aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/imx6/config-3.12358
-rw-r--r--target/linux/imx6/patches-3.12/0001-ARM-dts-imx6qdl-add-pcie-device-node.patch38
-rw-r--r--target/linux/imx6/patches-3.12/0002-ARM-imx6q-Add-pll4_audio_div-to-clock-tree.patch60
-rw-r--r--target/linux/imx6/patches-3.12/0003-ARM-imx-add-soc-revision-helper-functions.patch52
-rw-r--r--target/linux/imx6/patches-3.12/0004-ARM-imx6q-use-common-soc-revision-helpers.patch93
-rw-r--r--target/linux/imx6/patches-3.12/0005-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch58
-rw-r--r--target/linux/imx6/patches-3.12/0006-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch38
-rw-r--r--target/linux/imx6/patches-3.12/0007-ARM-dts-added-several-new-imx-pinmux-groups.patch115
-rw-r--r--target/linux/imx6/patches-3.12/0008-ARM-dts-add-Gateworks-Ventana-support.patch2240
-rw-r--r--target/linux/imx6/patches-3.12/0009-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch60
-rw-r--r--target/linux/imx6/patches-3.12/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch39
-rw-r--r--target/linux/imx6/patches-3.12/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch620
-rw-r--r--target/linux/imx6/patches-3.12/0030-pcie-designware-fix-io-transfers.patch58
-rw-r--r--target/linux/imx6/patches-3.12/0031-PCI-imx6-init-must-be-early.patch24
-rw-r--r--target/linux/imx6/patches-3.12/0032-PCI-imx6-fix-imprecise-abort-handler.patch36
-rw-r--r--target/linux/imx6/patches-3.12/0033-PCI-imx6-increase-link-startup.patch24
-rw-r--r--target/linux/imx6/patches-3.12/0034-PCI-imx6-add-support-for-legacy-irqs.patch43
-rw-r--r--target/linux/imx6/patches-3.12/0040-i2c-imx-retry-on-NAK.patch38
-rw-r--r--target/linux/imx6/patches-3.12/0050-sky2-allow-mac-to-come-from-dt.patch69
-rw-r--r--target/linux/imx6/patches-3.12/100-bootargs.patch11
20 files changed, 0 insertions, 4074 deletions
diff --git a/target/linux/imx6/config-3.12 b/target/linux/imx6/config-3.12
deleted file mode 100644
index 445a0cad43..0000000000
--- a/target/linux/imx6/config-3.12
+++ /dev/null
@@ -1,358 +0,0 @@
-CONFIG_AHCI_IMX=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_OPP=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_IMX6Q_CPUFREQ=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_PL01X is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-# CONFIG_DGNC is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FEC=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CPUFREQ_CPU0=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_NET_UTILS=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IMX_ANATOP=y
-CONFIG_HAVE_IMX_GPC=y
-CONFIG_HAVE_IMX_MMDC=y
-CONFIG_HAVE_IMX_SRC=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-# CONFIG_IMX2_WDT is not set
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MACH_EUKREA_CPUIMX51SD is not set
-# CONFIG_MACH_IMX51_DT is not set
-# CONFIG_MACH_MX51_BABBAGE is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-# CONFIG_MXC_DEBUG_BOARD is not set
-# CONFIG_MXC_IRQ_PRIOR is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_DMA is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_RX_BUSY_POLL=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_IMX6=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX=y
-CONFIG_PINCTRL_IMX6Q=y
-CONFIG_PINCTRL_IMX6SL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PFUZE100=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_RFKILL_REGULATOR is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-# CONFIG_SOC_IMX53 is not set
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_STMP_DEVICE=y
-CONFIG_STOP_MACHINE=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-# CONFIG_USB_MXS_PHY is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-# CONFIG_ZBUD is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/imx6/patches-3.12/0001-ARM-dts-imx6qdl-add-pcie-device-node.patch b/target/linux/imx6/patches-3.12/0001-ARM-dts-imx6qdl-add-pcie-device-node.patch
deleted file mode 100644
index d9c7377366..0000000000
--- a/target/linux/imx6/patches-3.12/0001-ARM-dts-imx6qdl-add-pcie-device-node.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3a57291fa4ca7f7647d826f5b47082ef306d839f Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Thu, 26 Sep 2013 10:51:09 +0800
-Subject: [PATCH] ARM: dts: imx6qdl: add pcie device node
-
-Add pcie device node for imx6qdl.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -116,6 +116,22 @@
