aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: fix wrong definition for tsense calibAnsuel Smith2019-12-261-2/+2
| | | | | | | | | We have only 11 sensors on ipq806x. Fix the reg property to load the right amount of data instead of the entire space. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: rework ipq806x specific tsense temp driverAnsuel Smith2019-12-261-0/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | Tsense driver for ipq806x have various problem. - Emit wrong error. On probing of this driver, nvmem driver can be not ready and this cause a EDEFER error. Actually this is not an error as the kernel will retry to probe the driver after the nvmem driver is loaded. - Use uninitialized value on trigger of critical temp - Doesn't free allocated memory Because of this, rework the driver and improve it by removing extra load of data. Change the logic of loading data. Use the backup calib data only when the calib data is not present. As the calibration is only needed to set the temp offset, we don't really need to read both calib data and set the offset based only on the backup one. Also change how the notifier function work. At times when we output the trigger message, we already have read the temp so remove the extra read and the wrong uninitialized data that probably caused a kernel panic for null pointer exception. (Think we never experience this bug because the router never reached that temp ever... So just lucky) Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: update kernel config with new driverAnsuel Smith2019-12-261-1/+1
| | | | | | | The config name for cpufreq driver has changed. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: refresh new and changed patchesAnsuel Smith2019-12-269-212/+496
| | | | | | | Refresh patches to remove fuzz Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq8065: update dtsi with new opp tableAnsuel Smith2019-12-261-53/+91
| | | | | | | | The new driver use opp table to register frequency. Drop psv bindings as they are not used anymore. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq8064: update dtsi with new opp tableAnsuel Smith2019-12-261-44/+80
| | | | | | | | | The new driver use opp table to register frequency. Drop psv bindings as they are not used anymore. Adds speedbin definition for nvmem driver Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: add patch to support krait cpu scaling driverAnsuel Smith2019-12-261-0/+351
| | | | | | | | | | This patch has been proposed but never actually merged to mainline. It was accepted but never re proposed by the creator. Rework it, fix kernel panic cause by double kfree. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: backport qcom-cpufreq-kryo patchAnsuel Smith2019-12-263-0/+551
| | | | | | | | Backport patch applied to qcom-cpufreq-kryo driver as krait cpu will base on this driver. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: drop old cpufreq patchAnsuel Smith2019-12-263-399/+0
| | | | | | | | Drop old cpufreq as now we have new driver that can use normal kernel opp definition Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: opp/core: update patch updating voltage tolerance on voltage adjustAnsuel Smith2019-12-261-12/+21
| | | | | | | | | | | Rework 0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t to reflect changes upstream. - Skip unnecessary allocation of buffer to set u_volt - Change opp u_volt directly Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: opp/core: update patch allowing adjusting of OPP voltages at runtimeAnsuel Smith2019-12-261-61/+71
| | | | | | | | Update 0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime with upstream version. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: fix bug in L2 cache scalingAnsuel Smith2019-12-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been notice a buf in L2 cache scaling where the scaling is not done proprely if the frequency is set to the initial state before the new frequency. From: https://patchwork.kernel.org/patch/10565443/ * The clocks are set to aux clock rate first to make sure the * secondary mux is not sourcing off of QSB. The rate is then set to * two different rates to force a HFPLL reinit under all * circumstances. In the initial stage of boot to force a new frequency to apply, is needed to first set the frequency back to the lowest one (aux_rate) and then to the target one. This force and make sure the controller actually switch the frequency to the right one. Apply the same mechanism to L2 frequency scaling. Before scaling to the target frequency, first set the frequency to the aux_rate to force the transition, then scale it to the target frequency. Doing the wrong way can produce unexpected