aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bgmac: fix regressed support for BCM53573 SoCsRafał Miłecki2023-07-101-0/+45
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d54f3b2cfdbd34aa61ca67fd590eebfdf3db51cf)
* bcm47xx: fix bgmac MTU patch filenameRafał Miłecki2023-07-101-0/+0
| | | | | | Fixes: 4970dd027bce ("bcm47xx: revert bgmac back to the old limited max frame size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 83aeb0bbd47638b42ee6cdda351d0c51e014d790)
* kernel: backport NVMEM patches queued for the v6.5Rafał Miłecki2023-07-1013-1/+920
| | | | | | | This includes some driver changes and support for fixed cells layout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 07bdc5551558287f7a99f6ae8e6d82d7d09d5781)
* kernel: net: phy: realtek: fix rtl822x_probe on unsupported devicesMartin Schiller2023-07-082-21/+5
| | | | | | | | | Calling rtl822x_probe() on phy devices which uses the rtl822x_read_mmd() and rtl822x_write_mmd() functions makes no sense and the probe ends with an EOPNOTSUPP error. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 5af7d47cd7fb936dc7d640e1ba63443152d0416a)
* ramips/mt7621: disable the cpufreq driverFelix Fietkau2023-07-081-7/+3
| | | | | | | It causes a noticeable performance decrease Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit dc38199b96ee3ef0ac52873893c42e28fa0564fa)
* kernel: sort generic configurationAleksander Jan Bajkowski2023-07-081-1/+1
| | | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new $ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 $ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new $ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 4f197f91342bc5e1f202c091c2c2f90e949d0749)
* kernel: bump 5.15 to 5.15.120John Audia2023-07-086-8/+8
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 0dc0504fc8e5f0c3cafe6c1da7192f51a09c5bc3)
* wolfssl: update to 5.6.3Nick Hainke2023-07-083-6/+31
| | | | | | | | | | | | | | | | Release Notes: - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.0-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.2-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.3-stable Refresh patch: - 100-disable-hardening-check.patch Backport patch: - 001-fix-detection-of-cut-tool-in-configure.ac.patch Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 0e83b5e6cc8e2970905a2b32c990fa7491ff733c)
* kernel: fix KernelPackage when all KCONFIG are versionedJohn Thomson2023-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | If a kernel package was defined where all KCONFIG symbols were dynamic, and versioned, no FILES would be installed, as the foreach evaluation was providing the value of the variable defined by the KCONFIG symbol name including the version test Fix this by calling the version_filter function on the list of KCONFIG variable names run through by foreach Example, kernel 6.1: KCONFIG:=CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1 filter-out any KCONFIG settings forced by package: CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1 there are dynamic settings, so for each of them, get the value of the make variable defined by symbol name: CONFIG_OLD@lt6.1 is not set CONFIG_NEW@ge6.1 is not set versus CONFIG_OLD is not set CONFIG_NEW=m test if any of these are m, or y if yes, install files, otherwise, nothing to install Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> (cherry picked from commit b3448b3fdb59d25dce05991dc8f322c1020b090b)
* x86: set CONFIG_X86_AMD_PLATFORM_DEVICEJohn Audia2023-07-082-2/+2
| | | | | | | Needed by AMD processors using Carrizo and later chipsets Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 946100ba4128dbee8faf3c03afb692bca74d75fa)
* mxs: rework image generationZoltan HERPAI2023-07-066-103/+65
| | | | | | | | Migrate to "new" image generation method. Device profiles will be generated based on image/Makefile instead of profiles/ , which will also allow to automatically build images for all supported devices via buildbot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ipq-wifi: fix upstream board-2.bin ZTE M289F snafuChristian Lamparter2023-07-042-2/+4
| | | | | | | | | | | | | | | | | | | | | The upstream board-2.bin file in the linux-firmware.git repository for the QCA4019 contains a packed board-2.bin for this device for both 2.4G and 5G wifis. This isn't something that the ath10k driver supports. Until this feature either gets implemented - which is very unlikely -, or the upstream boardfile is mended (both, the original submitter and ath10k-firmware custodian have been notified). OpenWrt will go back and use its own bespoke boardfile. This unfortunately means that 2.4G and on some revisions the 5G WiFi is not available in the initramfs image for this device. Fixes: #12886 Reported-by: Christian Heuff <christian@heuff.at> Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d)
* mt76: update to the latest versionFelix Fietkau2023-07-041-3/+3
| | | | | | | f704e4f83c6f mt76: mt7915: fix copy&paste issue on capability check rework Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 816933bee6e6b68156f6aeea083117208bf859f8)
