the general method properly cleans on each run, while the method specifying the client-ID shows "No effect" even while in connected state. Fixes several connectivity issues seen on specific modems. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: use new image build code for WHR-G300NINAGAKI Hiroshi2018-02-132-42/+21
| | | | | | | | The tftp.bin image for Buffalo WHR-G300N was not built, so I was fixed it after rewriting to new image build code. And the code for factory-EU.bin was broken, so I deleted it. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: remove the CPU_SUBTYPEJohn Crispin2018-02-131-1/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* cns3xxx: remove linux 4.9 supportKoen Vandeputte2018-02-1329-1607/+13
| | | | | | | | - Remove kernel 4.9 support - Apply specific 4.14 changes directly to source - Refreshed all Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* target: Remove nomips16 option.Rosen Penev2018-02-131-3/+1
| | | | | | There is no target with a CPU subtype of nomips16. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/mkimage: copy mkenvimage to bin directoryEvgeniy Didin2018-02-131-0/+2
| | | | | | | | | | | | | | For some boards u-boot binary environment file is required, which is generated by mkenvimage utility. But in OpenWrt there is no separate support for mkenvimage, which is a part of u-boot tools. mkenvimage gets built in u-boot/tools as well as mkimage anyways. So lets just copy mkenvimage to the $(STAGING_DIR_HOST)/bin/ directory. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John Crispin <john@phrozen.org>
* kernel: add missing symbol for v4.14John Crispin2018-02-131-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* octeontx: add support for OCTEON TX targetTim Harvey2018-02-138-0/+1049
| | | | | | | | | | | The Cavium OCTEON TX is an ARM 64-bit SoC leveraging CPU cores and periperhals from the Cavium ThunderX SoC. This initial support provides a 4.14 kernel and kernel+initramfs that is bootable on the Gateworks Newport GW630x as well as the Cavium sff8104 reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* packages: uboot-mxs: override instead of appending u-boot make flagsMichael Heimpold2018-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This prevents passing down the HOSTCC stuff set in u-boot.mk which results in linking errors against openssl: tools/mxsimage.o: In function `sb_aes_reinit': mxsimage.c:(.text+0x202): undefined reference to `EVP_CIPHER_CTX_reset' tools/mxsimage.o: In function `mxsimage_generate': mxsimage.c:(.text+0x110d): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x114f): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x11c3): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x1323): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x134a): undefined reference to `EVP_CIPHER_CTX_reset' tools/mxsimage.o: In function `mxsimage_verify_print_header': mxsimage.c:(.text+0x23ce): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x242c): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x246b): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x24ef): undefined reference to `EVP_CIPHER_CTX_reset' mxsimage.c:(.text+0x2e52): undefined reference to `EVP_MD_CTX_free' collect2: error: ld returned 1 exit status Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* packages: uboot-mxs: bump to 2017.11Michael Heimpold2018-02-132-120/+292
| | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mxs: rename files to files-4.9Michael Heimpold2018-02-131-0/+0
| | | | | | | | The Device Tree file for I2SE Duckbill boards was updated upstream. Let's use the upstream version for upcoming kernel 4.14 by keeping our current version for v4.9 still around. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* ramips: Add support for the GnuBee Personal Cloud TwoRosen Penev2018-02-137-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GnuBee Personal Cloud Two crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 3.5" Drives - One SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: Three Ports - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Three GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud Two ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Errata: - While there are three ethernet ports, the third requires support for the second GMAC. This will come in kernel 4.14. - The first hard drive slot has a clearance issue with the two fan headers. Workaround is to pull the headers out and connect the pins to jumper wires. - Using this device as a NAS is problematic with the 4.9 kernel as many /dev/sdX reads throw silent errors. The current theory behind this is some kind of unhandled DMA mapping error in the kernel. This is not an issue with kernel 4.4. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iptables: Support building connlabel moduleKristian Evensen2018-02-133-0/+34
