aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* nettle: Update to 3.5.1Daniel Engberg2019-08-091-4/+4
| | | | | | | Update (lib)nettle to 3.5.1 Bump ABI_VERSION Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ath79: add missing IMAGE_SIZE for Comfast WR650AC v1/v2Adrian Schmutzler2019-08-091-0/+2
| | | | | | | | When adding support in 9ed272fe9500 ("ath79: add support for Comfast WR650AC v1/v2"), IMAGE_SIZE has not been added to device definition. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: ag71xx: init rings with GFP_KERNELKoen Vandeputte2019-08-091-1/+1
| | | | | | | ar71xx got lost during final rebase .. Fixes: b417a0c48d63 ("ar71xx/ath79: ag71xx: init rings with GFP_KERNEL") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: ag71xx: init rings with GFP_KERNELKoen Vandeputte2019-08-091-1/+1
| | | | | | | | | | | | | | | Upstream commit 246902bdf562d45ea3475fac64c93048a7a39f01 Which contains following explanation: -- There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. -- Looking at the code, all other descriptors also use plain GFP_KERNEL Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: ag71xx: fix sleep in atomicKoen Vandeputte2019-08-092-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When enabling atomic-sleep-debugging options in the kernel, following splat is seen when disabling the interface (which happens on boot): [ 10.892878] eth0: link down [ 10.896788] BUG: sleeping function called from invalid context at net/core/dev.c:5563 [ 10.904730] in_atomic(): 1, irqs_disabled(): 1, pid: 425, name: ip [ 10.911004] 2 locks held by ip/425: [ 10.914539] #0: (rtnl_mutex){....}, at: [<80377474>] rtnetlink_rcv_msg+0x2d8/0x380 [ 10.922441] #1: (&(&ag->lock)->rlock){....}, at: [<80330158>] ag71xx_hw_disable+0x24/0x94 [ 10.930976] CPU: 0 PID: 425 Comm: ip Not tainted 4.14.136 #0 [ 10.936716] Stack : 805e0000 80589228 80557404 876998ec 80610000 80610000 87cdcafc 805b5327 [ 10.945233] 80551534 000001a9 8061386c 87699ccc 87cfb180 00000001 876998a0 84f70903 [ 10.953751] 00000000 00000000 80b00000 8769979c 6a7407fa 00000000 00000007 00000000 [ 10.962270] 000000b7 16d0954a 000000b6 00000000 80000000 87cb658c 87cb65b0 00000001 [ 10.970787] 8046f97c 87699ccc 87cfb180 87ff2810 00000003 802ce724 0806e098 80610000 [ 10.979306] ... [ 10.981797] Call Trace: [ 10.984287] [<8006cb0c>] show_stack+0x58/0x100 [ 10.988814] [<800aab34>] ___might_sleep+0x100/0x120 [ 10.993774] [<8035c434>] napi_disable+0x30/0xd8 [ 10.998377] [<80330198>] ag71xx_hw_disable+0x64/0x94 [ 11.003418] [<8033069c>] ag71xx_stop+0x24/0x38 [ 11.007959] [<80359e30>] __dev_close_many+0xcc/0x104 [ 11.013009] [<80362eac>] __dev_change_flags+0xc8/0x1ac [ 11.018227] [<80362fb8>] dev_change_flags+0x28/0x70 [ 11.023182] [<80376890>] do_setlink+0x31c/0x91c [ 11.027786] [<80379360>] rtnl_newlink+0x3ec/0x7f8 [ 11.032563] [<80377498>] rtnetlink_rcv_msg+0x2fc/0x380 [ 11.037799] [<8039a734>] netlink_rcv_skb+0xd4/0x178 [ 11.042754] [<80399d10>] netlink_unicast+0x168/0x250 [ 11.047796] [<8039a2d4>] netlink_sendmsg+0x3d8/0x434 [ 11.052841] [<8033f0e4>] ___sys_sendmsg+0x1dc/0x290 [ 11.057794] [<80340140>] __sys_sendmsg+0x54/0x84 [ 11.062495] [<8007212c>] syscall_common+0x34/0x58 This is caused by calling napi_disable() while holding the spinlock. Fix it by omitting the spinlock, which is not required here Extensively tested on GL-MiFi, RB-912 and RB-922 hardware Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.65Koen Vandeputte2019-08-098-15/+15
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.137Koen Vandeputte2019-08-096-10/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.188Koen Vandeputte2019-08-096-10/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: fix identation errors in 01_ledsDavid Bauer2019-08-091-7/+7
| | | | | | Fix the identation of 01_leds to keep the style of the file consistent. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add missing IMAGE_SIZE for Comfast E314N-v2Adrian Schmutzler2019-08-091-0/+1
| | | | | | | | When adding support in abbbecaa73dc ("ath79: add support for Comfast E314N-v2"), IMAGE_SIZE has not been added to device definition. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix whitespace errors from adding D-Link DIR-842 C3Adrian Schmutzler2019-08-094-13/+13
