aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: fix use of local variableLeon M. George2020-06-301-1/+1
| | | | | | | | | | | mac80211_get_addr is called from mac80211_generate_mac, where the local variable initialisation id="${macidx:-0}" suggests that macidx is not always defined. Probably, idx was supposed to be used instead of $(($macidx + 1)). Fixes: 4d99db168cf7 ("mac80211: try to get interface addresses from wiphy sysfs 'addresses' if no mask is set") Signed-off-by: Leon M. George <leon@georgemail.eu> (cherry picked from commit 8f95220bcb554b1b668114e5264ebce4028c5f93)
* scripts: JSON merge don't crash if no JSON foundPaul Spooren2020-06-301-2/+0
| | | | | | | | | | | | | | | | | | | The JSON `WORK_DIR` ($(KDIR)/json_info_files) is only created if the new image generation methods from `image.mk` are used. However some targets like `armvirt` do not use it yet, so the folder is never created. The `json_overview_image_info.py` script used to raise an error if the given `WORK_DIR` isn't a folder, however it should just notify about missing JSON files. This patch removes the Python assert and exists with code 0 even if no JSON files were found, as this is not necessarily an error but simply not yet implemented. Using `glob` on an not existing `Path` results in an empty list, therefore the for loop won't run. Signed-off-by: Paul Spooren <mail@aparcar.org> CC: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 14cbd8fb2dd8c81bad06d3c3bb45213685c19c98)
* build: refactor JSON info files to `profiles.json`Paul Spooren2020-06-306-54/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON info files contain machine readable information of built profiles and resulting images. These files were added in commit 881ed09ee6e2 ("build: create JSON files containing image info"). They are useful for firmware wizards and script checking for reproducibility. Currently all JSON files are stored next to the built images, resulting in up to 168 individual files for the ath79/generic target. This patch refactors the JSON creation to store individual per image (not per profile) files in $(BUILD_DIR)/json_info_files and create an single overview file called `profiles.json` in the target directory. Storing per image files and not per profile solves the problem of parallel file writes. If a profiles sysupgrade and factory image are finished at the same time both processes would write to the same JSON file, resulting in randomly broken outputs. Some target like x86/64 do not use the image code yet, resulting in missing JSON files. If no JSON info files were created, no `profiles.json` files is created as it would be empty anyway. As before, this creation is enabled by default only if `BUILDBOT` is set. Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64. Signed-off-by: Paul Spooren <mail@aparcar.org> [json_info_files dir handling in Make, if case refactoring] Signed-off-by: Petr Štetiar <ynezz@true.cz> (backported from commit 07449f692ce4c4525e946401f4c3ed0cbbc8c4df) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: fix build breakage of some imagesPetr Štetiar2020-06-301-0/+1
| | | | | | | | | | | | | | Commit 881ed09ee6e2 ("build: create JSON files containing image info") has removed the crucial empty new line from the image copy step resulting in the following errors during make function expansion: GZ_SUFFIX := bash: GZ_SUFFIX: command not found Makefile:86: recipe for target 'openwrt-ath79-generic-tplink_archer-c7-v5-squashfs-sysupgrade.bin' failed Fixes: 881ed09ee6e2 ("build: create JSON files containing image info") Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 0fb23d67f00a18c3f9e712ca97cfc34b38071f4a)
* build: create JSON files containing image infoPaul Spooren2020-06-303-1/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The JSON info files contain details about the created firmware images per device and are stored next to the created images. The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some device/image meta data as well as a list of created firmware images. An example of openwrt-ramips-rt305x-aztech_hw550-3g.json { "id": "aztech_hw550-3g", "image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g", "images": [ { "name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin", "sha256": "db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20", "type": "sysupgrade" } ], "metadata_version": 1, "supported_devices": [ "aztech,hw550-3g", "hw550-3g" ], "target": "ramips/rt305x", "titles": [ { "model": "HW550-3G", "vendor": "Aztech" }, { "model": "ALL0239-3G", "vendor": "Allnet" } ], "version_commit": "r10920+123-0cc87b3bac", "version_number": "SNAPSHOT" } Signed-off-by: Paul Spooren <mail@aparcar.org> (backported from commit 881ed09ee6e23f6c224184bb7493253c4624fb9f) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: do not build TP-Link tiny images by defaultAdrian Schmutzler2020-06-281-0/+2