results and could lock the scaling mechanism until a full reboot is done (Causing a full reset by the krait-cc driver) From: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=77612720a2362230af726baa4149c40ec7a7fb05 When the Hfplls are reprogrammed during the rate change, the primary muxes which are sourced from the same hfpll for higher frequencies, needs to be switched to the 'safe secondary mux' as the parent for that small window. This is done by registering a clk notifier for the muxes and switching to the safe parent in the PRE_RATE_CHANGE notifier and back to the original parent in the POST_RATE_CHANGE notifier. This should apply also to L2 scaling... as we can't relly use the notifier, we manually do this on L2 scaling. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ath79: tp-link: use ath10k-ct-smallbuffers for 64 MiB devicesPaul Fertser2019-12-251-5/+6
| | | | Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* brcm2708: fix malformed patchÁlvaro Fernández Rojas2019-12-251-2/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wireguard: bump to 20191219Kevin Darbyshire-Bryant2019-12-241-4/+3
| | | | | | | | | | edad0d6 version: bump snapshot 0e38a3c compat: ipv6_dst_lookup_flow was backported to 5.3 and 5.4 2e52c41 wg-quick: linux: use already configured addresses instead of in-memory 3721521 tools: adjust wg.8 syntax for consistency in COMMANDS section 21a1498 wg-quick: linux: try both iptables(8) and nft(8) on teardown Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* brcm2708: update to latest patches from RPi FoundationÁlvaro Fernández Rojas2019-12-24803-2031/+8999
| | | | | | Also removes reverted patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: organize kernel patchesÁlvaro Fernández Rojas2019-12-241372-95751/+95751
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 4.9 to 4.9.207Hauke Mehrtens2019-12-2423-49/+49
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.160Hauke Mehrtens2019-12-2411-18/+18
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, apm821xx Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.19 to 4.19.91Hauke Mehrtens2019-12-2412-24/+24
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, apm821xx Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.19 to 4.19.90Koen Vandeputte2019-12-2435-388/+155
| | | | | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 010-dmaengine-dw-dmac-implement-dma-prot.patch - 950-0148-Increase-firmware-call-buffer-size-to-48-bytes.patch - 950-0206-Mailbox-firmware-calls-now-use-kmalloc-2749.patch - 402-leds-trigger-netdev-fix-handling-on-interface-rename.patch Fixes: - CVE-2019-19332 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [Add 010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.159Koen Vandeputte2019-12-2444-270/+142
| | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 302-0002-dmaengine-dw-implement-per-channel-protection-contro.patch Fixes: - CVE-2019-19332 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: use ath10k-ct-smallbuffers for 64 MiB devicesPaul Fertser2019-12-243-14/+14
| | | | Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to dependsHauke Mehrtens2019-12-241-6/+6
| | | | | | | Only select ath10k-ct-regular when smallbuffers version was not selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: ath10k-ct: provide a build variant for small RAM devicesPaul Fertser2019-12-243-1/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to many bugreports [0][1][2] the default ath10k-ct kernel module is unusable on devices with just 64 MiB RAM or with 128 MiB and dual ath10k cards. The target boards boot but eventually oom-killer starts to interfere with normal operation, so the current state is effectively broken. Since the two patches in question have a performance impact (and possibly some other unexpected side-effects) a dedicated build variant is added so that users of the low RAM devices can still benefit from all the ath10k-ct advantages. According to testing [3] results, the issue can be experienced even with "a 256MB device with three radios". Measured performance impact of implementing small buffers was lowering "the maximum 5 GHz throughput on an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for TCP transfers (download/upload) to 438/343 Mbit/s" The patches were apparently inspired by QSDK tweaks used by ODMs for the affected devices. [0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html [1] https://github.com/openwrt/openwrt/pull/1077 [2] https://bugs.openwrt.org/index.php?do=details&task_id=2664 [3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701 Signed-off-by: Paul Fertser <fercerpav@gmail.com> [Remove double CONFIG_ATH10K-CT_LEDS entry] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: Remove self from MAINTAINER entriesFlorian Fainelli2019-12-238-9/+1