* ramips: mt7621: add TP-Link EAP613 v1Sander Vanheule2023-07-034-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TP-Link EAP613 v1 is a ceiling-mount 802.11ax access point. It can be powered via PoE or a DC barrel connector (12V). Connecting to the UART requires fine soldering and careful manipulation of any soldered wires. Device details: * SoC: MT7621AT * Flash: 16 MiB SPI NOR * RAM: 256 MiB DDR3L * Wi-Fi: * MT7905DA + MT7975D: 2.4 GHz + 5 GHz (DBDC), 2x2:2 * Two stamped metal antennas (ANT1, ANT2) * One PCB antenna (ANT3) * One unpopulated antenna (ANT4) * Ethernet: * 1× 10/100/1000 Mbps port with PoE * LEDs: * Array of four blue LEDs with one control line * Buttons: * Reset * Board test points: * UART: next to CPU RF-shield and power circuits * JTAG: under CPU RF-shield (untested) * Watchdog: 3PEAK TPV706 (not implemented) Althought three antennas are populated, the MT7905DA does not support the additional Rx chain for background DFS detection (or Bluetooth) according to commit 6cbcc34f50a3 ("ramips: disable unsupported background radar detection"). MAC addresses: * LAN: 48:22:54:xx:xx:a2 (device label) * WLAN 2.4 GHz: 48:22:54:xx:xx:a2 * WLAN 5 GHz: 48:22:54:xx:xx:a3 The radio calibration blob stored in flash also contains valid MAC addresses for both radio bands (OUI 00:0c:43). Factory install: 1. Enable SSH on the device via web interface 2. Log in with SSH, and run `cliclientd stopcs` 3. Upload -factory.bin image via web interface. It may be necessary to shorten the filename of the image to e.g. 'factory.bin'. Recovery: 1. Open the device by unscrewing four screws from the backside 2. Carefully remove board from the housing 3. Connect to UART (3.3V): * Find test points labelled "VCC", "GND", "UART_TX", "UART_RX" * Solder wires to test points or connect otherwise. Be careful not to damage the PCB e.g. by pulling on soldered wires. * Open console with 115200n8 settings 4. Interrupt bootloader and use tftpboot to start an initramfs: setenv ipaddr $DEVICE_IP setenv serverip $SERVER_IP tftpboot 84000000 openwrt-initramfs-kernel.bin bootm DO NOT use saveenv to store modified u-boot environment variables. The environment is saved at flash offset 0x30000, which erases part of the (secondary) bootloader. The device uses two bootloader stages. The first stage will load the second stage from a uImage stored at flash offset 0x10000. In case of a damaged second stage, the first stage should allow uploading a new image via y-modem (untested). Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit 11588c52b47c2c3b2cdc7849ce9e4804bfdb8bb5)
* firmware-utils: bump to git HEADSander Vanheule2023-07-031-3/+3
| | | | | | | | | | | Add support for a number of new TP-Link devices. 9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1 bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5 a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1 Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit 0cdcf0338290a83d7679005e80cf7f547860bfc5)
* mediatek: define NMBM management region for WAX220David Bauer2023-07-021-0/+5
| | | | | | | | | The NETGEAR WAX220 employs NMBM on SPI-NAND. In order to avoid dealing with invalid factory data, enable NMBM in the area preceding the UBI volume. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 92eec257dd562547bc08ee76c1901eb22b66937c)
* libnl-tiny: update to latest git HEADHauke Mehrtens2023-07-021-3/+3
| | | | | | | d433990 Make struct nla_policy and struct nlattr const Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 513bcfdf78d7ffbcf244da2e6910a3d04b17ae01)
* linux-firmware: ibt-firmware: install sfi/ddc files for AX210 cardMathew McBride2023-07-022-1/+3
| | | | | | | | | | | | | | | | | | | When using an Intel AX210 card, the Bluetooth hci interface failed to start due to a missing "ibt-0041-0041.sfi" file. Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0041-0041.sfi (-2) A device specific configuration file (DDC) is also required: Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi Bluetooth: hci0: Waiting for firmware download to complete ... Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc Bluetooth: hci0: Applying Intel DDC parameters completed Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562 Fixes: #8558 Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit fff6833d4c01205156f9431a111a51f96642b476)
* generic: filter out CONFIG_FRAME_WARNRobert Marko2023-07-021-0/+1
| | | | | | | | | | | | | | CONFIG_FRAME_WARN value is set by config/Config-kernel.in based on the target type dynamically since commit: 16a2051 ("kernel: Set CONFIG_FRAME_WARN depending on target"). However, CONFIG_FRAME_WARN was not set to get filtered out so it ended up in multiple target configs during refreshes. So, lets filter out CONFIG_FRAME_WARN as its set dynamically to prevent it ending up in more target configs. Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit 7a9a4168bb7f4b77c300afb99c163c793305e84f)
* zbt-wd323: add GPIO WDT supportJoshua O'Leary2023-07-021-0/+8