- arm,data-latency = <4 2 3>;
- };
-
-+ pcie: pcie@0x01000000 {
-+ compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
-+ reg = <0x01ffc000 0x4000>; /* DBI */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
-+ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
-+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
-+ num-lanes = <1>;
-+ interrupts = <0 123 0x04>;
-+ clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
-+ clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
-+ status = "disabled";
-+ };
-+
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 0x04>;
diff --git a/target/linux/imx6/patches-3.12/0002-ARM-imx6q-Add-pll4_audio_div-to-clock-tree.patch b/target/linux/imx6/patches-3.12/0002-ARM-imx6q-Add-pll4_audio_div-to-clock-tree.patch
deleted file mode 100644
index 658b0c9ebf..0000000000
--- a/target/linux/imx6/patches-3.12/0002-ARM-imx6q-Add-pll4_audio_div-to-clock-tree.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 64990a431469a58b2949aca5be9d69e220d53892 Mon Sep 17 00:00:00 2001
-From: Nicolin Chen <b42378@freescale.com>
-Date: Fri, 23 Aug 2013 19:20:34 +0800
-Subject: [PATCH] ARM: imx6q: Add pll4_audio_div to clock tree
-
-There's a pll4_audio_div clock, an extra divider for pll4, missing
-in current clock tree, thus add it.
-
-Signed-off-by: Nicolin Chen <b42378@freescale.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/clk-imx6q.c | 9 +++++----
- 2 files changed, 6 insertions(+), 4 deletions(-)
-
---- a/arch/arm/mach-imx/clk-imx6q.c
-+++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -182,7 +182,7 @@ static const char *periph2_clk2_sels[] =
- static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
- static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
- static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
--static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
-+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
- static const char *gpu_axi_sels[] = { "axi", "ahb", };
- static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
- static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-@@ -196,7 +196,7 @@ static const char *ipu2_di0_sels[] = { "
- static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
- static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
- static const char *pcie_axi_sels[] = { "axi", "ahb", };
--static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
-+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
- static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
- static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
- static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
-@@ -205,7 +205,7 @@ static const char *vdo_axi_sels[] = { "a
- static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
- static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
- "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
-- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
-+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
- static const char *cko2_sels[] = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
- "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
-@@ -251,7 +251,7 @@ enum mx6q_clks {
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
-- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
-+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, clk_max
- };
-
- static struct clk *clk[clk_max];
-@@ -359,6 +359,7 @@ static void __init imx6q_clocks_init(str
- clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
-
- clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
-+ clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
-
diff --git a/target/linux/imx6/patches-3.12/0003-ARM-imx-add-soc-revision-helper-functions.patch b/target/linux/imx6/patches-3.12/0003-ARM-imx-add-soc-revision-helper-functions.patch
deleted file mode 100644
index 20ea995a88..0000000000
--- a/target/linux/imx6/patches-3.12/0003-ARM-imx-add-soc-revision-helper-functions.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From bfefdff8f91aa0a9ff1291d18d54498af276a6e5 Mon Sep 17 00:00:00 2001
-From: Shawn Guo <shawn.guo@linaro.org>
-Date: Tue, 13 Aug 2013 13:54:02 +0800
-Subject: [PATCH] ARM: imx: add soc revision helper functions
-
-Similar to what we do for cpu type, the patch adds helper functions
-imx_set_soc_revision() and imx_get_soc_revision() to maintain
-imx_soc_revision in cpu.c.