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* brcm2708-gpu-fw: update to latest firmwareÁlvaro Fernández Rojas2019-12-231-16/+16
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: Deactivate CONFIG_SFP in generic configHauke Mehrtens2019-12-235-4/+1
| | | | | | | | Deactivate CONFIG_SFP for kernel 4.19 in the generic configuration. The CONFIG_SFP configuration option was not set to anything in the ath79 build for me, set it to deactivated by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: Do not build dlink_dir-615-e4 by defaultHauke Mehrtens2019-12-231-0/+1
| | | | | | | The factory image for the dlink_dir-615-e4 is getting too big which makes the full ath79 tiny build fail, deactivate it by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: remove unneeded patchesÁlvaro Fernández Rojas2019-12-2383-183652/+3
| | | | | | | - wireless patches - defconfig patches Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* libcxx: Depenency fixesRosen Penev2019-12-232-4/+5
| | | | | | | | | | | | | Don't build with uClibc-ng. It's totally unsupported as several functions are missing. Make the musl libc support conditional. Fix hash with make check FIXUP=1. Apparently I based the Makefile off of libedit and forgot to fix the hash. Signed-off-by: Rosen Penev <rosenp@gmail.com> Fixes: 856ea2bad3b3 ("libcxx: Add package")
* ramips: add label MAC address for Mikrotik RB750Gr3Sven Roederer2019-12-231-3/+1
| | | | | | | | | | | | The device label contains: E01: 74:4D:28:xx:xx:30 E05: 74:4D:28:xx:xx:34 The first value corresponds to the address set in hard_config 0x10. That one is taken for the label MAC address. Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* ramips: simplify state_default/pinctrl0 in device DTS filesAdrian Schmutzler2019-12-23295-1941/+1355
| | | | | | | | | The node pinctrl0 is already set up in the SOC DTSI files, but defined again as member of pinctrl in most of the device DTS(I) files. This patch removes this redundancy for the entire ramips target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: fix *-gpio-custom module unloadingSungbo Eo2019-12-234-6/+6
| | | | | | | | | | | | | | | | | | | | | Unloading and reloading the modules fails, as platform_device_put() does not release resources fully. root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5 [ 196.860620] Custom GPIO-based I2C driver version 0.1.1 [ 196.871162] ------------[ cut here ]------------ [ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158 [ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0' ... [ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory. This patch fixes it by replacing platform_device_put() to platform_device_unregister(). Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix") Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* rpcd: add respawn paramFlorian Eckert2019-12-232-1/+2
| | | | | | | | | | The rpcd service is an important service, but if the service stops working for any reason, no one will ever respawn that service. With this commit, the procd service will monitor if the rpcd service is running. If the rpcd service has crashed, then procd respawns the rpcd service. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* cmake: Install host packages to lib instead of lib64Rosen Penev2019-12-231-0/+1
| | | | | | | | | Several CMake packages such as log4cplus and protobuf(-c) install to lib64 instead of lib on some hosts. This completely breaks rpath linking. Override it globally to avoid fixing each package individually. Signed-off-by: Rosen Penev <rosenp@gmail.com> Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
* adb: fix for SuperSpeed devicesBjørn Mork2019-12-233-2/+41
| | | | | | | | | | | | | | The USB descriptor parsing in adb fails to detect SuperSpeed devices because of the SuperSpeed Endpoint Companion Descriptor. This cherry-picks the upstream fix for the problem. Unfortunately there never were a release with this fix before the conversion to C++, so upgrading to a newer version isn't an option. This makes adb work with SuperSpeed devices like the Sierra Wireless EM7565. Tested and verified. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ca-certificates: provide ca-certs by both ca-certificates and ca-bundleMaxim Storchak2019-12-231-2/+4
| | | | | | | | | - both packages provide ca-certs - make ca-bundle the default provider This should allow easy transition between these two forms of CA certificates storage Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