| | | | | | | | | | | | | | | For quite some time, the tiny (4M flash) TP-Link sysupgrade and factory images cannot be built anymore by the buildbots, just the initramfs-kernel.bin files are still there. Disable these images for the buildbots and don't waste build resources. Note that these devices still build fine with default settings, just not with the additional packages and config symbols for the buildbots. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: fix IPv4-only corner case and commit in 99-net-psAdrian Schmutzler2020-06-281-1/+4
| | | | | | | | | | | | | | | | | The uci config section network.globals set up in /bin/config_generate will only be created if /proc/sys/net/ipv6 exists. Correspondingly, lacking IPv6 support, the command uci set network.globals.packet_steering=1 will fail with "uci: Invalid argument" as the network.globals config has not been set up. Fix that by adding the setup there as well. While at it, limit the uci commit to the network config file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 636b62e8e232951154ac4ccd7972fda3f8de0379)
* bcm63xx: DGND3700v1: fix port orderDaniel González Cabanelas2020-06-281-4/+4
| | | | | | | | | | Fix the switch LAN labels for the DGND3700v1/DGND3800B router, the order is reversed. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> [cut out of bigger patch, adjust commit title/message accordingly] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 583b3e40254076693eb5227a9d9ae49eb2b0bcbf)
* ramips: increase SPI frequency for ELECOM WRC-GST devicesINAGAKI Hiroshi2020-06-281-1/+1
| | | | | | | | | | | | Increase the SPI frequency for ELECOM WRC-1900GST and WRC-2533GST to 40 MHz by updating the common DTSI file. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [WRC-1900GST] Acked-by: NOGUCHI Hiroshi <drvlabo@gmail.com> [split patch, adjust commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit b5ae70d0530d1a733816f921ae0fe4dd58251fbb)
* mvebu: fix default EU regdomain for Linksys WRT AC devicesJose Olivera2020-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | The mwlwifi driver sets the default country code for EU (fi- rmware region code 0x30) certified devices to FR (France), not DE (Germany). Whilst this is a trivial fix, novice users may not know how mwlwifi negatively reacts to a non-matching country code and may leave the setting alone. Especially si- nce it is under the advanced settings section in LuCI. Relevant mwlwifi driver code: https://github.com/kaloz/mwlwifi/commit/0a550312ddb5a9e00e8d602d5571598f25a78158 The mwlwifi driver readme states "Please don't change country code and let mwlwifi set it for you." However, OpenWrt's current behaviour does not adhere to this with its default, 'just flashed from factory' setting for EU devices. Signed-off-by: Jose Olivera <oliverajeo@gmail.com> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit d0e8b8310f7079ccf250f7eddbdf8b9d319c274d)
* libnetfilter-queue: fix package title and descriptionCatalin Patulea2020-06-281-3/+3
| | | | | | | | | | | The original text was copy/pasted from some other package. Adjust the package title and description to match the description on the publishers page. Signed-off-by: Catalin Patulea <catalinp@google.com> [slightly adjust content and commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 492a6594b97e765a2a93fadbe23534ae94f710fa)
* base-files: remove urandom-seed definitionSungbo Eo2020-06-281-9/+0
| | | | | | | | | urandom-seed has a separate Makefile, we can safely remove the definition here. Fixes: 27bfde9c9f78 ("base-files: move urandom seed bits into separate package") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 46a6586c83e029446ea35b02a328e5f7935d4a9f)
