aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: image: retire combined-image for Adtran/Bluesocket devicesTomasz Maciej Nowak2019-09-011-1/+1
| | | | | | | | | | | | During review it slipped by that these devices use combined-image which should never be used for newly added ones. Therefore switch to sysupgrade-tar generated images introduced in 8f6f260 ("ath79: routerstation: prepare to use sysupgrade-tar format image"). The sysupgrade accepts both images for now so no reression should occur. Cc: Brian Gonyer <bgonyer@gmail.com> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: dts: fix ja76pf2 spi frequencyTomasz Maciej Nowak2019-09-011-1/+1
| | | | | | | | | | | The frequency was filled acording the information from datasheet for particular chip (Winbond 25Q128BVFG). Unfortunately this led to coruption and introduced bad blocks on the chip. Reducing the frequency to commonly used in ath79, made the board more stable and no new bad blocks were spoted. Fixes: b3a0c97 ("ath79: add support for jjPlus JA76PF2") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: correct OCEDO Ursus phy-mode propertyDavid Bauer2019-08-311-1/+3
| | | | | | | | | This fixes the previously incorrect phy-mode for the OCEDO Ursus GMAC0. See 62abbd587dc9 ("ath79: correct various phy-mode properties") for more details. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: Replace backticks by $(...)Adrian Schmutzler2019-08-312-4/+4
| | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: WNR2200: remove redundant GPIO for WLAN LEDMichal Cieslakiewicz2019-08-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Without this patch, an extra entry appears for AR9287 GPIO that duplicates WLAN LED but in fact drives nothing: gpiochip1: GPIOs 502-511, ath9k-phy0: gpio-502 ( |netgear:blue:wlan ) out hi gpio-503 ( |netgear:amber:test ) out hi gpio-504 ( |netgear:green:power ) out lo gpio-505 ( |rfkill ) in hi gpio-507 ( |wps ) in hi gpio-508 ( |reset ) in hi gpio-510 ( |ath9k-phy0 ) out hi <===! The pin pointed above is default LED GPIO (8) for AR9287. For WNR2200 it is not connected anywhere - pin 0 drives blue WLAN LED instead - but initialization code is missing that information. This fix calls ap9x_pci_setup_wmac_led_pin() function at device setup, forcing WLAN LED pin to be 0 and removing redundant entry. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* libnfnetlink: Avoid passing both -fPIC and -fpicRosen Penev2019-08-311-3/+4
| | | | | | | | Instead, instruct the configure script to use $(FPIC) only. Mixing -fPIC and -fpic can cause issues on some platforms like PPC. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ncurses: Do not pass both -fPIC and -fpicRosen Penev2019-08-311-2/+4
| | | | | | | | | | The configure scripts matches Linux with -fPIC, which is not exactly what is desired. Since we are already passing $(FPIC), added a CONFIGURE_VAR to avoid passing -fPIC. Removed PKG_BUILD_DIR as it is already the default value. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: etactica-eg200: fix restore buttonKarl Pálsson2019-08-311-1/+1
| | | | | | | | | The button is labelled reboot/restore in documentation, and has always been used for that. Naming it WPS has always been wrong. Signed-off-by: Karl Pálsson <karlp@etactica.com> [matched author to SoB] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: add support for Netgear R6260 and R6850Christoph Krapp2019-08-318-146/+251
| | | | | | | | | | | As Netgear uses the same image for R6260, R6350 & R6850 we can merge device tree files and generate separate images for each device. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [add missing WiFi compatible string, fix network configuration] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add factory image for Netgear R6350Christoph Krapp2019-08-311-1/+6
| | | | | | | | | | | | This adds factory image generation for all three devices. These images can be flashed via WebUI for easy installation. Thanks to David Bauer for the inspiration. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [altered commit to only include the R6350] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add mt7615e support to Netgear R6350Christoph Krapp2019-08-312-1/+10
| | | | Signed-off-by: Christoph Krapp <achterin@googlemail.com>
* ramips: fix network setup for various NETGEAR boardsDavid Bauer2019-08-311-11/+6
| | | | | | | | | | | | | | | | There are currently the following issues present for the Netgear R6220, R6350 and WNDR3700 v5: - LAN and WAN MAC-addresses are inverted - WAN MAC-address is off. It are +2 compared to the LAN MAC-address (R6350 only) - Switchport order is inverted in LuCi This commit fixes both these issues by assigning correct MAC-addresses to LAN and WAN interfaces and defining the switchports with the correct labels. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: use phy trigger for various Netgear boardsDavid Bauer2019-08-313-1/+2
| | | | | | | | | This commit switches the default trigger for the WiFi LED from a netdev trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED to work, even when the wireless interface is not named "wlan0" without modifiying the LED settings. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add factory image for NETGEAR R6220David Bauer2019-08-311-1/+6
| | | | | | | | | | This adds an easy-installation factory image for the NETGEAR R6220 router. The factory image can either be flashed via the vendor Web-UI or the bootloader using nmrpflash. Tested with NETGEAR V1.1.0.86 firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: disable badblock shifting for MT7621 NANDDavid Bauer2019-08-311-1/+1