-
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/common.h | 2 ++
- arch/arm/mach-imx/cpu.c | 12 ++++++++++++
- 2 files changed, 14 insertions(+)
-
---- a/arch/arm/mach-imx/common.h
-+++ b/arch/arm/mach-imx/common.h
-@@ -81,6 +81,8 @@ extern int imx6q_revision(void);
- extern int mx53_display_revision(void);
- extern void imx_set_aips(void __iomem *);
- extern int mxc_device_init(void);
-+void imx_set_soc_revision(unsigned int rev);
-+unsigned int imx_get_soc_revision(void);
-
- enum mxc_cpu_pwr_mode {
- WAIT_CLOCKED, /* wfi only */
---- a/arch/arm/mach-imx/cpu.c
-+++ b/arch/arm/mach-imx/cpu.c
-@@ -8,11 +8,23 @@
- unsigned int __mxc_cpu_type;
- EXPORT_SYMBOL(__mxc_cpu_type);
-
-+static unsigned int imx_soc_revision;
-+
- void mxc_set_cpu_type(unsigned int type)
- {
- __mxc_cpu_type = type;
- }
-
-+void imx_set_soc_revision(unsigned int rev)
-+{
-+ imx_soc_revision = rev;
-+}
-+
-+unsigned int imx_get_soc_revision(void)
-+{
-+ return imx_soc_revision;
-+}
-+
- void imx_print_silicon_rev(const char *cpu, int srev)
- {
- if (srev == IMX_CHIP_REVISION_UNKNOWN)
diff --git a/target/linux/imx6/patches-3.12/0004-ARM-imx6q-use-common-soc-revision-helpers.patch b/target/linux/imx6/patches-3.12/0004-ARM-imx6q-use-common-soc-revision-helpers.patch
deleted file mode 100644
index e971f85d9a..0000000000
--- a/target/linux/imx6/patches-3.12/0004-ARM-imx6q-use-common-soc-revision-helpers.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 3f75978b3742157853618c5c6dd4a5f49aa950b1 Mon Sep 17 00:00:00 2001
-From: Shawn Guo <shawn.guo@linaro.org>
-Date: Tue, 13 Aug 2013 14:10:29 +0800
-Subject: [PATCH] ARM: imx6q: use common soc revision helpers
-
-It calls imx_set_soc_revision() to set up soc revision in
-imx6q_init_revision(), and replaces all the occurrences of
-imx6q_revision() with common helper imx_get_soc_revision().
-
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/clk-imx6q.c | 5 +++--
- arch/arm/mach-imx/common.h | 1 -
- arch/arm/mach-imx/mach-imx6q.c | 13 ++++---------
- 3 files changed, 7 insertions(+), 12 deletions(-)
-
---- a/arch/arm/mach-imx/clk-imx6q.c
-+++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -300,7 +300,7 @@ static void __init imx6q_clocks_init(str
- WARN_ON(!base);
-
- /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
-- if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
-+ if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
- post_div_table[1].div = 1;
- post_div_table[2].div = 1;
- video_div_table[1].div = 1;
-@@ -574,7 +574,8 @@ static void __init imx6q_clocks_init(str
- clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
- clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
-
-- if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
-+ if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
-+ cpu_is_imx6dl()) {
- clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
- }
---- a/arch/arm/mach-imx/common.h
-+++ b/arch/arm/mach-imx/common.h
-@@ -77,7 +77,6 @@ extern void mxc_restart(enum reboot_mode
- extern void mxc_arch_reset_init(void __iomem *);
- extern void mxc_arch_reset_init_dt(void);
- extern int mx53_revision(void);
--extern int imx6q_revision(void);
- extern int mx53_display_revision(void);
- extern void imx_set_aips(void __iomem *);
- extern int mxc_device_init(void);
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -40,16 +40,10 @@
- #include "cpuidle.h"
- #include "hardware.h"
-
--static u32 chip_revision;
--
--int imx6q_revision(void)
--{
-- return chip_revision;
--}
--
- static void __init imx6q_init_revision(void)
- {
- u32 rev = imx_anatop_get_digprog();
-+ u32 chip_revision;
-
- switch (rev & 0xff) {
- case 0:
-@@ -66,6 +60,7 @@ static void __init imx6q_init_revision(v
- }
-
- mxc_set_cpu_type(rev >> 16 & 0xff);
-+ imx_set_soc_revision(chip_revision);
- }
-
- static void imx6q_restart(enum reboot_mode mode, const char *cmd)
-@@ -269,7 +264,7 @@ static void __init imx6q_init_late(void)
- * WAIT mode is broken on TO 1.0 and 1.1, so there is no point
- * to run cpuidle on them.