* ath79: drop and consolidate redundant chosen/bootargsAdrian Schmutzler2020-06-2850-190/+12
| | | | | | | | | | | | | | | | | In ath79, for several SoCs the console bootargs are defined to the very same value in every device's DTS. Consolidate these definitions in the SoC dtsi files and drop further redundant definitions elsewhere. The only device without any bootargs set has been OpenMesh OM5P-AC V2. This will now inherit the setting from qca955x.dtsi While this is a cosmetic change, backporting it to 19.07 will be a major help for anyone doing backports of device support. Without it, every backporter would have to remember to manually add the chosen node to the device's DTS. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 635f111148c3f7ccb0ecc92863a3b1a142f6ebeb)
* ath79: add support for TP-Link TL-WA801ND v3/v4Adrian Schmutzler2020-06-216-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ports support for these devices from ar71xx. Specification: - System-On-Chip: Qualcomm Atheros QCA9533 - CPU/Speed: v3: 560 MHz, v4: 650 MHz - Flash: 4096 KiB - RAM: 32 MiB - Ethernet: 1 port @ 100M - Wireless: SoC-integrated: QCA9533 2.4GHz 802.11bgn In contrast to the implementation in ar71xx (reset and WiFi button), the device actually features reset and WPS buttons. Flashing instructions: Upload the ...-factory.bin file via OEM web interface. TFTP Recovery: 1. Set PC to fixed IP address 192.168.0.66 2. Download *-factory.bin image and rename it to wa801ndv3_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. TFTP recovery has only been tested with v3, and the Wiki states that the procedure won't work for v4, which cannot be verified or falsified at the moment. Tested by Tim Ward (see forum): https://forum.openwrt.org/t/ath79-support-for-tp-link-tl-wa901nd-v3-v4-v5/61246/13 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 9a477b833ab2aea96b9eee55acb5f9e7b01b36d8)
* uclient: update to 19.07 Git HEADJo-Philipp Wich2020-06-171-3/+3
| | | | | | | | 51e16eb uclient-fetch: add option to read POST data from file 99aebe3 uclient: Add string error function Fixes: 0c910d8459 ("uclient: Update to version 2020-06-17") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "uclient: Update to version 2020-06-17"Jo-Philipp Wich2020-06-171-3/+3
| | | | | | | | | This reverts commit 0c910d845941b1df9c78a5039c1658e676c409be. We cannot use uclient Git HEAD as-is on 19.07 due to an older version of the ustream-ssl API. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uclient: Update to version 2020-06-17Daniel Golle2020-06-171-3/+3
| | | | | | | | | | | | fef6d3d uclient: Add string error function af585db uclient-fetch: support specifying advertised TLS ciphers c660986 uclient-fetch: add option to read POST data from file Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry-squashed from commits 05145ffbefc71a94c1692dfb8ac440bc67974ded 98017228ddd5ce41a63da20b78f5d2e30c87c494 dd166960f48580bf6d4a8dde071b96832bfd9e1f 8e98613f4da82628cdb490c8202b56dc989e088b)
* bcm63xx: a226m-fwb: fix linux partition offsetDaniel González Cabanelas2020-06-151-4/+4
| | | | | | | | | | | | | | | | | | | The Pirelli A226M-FWB has a wrong linux partition offset, caused by a copy-paste error. As of result of this, OpenWrt is currently broken in this unit. Fix it. While at it, also use generic node names and fix the addresses there as well. Fixes: a27d59bb4274 ("brcm63xx: switch to new partition layout specification") Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> [also fix/update node names, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit d64d5ed1425f4397d093c8777ca03f70ff1ee90c)
* ipq40xx: essedma: Disable TCP segmentation offload for IPv6Sven Eckelmann2020-06-131-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed that the the whole MAC can hang when transferring data from one ar40xx port (WAN ports) to the CPU and from the CPU back to another ar40xx port (LAN ports). The CPU was doing only NATing in that process. Usually, the problem first starts with a simple data corruption: $ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.4.0-amd64-netinst.iso -O /dev/null ... Connecting to saimei.ftp.acc.umu.se (saimei.ftp.acc.umu.se)|2001:6b0:19::138|:443... connected. ... Read error at byte 48807936/352321536 (Decryption has failed.). Retrying. But after a short while, the whole MAC will stop to react. No traffic can be transported anymore from the CPU port from/to the AR40xx PHY/switch and the MAC has to be resetted. The whole problem can be avoided by disabling IPv6 TSO for this ethernet MAC driver. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: John Crispin <john@phrozen.org> (backported from commit 678569505623e50bbbbc344c7e820fb315b79ede, with updated commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: wndr3700 series: fix wifi range & throughputChristian Lamparter2020-06-092-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ar71xx's GPIO setup for the 2.4GHz and 5GHz antennae demultiplexer: | 158 /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ | 159 ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); | 160 | 161 /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ | 162 ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); This should restore the range and throughput of the 2.4GHz radio on all the derived wndr3700 variants and versions with the AR7161 SoC. A special case is the 5GHz radio. The original wndr3700(v1) will benefit from this change. However the wndr3700v2 and later revisions were unaffected by the missing bits, as there is no demultiplexer present in the later designs. This patch uses gpio-hogs within the device-tree for all wndr3700/wndr3800/wndrmac variants. Notes: Based on the PCB pictures, the WNDR3700(v1) really had eight independent antennae. Four antennae for each radio and all of those were printed on the circut board. The WNDR3700v2 and later have just six antennae. Four of those are printed on the circuit board and serve the 2.4GHz radio. Whereas the remaining two are special 5GHz Rayspan Patch Antennae which are directly connected to the 5GHz radio. Hannu Nyman dug pretty deep and unearthed a treasure of information regarding the history of how these values came to be in the OpenWrt archives: <https://dev.archive.openwrt.org/ticket/6533.html>. Mark Mentovai came across the fixed antenna group when he was looking into the driver: fixed_antenna_group 1, (0, 1, 0, 1) fixed_antenna_group 2, (0, 1, 1, 0) fixed_antenna_group 3, (1, 0, 0, 1) fixed_antenna_group 4, (1, 0, 1, 0) Fixes: FS#3088 Reported-by: Luca Bensi Reported-by: Maciej Mazur Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Debugged-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 61307544d1f1ab81a2eb3a200164456c59308d81)
* ca-certificates: update to version 20200601Christian Lamparter2020-06-091-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the ca-certificates and ca-bundle package. This version changed the files directory again, to work/, so PKG_BUILD_DIR was brought back. A list of changes from Debian's change-log entry for 20200601 [0]: * mozilla/{certdata.txt,nssckbi.h}: Update Mozilla certificate authority bundle to version 2.40. Closes: #956411, #955038 * mozilla/blacklist.txt Add distrusted Symantec CA list to blacklist for explicit removal. Closes: #911289 Blacklist expired root certificate, "AddTrust External Root" Closes: #961907 The following certificate authorities were added (+): + "Certigna Root CA" + "emSign ECC Root CA - C3" + "emSign ECC Root CA - G3" + "emSign Root CA - C1" + "emSign Root CA - G1" + "Entrust Root Certification Authority - G4" + "GTS Root R1" + "GTS Root R2" + "GTS Root R3" + "GTS Root R4" + "Hongkong Post Root CA 3" + "UCA Extended Validation Root" + "UCA Global G2 Root" The following certificate authorities were removed (-): - "AddTrust External Root" - "Certinomis - Root CA" - "Certplus Class 2 Primary CA" - "Deutsche Telekom Root CA 2" - "GeoTrust Global CA" - "GeoTrust Primary Certification Authority" - "GeoTrust Primary Certification Authority - G2" - "GeoTrust Primary Certification Authority - G3" - "GeoTrust Universal CA" - "thawte Primary Root CA" - "thawte Primary Root CA - G2" - "thawte Primary Root CA - G3" - "VeriSign Class 3 Public Primary Certification Authority - G4" - "VeriSign Class 3 Public Primary Certification Authority - G5" - "VeriSign Universal Root Certification Authority" [0] <https://metadata.ftp-master.debian.org/changelogs//main/c/ca-certificates/ca-certificates_20200601_changelog> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit f611b014a713d82d7c7da4c171f3aa04a8984063)
* oxnas: build with 8021Q VLAN supportDaniel Golle2020-06-091-1/+0