| | | | | | | | | | | | | | | | | The MediaTek MT7621 NAND driver currently intransparently shifts NAND pages when a block is marked as bad. Because of this, offsets for e.g. caldata and MAC-addresses seem to be off. This is, howeer, not a task for the mtd NAND driver, as the flash translation layer is tasked with this. This patch disables this badblock shifting. This fix was originally proposed by Jo-Philipp Wich at https://bugs.openwrt.org/index.php?do=details&task_id=1926 Fixes FS#1926 ("MTD partition offset not correctly mapped when bad eraseblocks present") Signed-off-by: David Bauer <mail@david-bauer.net>
* lua: create lua symlink for host installationDavid Bauer2019-08-311-1/+3
| | | | | | | | | Since the binaries for both lua as well as lua5.3 contain the version number, invocations of the "lua" binary are failing, as it's not created anymore for the host package. Fixes: fe59b46 ("lua: include version number in installed files") Signed-off-by: David Bauer <mail@david-bauer.net>
* build: remove harmful -nopad option from mksquashfsChristian Lamparter2019-08-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the -nopad option prevents mksquashfs from padding the image to an arbitrary 4k. It does not take into consideration that squashfs is programmed to have this 4k padding when it's being used on on a block device... which is its main "use-case". Now, after a week long discussion on the ML that included a back-and-forth between some of the possible options. But this is likely the best KISS patch to deal with the issue right away given the limited resources. From squashfs code point of view, be warned. The 4k padding is not enough when dealing with devices that have a PAGE_SIZE bigger than 4k. if it turns out to be affecting you, then please look-up either: "FS#2460 - kernel panic reading squashfs from ubi volume" bug Or the discussion on the OpenWrt-Devel ML in "amp821xx: use newly added pad-squashfs for Meraki MR24" and "Squashfs breakage lottery with UBI..." before making an educated guess. Note: This will not affect the "tiny"/small flash devices as much as it seems at first. This is because the the rootfs_data partition that follows uses jffs2. And it requires to be aligned to the flash block-size in order to work at all. So either the involved FSes will meet in the middle as before, or not at all. But in that latter case the image was already hoping for the "undefined behaviour" gamble to turn out in its favour and this is probably why this was unnoticed for so long. Fixes: FS#2460 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 4.19 to 4.19.69Koen Vandeputte2019-08-305-12/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.141Koen Vandeputte2019-08-302-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* base-files: use JSON for storing firmware validation infoRafał Miłecki2019-08-302-14/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far firmware validation result was binary limited: it was either successful or not. That meant various limitations, e.g.: 1) Lack of proper feedback on validation problems 2) No way of marking firmware as totally broken (impossible to install) This change introduces JSON for storing detailed validation info. It provides a list of performed validation tests and their results. It allows marking firmware as non-forceable (broken image that can't be even forced to install). Example: { "tests": { "fwtool_signature": true, "fwtool_device_match": true }, "valid": true, "forceable": true } Implementation is based on *internal* check_image bash script that: 1) Uses existing validation functions 2) Provides helpers for setting extra validation info This allows e.g. platform_check_image() to call notify_check_broken() when needed & prevent user from bricking a device. Right now the new JSON info is used by /sbin/sysupgrade only. It still doesn't make use of "forceable" as that is planned for later development. Further plans for this feature are: 1) Expose firmware validation using some new ubus method 2) Move validation step from /sbin/sysupgrade into "sysupgrade" ubus method so: a) It's possible to safely sysupgrade using ubus only b) /sbin/sysupgrade can be more like just a CLI Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: backport a pcie fixJohn Crispin2019-08-301-0/+534
| | | | | | PCI/e probe was failing under certain situations. Signed-off-by: John Crispin <john@phrozen.org>
* linux-firmware: add mediatek BT firmwareJohn Crispin2019-08-301-0/+9
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: rt2x00: revert commit causing regression in 5GHz bandDaniel Golle2019-08-298-14/+84
| | | | | | | | | | | | | | | | | | | From: Stanislaw Gruszka <sgruszka@redhat.com> This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: sysupgrade: fix uDPU eMMC check regressionVladimir Vid2019-08-291-23/+27
| | | | | | Add udpu_ prefix in all other function names Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* brcm2708: remove duplicated patchÁlvaro Fernández Rojas2019-08-291-10/+0
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add disable_eap_hack sysfs attributeEtienne Champetier2019-08-283-12/+165
| | | | | | | We are not sure if 640-bridge-only-accept-EAP-locally.patch is still needed as a first step, add disable_eap_hack sysfs config to allow to disable it Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* scripts/feeds: allow adding parameters to feedsJo-Philipp Wich2019-08-281-18/+30
| | | | | | | | | this allows adding "--" prefixed parameters inside feeds.conf between the target and name. The first parameter is --force which has the same effect as using -f when installing any of the packages. This allows creating feeds that will override base packages by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: fix compile issue with glibc (FS#2469)Hans Dedecker2019-08-281-3/+3
| | | | | | 0430252 sysupgrade: add missing _GNU_SOURCE define (FS#2469) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mediatek: update v4.19 switch support to latest vendor versionJohn Crispin2019-08-2818-641/+726