| | | | | | | | | | It is currently possible to enable connlabel-support in iptables. However, in order for connlabel to work properly, the kernel module must also be present. This patch adds support for building the connlabel-module, and selects it by default when connlabel-support is enabled. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* layerscape: fix call trace of pfe module removingYangbo Lu2018-02-131-14/+5
| | | | | | | | Updated pfe kernel patch to clean up iounmap(pfe->ddr_baseaddr). pfe->ddr_baseaddr was got through phys_to_virt() not ioremap(), so iounmap() for pfe->ddr_baseaddr should be removed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix DPAA2 QDMA issueYangbo Lu2018-02-131-0/+134
| | | | | | | This patch is to reverse a upstream dmatest patch for now which is causing DPAA2 QDMA test issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add a make menuconfig known issue in READMEYangbo Lu2018-02-131-0/+6
| | | | | | | This patch is to add a known issue of make menuconfig in README file. This is also a common issue for OpenWrt. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix type for kernel 4.9 dpaa2_mac_get_stats() functionYangbo Lu2018-02-131-7/+8
| | | | | | | | This patch changes the declarations of ndo_get_stats64 handlers to the previous struct rtnl_link_stats64 * return type instead of the mainline void return. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update READMEYangbo Lu2018-02-131-23/+32
| | | | | | | | Tis patch is to fix up some descriptions in README. Per-device rootfs had been supported, and a known issue had been found. These also should be updated accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: support ubifs rootfs in u-boot envYangbo Lu2018-02-135-15/+15
| | | | | | | ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb firmwares now use ubifs rootfs. So u-boot env should be set accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: support ubifs rootfsYangbo Lu2018-02-133-10/+37
| | | | | | | | | Some layerscape devices (ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb) were using ext4 rootfs because there were issues using squashfs. This patch is to drop using ext4 rootfs and use ubifs rootfs instead which is more proper for SPI-NOR flash. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK1712Yangbo Lu2018-02-134-32/+32
| | | | | | | This patch is to update layerscape u-boot to NXP LSDK1712 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe firmware to LSDK1712Yangbo Lu2018-02-131-5/+5
| | | | | | | | Updated ppfe firmware to NXP LSDK1712 release. Used ppfe firmware git tree on NXP github since it was migrated here from qoriq-open-source github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ls-rcw-bin packageYangbo Lu2018-02-132-28/+103
| | | | | | | | | | | | NXP LSDK1712 release used two rcw git trees. The original rcw git tree was still source code but dropping ls1012a/ls1088a/ls2088a boards in LSDK1712. Instead another new rcw git tree was used to just provided rcw binaries for these boards dropped. So this patch is to update ls-rcw to LSDK1712 release and add a new ls-rcw-bin package. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update PPA firmware to LSDK1712Yangbo Lu2018-02-131-3/+3
| | | | | | | This patch is to update PPA firmware to NXP LSDK1712 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: migrate fman-ucode to NXP githubYangbo Lu2018-02-131-1/+1
| | | | | | | | fman-ucode had been migrated from qoriq-open-source github to NXP github. So the Makefile should be fixed accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update MC firmware to LSDK1712Yangbo Lu2018-02-131-6/+6
| | | | | | | | Updated MC firmware to NXP LSDK1712 release. Used MC firmware git tree on NXP github since it was migrated here from qoriq-open-source github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: remove USB configs for 64-bitYangbo Lu2018-02-131-46/+2
| | | | | | | Removed USB configs for 64-bit device since they're already in kmod package. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: remove USB and TI specific configs for 32-bitYangbo Lu2018-02-131-155/+2
| | | | | | | | This patch is to remove USB configs for 32-bit device since they're already in kmod package. Also removed TI platform specific configs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update patches-4.9 to LSDK1712Yangbo Lu2018-02-1333-2062/+5557
| | | | | | | | | | | | | Patches changes - Updated patches-4.9 to NXP LSDK1712 linux-4.9. - Merged changes of patch 303 into integrated patch 201. - Split changes of patch 706 into dpaa part and dpaa2 part, and merged these changes into integrated patches 701 and 705. - Removed patch 819 since ehci-fsl driver could be compiled now. - Refreshed these patches. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>