- */
-- if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
-+ if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
- imx6q_cpuidle_init();
-
- if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
-@@ -298,7 +293,7 @@ static void __init imx6q_timer_init(void
- of_clk_init(NULL);
- clocksource_of_init();
- imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-- imx6q_revision());
-+ imx_get_soc_revision());
- }
-
- static const char *imx6q_dt_compat[] __initdata = {
diff --git a/target/linux/imx6/patches-3.12/0005-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch b/target/linux/imx6/patches-3.12/0005-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
deleted file mode 100644
index 256dea7edc..0000000000
--- a/target/linux/imx6/patches-3.12/0005-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From bf22172158cd6dcc5be6dc286ff5c33794dd0ae8 Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Mon, 16 Sep 2013 08:20:52 +0000
-Subject: [PATCH] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q
-
-The i.MX6 has two general-purpose LVDS clocks that can be driven
-from a variety of sources. This patch adds a mux and a gate for
-both of these clocks.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/clk-imx6q.c | 20 +++++++++++++++++++-
- 2 files changed, 23 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-imx/clk-imx6q.c
-+++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -217,6 +217,11 @@ static const char *cko2_sels[] = {
- "uart_serial", "spdif", "asrc", "hsi_tx",
- };
- static const char *cko_sels[] = { "cko1", "cko2", };
-+static const char *lvds_sels[] = {
-+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
-+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
-+ "pcie_ref", "sata_ref",
-+};
-
- enum mx6q_clks {
- dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
-@@ -251,7 +256,8 @@ enum mx6q_clks {
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
-- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, clk_max
-+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
-+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
- };
-
- static struct clk *clk[clk_max];
-@@ -342,6 +348,18 @@ static void __init imx6q_clocks_init(str
- base + 0xe0, 0, 2, 0, clk_enet_ref_table,
- &imx_ccm_lock);
-
-+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-+
-+ /*
-+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
-+ * independently configured as clock inputs or outputs. We treat
-+ * the "output_enable" bit as a gate, even though it's really just
-+ * enabling clock output.