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath9k: backport dynack improvementsKoen Vandeputte2019-08-284-0/+300
| | | | | | | | | | | | | | | | | | | | | | | | | Close cooperation with Lorenzo Bianconi resulted in these patches which fix all remaining seen issues when using dynack. Fix link losses when: - Late Ack's are not seen or not present - switching from too low static coverage class to dynack on a live link These are fixed by setting the Ack Timeout/Slottime to the max possible value for the currently used channel width when a new station has been discovered. When traffic flows, dynack is able to adjust to optimal values within a few packets received (typically < 1 second) These changes have been thoroughly tested on ~60 offshore devices all interconnected using mesh over IBSS and dynack enabled on all. Distances between devices varied from <100m up to ~35km Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
* kernel: bump 4.19 to 4.19.68Koen Vandeputte2019-08-285-76/+13
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 950-0307-Revert-pwm-Set-class-for-exported-channels-in-sysfs.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.140Koen Vandeputte2019-08-283-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.190Koen Vandeputte2019-08-285-8/+8
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-3900 Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* fstools: update to latest Git HEADJo-Philipp Wich2019-08-282-5/+5
| | | | | | | | | 6a61b9a probe: fallback to libblkid.so.1 when libblkid.so does not exist Also remove deprecation notices from init script while we're at it. Fixes: FS#2274 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iwinfo: update to latest Git HEADJo-Philipp Wich2019-08-281-3/+3
| | | | | | | | a9f9557 nl80211: support reading hardware id from phy directly c586cd3 iwinfo: add device id for MediaTek MT7612E d4382dd iwinfo: add device id for Atheros AR9390 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm2708-gpu-fw: update to latest firmwareÁlvaro Fernández Rojas2019-08-271-12/+12
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: fix DMA leaks in bcm2835-mmcÁlvaro Fernández Rojas2019-08-272-0/+79
| | | | | | Add patches from https://github.com/raspberrypi/linux/pull/3164 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update to latest patches from RPi foundationÁlvaro Fernández Rojas2019-08-271193-59093/+64679
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx/ath79: ag71xx: dont fetch the same var againKoen Vandeputte2019-08-272-2/+2
| | | | | | | tx_size was just declared above and set to BIT(tx->order) Use the declaration instead, which could avoid a pointer deref Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: use base address value directly from the sourceKoen Vandeputte2019-08-271-2/+2
| | | | | | This brings the code more inline with the ath79 flavour Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: make use of managed dev API simplifying codeKoen Vandeputte2019-08-271-51/+34
| | | | | | | | | Backport of a4eef43a120d ("ath79: ag71xx: replace alloc_etherdev with devm_alloc_etherdev") combined with the initial changes from John Crispin. Simplifies the code a lot by using the Managed dev API. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: replace ag71xx_get_phy_if_mode_name with phy_modes()Koen Vandeputte2019-08-271-22/+1
| | | | | | Backport of f73b2d64ed56 ("ath79: ag71xx: replace ag71xx_get_phy_if_mode_name() with phy_modes()") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: pass correct device pointer to dmaKoen Vandeputte2019-08-271-7/+7
| | | | | | | | | Backport of 4eaa3626a821 ("ath79: ag71xx: pass correct device pointer to dma functions") While 4.14 does not contain the warnings, it still makes sense to use the proper pointers here. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: ag71xx: get ring_mask consistentKoen Vandeputte2019-08-272-2/+2
| | | | | | | | | All other instances of this identical declaration fetch the value directly from the ring_order. Also do it here. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: add missing register writesKoen Vandeputte2019-08-271-0/+5
| | | | | | These are added in ath79, but were not backported here Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/mtd-utils: update to 2.1.1DENG Qingfang2019-08-273-14/+16
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* mtd-utils: update to 2.1.1DENG Qingfang2019-08-272-32/+4
| | | | | | | Removed upstream patch Compile and run tested on mvebu Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: bump 4.19 to 4.19.67Koen Vandeputte2019-08-277-6/+10
| | | | | | | | | | | | Refreshed all patches. Also add a missing symbol for x86 which got used now in this bump. - ISCSI_IBFT Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.139Koen Vandeputte2019-08-276-3/+7
| | | | | | | | | | | | Refreshed all patches. Also add a missing symbol for x86 which got used now in this bump. - ISCSI_IBFT Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-08-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | This should fix a problem with 1560 MTU, 160Mhz on DFS channels, some other small issues on < 5.2 kernels, and for 5.2 driver, it pulls in some upstream stable fixes. wave-1 firmware changes since last update: * June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available. * June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle. Hoping this helps DHCP when station connects from a long distance. wave-2: * June 24, 2019 Start rate-ctrl at minimal values to help DHCP work better for far-away peers. * July 24, 2019 Fix old regression that made /a (and probably /b/g) perform poorly, at least on diet-compiled images. * Aug 8, 2019 Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic of transmitting non-block-ack frames one at a time. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-08 08:16:47 +0000