aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: add ipq4019 fritz4040 supportChristian Lamparter2017-03-227-4/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for AVM FRITZ!Box 4040. hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB Nanya NT5CC128M16IP FLASH: 32 MiB MXIC MX25L25635FMI ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) 1 x 2.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: one WLAN and one WPS button LEDS: Power, WAN/Internet, WIFI, INFO (red and amber) and LAN. Serial: WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The Serial setting is 115200-8-N-1. The SoC's serial port is right next to the MXIC FLASH chip. The board has a unpopulated 1x4 0.1" header for it. Use a multimeter to figure out the pinout! This board currently needs an additional u-boot image in order to boot properly. Booting with EVA isn't possible ATM. Install Procedure: 0. It's highly recommended to connect to the serial port. The serial settings are listed above. 1. install a u-boot image for AVM Fritz!Box 4040 (see <https://github.com/chunkeey/FritzBox-4040-UBOOT/releases> and <https://github.com/chunkeey/FritzBox-4040-UBOOT/blob/master/upload-to-f4040.sh>) 2. upload the initramfs.itb image via tftp (u-boot listens to 192.168.1.1 - use binary transfer mode!) 3. connect to the FB4040 and use sysupgrade sysupgrade.bin to install the image. Works: - Switch and Ethernet (99%) - Buttons (WLAN, WPS) - FLASH (1 x 32MiB NOR Chip) - WLAN2G and WLAN5G - CPUFREQ scaling - PRNG - serial - Crypto Accelerator - sysupgrade (Read the flash instructions to avoid bricking) - full LEDE Install (Read the flash instructions to avoid bricking) - LEDs (Power, WAN, Info (red and amber), LAN) The LEDs are connected to the QCA8075 LED ports. The AR40xx driver contains a gpio-controller to handle these special "GPIOs". - USB Both 3.0 and 2.0 ports - many packages from other ARMv7 boards (This does include the RaspberryPi Model 2!) - ... Not planned: - WAN<->LAN short-cut - Qualcomm Secure Execution Environment - ... Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add ipq4019 supportChristian Lamparter2017-03-2229-327/+21249
| | | | | Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John Crispin <john@phrozen.org>
* uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040Felix Fietkau2017-03-224-0/+401
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: nand: make it possible to configure kernel and ubi partitionChristian Lamparter2017-03-221-2/+2
| | | | | | | | | | With this patch, the nand.sh script no longer overwrites CI_KERNELPART and CI_UBIPART if they have been set before. This allows platforms specify alternative values for these variables. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: enable ath10k AHB support for QCA4019Christian Lamparter2017-03-224-51/+50
| | | | | | | | | | | | | | | | This patch enables the ATH10K_AHB support for the QCA4019 devices on the AHB bus. This patch also removes 936-ath10k_skip_otp_check.patch because it breaks the AHB device identification. "Patch is wrong. I find it frustrating OpenWRT/LEDE doesn't try to work with upstream on ixing these things right." [1] <https://www.mail-archive.com/ath10k@lists.infradead.org/msg05896.html> It also limits ath10k memory hunger (This is a problem with 128MiB RAM) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: firmware package for QCA4019 devicesChristian Lamparter2017-03-221-0/+18
| | | | | | | This patch adds a new firmware package to ath10k-firmware called ath10k-firmware-qca4019. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: bump to latest versionChristian Lamparter2017-03-221-3/+3
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* include: add KERNEL_LOAD_ADDR to TARGET_VARSJohn Crispin2017-03-221-1/+1
| | | | | | This will allow us to override the variable from within a Device template. Signed-off-by: John Crispin <john@phrozen.org>
* openvpn: add extra respawn parametersMartin Schiller2017-03-221-0/+3
| | | | | | | | | | | | | | | This change protects the openvpn instances to be marked as "in a crash loop" and thereby the connection retries will run infinitely. When the remote site of an openvpn connection goes down for some time (network failure etc.) the openvpn instance in an openwrt/lede device should not stop retrying to establish the connection. With the current limit of 5 retries, there is a user interaction required, which isn't really what you want when the device should simply do everything to keep the vpn connection up. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* utils/tcpdump: Rework URLsDaniel Engberg2017-03-221-2/+2
| | | | | | | Add actual mirror and use main site as last resport Source: http://www.tcpdump.org/mirrors.html Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* libs/libpcap: Rework URLsDaniel Engberg2017-03-221-1/+2
| | | | | | | Add mirror and use main site as last resort. Source: http://www.tcpdump.org/mirrors.html Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* utils/util-linux: Update to 2.29.2Daniel Engberg2017-03-223-42/+8