-+ */
-+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
-+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
-+
- /* name parent_name reg idx */
- clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
diff --git a/target/linux/imx6/patches-3.12/0006-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch b/target/linux/imx6/patches-3.12/0006-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch
deleted file mode 100644
index af955c96d3..0000000000
--- a/target/linux/imx6/patches-3.12/0006-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 74b8031307c5d33d36742c26dd0921991bd5a255 Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Thu, 26 Sep 2013 10:45:35 +0800
-Subject: [PATCH] ARM: imx6q: clock and Kconfig update for PCIe support
-
-Update imx6q clock initialization and Kconfig for PCIe support.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/Kconfig | 2 ++
- arch/arm/mach-imx/clk-imx6q.c | 4 ++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/mach-imx/Kconfig
-+++ b/arch/arm/mach-imx/Kconfig
-@@ -801,6 +801,8 @@ config SOC_IMX6Q
- select HAVE_IMX_SRC
- select HAVE_SMP
- select MFD_SYSCON
-+ select MIGHT_HAVE_PCI
-+ select PCI_DOMAINS if PCI
- select PINCTRL
- select PINCTRL_IMX6Q
- select PL310_ERRATA_588369 if CACHE_PL310
---- a/arch/arm/mach-imx/clk-imx6q.c
-+++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -623,6 +623,10 @@ static void __init imx6q_clocks_init(str
- if (ret)
- pr_warn("failed to set up CLKO: %d\n", ret);
-
-+ /* All existing boards with PCIe use LVDS1 */
-+ if (IS_ENABLED(CONFIG_PCI_IMX6))
-+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
-+
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
-
diff --git a/target/linux/imx6/patches-3.12/0007-ARM-dts-added-several-new-imx-pinmux-groups.patch b/target/linux/imx6/patches-3.12/0007-ARM-dts-added-several-new-imx-pinmux-groups.patch
deleted file mode 100644
index 5ec38ceef9..0000000000
--- a/target/linux/imx6/patches-3.12/0007-ARM-dts-added-several-new-imx-pinmux-groups.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 3f7fbfad3edc92227b9ae91050837a6d1de374f5 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:25 -0700
-Subject: [PATCH] ARM: dts: added several new imx-pinmux groups
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -622,6 +622,14 @@
- MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
- >;
- };
-+
-+ pinctrl_audmux_4: audmux-4 {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x80000000
-+ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x80000000
-+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
-+ >;
-+ };
- };
-
- ecspi1 {
-@@ -794,6 +802,28 @@
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-+
-+ /* No Strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
- };
-
- hdmi_hdcp {
-@@ -1035,6 +1065,13 @@
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart2 {
-@@ -1053,6 +1090,13 @@
- MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart2_3: uart2grp-3 {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart3 {
-@@ -1073,6 +1117,13 @@
- MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
- >;
- };
-+
-+ pinctrl_uart3_3: uart3grp-3 {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -1083,6 +1134,15 @@
- >;
- };
- };
-+
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
diff --git a/target/linux/imx6/patches-3.12/0008-ARM-dts-add-Gateworks-Ventana-support.patch b/target/linux/imx6/patches-3.12/0008-ARM-dts-add-Gateworks-Ventana-support.patch
deleted file mode 100644
index d1406cf068..0000000000
--- a/target/linux/imx6/patches-3.12/0008-ARM-dts-add-Gateworks-Ventana-support.patch
+++ /dev/null
@@ -1,2240 +0,0 @@
-From 02b02b9176fc62b97e58487e35af7df782a0047d Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:26 -0700
-Subject: [PATCH] ARM: dts: add Gateworks Ventana support
-
-The Gateworks Ventana product family consists of several baseboard designs
-based on the Freescale i.MX6 family of processors. Each baseboard has a
-different set of possible features.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/Makefile | 9 +
- arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw5400-a.dts | 443 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++
- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 272 ++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 373 +++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 429 +++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 457 ++++++++++++++++++++++++++++++++++
- 14 files changed, 2147 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -133,10 +133,19 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx53-mba53.dtb \
- imx53-qsb.dtb \
- imx53-smd.dtb \
-+ imx6dl-gw51xx.dtb \
-+ imx6dl-gw52xx.dtb \
-+ imx6dl-gw53xx.dtb \
-+ imx6dl-gw54xx.dtb \
- imx6dl-sabreauto.dtb \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
-+ imx6q-gw51xx.dtb \
-+ imx6q-gw52xx.dtb \
-+ imx6q-gw53xx.dtb \
-+ imx6q-gw5400-a.dtb \
-+ imx6q-gw54xx.dtb \
- imx6q-phytec-pbab01.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW51XX";
-+ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW52XX";
-+ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW53XX";
-+ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
-+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW51XX";
-+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW52XX";
