aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ath79: remove wmac mtd-mac-address for UniFi AC familyRoger Pueyo Centelles2019-11-031-1/+1
| | | | | | | | | | | | | | | | The MAC address for the wmac 2.4 GHz radio of the Ubiquiti UniFi AC family of devices is actually embedded in the mtd-cal-data, so there is no need for mtd-mac-address (which was incorrectly forcing wmac to have the same MAC as eth0). This makes it coherent with the stock firmware and the ar71xx target: · XX:XX:XX:X0:XX:XX eth0 · XX:XX:XX:X1:XX:XX ath0/wlan1 (2.4 GHz) · XX:XX:XX:X2:XX:XX ath1/wlan0 (5 GHz) Checked on a UniFi AC Mesh, a UniFi AC LR and a UniFi Lite. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ath79: use nand_do_upgrade by default for nand subtargetAdrian Schmutzler2019-11-031-5/+3
| | | | | | | | On nand subtarget, the default upgrade mechanism should be nand_do_upgrade. This patch changes platform_do_upgrade() accordingly. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: split base-files into subtargetsAdrian Schmutzler2019-11-0327-1266/+1902
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space. In certain cases, keeping files in parent (=target) base-files was more convenient, and thus no splitting was performed for those. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (mt7621) 60958 B split (mt7620) 46358 B (- 14.3 kiB) split (mt7621) 48759 B (- 11.9 kiB) split (mt76x8) 44948 B (- 15.6 kiB) split (rt288x) 43508 B (- 17.0 kiB) split (rt305x) 45616 B (- 15.0 kiB) split (rt3883) 44176 B (- 16.4 kiB) Run-tested on: GL.iNet GL-MT300N-V2 (mt76x8) D-Link DWR-116 (mt7620) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add newline for ASUS RT-ACx5P DTSesAdrian Schmutzler2019-11-032-2/+2
| | | | | | Those files are missing the newline at the end. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rules.mk: remove "$(STAGING_DIR)/include"Sebastian Kemper2019-11-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "$(STAGING_DIR)/include" was carried over from buildroot-ng to OpenWrt in commit 60c1f0f64d23003a19a07d6b9638542130f6641d. buildroot has dropped this directory a long time ago. In OpenWrt the directory is still created by the PrepareStaging macro and is part of the default TARGET_CPPFLAGS. But nothing at all installs headers into this directory, nor should anything be installed under this path. Removing this directory from TARGET_CPPFLAGS will cut down the log noise a bit. Not only will CPPFLAGS be shorter, there will be less warnings set off by "-Wmissing-include-dirs" (or even failures when paired with "-Werror"). After all the directory does not even _exist_ in the SDKs, which are used on the build bots when building packages (see [1] and [2]). make[8]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-aarch64_generic_musl/libmbim-1.20.0/src/common' CC libmbim_common_la-mbim-common.lo cc1: error: /builder/shared-workdir/build/sdk/staging_dir/target-aarch64_generic_musl/include: No such file or directory [-Werror=missing-include-dirs] cc1: all warnings being treated as errors [1] https://github.com/openwrt/packages/issues/10377 [2] https://github.com/openwrt/packages/pull/10378 Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Acked-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Rosen Penev <rosenp@gmail.com>
* ath79: remove further redundant mtd-mac-address for wmacAdrian Schmutzler2019-11-024-4/+0
| | | | | | | | | | | | | | | For several devices, wmac MAC address is set from art 0x1002 explicitly by using mtd-mac-address although mtd-cal-data is pulled from art 0x1000. With the MAC address in 0x1002, the driver should automatically use it when reading caldata from 0x1000. Thus, remove the redundant mtd-mac-address for those devices. This patch addresses the cases where the calibration data partition is not labelled art, having been overlooked in the first patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: convert IMAGE_SIZE/KERNEL_SIZE/BLOCKSIZE to kiBAdrian Schmutzler2019-11-021-5/+5
| | | | | | | | | | | | | | This cosmetical patch converts IMAGE_SIZE, KERNEL_SIZE and BLOCKSIZE definitions to kilobytes, as this is consistent and easier to read/type. An exception was made for asus_rt-ac58u, where the IMAGE_SIZE of 20439364 cannot be divided by 1024 (and also does not seem to match anything in DTS). Build-tested for all devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix several issues for ZyXEL NBG6716Adrian Schmutzler2019-11-023-23/+23