| | | | | | | | | | | | | | | Watchdog has not been properly configured for this router - the PCB has a hardware watchdog connected to one of the GPIO pin 21 [1] This commit provides this fix [2] Without this fix, the ZBT-WD323 is unusable in OpenWRT because it power cycles every 30 seconds due to the watchdog tripping [1] https://forum.openwrt.org/t/zbt-wd323-router-power-cycles-every-30-seconds/77535/7 [2] https://forum.openwrt.org/t/zbt-wd323-images-unusable-proposed-workaround/162145/5 Signed-off-by: Joshua O'Leary <josh.oleary@mobile-power.co.uk> (cherry picked from commit 008cc836fe42577af2843730dfefd31b750c7de6)
* ramips: add support for Sercomm S1500 devicesMikhail Zhilkin2023-07-028-8/+568
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: https://github.com/openwrt/openwrt/pull/4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit 2d6784a033a994043759fa3b94c48afd5df81f88)
* ramips: sercomm.mk: preparation for Sercomm s1500 devices supportMikhail Zhilkin2023-07-021-5/+9
| | | | | | | | | | | | | | This commit moves a part of the code from the "sercomm-factory-cqr" recipe to the separate "sercomm-mkhash" recipe. This simplifies recipes and allows insert additional recipes between these code blocks (required for the future support for Beeline SmartBox PRO router). dd automatically fills the file by 0x00 if the filesize is less than offset where we start writing. We drop such dd command so we need to add --extra-padding-size 0x190 to the sercomm-pid.py call. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit f560be583a858bc3099f2b1f0aa0ddec62cfd91c)
* kernel: bump 5.15 to 5.15.119John Audia2023-07-0231-131/+131
| | | | | | | | | Build system: x86_64 Build-tested: x86_64/ACEMAGICIAN T8PLUS, ramips/tplink_archer-a6-v3 Run-tested: x86_64/ACEMAGICIAN T8PLUS, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 42cb0f0f260484ac07e3d698ebc5c546e1800051)
* mt76: fix download hashFelix Fietkau2023-07-021-1/+1
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit a3e173e00e7a7f647528ec04be432bccfb5995ad)
* mt76: update to the latest versionFelix Fietkau2023-07-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2c9c8ffe9d8c wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll 3365c80f4202 wifi: mt76: connac: fix stats->tx_bytes calculation b69d82130b47 wifi: mt76: connac: do not check WED status for non-mmio devices 1f9cd65b55d7 wifi: mt76: mt7921e: fix probe timeout after reboot 42dace9ce247 wifi: mt76: mt7921: Fix use-after-free in fw features query. 540adbb38205 wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support 150e2d0ffc0c wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi() 5b7519be2bf6 wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATE 40f6e433f747 wifi: mt76: mt76x02: remove WEP support 84ea1a24f5b5 mt76: mt7921: don't assume adequate headroom for SDIO headers 5c28e17f8c78 wifi: mt76: mt7996: fix header translation logic 2386cec860fa wifi: mt76: mt7996: enable BSS_CHANGED_MU_GROUPS support 748d4a2bfebd wifi: mt76: mt7615: enable BSS_CHANGED_MU_GROUPS support 458ad0af21be wifi: mt76: enable UNII-4 channel 177 support 7fb046011293 wifi: mt76: mt7915: fix background radar event being blocked d2a77a9954bb wifi: mt76: mt7915: report tx retries/failed counts for non-WED path f76b102b09ca wifi: mt76: mt7915: rework tx packets counting when WED is active 5637d9e37d9e wifi: mt76: mt7915: rework tx bytes counting when WED is active 34bdc7fcb4c0 wifi: mt76: report non-binding skb tx rate when WED is active d71aa7b992a3 wifi: mt76: mt7915: drop return in mt7915_sta_statistics 251c363c3087 wifi: mt76: mt7996: drop return in mt7996_sta_statistics 150bb95cb153 wifi: mt76: mt7921: do not support one stream on secondary antenna only d480c3281f21 wifi: mt76: mt7921: remove macro duplication in regs.h 18b1027e5b6e wifi: mt76: mt7915: move mib_stats structure in mt76.h 25ec4b91020e wifi: mt76: mt7996: rely on mib_stats shared definition 6541afa88b3b wifi: mt76: mt7921: rely on mib_stats shared definition eeb60eb9a5a0 wifi: mt76: mt7915: add support for MT7981 [sync with upstream] d5b7e6a3d735 wifi: mt76: mt7921e: report tx retries/failed counts in tx free event f0f19cea6646 wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU edd8a830f6e3 wifi: mt76: add tx_nss histogram to ethtool stats e48235308b3e wifi: mt76: mt7915: accumulate mu-mimo ofdma muru stats a729242363d9 wifi: mt76: mt7921: fix non-PSC channel scan fail 8d52436ee0cd wifi: mt76: mt7921: Support temp sensor d152c8688c14 wifi: mt76: mt7915: disable WFDMA Tx/Rx during SER recovery d07785c344ac wifi: mt76: mt7996: disable WFDMA Tx/Rx during SER recovery 2a19784137f9 wifi: mt76: mt7921: make mt7921_mac_sta_poll static da8e33a15e71 wifi: mt76: mt7915: fix command timeout in AP stop period cc58d5c4a9c9 mt76: mt7996: rely on mt76_sta_stats in mt76_wcid 98a37c82a373 wifi: mt76: mt7921: get rid of MT7921_RESET_TIMEOUT marco ece724cf562b wifi: mt76: mt7996: move radio ctrl commands to proper functions 527cbbc5ede7 wifi: mt76: connac: add support for dsp firmware download 44e323340637 wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info command 63f0053df07a wifi: mt76: mt7996: enable VHT extended NSS BW feature e1bb4ef7b2bb wifi: mt76: connac: add support to set ifs time by mcu command 080ca19cc686 wifi: mt76: mt7996: use correct phy for background radar event 2c163f1812a3 wifi: mt76: mt7996: fix WA event ring size b511a437ace4 wifi: mt76: mt7996: add muru support ece67c98dc1c wifi: mt76: mt7996: increase tx token size 7c2515d85117 wifi: mt76: mt7921e: fix init command fail with enabled device 30706095c566 wifi: mt76: mt7915: move sta_poll_list and sta_poll_lock in mt76_dev b06ed10ee271 wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock b59bdae339de wifi: mt76: mt7615: rely on shared sta_poll_list and sta_poll_lock 6da2e0e4ef54 wifi: mt76: mt7996: rely on shared sta_poll_list and sta_poll_lock b19d3ad88e8b wifi: mt76: mt7921: rely on shared sta_poll_list and sta_poll_lock 595b033275a3 wifi: mt76: mt7915: move poll_list in mt76_wcid 16fcad171849 wifi: mt76: mt7603: rely on shared poll_list field e19f84091d2e wifi: mt76: mt7615: rely on shared poll_list field b87e4dad1e84 wifi: mt76: mt7996: rely on shared poll_list field 6d7950e258d0 wifi: mt76: mt7921: rely on shared poll_list field f5c5eece5038 wifi: mt76: move ampdu_state in mt76_wcid 7e44467469fe mt76: connac: move more mt7921/mt7915 mac shared code in connac lib 39a70710ddcd wifi: mt76: move rate info in mt76_vif 0dc4326991df wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h 29cfabbb4b90 wifi: mt76: connac: add connac3 mac library d60b401867f4 linux-firmware: update firmware for MT7922 WiFi device 9404601a6c97 linux-firmware: update firmware for MT7922 WiFi device 2f851902d6b1 linux-firmware: update firmware for MT7921 WiFi device f36b921692b9 Revert "wifi: mt76: mt76x02: remove WEP support c50be0b54cdd wifi: mt76: mt7915: fix capabilities in non-AP mode d7d7479b00e9 wifi: mt7915: fix beaconing in mesh mode 1377f586c6f5 wifi: mt7915: move capability check to start_ap Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 01885bc6a33dbfa6f3c9e97778fd8f4f60e2514f) (cherry picked from commit 86ebaef5d427c5732847168f6ceeda12bf528414)
* mediatek: add support for Mercusys MR90X v1Mikhail Zhilkin2023-07-0110-0/+361
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Mercusys MR90X(EU) v1 router. Device specification -------------------- SoC Type: MediaTek MT7986BLA, Cortex-A53, 64-bit RAM: MediaTek MT7986BLA (512MB) Flash: SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB) Ethernet: MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8) Ethernet: 1x2.5Gbe (WAN/LAN 2.5Gbps), 3xGbE (WAN/LAN 1Gbps, LAN1, LAN2) WLAN 2g: MediaTek MT7975N, b/g/n/ax, MIMO 4x4 WLAN 5g: MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4 LEDs: 1 orange and 1 green status LEDs, 4 green gpio-controlled LEDs on ethernet ports Button: 1 (Reset) USB ports: No Power: 12 VDC, 2 A Connector: Barrel Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI slots contain "seconduboot" (also U-Boot 2022.01-rc4) Serial console (UART) --------------------- V +-------+-------+-------+-------+ | +3.3V | GND | TX | RX | +---+---+-------+-------+-------+ | +--- Don't connect The R3 (TX line) and R6 (RX line) are absent on the PCB. You should solder them or solder the jumpers. Installation (UART) ------------------- 1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2 2. Attach UART, switch on the router and interrupt the boot process by pressing 'Ctrl-C' 3. Load and run OpenWrt initramfs image: tftpboot initramfs-kernel.bin bootm 4. Once inside OpenWrt, set / update env variables: fw_setenv baudrate 115200 fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit" fw_setenv fdtcontroladdr 5ffc0e70 fw_setenv ipaddr 192.168.1.1 fw_setenv loadaddr 0x46000000 fw_setenv mtdids "spi-nand0=spi-nand0" fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)" fw_setenv netmask 255.255.255.0 fw_setenv serverip 192.168.1.2 fw_setenv stderr serial@11002000 fw_setenv stdin serial@11002000 fw_setenv stdout serial@11002000 fw_setenv tp_boot_idx 0 5. Run 'sysupgrade -n' with the sysupgrade OpenWrt image Installation (without UART) --------------------------- 1. Login as root via SSH (router IP, port 20001, password - your web interface password) 2. Open for editing /etc/hotplug.d/iface/65-iptv (e.g., using WinSCP and SSH settings from the p.1) 3. Add a newline after "#!