* libcxx: Add packageRosen Penev2019-12-234-2/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in OpenWrt, there are two libc++: libstdcpp and uClibc++. The former is huge and the latter supports only C++98 with some basic support for C++11. Those C++ versions seem to be specific to the compiler version libcxx supports C++11 and above while being much smaller than libstdcpp. On mt7621, these are the sizes of the ipks that I get: libstdcpp: 460786 libcxx: 182881 uClibc++:67720 libcxx is faster than uClibc++ and is under active development as part of the LLVM project while uClibc++ is effectively dead. This PR modifies uclibc++.mk to expose the make menuconfig option. Further cleanup is beyond the scope of this PR. What that means is, this is not used by default. A g++-libcxx wrapper based on the uClibc++ one was added. Works the same way. Compile tested with all packages that use uclibc++.mk in their Makefiles under mipsel_24kc. kismet fails compilation but that package needs to be cleaned up and updated. Runtime tested with gddrescue, gdisk, dcwapd, bonnie++, and aircrack-ng on a TP-Link Archer C7v2. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iperf: Fix compilation with libcxxRosen Penev2019-12-232-1/+13
| | | | | | Avoids redefining bool. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: build proper VMDK formats for ESXI 6.5John Sommerville2019-12-231-0/+6
| | | | | | | | | | | | | | | | | | | | | VMWare ESXI 6.5 and above is not compatible with subformat=monolithicSparse (The default qemu-img convert -O VMDK option). Monolithic Sparse vmdk can be imported, but issues occur when running sysupgrade with new images and other tasks that modify the file system (issues like Kernel panics, reboot loops, sometimes crashing the Host ESXI box). This change creates an additional VMDK output file for ESXI that sets the subformat to monlithicFlat, and the adapter_type to the SCSI lsilogic controller. This change existed back on: 25e36d379e73d64d6316fae9dc841c5ef28980f1 But it looks like the change was removed when refactoring occurred with: 5f6a2732f892b6229473576d89cc963ae9c97d5d Signed-off-by: John Sommerville <jsommerville@untangle.com>
* tools: qemu: Add patches to support adapter_type and monolithicFlatBrett Mastbergen2019-12-2312-0/+2340
| | | | | | | Its way more trouble to update this to a newer version of qemu than it is to backport the two additional features we need. Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* scripts/dowload.pl: add archive.apache.org to apache mirror listJiri Kastner2019-12-231-0/+1
| | | | | | | | apache mirrors holds only latest releases, to download older releases, one must use archive.apache.org to get them. Signed-off-by: Jiri Kastner <cz172638@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesStefan Lippers-Hollmann2019-12-231-20/+20
| | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * No changes to wave-1, but I make a version .014 copy anyway to keep the makefile in sync. The release notes since last time for wave-2: * December 16, 2019: Wave-2 has a fix to make setting txpower work better. Before setting the power was ignored at least some of the time (it also appeared to work mostly, so I guess it was being correctly set in other ways). Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* linux-firmware: update to 20191215DENG Qingfang2019-12-233-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20191215 git log --pretty=oneline --abbrev-commit 20190815..20191215 eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware c523dcd WHENCE: Add raspberry-pi4 SDIO file 99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware 2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4 4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware e10ed21 qcom: update venus firmware files for v5.4 af4c4be cxgb4: Update firmware to revision 1.24.11.0 f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B 212e441 qcom: Add SDM845 Compute DSP firmware ec84cf9 qcom: Add SDM845 Audio DSP firmware 62d0a1a qcom: Add SDM845 modem firmware e8a0f4c rtl_nic: add firmware rtl8168fp-3 9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware 978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0 c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201 6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200 84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560 96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260 7319341 amdgpu: update navi14 vcn firmware b363d9d amdgpu: update navi10 vcn firmware f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware 4debf21 i915: Add HuC firmware v7.0.3 for TGL 1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL 4b0a210 i915: Add HuC firmware v9.0.0 for EHL 610fe75 i915: Add GuC firmware v33.0.4 for EHL 11bdc57 rtw88: RTL8723D: add firmware file v48 9e194c7 qed: Add firmware 8.40.33.0 4065643 amdgpu: add new navi14 wks gfx firmware for 19.30 d4f88ea amdgpu: update navi14 firmware for 19.30 ea755b6 amdgpu: update raven firmware for 19.30 340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201 ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308 e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308 b27d123 rtl_nic: add firmware files for RTL8153 180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU 0acd93e bnx2x: Add FW 7.13.15.0. 