| | | | | | | | | | | | | This fixes several issues introduced with ZyXEL NBG6716 support: - Inhomogeneous indent - Wrong ath10k MAC patching function - Wrong brackets for pad-to in nand.mk - Add missing DEVICE_MODEL - Remove k2t.sh include (copy/paste leftover) Fixes: 99835e09992b ("ath79: add support for ZyXEL NBG6716") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Netgear WNDR4300Michal Cieslakiewicz2019-11-022-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNDR4300. Router was previously supported by ar71xx target only. Note: device requires 'ar934x-nand' driver in kernel. Specification ============= * Description: Netgear WNDR4300 * Loader: U-boot * SOC: Atheros AR9344 (560 MHz) * RAM: 128 MiB * Flash: 128 MiB (NAND) - U-boot binary: 256 KiB - U-boot environment: 256 KiB - ART: 256 KiB - POT: 512 KiB - Language: 2 MiB - Config: 512 KiB - Traffic Meter: 3 MiB - Firmware: 25 MiB - ART Backup: 256 KiB - Reserved: 96 MiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (amber/green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 2.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Note about partitioning: firmware partition offset (0x6c0000) is hardcoded into vendor's u-boot, so this partition cannot be moved and resized to include Netgear-specific flash areas (pot, language, config, traffic_meter) not used by OpenWrt. Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* hostapd: add IEEE 802.11k supportKyle Copperfield2019-11-021-0/+13
| | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Enables radio resource management to be reported by hostapd to clients. Ref: https://github.com/lede-project/source/pull/1430 Co-developed-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* ath79: add support for Netgear WNDR4300Michal Cieslakiewicz2019-11-027-0/+352
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNDR4300. Router was previously supported by ar71xx target only. Note: device requires 'ar934x-nand' driver in kernel. Specification ============= * Description: Netgear WNDR4300 * Loader: U-boot * SOC: Atheros AR9344 (560 MHz) * RAM: 128 MiB * Flash: 128 MiB (NAND) - U-boot binary: 256 KiB - U-boot environment: 256 KiB - ART: 256 KiB - POT: 512 KiB - Language: 2 MiB - Config: 512 KiB - Traffic Meter: 3 MiB - Firmware: 25 MiB - ART Backup: 256 KiB - Reserved: 96 MiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (amber/green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 2.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Note about partitioning: firmware partition offset (0x6c0000) is hardcoded into vendor's u-boot, so this partition cannot be moved and resized to include Netgear-specific flash areas (pot, language, config, traffic_meter) not used by OpenWrt. Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ipq40xx: ipq4019: Add new device Compex WPJ419Daniel Danzberger2019-11-026-1/+396
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device contains 2 flash devices. One NOR (32M) and one NAND (128M). U-boot and caldata are on the NOR, the firmware on the NAND. SoC: IPQ4019 CPU: 4x 710MHz ARMv7 RAM: 256MB FLASH: NOR:32MB NAND:128MB ETH: 2x GMAC Gigabit POE: 802.3 af/at POE, IEEE802.3af/IEEE802.3at(48-56V) WIFI: 1x 2.4Ghz Atheros qca4019 2x2 MU-MIMO 1x 5.0Ghz Atheros qca4019 2x2 MU-MIMO USB: 1x 3.0 PCI: 1x Mini PCIe SIM: 1x Slot SD: 1x MicroSD slot BTN: Reset LED: - Power - Ethernet UART: 1x Serial Port 4 Pin Connector (UART) 1x Serial Port 6 Pin Connector (High Speed UART) POWER: 12V 2A Installation ------------ Initial flashing can only be done via u-boot using the following commands: tftpboot openwrt-ipq40xx-generic-compex_wpj419-squashfs-nand-factory.ubi nand erase.chip; nand write ${fileaddr} 0x0 ${filesize} res Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* libnl: update to 3.5.0DENG Qingfang2019-11-013-211/+4
| | | | | | Update libnl to 3.5.0 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* uboot-mvebu: add support for Macronix mx25u12835f flashVladimir Vid2019-11-011-0/+10
| | | | | | Some of A3700 boards use mx25u12835f, specifically uDPU and ESPRESSObin v7. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* ustream-ssl: Update to latest git HEADHauke Mehrtens2019-11-011-5/+5
| | | | | | | | | | 465f8dc wolfssl: adjust to new API in v4.2.0 3b06c65 Update example certificate & key, fix typo 1c38fd8 wolfssl: enable CN validation 33308ee ustream-io-cyassl.c: fix client-mode connections 79d91aa Remove CyaSSL, WolfSSL < 3.10.4 support Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: Allow PKG_ASLR_PIE for DSL and voice driversHauke Mehrtens2019-11-017-8/+0
| | | | | | | | | | | When ASLR_PIE was activated globally these drivers failed to build because the user space LDFLAGS leaked into the kernel build process. This was fixed in upstream Linux kernel commit ce99d0bf312d ("kbuild: clear LDFLAGS in the top Makefile") which went into Linux 4.17. The lantiq target is now on Linux 4.19 only and these exceptions are not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Netgear WNR2200Michal Cieslakiewicz2019-11-018-0/+331