| | | | | | | | | Update util-linux to 2.29.2 Remote 0001-fix-uClibc-ng-scanf-check.patch as it's been merged upstream. Refresh patches Change ncurses to ncursesw to fix compilation and avoid confusion Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* libs/openssl: Refresh mirror listDaniel Engberg2017-03-221-5/+6
| | | | | | | Refresh mirror list, some doesn't offer OpenSSL and add main site as last resort. Source: https://www.openssl.org/source/mirror.html Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: fix builds with kmod-drm-vc4 and kmod-backlight enabledRafał Miłecki2017-03-221-0/+4
| | | | | | | This fixes: JDI LT070ME05000 WUXGA DSI panel (DRM_PANEL_JDI_LT070ME05000) [N/m/?] (NEW) aborted! Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm2708: add kmod-drm-vc4 packageRafał Miłecki2017-03-212-0/+20
| | | | | | It includes vc4 driver for Broadcom VideoCore IV GPU. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* umdns: update to the version 2017-03-21Rafał Miłecki2017-03-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | This includes following changes: 480d7bc Fix sending unicast questions on cache expire a0403cd Keep source sockaddr for every cached DNS record 1478293 Fix code freeing cached non-A(AAA) records too early 9f1cc22 Fix replying to "QU" questions received on unicast interface 943bedb Fix reading port of incoming packets c725494 Use MCAST_PORT define for port 5353 ce7e9e9 Use one define for DNS-Based Service Discovery service name e1bacef Drop entries cached for interface we're going to delete 496aeba Fix comment typo in cache_gc_timer f89986b Fix refreshing cached A(AAA) records that expire Previous updates made umdns work as expected on startup but there were still many bugs. They were mostly related to runtime - cache management and requests + responses. E.g. umdns was never able to send question on DNS record expire. It was also ignoring all incoming unicast questions. Since these issues are quite serious it makes sense to backport this update to the stable branch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: update to git HEAD versionHans Dedecker2017-03-211-3/+3
| | | | | | | | a032166 interface-ip: set prefix indicator flag when IPv6 prefix lifetime changes b4f8984 system-linux: parse vti specific settings as nested json data object 7e3b89a system-linux: parse gre specific settings as nested json data object Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* vti: add vti specific settings as nested json objectHans Dedecker2017-03-212-2/+7
| | | | | | Add vti specific settings ikey and okey as a nested data json object Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gre: add gre specific settings as nested json objectHans Dedecker2017-03-212-2/+11
| | | | | | | Add gre specific settings ikey, okey, iseqno, oseqno, icsum and ocsum as a nested data json object Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: brcmfmac: backport patches pushed on 2017-03-20Rafał Miłecki2017-03-2111-5/+756
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update bcma including recent changes for 4.12Rafał Miłecki2017-03-214-4/+74
| | | | | | | This adds support for describing GPIO chips placed on PCIe cards. Thanks to this we get working 2.4 GHz LED on Tenda AC9. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move disabling DRM symbols to the config fileRafał Miłecki2017-03-212-33/+24
| | | | | | | This is the standard way we handle this. Please note (it seems) I could drop few symbols as they are hidden under (disabled) DRM_LEGACY now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: video: add kmod-i2c-core dependency to kmod-drmRafał Miłecki2017-03-211-1/+1
| | | | | | | | For targets with i2c not built-in this fixes following error: Package kmod-drm is missing dependencies for the following libraries: i2c-core.ko Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: disable CONFIG_BCM_IPROC_ADC by defaultRafał Miłecki2017-03-211-0/+1
| | | | | | | This fixes compiling issue on bcm53xx target with kmod-iio-core: Broadcom IPROC ADC driver (BCM_IPROC_ADC) [N/m/?] (NEW) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* include: Add nomips16 CPU_SUBTYPEHauke Mehrtens2017-03-201-1/+3
| | | | | | | | | | This can be used to indicate that a target does not support the optional mips16 extension even when it is a mips32r2 or later CPU. This will generate a separate toolchain and a separate package folder, e.g. mips_24kc_nomips16 Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* scripts: only generate config from feature flag if fully matchHauke Mehrtens2017-03-201-31/+31
| | | | | | | | | Without this change the code checked if the string was contained in the feature option and not if the string matches the complete word. This only removes the nand option from the omap24xx target, the other changes are only removing options which were added twice. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* tools/upx: Remove from repoDaniel Engberg2017-03-203-193/+0
| | | | | | Remove upx from repo, it hasn't been used for a very long time and serves little to no purpose. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* lzo: Update to 2.10Daniel Engberg2017-03-201-2/+2
| | | | | | Update lzo to 2.10 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* iperf3: Update to 3.1.7Daniel Engberg2017-03-201-2/+2