2b016af linux-firmware: Update AMD cpu microcode 4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200 7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201 fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560 b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260 aa95e90 amdgpu: add initial navi14 firmware form 19.30 c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant. 7d187ac ice: Fix up WHENCE entry and symlink 4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware 7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24 c054c53 nvidia: Add XUSB firmware for Tegra194 9cfefbd Remove duplicate symlinks 2de7abd copy-firmware: Create symlinks from WHENCE file 2116bcd Make symlinks consistent c0590d8 amdgpu: update vega20 ucode for 19.30 43cc648 amdgpu: update vega12 ucode for 19.30 ffa0ed7 amdgpu: update vega10 ucode for 19.30 83e1b41 amdgpu: update picasso ucode for 19.30 7008617 amdgpu: update raven2 ucode for 19.30 9200baa amdgpu: update raven ucode for 19.30 f25a39c amdgpu: add new raven rlc firmware 9ae61e7 ice: Add package file for Intel E800 series driver 417a9c6 amdgpu: add initial navi10 firmware 702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware 3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware 3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake 60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake 2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton 38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake 8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL 51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL 88ea23e qcom: add firmware files for Adreno a630 6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201 6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware d45c950 nvidia: Add XUSB firmware for Tegra186 65c6595 Add symlinks for Tegra VIC firmware binaries 0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1 f667c00 rtl_nic: add firmware rtl8125a-3 fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201 2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory. 7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC 65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 40e4162 iwlwifi: update FWs to core45-152 release c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4 665001a linux-firmware: Update firmware file for Intel Bluetooth AX200 c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201 b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560 fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260 ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [Added missing symbolic links to Makefile] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAMEJeffery To2019-12-231-0/+30
| | | | | | | | | | | | | | | | | | This backports the patch for GCC PR target/89587 (gcc's rs6000 configuration unconditionally sets MULTIARCH_DIRNAME, even when multiarch is disabled). This currently affects apm821xx and may cause issues when cross-compiling packages, e.g. Python 3[1]. This includes patches for GCC 8 (with the changelog diff removed); this change is already included in GCC 9.2 and 7.5. [1]: https://github.com/openwrt/packages/issues/10552 Signed-off-by: Jeffery To <jeffery.to@gmail.com> [Removed patch for GCC 7.4.0, GCC 7.5.0 already contains this] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/gcc: correct the check expr for newer clangYorkie Liu2019-12-231-1/+1
| | | | | | | This fixes gcc build error within clang 11.0, it tweaks the version string from LLVM to clang. Signed-off-by: Yorkie Liu <yorkiefixer@gmail.com>
* lantiq: enable 5ghz wifi on VR200/VR200vKevin Schmidt2019-12-232-3/+22
| | | | | | Enable mt76 driver on VR200/VR200v. Signed-off-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
* lantiq: fix phys ledAleksander Jan Bajkowski2019-12-231-2/+2
| | | | | | | | led2l and led2h value is incorrectly set by led3l and led3h. Bug was introduced in commit: 863e79f8d5544a8a884375d7e867f350fddca9b9 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Fixes: 863e79f8d554 ("lantiq: add support for kernel 4.9")
* uhttpd: reset PKG_RELEASEJo-Philipp Wich2019-12-221-1/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 22:13:48 +0000