/bin/sh": telnetd -l /bin/login.sh 4. Save "65-iptv" file 5. Toggle "IPTV/VLAN Enable" checkbox in the router web interface and save 6. Make sure that telnetd is running: netstat -ltunp | grep 23 7. Login via telnet to router IP, port 23 (no username and password are required) 8 Upload OpenWrt "initramfs-kernel.bin" to the "/tmp" folder of the router (e.g., using WinSCP and SSH settings from the p.1) 9. Stock busybox doesn't contain ubiupdatevol command. Hence, we need to download and upload the full version of busybox to the router. For example, from here: https://github.com/xerta555/Busybox-Binaries/raw/master/busybox-arm64 Upload busybox-arm64 to the /tmp dir of the router and run: in the telnet shell: cd /tmp chmod a+x busybox-arm64 10. Check "initramfs-kernel.bin" size: du -h initramfs-kernel.bin 11. Delete old and create new "kernel" volume with appropriate size (greater than "initramfs-kernel.bin" size): ubirmvol /dev/ubi0 -N kernel ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB 12. Write OpenWrt "initramfs-kernel.bin" to the flash: ./busybox-arm64 ubiupdatevol /dev/ubi0_1 /tmp/initramfs-kernel.bin 13. u-boot-env can be empty so lets create it (or overwrite it if it already exists) with the necessary values: fw_setenv baudrate 115200 fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit" fw_setenv fdtcontroladdr 5ffc0e70 fw_setenv ipaddr 192.168.1.1 fw_setenv loadaddr 0x46000000 fw_setenv mtdids "spi-nand0=spi-nand0" fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)" fw_setenv netmask 255.255.255.0 fw_setenv serverip 192.168.1.2 fw_setenv stderr serial@11002000 fw_setenv stdin serial@11002000 fw_setenv stdout serial@11002000 fw_setenv tp_boot_idx 0 14. Reboot to OpenWrt initramfs: reboot 15. Login as root via SSH (IP 192.168.1.1, port 22) 16. Upload OpenWrt sysupgrade.bin image to the /tmp dir of the router 17. Run sysupgrade: sysupgrade -n /tmp/sysupgrade.bin Recovery -------- 1. Press Reset button and power on the router 2. Navigate to U-Boot recovery web server (http://192.168.1.1/) and upload the OEM firmware Recovery (UART) --------------- 1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2 2. Attach UART, switch on the router and interrupt the boot process by pressing 'Ctrl-C' 3. Load and run OpenWrt initramfs image: tftpboot initramfs-kernel.bin bootm 4. Do what you need (restore partitions from a backup, install OpenWrt etc.) Stock layout ------------ 0x000000000000-0x000000200000 : "boot" 0x000000200000-0x000000300000 : "u-boot-env" 0x000000300000-0x000003500000 : "ubi0" 0x000003500000-0x000006700000 : "ubi1" 0x000006700000-0x000006f00000 : "userconfig" 0x000006f00000-0x000007300000 : "tp_data" ubi0/ubi1 format ---------------- U-Boot at boot checks that all volumes are in place: +-------------------------------+ | Volume Name: uboot Vol ID: 0| | Volume Name: kernel Vol ID: 1| | Volume Name: rootfs Vol ID: 2| +-------------------------------+ MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | label | 00:eb:xx:xx:xx:be | label | | LAN | 00:eb:xx:xx:xx:be | label | | WAN | 00:eb:xx:xx:xx:bf | label+1 | | WLAN 2g | 00:eb:xx:xx:xx:be | label | | WLAN 5g | 00:eb:xx:xx:xx:bd | label-1 | +---------+-------------------+-----------+ label MAC address was found in UBI partition "tp_data", file "default-mac". OEM wireless eeprom is also there (file "MT7986_EEPROM.bin"). Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit e4fe3097ef6a961874b66932a0ac4be18070630a) [Fix merging conflict] Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ipq4019: add support for ZTE MF287+ aka DreiNeoAndreas Böhler2023-07-015-0/+410
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZTE MF287+ is a LTE router used (exclusively?) by the network operator "3". The MF287 (i.e. non-plus aka 3Neo) is also supported (the only difference is the LTE modem) Specifications ============== SoC: IPQ4018 RAM: 256MiB Flash: 8MiB SPI-NOR + 128MiB SPI-NAND LAN: 4x GBit LAN LTE: ZTE Cat12 (MF287+) / ZTE Cat6 (MF287) WiFi: 802.11a/b/g/n/ac SoC-integrated MAC addresses ============= LAN: from config + 2 WiFi 1: from config WiFi 2: from config + 1 Installation ============ Option 1 - TFTP --------------- TFTP installation using UART is preferred. Disassemble the device and connect serial. Put the initramfs image as openwrt.bin to your TFTP server and configure a static IP of 192.168.1.100. Load the initramfs image by typing: setenv serverip 192.168.1.100 setenv ipaddr 192.168.1.1 tftpboot 0x82000000 openwrt.bin bootm 0x82000000 From this intiramfs boot you can take a backup of the currently installed partitions as no vendor firmware is available for download: ubiattach -m14 cat /dev/ubi0_0 > /tmp/ubi0_0 cat /dev/ubi0_1 > /tmp/ubi0_1 Copy the files /tmp/ubi0_0 and /tmp/ubi0_1 somewhere save. Once booted, transfer the sysupgrade image and run sysupgrade. You might have to delete the stock volumes first: ubirmvol /dev/ubi0 -N ubi_rootfs ubirmvol /dev/ubi0 -N kernel Option 2 - From stock firmware ------------------------------ The installation from stock requires an exploit first. The exploit consists of a backup file that forces the firmware to download telnetd via TFTP from 192.168.0.22 and run it. Once exploited, you can connect via telnet and login as admin:admin. The exploit will be available at the device wiki page. Once inside the stock firmware, you can transfer the -factory.bin file to /tmp by using "scp" from the stock frmware or "tftp". ZTE has blocked writing to the NAND. Fortunately, it's easy to allow write access - you need to read from one file in /proc. Once done, you need to erase the UBI partition and flash OpenWrt. Before performing the operation, make sure that mtd13 is the partition labelled "rootfs" by calling "cat /proc/mtd". Complete commands: cd /tmp tftp -g -r factory.bin 192.168.0.22 cat /proc/driver/sensor_id flash_erase /dev/mtd13 0 0 dd if=/tmp/factory.bin of=/dev/mtdblock13 bs=131072 Afterwards, reboot your device and you should have a working OpenWrt installation. Restore Stock ============= Option 1 - via UART ------------------- Boot an OpenWrt initramfs image via TFTP as for the initial installation. Transfer the two backed-up files to your box to /tmp. Then, run the following commands - replace $kernel_length and $rootfs_size by the size of ubi0_0 and ubi0_1 in bytes. ubiattach -m 14 ubirmvol /dev/ubi0 -N kernel ubirmvol /dev/ubi0 -N rootfs ubirmvol /dev/ubi0 -N rootfs_data ubimkvol /dev/ubi0 -N kernel -s $kernel_length ubimkvol /dev/ubi0 -N ubi_rootfs -s $rootfs_size ubiupdatevol /dev/ubi0_0 /tmp/ubi0_0 ubiupdatevol /dev/ubi0_1 /tmp/ubi0_1 Option 2 - from within OpenWrt ------------------------------ This option requires to flash an initramfs version first so that access to the flash is possible. This can be achieved by sysupgrading to the recovery.bin version and rebooting. Once rebooted, you are again in a default OpenWrt installation, but no partition is mounted. Follow the commands from Option 1 to flash back to stock. LTE Modem ========= The LTE modem is similar to other ZTE devices and controls some more LEDs and battery management. Configuring the connection using uqmi works properly, the modem provides three serial ports and a QMI CDC ethernet interface. Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit f70ee53b08466f612546f699c556cbdaa39e1466)
* ipq40xx: Enable gpio-restart in kernel configurationAndreas Böhler2023-07-011-0/+1
| | | | | | | | Some ZTE devices require the gpio-restart driver to support restarting the LTE modem along with OpenWrt Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit 9ffdaa7fa1478146b5d8c77d4b3a5d4d4007a487)
* uboot-envtools: Add u-boot env config for GL-MT3000Jianhui Zhao2023-07-011-0/+3
| | | | | | | | | This commit add u-boot env config for GL-MT3000, so that we can use fw_printenv to print u-boot env and use fw_setenv to set u-boot env in GL-MT3000. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com> (cherry picked from commit 6892603efa11603c6f365bee1cf94e98336d72aa)
* OpenWrt v23.05.0-rc2: revert to branch defaultsHauke Mehrtens2023-06-285-11/+9
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc2: adjust config defaultsv23.05.0-rc2Hauke Mehrtens2023-06-285-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* filogic: add support for Netgear WAX220Flole Systems2023-06-266-0/+324
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7986 RAM: 1024MB DDR3 FLASH: 128MB SPI-NAND (Winbond) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect the TFTP server to the WAX220. Conect to the serial console, interrupt the autoboot process by pressing '0' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.2.1 $ setenv serverip 192.168.2.2 $ tftpboot openwrt.bin $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: Flole Systems <flole@flole.de> Signed-off-by: Stefan Agner <stefan@agner.ch> (cherry picked from commit 984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b)
* uhttpd: update to latest git HEADHauke Mehrtens2023-06-251-3/+3
| | | | | | | 34a8a74 uhttpd/file: fix string out of buffer range on uh_defer_script Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 7a6f6b812632a5983cd34ab5c41271d5d4de5fbf)
* kernel: bump 5.15 to 5.15.118John Audia2023-06-2539-50/+50
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 1f5fce27c195373fedcf233a48470de97752058f)
* ipq40xx: meraki-mr33, meraki-mr74: disable image generationLech Perczak2023-06-251-0/+2
| | | | | | | | | | | | | | After migrating to kernel 5.15, upgrading causes the units to become soft-bricked, hanging forever at the kernel startup. Kernel size limitation of 4000000 bytes is suspected here, but this is not fully confirmed. Disable the images to protect users from inadvertent bricking of units, because recovery of those is painful with Cisco's U-boot, until the root cause is found and fixed. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 9d64cc068fbb15d9e6498c1eba79851823b2f4f5)
* ramips: fix lan leds for Wavlink WL-WN535K1Davide Fioravanti2023-06-253-5/+5
| | | | | | | | | | Previously both lan1 and lan2 leds were wrongly labelled as lan2. Moreover they were connected to the wrong lan port. Fixes 8fde82095ba0 ("ramips: add support for Wavlink WL-WN535K1") Reported-by: Nicolò Maria Semprini <nicosemp@gmail.com> Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> (cherry picked from commit c71dada92654a53c63bbc5bebcc40fe924750ed7)
* ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)Kim DoHyoung2023-06-253-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G) modems. Specifications: * SoC: MediaTek MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * Wi-Fi: * MediaTek MT7603E : 2.4Ghz * MediaTek MT7613BE : 5Ghz * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * M.2: 1x slot with USB&SIM * EM7455/EM12-G/EM160R/RM500Q-AE * USB: 1x 3.0 Type-A port * External storage: 1x microSD (SDXC) slot * UART: console (115200 baud) * LED: * 1 power indicator * 1 WLAN 2.4G controlled (wlan 2G) * 3 SoC controlled (wlan 5G, wwan, internet) * 5 per Eth phy (4xLAN + WAN) MAC Addresses: * LAN : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex)) * WAN : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex)) * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex)) * 5 GHz : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex)) Installation: * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Recovery Mode: * Press reset button, power up the device, wait for about 10sec. * Upload sysupgrade image through the firmware recovery mode web page at 192.168.1.1. Signed-off-by: Kim DoHyoung <azusahmr@k-on.kr> (cherry picked from commit 0bbd5699c81d6887c4d895e85b56d8c23b1211ec)
* odhcpd: bump to latest git HEADChristian Marangi2023-06-241-3/+3
| | | | | | | | 5211264 odhcpd: add support for dhcpv6_pd_min_len parameter c6bff6f router: Add PREF64 (RFC 8781) support Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit acd9981b4ef750544202df9d9e2d0143a6dfd478)
* netfilter: fix typo in nf-socket and nf-tproxy kconfigChristian Marangi2023-06-231-2/+2
| | | | | | | | | Fix a typo where the wrong KCONFIG was used and fix selecting the correct kernel config option to use these packages. Fixes: 4f443c885ded ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 3ebebf08be950a8a0f3bf5b2c3db910621f2cc21)
* mac80211: always use mac80211 loss detectionDavid Bauer2023-06-231-0/+36
| | | | | | | | | | | | | ath10k does not report excessive loss in case of broken block-ack sessions. The loss is communicated to the host-os, but ath10k does not trigger a low-ack events by itself. The mac80211 framework for loss detection however detects this circumstance well in case of ath10k. So use it regardless of ath10k's own loss detection mechanism. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit ed816f6ba8b5e3df609e5fc53f7bcb09bdaa16be)
* ath79: add support for Aruba AP-115David Bauer2023-06-234-0/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware ======== CPU Qualcomm Atheros QCA9558 RAM 256MB DDR2 FLASH 2x 16M SPI-NOR (Macronix MX25L12805D) WIFI Qualcomm Atheros QCA9558 Atheros AR9590 Installation ============ 1. Attach to the serial console of the AP-105. Interrupt autoboot and change the U-Boot env. $ setenv rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x80060000 ap115.bin; go 0x80060000" $ setenv fb_openwrt "bank 1; cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000" $ setenv bootcmd "run fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap105.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1b467a902ec9b8bf29805c6928627e8bbad0f14c)
* bmips: add support for Arcadyan AR7516Daniel González Cabanelas2023-06-225-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry-picked from df8e4b6c2e6440bc9a31467de1739c69c328e391)
* kernel: remove bridge offload hackEtienne Champetier2023-06-201-846/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch initially introduced in 94b4da9b4aaded6ed8a5bd93bf38a7c92753fe68 breaks mvebu devices when using vlan filtering with kernel 5.15 or 6.1, it was working ok in 5.10. With this patch, frame that should exit untagged from the switch exit tagged. Running 'tcpdump -Q out -evnnli eth1' (eth1 being the dsa interface) - with the hack, frame is sent directly to the destination port 4 with VID 2, so the switch leave the tag as instructed: 11:22:33:44:55:66 > 77:88:99:aa:bb:cc, Marvell EDSA ethertype 0xdada (Unknown), rsvd 0 0, mode From CPU, target dev 0, port 4, tagged, VID 2, FPri 0, ethertype ARP (0x0806), length 50: Ethernet (len 6), IPv4 (len 4), Request who-has 5.6.7.8 tell 1.2.3.4, length 28 - without the hack, frame is sent to the switch that performs the forwarding decision and untagging: 11:22:33:44:55:66 > 77:88:99:aa:bb:cc, Marvell EDSA ethertype 0xdada (Unknown), rsvd 0 0, mode Forward, dev 1, port 0, tagged, VID 2, FPri 0, ethertype ARP (0x0806), length 50: Ethernet (len 6), IPv4 (len 4), Request who-has 5.6.7.8 tell 1.2.3.4, length 28 Removing this patch makes my Turris Omnia usable with vlan filtering, ie wifi device can talk to wired device again. Using kernel 5.15 some broadcast/multicast traffic is still leaked (on a VLAN 2 access port I see tagged VLAN 3 frame), using kernel 6.1 fixes that. People needing the extra performance should try the bridger package. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> (cherry picked from commit 244328b19c3943bb145b72f0d85062f535e56fbd)
* bmips: add support for NuCom R5010UNv2Daniel González Cabanelas2023-06-195-2/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 6cb3328b4fd4939f3800d4be9d52744b753de1b6)
* bmips: enable the data Read Ahead Cache for BMIPS4350Daniel González Cabanelas2023-06-191-0/+42