| | | | | | | | | We completely overlooked whitespace errors when reviewing 796ad2f7ef6f ("ath79: add support for D-Link DIR-842 C3"). Fix them and and also fix Makefile indent for C1/C2. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Comfast WR650AC v1/v2Joan Moreau2019-08-096-3/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a dual band 11a/11n router with 1x wan and 4x gig lan ports. There are two versions of this router which can be identified through the factory web interface, v1 has 128mb ram and a uboot size of 128k, v2 has 256mb ram and a uboot size of 256k, the remaining hardware and PCB markings are the same. Short specification: SoC: Qualcomm Atheros QCA9558 - 720 MHz Switch: Atheros AR8327 Second radio : Qualcomm Atheros QCA9880 802.11ac 4 LAN/1 WAN 1000Mps Ethernet 256 MB of RAM (DDR2) 16 MB of FLASH 3x2.4 GHz, 3x5GHz antennas Steps to install : Option A : Use vendor UI Option B (if A is not working) : (a) Download 'backup' from vendor UI and rename it backup.tar.gz (b) Open the archive, and update the root password in /etc/shadow by '$1$9wX3HGfB$X5Sb3kqzzBLdKRUR2kfFd0' (c) 'Restore' from the archive using the vendor UI. Root password is now 'aaa' (d) Scp the firwmware to the device: $ scp <openwrt-sysupgrade>.bin root@192.168.1.1:/ (d) ssh to the device and flash the firmware: $ cd / $ mtd -e firmware -r write <openwrt-sysupgrade>.bin firmware Signed-off-by: Gareth Parker <gareth41@orcon.net.nz> Signed-off-by: Ding Tengfei <dtf@comfast.cn> Signed-off-by: Joan Moreau <jom@grosjo.net> [reformatted commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* brcm2708: bcm2711: remove unneeded boot fileÁlvaro Fernández Rojas2019-08-091-2/+1
| | | | | | | bootcode.bin isn't needed for RPi 4B since it's stored on a SPI-attached EEPROM. More info: https://www.raspberrypi.org/documentation/hardware/raspberrypi/booteeprom.md Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath79: add support for Comfast E314N-v2Joan Moreau2019-08-094-0/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Taken code from https://patchwork.ozlabs.org/patch/884850/ that was never pushed by the author, and adapted to ath79. The Comfast E314N-V2 is a 2.4 GHz 2x2 radio with a built-in directional antenna and a second Ethernet port - very similar to the Ubiquiti NanoStation M2. The Ethernet port features a pass-through PoE capability, enabled or disabled with a slide switch. Specifications : - System-On-Chip: Qualcomm/Atheros QCA9531 - CPU/Speed: 650 MHz - Flash size: 8 MiB - RAM: 64 MiB - 2 Ethernet 1Gbp - 1 reset button - 1 switch to choose PoE from LAN or Wan. 48Vdc - Wifi 2.4 Ghz (b/g/n) - UART inside the box (3.3V, pins marked on the PCB) Firmware can be flashed on these units by the following method: 1.) Apply power to the unit 2.) Immediately AFTER applying power, hold down the reset button 3.) The WAN, LAN, and wireless lights will flash - wait three seconds (three flashes) and then release the button. 4.) After a second, the lights will flutter quickly and the unit will be visible at 192.168.1.1. A web page will be available to enable quick and simple uploading and flashing of firmware. During the boot process, these units also look for a tftp server at 192.168.1.10. If one is present, the firmware can be uploaded as a file called firmware-auto.bin Signed-off-by: Joan Moreau <jom@grosjo.net> [wrapped commit message - fix commit title capitalization] Signed-off-by: David Bauer <mail@david-bauer.net>
* comgt-ncm: add driver dependencies againVincent Wiemann2019-08-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In the commit 623716dd4318 ("comgt-ncm: Fix NCM protocol") the dependencies to vendor NCM drivers were removed, because: > comgt-ncm should not depend on the USB-serial-related kernel modules, > as the cdc-wdm control device works without them. There is also no need > to depend on kmod-huawei-cdc-ncm, since other manufacturers (like > Ericsson and Samsung) which use other kernel modules should also be > supported. From a user-perspective this does not make sense, as installing comgt-ncm (or luci-proto-ncm) should install all needed dependencies for using such a device. Furthermore depending on kmod-huawei-cdc-ncm does not mean that Ericsson and Samsung devices can't be supported. By the way it seems that Ericsson and Samsung devices never used NCM, but act as serial modems. Thus this commit adds the dependencies again. Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> [fixed title capitalization, formatted commit message, renamed Sony-Ericsson to Ericsson] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for HiWiFi HC5761ADENG Qingfang2019-08-084-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | HiWiFi HC5761A is an "MT7628AN variant" of HC5761 Specifications: - MediaTek MT7628AN 580MHz - 128 MB DDR2 RAM - 16 MB SPI Flash - 2.4G MT7628AN 802.11bgn 2T2R 300Mbps - 5G MT7610EN 802.11ac 433Mbps - 3x 10/100 Mbps Ethernet Flash instruction: 1. Get SSH access to the router 2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one 3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP 4. Run `mtd write /tmp/<filename> firmware` 5. reboot Known bug: - SD slot does not work (See PR 1500) Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: improve support for HiWiFi HC5661A and HC5861BDENG Qingfang2019-08-083-8/+25
| | | | | | | | | | | | | HC5661A: - Fix pinctrl - Fix image size (15808k) - Use switch trigger for WAN LED Both: - Use tpt LED trigger for wireless - Explicitly disable USB nodes Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: add HC5X61A.dtsi for HiWiFi MT7628AN boardsDENG Qingfang2019-08-083-186/+104
| | | | | | | HiWiFi has several MT7628AN routers which have similar specs Add HC5X61A.dtsi to include them, like HC5X61.dtsi (for MT7620A) Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath79: add support for PISEN WMB001NChuanhong Guo2019-08-085-0/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: AR9341 - RAM: 64M - Flash: 16M - Ethernet: 1 * FE port - WiFi: ar934x-wmac - Sound: WM8918 DAC 1 * 3.5mm headphone jack 2 * RCA connectors for speakers 1 * SPDIF out - USB: 1 * USB2.0 port Flash instruction: Upload generated factory image via vendor's web interface. Notes: A. Audio stuff: 1. Since AR934x, all pins for peripheral blocks can be mapped to any available GPIOs. We currently don't have a PCM/I2S driver for AR934x so pinmux for i2s and SPDIF are bound to i2c gpio node. This should be moved into I2S node when a PCM/I2S driver is available. 2. The i2c-gpio node is for WM8918. DT binding for it can't be added currently due to a missing clock from I2S PLL. B. Factory image: Image contains a image header and a tar.gz archive. 1. Header: A 288 byte header that has nothing to do with appended tarball. Format: 0x0-0x7 and 0x18-0x1F: magic values 0x20: Model number string 0xFC: Action string. It's either "update" or "backup" 0x11C: A 1 byte checksum. It's XOR result of 0x8-0x11B Firmware doesn't care about the rest of the header as long as checksum result is correct. The same header is used for backup and update routines so the magic values and model number can be obtained by generating a backup bin and grab values from it. 2. Tarball: It contains two files named uImage and rootfs, which will be flashed into corresponding mtd partition. Writing a special utility that can only output a fixed binary blob is overkill so factory image header is placed under image/bin instead. C. LED The wifi led has "Wi-Fi" marked on the case but vendor's firmware used it as system status indicator. I did the same in this device support patch. D. Firmware Factory u-boot is built without 'savenv' support so it's impossible to change kernel offset. A 2MB kernel partition won't be enough in the future. OKLI loader is used here to migrate this problem: 1. add OKLI image magic support into uImage parser. 2. build an OKLI loader, compress it with lzma and add a normal uImage header. 3. flash the loader to where the original kernel supposed to be. 4. create a uImage firmware using OKLI loader. 5. flash the created firmware to where rootfs supposed to be. By doing so, u-boot will start OKLI loader, which will then load the actual kernel at 0x20000. The kernel partition is 2MB, which is too much for our loader. To save this space, "mtd-concat" is used here: 1. create a 64K (1 erase block) partition for OKLI loader and create another partition with the left space. 2. concatenate rootfs and this partition into a virtual flash. 3. use the virtual flash for firmware partition. Currently OKLI loader is flashed with factory image only. sysupgrade won't replace it. Since it only has one function and it works for several years, its unlikely to have some bugs that requires a replacement. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: mtdsplit_uimage: add support for okli imageChuanhong Guo2019-08-081-0/+58