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNR2200. Router was previously supported by ar71xx target only (8 MiB variant). Netgear WNR2200 has two flash versions - 8MiB sold in EU, US etc. and 16 MiB for Russia and China markets. Apart from flash size both variants share the same hardware specification. Specification ============= * Description: Netgear WNR2200 * Loader: U-boot * SOC: Atheros AR7241 (360 MHz) * RAM: 64 MiB * Flash: 8 MiB or 16 MiB (SPI NOR) - U-boot binary: 256 KiB - U-boot environment: 64 KiB - Firmware: 7808 KiB or 16000 KiB - ART: 64 KiB * Ethernet: 4 x 10/100 LAN + 1 x 10/100 WAN * Wireless: 2.4 GHz b/g/n (Atheros AR9287) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN (blue) - 4 x LAN (amber/green) - WPS (green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 1.5A * MAC addresses: LAN on case label, WAN +1, WLAN +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_generic=y CONFIG_TARGET_ath79_generic_DEVICE_netgear_wnr2200-8m=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y CONFIG_KERNEL_DEBUG_INFO=y CONFIG_KERNEL_DEBUG_KERNEL=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* rpcd: update to latest Git HEADJo-Philipp Wich2019-11-011-3/+3
| | | | | | | | | | | | | | | d442d62 plugin: fix double free in finish callback ee26d83 main: exec_self: make clang analyzer happy 90e40bd file: exec: properly free memory on error 9ecfada uci: free configs list memory on return 32fba36 exec: always call finish_cb to allow plugin to free up memory ca3e2d5 plugin: do not free method name separately 02c6e1d exec: properly free memory on rpc_exec() error cc50263 plugin: exec: properly free memory on parse error bd0ed25 uci: reset uci_ptr flags when merging set operations 37aa919 plugin: fix leaking invoked method name for exec plugins Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dropbear: rebuild libs on config changeYousong Zhou2019-11-011-0/+4
| | | | | | | | | Required as dependency on dropbear config headers is not tracked in dropbear build system Fixes FS#2275 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: bump 4.19 to 4.19.81Koen Vandeputte2019-10-313-13/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.151Koen Vandeputte2019-10-314-22/+22
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.198Koen Vandeputte2019-10-311-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: mark kmod-usb-serial-wwan as hiddenYousong Zhou2019-10-301-2/+2
| | | | | | | | | The kconfig symbol is an invisible one since its introduction. It is not supposed to be enabled on its own. Resolves FS#1821 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: bump 4.19 to 4.19.80Koen Vandeputte2019-10-309-26/+13
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.150Koen Vandeputte2019-10-303-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.197Koen Vandeputte2019-10-301-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* base-files: hotplug-call: exit success when dir is absentYousong Zhou2019-10-292-3/+3
| | | | | | | | | "block mount" invokes "hotplug-call mount". It emits the following error when mount is not present hotplug-call call failed Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: fix swconfig compilation with kernels 5.2+Rafał Miłecki2019-10-281-0/+23
| | | | | | | This is related to the upstream kernel change 3b0f31f2b8c9 ("genetlink: make policy common to family"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netfilter: fix NAT packaging with kernels 5.2+Rafał Miłecki2019-10-281-1/+2
| | | | | | | It's related to the upstream kernel commit adf82accc5f5 ("netfilter: x_tables: merge ip and ipv6 masquerade modules"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: fix incorrect identation in qca9557.dtsiDavid Bauer2019-10-271-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: move base-files for ZyXEL NBG6716Adrian Schmutzler2019-10-278-20/+53
| | | | | | | | | | | | | | Due to rebase of the base-files split patch after adding support for the ZyXEL NBG6716, its base-files were added to the generic subtarget, although the device belongs to the nand subtarget. This moves the definitions to their proper locations. Fixes: 0130022baec0 ("ath79: split base-files into subtargets") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [improve commit message, rebase] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for Aerohive HiveAP 121David Bauer2019-10-275-2/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Aerohive HiveAP-121. It was previously already supported in the ar71xx subtarget. The following is copied from the commit which added ar71xx support: Specification: - SoC: Atheros AR9344-BC2A at 560MHz - WiFi 1: 2.4GHz Atheros AR9340? - SoC - WiFi 2: 5.0GHz Atheros AR9382-AL1A - Memory: 128MB from 2x Nanya NT5TU32M16DG-AC - SPI: 1MB Macronix MX25L8006E - NAND: 128MB Hynix H27U1G8F2BTR-BC - Ethernet: Atheros AR8035-A - USB: 1x 2.0 - TPM: Atmel SC3204 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, download and flash LEDE factory image over tftp: dhcp; setenv serverip tftp-server-ip; tftpboot 0x81000000 lede-ar71xx-nand-hiveap-121-squashfs-factory.bin; nand erase 0x800000 0x800000; nand write 0x81000000 0x800000 0x800000; reset; Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: enable PCI for whole targetDavid Bauer2019-10-274-18/+18