| | | | | | | | | CONFIG_VLAN_8021Q was explicitely disabled in oxnas kernel config. Don't do that, so VLANs can be used on the target. Fixes: dcc34574ef ("oxnas: bring in new oxnas target") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit fd0cc72d9ceba6d4dc315c7f0e52d6513023f669)
* ath79: add support for TP-Link TL-WR802N V1 and V2Lech Perczak2020-06-036-2/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of Flash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to web interface: [V1] http://192.168.0.1 [V2] http://192.168.0.254 Default user is "admin" & password is "admin". On V2, there is no DHCP server running by default, so remember to set IP manually. - Go to "System Tools -> Firmware Upgrade" - Browse for firmware: [V1] "*.factory.bin" [V2] "*.factory-us.bin" or "*.factory-eu.bin" for eu model Web interface may complain if filename is too long. In such case, rename .bin to something shorter. - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Notes: When porting from ar71xx target to ath79, I found out that on V2, reset button is on GPIO12 and active low, instead of GPIO11 and active high. By cross-flashing V1 firmware to V2, I confirmed the same is true for V1. Also according to manual of V1, this one also has green LED instead of blue - both of those issues were fixed accordingly. The MAC address assignment has been checked with OEM firmware. Installation manual based on ar71xx support by Thomas Roberts Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [slightly adjust commit message, add MAC address comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 7e513136c63108bf55b38be4d2b65aa00b0d2b26)
* ath79: update WA/XC devices UBNT_VERSION to 8.5.3Roger Pueyo Centelles2020-06-031-2/+2
| | | | | | | | | | | | | | | Ubiquiti WA devices with newer hw version 2011K require UBNT_VERSION to be at least 8.5.3, otherwise the image is rejected: New ver: WA.ar934x.v8.5.0-42.OpenWrt-r10947-65030d81f3 Versions: New(525568) 8.5.0, Required(525571) 8.5.3 Invalid version 'WA.ar934x.v8.5.0-42.OpenWrt-r10947-65030d81f3' For consistency, also increase version number for XC devices. Tested-by: Pedro <pedrowrt@cas.cat> Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 95caa3436d98dac3709e550765f3f86d11a99782)
* ipq806x: EA8500 fix boot partition detectionSamantha Collard2020-06-031-2/+0
| | | | | | | | Remove extraneous code that disabled boot partition detection. Fixes: b3770eaca39f ("mtd: base-files: Unify dual-firmware devices (Linksys)") Signed-off-by: Samantha Collard <sammyrc34@gmail.com> (cherry picked from commit 0f910a8c4c03d92e399dd79dbc5d707eb03b22df)
* ath79: fix LEDs for GL.inet GL-AR150Adrian Schmutzler2020-06-032-12/+10
| | | | | | | | | | | | | | | | | | Since the wireless LED was used for boot and set up with a DT trigger, the WiFi indication hasn't worked on ath79 at all. In addition, a look into the manual revealed that the OEM configuration is as follows: LED 1 (green): power LED 2 (green): configurable LED 3 (red): wireless So, let's just keep the WiFi trigger and convert the rest to its "intended" use. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 705fe43522c756962589b360141d4c398363ce1c)
* ar71xx: fix reset key for TP-Link TL-WR802N V1/V2Lech Perczak2020-06-011-2/+2
| | | | | | | | | | | | | | | | | | | During porting support for this router to ath79 target it was discovered that GPIO mapping was incorrect (GPIO11 active high). Correct mapping for both V1 and V2 is GPIO12 active low. Default configuration from GPL source for V2 explicitly states this, and this was confirmed experimentally on ath79 by looking on /sys/kernel/debug/gpio. Correctness of this was also validated for V1 by cross-flashing vendor firmware for V1 on V2 hardware, in which reset button also worked. Fix it. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [slightly adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit f841e706403b1a111cbb6dc5930b7886307bf633)
* generic: fix flow table hw offloadJohn Crispin2020-06-011-15/+18
| | | | | | | | | Make the driver work with recent upstream changes. Fixes: FS#2632 Ref: https://github.com/openwrt/openwrt/pull/2815 Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 6786dc26a205da55ec2d9771693cdfb99e756e59)
* ar71xx: correct button type for TL-MR3020 mode sliderDavid Bauer2020-05-311-2/+2