| | | | | | | | | | | | | | The data RAC is left disabled by the bootloader in some SoCs, at least in the core it boots from. Enabling this feature increases the performance up to +30% depending on the task. The kernel enables the whole RAC unconditionally on BMIPS3300 CPUs. Enable the data RAC in a similar way also for BMIPS4350. Tested on DGND3700 v1 (BCM6368) and HG556a (BCM6358). Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 6d1265b14850abaf8980e5cebef3e559b1fdcfb9)
* bmips: fix DMA RAC flushÁlvaro Fernández Rojas2023-06-191-0/+84
| | | | | | | BMIPS_GET_CBR() returns an invalid address on some SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 62cdca25edc7e02249a7dd01c2218ee83e6ed145)
* ramips: Add support for Beeline SmartBox TURBO+Maximilian Weinmann2023-06-177-9/+320
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Beeline Smart Box TURBO+ (Serсomm S3 CQR) router. Device specification -------------------- SoC Type: MediaTek MT7621AT (880 MHz, 2 cores) RAM (Nanya NT5CC64M16GP): 128 MiB Flash (Macronix MX30LF1G18AC): 128 MiB Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2 Wireless 5 GHz (MT7615N): a/n/ac, 4x4 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) USB ports: 1xUSB3.0 Buttons: 2 button (reset, wps) LEDs: Red, Green, Blue Zigbee (EFR32MG1B232GG): 3.0 Stock bootloader: U-Boot 1.1.3 Power: 12 VDC, 1.5 A Installation (fw 2.0.9) ----------------------- 1. Login to the web interface under SuperUser (root) credentials. Password: SDXXXXXXXXXX, where SDXXXXXXXXXX is serial number of the device written on the backplate stick. 2. Navigate to Setting -> WAN. Add: Name - WAN1 Connection Type - Static IP Address - 172.16.0.1 Netmask - 255.255.255.0 Save -> Apply. Set default: WAN1 3. Enable SSH and HTTP on WAN. Setting -> Remote control. Add: Protocol - SSH Port - 22 IP Address - 172.16.0.1 Netmask - 255.255.255.0 WAN Interface - WAN1 Save ->Apply Add: Protocol - HTTP Port - 80 IP Address - 172.16.0.1 Netmask - 255.255.255.0 WAN interface - WAN1 Save -> Apply 4. Set up your PC ethernet: Connection Type - Static IP Address - 172.16.0.2 Netmask - 255.255.255.0 Gateway - 172.16.0.1 5. Connect PC using ethernet cable to the WAN port of the router 6. Connect to the router using SSH shell under SuperUser account 7. Make a mtd backup (optional, see related section) 8. Change bootflag to Sercomm1 and reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 reboot 9. Login to the router web interface under admin account 10. Remove dots from the OpenWrt factory image filename 11. Update firmware via web using OpenWrt factory image Revert to stock --------------- Change bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 mtd backup ---------- 1. Set up a tftp server (e.g. tftpd64 for windows) 2. Connect to a router using SSH shell and run the following commands: cd /tmp for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \ tftp -l mtd$i -p 172.16.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done tftp -l mtd.md5 -p 171.16.0.2 Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery MAC Addresses (fw 2.0.9) ------------------------ +-----+------------+---------+ | use | address | example | +-----+------------+---------+ | LAN | label | *:e8 | | WAN | label + 1 | *:e9 | | 2g | label + 4 | *:ec | | 5g | label + 5 | *:ed | +-----+------------+---------+ The label MAC address was found in Factory 0x21000 Factory image format -------------------- +---+-------------------+-------------+--------------------+ | # | Offset | Size | Description | +---+-------------------+-------------+--------------------+ | 1 | 0x0 | 0x200 | Tag Header Factory | | 2 | 0x200 | 0x100 | Tag Header Kernel1 | | 3 | 0x300 | 0x100 | Tag Header Kernel2 | | 4 | 0x400 | SIZE_KERNEL | Kernel | | 5 | 0x400+SIZE_KERNEL | SIZE_ROOTFS | RootFS(UBI) | +---+-------------------+-------------+--------------------+ Co-authored-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Maximilian Weinmann <x1@disroot.org> (cherry picked from commit 8fcfb21b16e7537b9a871a1f67cb218c6be93149)
* scripts: sercomm-kernel-header.py: improve compatibilityMikhail Zhilkin2023-06-171-3/+3
| | | | | | | | | | | | | | This improves compatibility with the elder stock firmwares of the following devices, which have not yet been merged into OpenWrt: - Beeline SmartBox Pro - Beeline SmartBox Turbo+ - WiFire S1500.NBN Without this, OpenWrt factory image installation may fail. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Maximilian Weinmann <x1@disroot.org> (cherry picked from commit 35a4418d3966ccf6229916b0021bd18871ef22dd)
* openssl: passing cflags to configureJitao Lu2023-06-171-1/+2
| | | | | | | | | openssl sets additional cflags in its configuration script. We need to make it aware of our custom cflags to avoid adding conflicting cflags. Fixes: #12866 Signed-off-by: Jitao Lu <dianlujitao@gmail.com> (cherry picked from commit 51f57e7c2dd2799e34036ec74b3436bf490fade0)
* rockchip: fix setup network config for nanopi r2cTianling Shen2023-06-171-0/+1
| | | | | | | | | Without it the WAN port won't be initialized properly. Fixes: 8f578c15b314 ("rockchip: add NanoPi R2C support") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d312f12b1a6ee41e7bf1e07ec0349e141c07b92e)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:30:55 +0000