| | | | | | | | | | This commit adds PCI support for the whole ath79 target. Previously, this was only done in the generic and tiny subtargets. With the introduction of the HiveAP-121, PCI will be a requirement for all subtargets, thus moving PCI support to the target configuration. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: remove redundant mtd-mac-address for wmacAdrian Schmutzler2019-10-279-9/+0
| | | | | | | | | | | | | | For several devices, wmac MAC address is set from art 0x1002 explicitly by using mtd-mac-address although mtd-cal-data is pulled from art 0x1000. With the MAC address in 0x1002, the driver should automatically use it when reading caldata from 0x1000. Thus, remove the redundant mtd-mac-address for those devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Jeff Kletsky <git-commits@allycomm.com> Tested-by: Karl Palsson <karlp@etactica.com>
* ath79: disable delays on AT803X config initDavid Bauer2019-10-272-0/+54
| | | | | | | | | | | | | | Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay only for RGMII mode"), delays were not disabled on driver probe for the Atheros AR803x PHYs, although the RX delay is enabled on soft and hard reset. In addition, the TX delay setting is retained on soft-reset. This patch disables both delays on config init to align the behavior with kernel 5.1 and higher. It can be safely dropped with kernel 5.1. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047David Bauer2019-10-271-5/+5
| | | | | | | This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt master and 19.07. 18.06 seems not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: retrieve wave 1 firmware from kvaloDavid Bauer2019-10-272-4/+4
| | | | | | | | | | | | | This commit changes the source of the Wave 1 ath10k-firmware from linux-firmware to Kall Valos ath10k-firmware repository. This is necessary as the firmware selected in linux-firmware produces frequent crashes in some circumstances. This patch can be removed as soon as linux-firmware carries 10.2.4-1.0-00047 firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* build: have scripts/feeds honor all toplevel .mk-files of a feedSven Roederer2019-10-271-4/+7
| | | | | | | | | | The luci and freifunk feed having a common Makefile included by the individual packages. Currently a change to this file will be ignored when running "scripts/feeds update". When we are updating for a feed, add a dependency for all .mk files in the root of it. Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
* util-linux: Disable utils requiring libpamRosen Penev2019-10-271-1/+7
| | | | | | | When the build system finds libpam, it enables building of these tools, causing linker failures. Explicitly disable them as they are unused. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: split base-files into subtargetsAdrian Schmutzler2019-10-2718-126/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space (especially helpful for the tiny devices). The only script remaining in parent base-files is /etc/hotplug.d/ieee80211/00-wifi-migration, everything else is moved/split. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (generic) 49135 B split (generic) 48533 B (- 0.6 kiB) split (tiny) 43337 B (- 5.7 kiB) split (nand) 44423 B (- 4.6 kiB) Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: ethernet: Replace random_ether_addr with eth_hw_addr_randomRosen Penev2019-10-271-1/+1
| | | | | | eth_hw_addr_random additionally sets addr_assign_type to NET_ADDR_RANDOM. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq40xx: add label MAC address for Netgear EX6100v2/EX6150v2Adrian Schmutzler2019-10-271-0/+1
| | | | | | | | | | | | | | | | | | This is based on the EX6150v2, which should be identical to the EX6100v2: The device bears two MAC addresses ("MAC 1" and "MAC 2") that correspond to phy0 and phy1. The ethernet MAC address (gmac0) is the same as phy0. As this one is accessible via local-mac-address in gmac0, the latter is used for label-mac-device. (Although this is a one-port, gmac1 also has a local-mac-address assigned. This has the same vendor part as the other addresses, but completely different data for the device part.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: use DEVICE_VARIANT for Unielec U4019 flash sizeAdrian Schmutzler2019-10-271-1/+2