| | | | | | | | | | This adds support for uImage used by OpenWrt kernel loader. The parser searches for uImage header at flash eraseblock boundary and it might attempt to split any firmware with loader, therefore this entry doesn't have MTD_PARSER_TYPE_FIRMWARE so that this parser is only used when explicitly defined in dts. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* gpio-button-hotplug: add volume button handlingChuanhong Guo2019-08-082-1/+3
| | | | | | This is used by PISEN WMB001N. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: add support for D-Link DIR-842 C3Perry Melange2019-08-076-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware spec of DIR-842 C3: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9888 WiFi 2.4Ghz: QCA9563 USB: circuit onboard, but components are not soldered Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
* ath79: fix vendor capitalization of TP-LinkAdrian Schmutzler2019-08-072-2/+2
| | | | | | | According to detective grep, with this patch all devices should be labelled "TP-Link" consistently. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link CPE220 v2Adrian Schmutzler2019-08-076-1/+64
| | | | | | | | | | | | | | | | | | | | | | | | | This seems to be identical to CPE210 v1 despite having removable antennas. Specifications: * SoC: Qualcomm Atheros AR9344 (560 MHz) * RAM: 64MB * Storage: 8 MB * Wireless: 2.4GHz N based built into SoC 2x2 * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link CPE510 v1Adrian Schmutzler2019-08-075-2/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with two Ethernet ports based on Atheros AR9334 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 2T2R 5 GHz - 13 dBi built-in antenna - Power, LAN0, LAN1 green LEDs - 4x green RSSI LEDs Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Based on the work of Paul Wassi <p.wassi@gmx.at> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link CPE210 v1Adrian Schmutzler2019-08-076-0/+117
| | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: Qualcomm Atheros AR9344 (560 MHz) * RAM: 64MB * Storage: 8 MB * Wireless: 2.4GHz N based built into SoC 2x2 * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: create common definition tplink-loader-okliAdrian Schmutzler2019-08-072-18/+12
| | | | | | | The loader-okli is shared by several TP-Link CPExxx devices, so give it its own definition to prevent too much code duplication. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: provide common DTSI for CPE510 v2/v3 and CPE610Adrian Schmutzler2019-08-073-194/+103
| | | | | | | This puts some common code into a new shared DTSI. Common nodes are chosen so that the new DTSI can be used for CPE210 v1, too. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tplink-safeloader: increase kernel partition for CPE/WBSx10v1Adrian Schmutzler2019-08-072-9/+9
| | | | | | | | | | | | | This is a preparation for ath79 support of the CPE210/CPE510 v1. Kernel size is chosen equal to the latest update for CPE610 v1. This also updates the partition size in ar71xx target, so code remains consistent if someone looks up the device. Since CPE210, CPE510, WBS210 and WBS510 (all v1) share the same partition layout definition, and are on deprecated target anyway, this changes them all at once. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* procd: update to latest git HEAD (FS#2425)Hans Dedecker2019-08-071-3/+3
| | | | | | 8323690 state: fix shutdown when running in a container (FS#2425) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2019-08-071-3/+3
| | | | | | 5e02f94 system-linux: fix resource leak Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* packages: apply usign padding workarounds to package indexes if neededJo-Philipp Wich2019-08-071-2/+6