| | | | | | | | | | | | | | | The TP-Link TL-MR3020 has a three-state mode slider which was previously integrated as a button (EV_KEY). This led to spurious activations of failsafe mode. Set the type for the button to switch (EV_SW), to avoid unintended activations of failsafe mode. Related: commit 27f3f493de06 ("gpio-button-hotplug: unify polled and interrupt code") Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit b017a016cc0cd26f84a7e6b8de3dc02dc101e888)
* ar71xx: fix splitting firmware partition for TL-WR902AC v1Adrian Schmutzler2020-05-301-0/+2
| | | | | | | | | | | | | The -O option for the tplink-v1-header was missing for the TP-Link TL-WR902AC v1, while safeloader and MTDPARTS where set up with a single firmware partition. This led to bootloops after using sysupgrade. Fixes: FS#3118 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a7b07f8ba880895f0d235a63729dd189cb2410a7)
* qos-scripts: fix interface resolvingJo-Philipp Wich2020-05-292-8/+14
| | | | | | | | | Also ensure that the error message is actually printed to stderr and that the rule generation is aborted if an interface cannot be resolved. Ref: https://github.com/openwrt/luci/issues/3975 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 559b3384666bbc6e4e9e6d86cf54bd88d30b341f)
* broadcom-wl: don't inherit lock descriptor in nas processJo-Philipp Wich2020-05-282-2/+5
| | | | | | | | | | | | Add a local hack to prevent the Broadcom WPA authenticator process from inheriting the lock descriptor 1000 used to prevent concurrent executions of the init script. Without this fix, repeated invocations of /etc/init.d/network, e.g. for obtaining the enabled state, would hang forever. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit a03d6d2fab13c478a0f6cfc3082bec141f2adcf1)
* musl: fix locking synchronization bugMatthias Schiffer2020-05-261-0/+69
| | | | | | | | | | | | | | Import proposed upstream fix [2] for the critical locking synchronization bug recently found in musl [1]. This affects all programs that are temporarily multithreaded, but then return to single-threaded operation. [1] https://www.openwall.com/lists/musl/2020/05/22/3 [2] https://www.openwall.com/lists/musl/2020/05/22/10 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 10c211031ccd4703230493025a5a3b9d6fcad2f2)
* rpcd: update to latest openwrt-19.07 Git HEADJo-Philipp Wich2020-05-261-4/+4
| | | | | | | 67c8a3f uci: reset uci_ptr flags when merging options during section add 970ce1a session: deny access if password login is disabled Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "rpcd: update to latest Git HEAD"Jo-Philipp Wich2020-05-261-4/+4
| | | | | | | | This reverts commit adf5d753eff2385063555da8bd4323e69311752a. Reverting this commit because it relies on a changed libiwinfo API. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rpcd: update to latest Git HEADJo-Philipp Wich2020-05-261-4/+4
| | | | | | | | 078bb57 uci: reset uci_ptr flags when merging options during section add 3df62bc session: deny access if password login is disabled efe51f4 iwinfo: add current hw and ht mode to info call Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* libubox: update to the latest versionFelix Fietkau2020-05-261-3/+3
| | | | | | | | | | | 86818eaa976b blob: make blob_parse_untrusted more permissive cf2e8eb485ab tests: add fuzzer seed file for crash in blob_len c2fc622b771f blobmsg: fix length in blobmsg_check_array 639c29d19717 blobmsg: simplify and fix name length checks in blobmsg_check_name 66195aee5042 blobmsg: fix missing length checks Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit b371182d2450b3c4f15cbe790351d92a2a7b5a67)
* libubox: update to the latest masterRafał Miłecki2020-05-261-3/+3
| | | | | | | | | | | 5e75160 blobmsg: fix attrs iteration in the blobmsg_check_array_len() eeddf22 tests: runqueue: try to fix race on GitLab CI 89fb613 libubox: runqueue: fix use-after-free bug 1db3e7d libubox: runqueue fix comment in header 7c4ef0d tests: list: add test case for list_empty iterator Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a765b063ee3e1dd6519f6a4a9e4d4f72214b33b8)
* ramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by defaultPetr Štetiar2020-05-261-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Looking at the current upstream driver implementation, it seems like the TX/RX flow control is enabled only if the flow control pause option is resolved from the device/link partner advertisements (or otherwise set). On the other hand, our current in-tree driver force enables TX/RX flow control by default, thus possibly leading to TX timeouts if the other end sends pause frames (which are not properly handled?): WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x1ac/0x324 NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out Disabling the flow control on PORT 5 MAC seems to fix this issues as the pause frames are then filtered out. While at it, I'm removing the if condition completely as suggested, since this code is run only on mt7621 SoC, so there is no need to check for the silicon revisions. Ref: https://lists.openwrt.org/pipermail/openwrt-devel/2017-November/009882.html Ref: https://forum.openwrt.org/t/mtk-soc-eth-watchdog-timeout-after-r11573/50000/12 Suggested-by: Felix Fietkau <nbd@nbd.name> Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit c8f8e59816eca49d776562d2d302bf990a87faf0)
* hostapd: backport wolfssl bignum fixesDaniel Golle2020-05-254-1/+107
| | | | | | | | | crypto_bignum_rand() use needless time-consuming filtering which resulted in SAE no longer connecting within time limits. Import fixes from hostap upstream to fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 631c437a91c20df678b25dcc34fe23636116a35a)
* ucert: update to latest git HEADMatthias Schiffer2020-05-241-3/+3
| | | | | | | | | | | | | | | | | | | | 00b921d80ac0 Do not print line number in debug messages 96c42c5ed320 Fix length checks in cert_load() fe06b4b836b3 usign-exec: improve usign -F output handling 19f9e1917e1b usign-exec: return code fixes 077feb5b5824 usign-exec: close writing end of pipe early in parent process 7ec4bb764e1e usign-exec: remove redundant return statements 5a738e549d31 usign-exec: change usign_f_* fingerprint argument to char[17] 112488bbbccc usign-exec: do not close stdin and stderr before exec 38dcb1a6f121 usign-exec: fix exec error handling a9be4fb17df2 usign-exec: simplify usign execv calls 854d93e2326a Introduce read_file() helper, improve error reporting afc86f352bf7 Fix return code of write_file() fdff10852326 stdout/stderr improvements dddb2aa8124d ci: fix unit test failures by enabling full ucert build 5f206bcfe5c2 ci: enable unit testing Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* brcm47xx: disable Netgear WNR2000 v2 by defaultJo-Philipp Wich2020-05-241-0/+1
| | | | | | | | | | Disable the Netgear WNR2000 v2 image by default as the device has insufficient flash space for release build images. Ref: https://forum.openwrt.org/t/devices-too-big-to-save-overlay/18161/72 Signed-off-by: Jo-Philipp Wich <jo@mein.io> [drop change on netgear-wnr3500l-v1-na] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* squashfs: Fix compile with GCC 10Hauke Mehrtens2020-05-241-0/+25
| | | | | | | | | | Fixes the following build error with GCC 10: /usr/bin/ld: read_fs.o:(.bss+0x0): multiple definition of `swap'; mksquashfs.o:(.bss+0x1b2a88): first defined here And a compile warning. Fixes: FS#3104, FS#3119 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1bbc1aa884902fd05cc579b53d68b2ba0b18683f)
* usign: update to latest git HEADMatthias Schiffer2020-05-231-3/+3
| | | | | | | f1f65026a941 Always pad fingerprints to 16 characters Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit e35e40ad824eab9d51cdd690fb747e576e01412f)
* usign: update to latest Git HEADHauke Mehrtens2020-05-231-3/+3
| | | | | | | f34a383 main: fix some resource leaks Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 81e93fff7d867851f2fedd966a931336d4092686)
* ath79: add support for TP-Link TL-WA901ND v4 and v5Adrian Schmutzler2020-05-208-69/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ports support for the TL-WA901ND v4 and v5 from ar71xx to ath79. They are similar to the TP9343-based TL-WR940N v3/v4 and TL-WR941ND v6. Specifications: SoC: TP9343 Flash/RAM: 4/32 MiB CPU: 750 MHz WiFi: 2.4 GHz b/g/n Ethernet: 1 port (100M) Flashing instructions: Upload the factory image via the vendor firmware upgrade option. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to * (see below) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. * The image name for TFTP recovery is wa901ndv4_tp_recovery.bin for both variants. In ar71xx, a MAC address with offset 1 was used for ethernet port. That's probably wrong, but this commit sticks to it until we know the correct value. Like in ar71xx, this builds the default factory.bin with EU country code. Thanks to Leonardo Weiss for testing on the v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (backported from commit 4a61a88f9006f70444e00699f76551c75f73c14e)
* ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1Adrian Schmutzler2020-05-208-1/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the various clones of the TL-WA830RE recently supported in fb99ac6807f2 ("ath79: add support for TP-Link TL-WA830RE v1"): - tplink,tl-wa701nd-v1 - tplink,tl-wa730re-v1 - tplink,tl-wa801nd-v1 - tplink,tl-wa830re-v1 (already supported) - tplink,tl-wa901nd-v1 Since these devices are 100%-clones in ar71xx, this patch adds all of them without run-testing (as this has been done for TL-WA830RE v1). Specifications: - SOC: Atheros AR7240 - CPU: 400MHz - Flash: 4 MiB (Spansion S25FL032P) - RAM: 32 MiB (Zentel A3S56D40FTP-G5) - WLAN: Atheros AR9280 bgn 2x2 - Ethernet: 1 port (100M) Flash instructions: - install from u-boot with tftp (requires serial access) > setenv ipaddr a.b.c.d > setenv serverip e.f.g.h > tftpboot 0x80000000 \ openwrt-ath79-tiny-tplink_tl-waxxxxx-v1-squashfs-factory.bin > erase 0x9f020000 +0x3c0000 > cp.b 0x80000000 0x9f020000 0x3c0000 > bootm 0x9f020000 - flash factory image from OEM WebUI - sysupgrade from ar71xx image Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (backported from commit 2f1cc5c3d5e35d6aa76e794e3d5b4f5856cd38bc)
* ath79: add support for TP-Link TL-WR940N v6Adrian Schmutzler2020-05-204-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TL-WR940N v6 is similar to v3/v4, it just has different LEDs and MAC address assignment. Specification: - 750 MHz CPU - 32 MB of RAM - 4 MB of FLASH - 2.4 GHz WiFi - 4x 10/100 Mbps Ethernet The use of LEDs is based on ar71xx, so blue LED is used for WAN and orange LED for diag (boot/failsafe/etc.). Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr940nv6_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Thanks to Manuel Kock for reviewing and testing this patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Manuel Kock <github.web@manu.li> (backported from commit fbd00bb8d406a0ace7ea9c49a79cbad2418689a5)
* ath79: add support for TP-Link TL-WA830RE v1Christian Buschau2020-05-206-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ports support for the TL-WA830RE v1 range extender from ar71xx to ath79. Specifications: - SOC: Atheros AR7240 - CPU: 400MHz - Flash: 4 MiB (Spansion S25FL032P) - RAM: 32 MiB (Zentel A3S56D40FTP-G5) - WLAN: Atheros AR9280 bgn 2x2 - Ethernet: 1 port (100M) Flash instructions: - install from u-boot with tftp (requires serial access) > setenv ipaddr a.b.c.d > setenv serverip e.f.g.h > tftpboot 0x80000000 \ openwrt-ath79-tiny-tplink_tl-wa830re-v1-squashfs-factory.bin > erase 0x9f020000 +0x3c0000 > cp.b 0x80000000 0x9f020000 0x3c0000 > bootm 0x9f020000 - flash factory image from OEM WebUI - sysupgrade from ar71xx image The device seems to be a clone of the following devices not yet added to ath79: - tl-wa701nd-v1 - tl-wa730re-v1 - tl-wa801nd-v1 - tl-wa901nd-v1 Signed-off-by: Christian Buschau <christian.buschau@mailbox.org> [make use of ar7240_tplink.dtsi, add note about clones] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit fb99ac6807f29eb5fe50271eff711e7415038731)
* ath79: reorganize DTSI for ar7240 TP-Link devicesAdrian Schmutzler2020-05-208-46/+57
| | | | | | | | | | | | | | | | | The current set of TP-Link devices with ar7240 SoC all share the same DTSI file. As the latter is very similar to the definition required for the to-be-supported TP-Link TL-WA devices with ar7240, this patch splits the definitions into a shared part for all TP-Link devices (ar7240_tplink.dtsi) and a file containing the specific setup for the present TL-WR devices (ar7240_tplink_tl-wr.dtsi), equivalent to the former ar7240_tplink_tl-wr74xn-v1.dtsi. While at it, remove unused firmware partition label and rename pinmux_switch_led_pins. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 273e00c4a506c076dddfc51c3c00d4523496f5f4)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 03:14:25 +0000