| | | | | | Update iperf3 to 3.1.7 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/coreutils: Update to 8.27Daniel Engberg2017-03-201-2/+2
| | | | | | Update coreutils to 8.27 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/libressl: Update to 2.5.1Daniel Engberg2017-03-201-2/+2
| | | | | | Update libressl to 2.5.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/dosfstools: Update to 4.1Daniel Engberg2017-03-203-38/+4
| | | | | | | | | Update to 4.1 Remove 0001-mkfs-Default-to-64-32-heads-sectors-for-targets-smal.patch as it's included in upstream repo. Refresh patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/binutils: Add binutils 2.28Daniel Engberg2017-03-207-0/+110
| | | | | | Add binutils 2.28 to repo Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/boot: update uboot-kirkwood to 2017.03Paul Wassi2017-03-209-29/+30
| | | | | | Bump uboot-kirkwood to upstream release 2017.03 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ramips: clean kernel config symbol conflicts for MT7688 PWMFurong Xu2017-03-202-6/+0
| | | | | | pwm-mediatek should be selected in Other Modules submenu, not default to yes. Signed-off-by: Furong Xu <xfr@outlook.com>
* tools/sed: Update to 4.4Daniel Engberg2017-03-202-28/+3
| | | | | | Update sed to 4.4 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ramips: fix switch port mapping for ZBT-WE2026Vaclav Svoboda2017-03-201-2/+2
| | | | | | This patch fixes switch port mapping for Zbtlink ZBT-WE2026. Signed-off-by: Vaclav Svoboda <svoboda@neng.cz>
* ipq806x: support independent core clocks in cpufreq with kernel 4.9+Hannu Nyman2017-03-202-46/+57
| | | | | | | | | | | | | Add back support for the independent_clocks definition that has been removed between kernel 4.4 and 4.9 by upstream commits eb96924acddc709db58221c210ca05cd9effb1df and e86eee6bc2aaa6b3637f6497b26beee09a91bde9 * extend the new cpufreq_dt_platform_data definition in cpufreq-dt.h * revert the removal of its usage in cpufreq-dt.c * use new cpufreq-dt.h in qcom-cpufreq.c Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ipq806x: route gpio interrupts to APPS processor through scm firmwarePavel Kubelun2017-03-201-0/+166
| | | | | | | | | For IPQ806x targets, TZ protects the registers that are used to configure the routing of interrupts to a target processor. To resolve this, this patch uses scm call to route GPIO interrupts to application processor. Also the scm call interface is changed. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: remove scm firmware clocksPavel Kubelun2017-03-202-4/+167
| | | | | | | | | | | | | | At the moment as a workaround definition for scm firmware in DT is used as if it is apq8064 board. This leads to incomplete scm firmware initialization and as a result cpuidle driver fails to configure. By design unlike other qcom boards ipq do not use clocks to connect to scm. Considering this we're removing from DT and scm driver clocks for ipq boards. As a result cpuidle does not produce errors about failed configuration anymore. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* iproute2: fix ip monitor can't work when NET_NS is not enabledYousong Zhou2017-03-192-1/+41
| | | | | | | | The bug appeared in v4.1.0 and was fixed since v4.8.0 Fixes FS#620 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* bcm53xx: switch to kernel 4.9Rafał Miłecki2017-03-181-1/+1
| | | | | | | With iproc regression fixed and GIC interrupts in DTS updated it seems we can safely start using 4.9. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: fix high cpu usage / hang in prereq-build.mkFelix Fietkau2017-03-181-1/+0
| | | | | | host-build.mk should not be included for prereq Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: backport BCM5301X patchesRafał Miłecki2017-03-1818-4/+1950
| | | | | | | This fixes GIC interrupts (required before switching to 4.9), adds few new entires & introduces DTS for Archer C5. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dnsmasq: don't point --resolv-file to default location unconditionallyPhilip Prindeville2017-03-181-3/+3
| | | | | | | If noresolv is set, we should not generate a --resolv-file parameter. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [minor cleanup]
* build: add devel option to store build config in firmwareVitaly Chekryzhev2017-03-182-0/+10
| | | | | | Store config.seed in firmware /etc/build.config Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* build: prepare config.seed before package compilationVitaly Chekryzhev2017-03-181-1/+2
| | | | Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* lldpd: bump to 0.9.6Stijn Tintel2017-03-181-2/+2
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mt76: update to the latest version, fixes Mesh/IBSS crypto supportFelix Fietkau2017-03-171-3/+3
| | | | | | | | 9f02db7 mt76x2: fall back to software crypto for IBSS/Mesh per-sta GTK 4a54ab3 mt7603: fall back to software crypto for IBSS/Mesh per-sta GTK 712b8e8 mac80211: claim RSN IBSS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* perf: fix build with kernel 4.9Mathias Kresin2017-03-171-0/+2
| | | | | | | The musl workaround isn't required anymore and causes build errors with kernel 4.9 when applied. Signed-off-by: Mathias Kresin <dev@kresin.me>