| | | | | | | | | | | | | | Since usign miscalculates SHA-512 digests for input sizes of exactly 64 + N * 128 + 110 or 64 + N * 128 + 111 bytes, we need to apply some white space padding to avoid triggering the hashing edge case. While usign itself has been fixed already, there is still many firmwares in the wild which use broken usign versions to verify current package indexes so we'll need to carry this workaround in the forseeable future. Ref: https://forum.openwrt.org/t/signature-check-failed/41945 Ref: https://git.openwrt.org/5a52b379902471cef495687547c7b568142f66d2 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* config: introduce separate CONFIG_SIGNATURE_CHECK optionJo-Philipp Wich2019-08-062-2/+6
| | | | | | | | | | | | | | | | | | | Introduce a new option CONFIG_SIGNATURE_CHECK which defaults to the value of CONFIG_SIGNED_PACKAGES and thus is enabled by default. This option is needed to support building target opkg with enabled signature verification while having the signed package lists disabled. Our buildbots currently disable package signing globally in the buildroot and SDK to avoid the need to ship private signing keys to the build workers and to prevent the triggering of random key generation on the worker nodes since package signing happens off-line on the master nodes. As unintended side-effect, updated opkg packages will get built with disabled signature verification, hence the need for a new override option. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* usign: update to latest Git HEADJo-Philipp Wich2019-08-061-3/+3
| | | | | | | | | | | | | | This update fixes usign signature verification on files with certain file sizes triggering a bug in the shipped SHA-512 implementation. 5a52b37 sha512: fix bad hardcoded constant in sha512_final() 3e6648b README: replace unicode character 716c3f2 README: add reference to OpenBSD signify 86d3668 README: provide reference for ed25519 algorithm 939ec35 usign: main.c: describe necessary arguments for -G Ref: https://forum.openwrt.org/t/signature-check-failed/41945 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: drop Fon(Foxconn) parser matching for the "firmware" partitionRafał Miłecki2019-08-061-1/+0
| | | | | | | | | | | | | | | | This parser's matching function appears to be too generic as it matches e.g. Buffalo WZR-HP-G300NH. That results in incorrect parts parsing. Luckily this parser is needed by Fon FON2601 only which uses DT-based ramips target. It means we can depend on mtd subsystem matching of "fonfxc,uimage" string. That said triggering this parser based on the "firmware" (or whatever MTD_SPLIT_FIRMWARE_NAME is) partiiton name is not needed. It can be dropped which will automatically fix the Buffalo WZR-HP-G300NH case. Fixes: a1c6a316d299 ("ramips: add support for Fon FON2601") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* expat: Update to 2.2.7Daniel Engberg2019-08-061-2/+2
| | | | | | Update (lib)expat to 2.2.7 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: bump 4.19 to 4.19.64Koen Vandeputte2019-08-0620-398/+150
| | | | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch - 950-0309-usb-dwc2-Disable-all-EP-s-on-disconnect.patch - 950-0310-usb-dwc2-Fix-disable-all-EP-s-on-disconnect.patch Fixes: - CVE-2019-13648 - CVE-2019-3900 - CVE-2019-10207 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.136Koen Vandeputte2019-08-0627-173/+60
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 306-v4.16-netfilter-remove-saveroute-indirection-in-struct-nf_.patch Remove upstreamed: - 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch - 088-0002-i2c-qup-fixed-releasing-dma-without-flush-operation.patch - 500-arm64-dts-marvell-Fix-A37xx-UART0-register-size.patch Fixes: - CVE-2019-13648 - CVE-2019-10207 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.187Koen Vandeputte2019-08-0615-42/+42
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 021-bridge-multicast-to-unicast.patch Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mediatek: add new dts files for mt7622 to v4.14John Crispin2019-08-062-0/+1123
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* Revert "kernel: generic: fix fonfxc uimage parser"Rafał Miłecki2019-08-061-14/+7