| | | | | | | If flash size is used as part of a device's title, it should be specified as DEVICE_VARIANT like for the other devices so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix remaining IMAGE_SIZE issuesAdrian Schmutzler2019-10-272-1/+2
| | | | | | | | This fixes the remaining IMAGE_SIZE issues in ath79 target. All devices in target have been checked, so together with previous patches this target should be "clean" afterwards. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix IMAGE_SIZE for common TP-Link definitionsAdrian Schmutzler2019-10-271-3/+3
| | | | | | | | | | | | | | | | | | | So far, IMAGE_SIZE is set as follows: tplink-4m* 3904k 0x3d0000 tplink-8m* 7936k 0x7c0000 tplink-16m* 15872k 0xf80000 However, based on the size of firmware partitions in DTS it should be: tplink-4m* 3904k 0x3d0000 tplink-8m* 8000k 0x7d0000 tplink-16m* 16192k 0xfd0000 All (!) 8m*/16m* devices actually follow the latter scheme, which is also consistent in terms of left free space for other partitions. Thus, fix it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: tidy up and fix IMAGE_SIZE for Ubiquiti devicesAdrian Schmutzler2019-10-271-5/+4
| | | | | | | | | | | | This addresses IMAGE_SIZE inconsistencies in generic_ubnt.mk by: 1. (cosmetical) Move IMAGE_SIZE out of top definition ("ubnt"), since despite two all subdefinition have different values. 2. (change) Fix IMAGE_SIZE for ubnt-xm and ubnt-bz (7552k->7488k). 3. (cosmetical) Move IMAGE_SIZE of ubnt-wa devices to parent node since all have same size (it is defined in parent DTSI ...). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: wnr1000v2: fix image header informationMichal Cieslakiewicz2019-10-271-0/+2
| | | | | | | | Factory image generated for Netgear WNR1000 v2 has incorrect device and hardware ID information in header due to missing makefile variables. This fix adds them to device section. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: add support for ZyXEL NBG6716André Valentin2019-10-278-1/+387
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attention: Kernel partition size has been enlarged to 4MB. To switch, you must update to latest ar71xx-nand snapshort and flash the sysupgrade-4M-Kernel.bin: zcat openwrt-ath79-nand-zyxel_nbg6716-squashfs-sysupgrade-4M-Kernel.bin | mtd -r -e ubi write - firmware; reboot -f You will end up with a fresh config if you do not inject config into the image. The NBG6716 may come with 128MB or 256MB NAND. ar71xx was able to use all, but ath79 can only use the first 128MB. Therefore the complete NAND needs to be overwritten. If not, the old UBI may make problems and lead to reboot loop. Access the real u-boot shell: ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02" When the device is starting up, the user can enter the the loader shell by simply pressing a key within the 3 seconds once the following string appears on the serial console: | Hit any key to stop autoboot: 3 The user is then dropped to a locked shell. |NBG6716> HELP |ATEN x[,y] set BootExtension Debug Flag (y=password) |ATSE x show the seed of password generator |ATSH dump manufacturer related data in ROM |ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) |ATGO boot up whole system |ATUR x upgrade RAS image (filename) |NBG6716> In order to escape/unlock a password challenge has to be passed. Note: the value is dynamic! you have to calculate your own! First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env) to get the challange value/seed. |NBG6716> ATSE NBG6716 |012345678901 This seed/value can be converted to the password with the help of this bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors): - tool.sh - ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( $a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ $a )) printf "ATEN 1,%X\n" $p - end of tool.sh - |# bash ./tool.sh 012345678901 | |ATEN 1,879C711 copy and paste the result into the shell to unlock zloader. |NBG6716> ATEN 1,0046B0017430 If the entered code was correct the shell will change to use the ATGU command to enter the real u-boot shell. |NBG6716> ATGU |NBG6716# Signed-off-by: André Valentin <avalentin@marcant.net>
* ar71xx: fix bug in NBG6716 kernelpacking, add firmware partitionAndré Valentin2019-10-271-2/+3
| | | | | | | -Fix the kernel image generation (more robust) -Add a firmware partition table allowing easy upgrade to ath79 Signed-off-by: André Valentin <avalentin@marcant.net>
* tools/mkrasimage: Add support for 128k header sizeAndré Valentin2019-10-271-3/+8
| | | | | | 128k header size support is needed for ZyXEL NBG6716. Signed-off-by: André Valentin <avalentin@marcant.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 12:02:17 +0000