| | | | | | | | | | | | | | | | | This reverts commit e92a14709d37f64dcba8c81fa51e61e5f10f439a. mtdsplit_uimage_parse_fonfxc() gets called in two situations: 1) It was /requested/ from DT using "fonfxc,uimage" compatible string 2) It was called by parsing code after finding "firmware" (MTD_SPLIT_FIRMWARE_NAME) due to the parser's type Code added in the /fix/ commit basically just disabled the second case. If that's the real goal it could be achieved by simply dropping type MTD_PARSER_TYPE_FIRMWARE. It may however require another solution as it's possible that some non-DT target actually needs fonfxc uImage parsing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: update the mt7531 switch driverJohn Crispin2019-08-061-211/+94
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* adb: fix build breakage on recent muslPetr Štetiar2019-08-061-0/+10
| | | | | | | | | | | | | | | | | | Fix build breakage as upstream has removed implicit include of sys/sysmacros.h from sys/types.h: remove implicit include of sys/sysmacros.h from sys/types.h this reverts commit f552c792c7ce5a560f214e1104d93ee5b0833967, which exposed the sysmacros.h macros (device major/minor calculations) for BSD and GNU profiles to mimic an unintentional glibc behavior some code depended on. glibc has deprecated and since removed them as the resolution to bug #19239, so it makes no sense for us to keep this behavior. affected code should all have been fixed by now, and if it's not yet fixed it needs to be for use with modern glibc anyway. Ref: https://git.musl-libc.org/cgit/musl/commit/include/sys/types.h?id=a31a30a0076c284133c0f4dfa32b8b37883ac930 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-atm: Add missing headersRosen Penev2019-08-052-1/+31
| | | | | | This fixes compilation with -Werror=implicit-function-declaration. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain: Remove powerpc64 libc restrictionRosen Penev2019-08-051-4/+2
| | | | | | | | | | Starting with version 1.1.15, musl supports powerpc64. There are no known users of powerpc64 yet. This is effectively a revert of 0de93311e1575ab6f8e9e90b5023b6fb2cedcf1f Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mvebu: remove support for deprecated DSA bindingsTomasz Maciej Nowak2019-08-051-1/+0
| | | | | | | | These legacy bindings were removed long time ago from dts, so there's no need to keep support for them. Spotted-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* toolchain: fix gcc depends on kernel headersHauke Mehrtens2019-08-051-1/+1
| | | | | | | | | | | | GCC needs the kernel headers to compile. Some GCC file includes asm/unistd.h which is provided by the kernel headers. Normally the kernel headers build is very fast and ready before the gcc uses it, but if it clones the kernel from a slow git repository it takes longer and then it could be that the gcc already wants to use the kernel headers before they are available. This patch fixes this problem by adding the missing dependency. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* mvebu: enable xHCI USB controller connected to PCIeTomasz Maciej Nowak2019-08-052-0/+2
| | | | | | | | | | This commit fixes regression on Linksys WRT1900 (Mamba) where this device doesn't have USB 3.0 controller integrated in SoC, instead it has Etron EJ168 connected to PCIe lane. Previously enabled in kernel 4.4 and 4.9, was lost in transition to 4.14. Fixes: 4ccad92 ("mvebu: Add support for kernel 4.14") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: drop mvebu support in kmod-usb3Tomasz Maciej Nowak2019-08-054-1/+3
| | | | | | | This is already enabled as kernel built-in feature in mvebu target and none other target will use it. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* build: include BUILD_VARIANT in PKG_BUILD_DIRJeffery To2019-08-0517-23/+2
| | | | | | | | | | | This changes the default PKG_BUILD_DIR to take BUILD_VARIANT into account (if set), so that packages do not need to manually override PKG_BUILD_DIR just to handle variants. This also updates most base packages with variants to use the updated default PKG_BUILD_DIR. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:13:31 +0000