-+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW53XX";
-+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
-@@ -0,0 +1,443 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana GW5400-A";
-+ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-+
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ i2c0 = &i2c1;
-+ i2c1 = &i2c2;
-+ i2c2 = &i2c3;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ spi0 = &ecspi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 5 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&ecspi1 {
-+ fsl,spi-num-chipselects = <1>;
-+ cs-gpios = <&gpio3 19 0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi1_1>;
-+ status = "okay";
-+
-+ flash: m25p80@0 {
-+ compatible = "sst,w25q256";
-+ spi-max-frequency = <30000000>;
-+ reg = <0>;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: mma8450@1c {
-+ compatible = "fsl,mma8450";
-+ reg = <0x1c>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+ lvds-channel@0 {
-+ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW54XX";
-+ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -0,0 +1,272 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: 5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ >;
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 0 0>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -0,0 +1,373 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove this fixed regulator once ltc3676__sw2 driver available */
-+ reg_1p8v: 1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: 5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x13>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 169>;
-+ VDDA-supply = <&reg_1p8v>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
-+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+ lvds-channel@0 {
-+ crtcs = <&ipu1 0>, <&ipu1 1>;
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -0,0 +1,429 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove when pmic 1p8 regulator available */
-+ reg_1p8v: 1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pciclkgen: si53156@6b {
-+ compatible = "sil,si53156";
-+ reg = <0x6b>;
-+ };
-+
-+ pciswitch: pex8606@3f {
-+ compatible = "plx,pex8606";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ /* VDD_SOC */
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_ARM */
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_DDR */
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_2P5 */
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_HIGH */
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&reg_1p8v>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <11 2>; /* gpio1_11 active low */
-+ wakeup-gpios = <&gpio1 11 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
-+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
-+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@1 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -0,0 +1,457 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = &eth1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = &eth1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>; /* AUD4<->sgtl5000 */
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <&reg_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@1 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&ssi2 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
diff --git a/target/linux/imx6/patches-3.12/0009-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch b/target/linux/imx6/patches-3.12/0009-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch
deleted file mode 100644
index 4ac15ca05b..0000000000
--- a/target/linux/imx6/patches-3.12/0009-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 079441036b20d9f3d23d1e96f0681b99349de05a Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:28 -0700
-Subject: [PATCH] imx: add PCI fixup for PEX860X on Gateworks board
-
-The PEX860X has GPIO's which are used for PCI Reset lines on the
-Gateworks Ventana boards. The GPIO's need to be set as output
-level high so as to allow the PCIe devices to come out of reset.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/mach-imx6q.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -26,6 +26,7 @@
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/opp.h>
-+#include <linux/pci.h>
- #include <linux/phy.h>
- #include <linux/reboot.h>
- #include <linux/regmap.h>
-@@ -134,6 +135,34 @@ static int ksz9031rn_phy_fixup(struct ph
- return 0;
- }
-
-+/*
-+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
-+ * as they are used for slots1-7 PERST#
-+ */
-+static void ventana_pciesw_early_fixup(struct pci_dev *dev)
-+{
-+ u32 dw;
-+
-+ if (!of_machine_is_compatible("gw,ventana"))
-+ return;
-+
-+ if (dev->devfn != 0)
-+ return;
-+
-+ pci_read_config_dword(dev, 0x62c, &dw);
-+ dw |= 0xaaa8; // GPIO1-7 outputs
-+ pci_write_config_dword(dev, 0x62c, dw);
-+
-+ pci_read_config_dword(dev, 0x644, &dw);
-+ dw |= 0xfe; // GPIO1-7 output high
-+ pci_write_config_dword(dev, 0x644, dw);
-+
-+ msleep(100);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
-+
- static int ar8031_phy_fixup(struct phy_device *dev)
- {
- u16 val;
diff --git a/target/linux/imx6/patches-3.12/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch b/target/linux/imx6/patches-3.12/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
deleted file mode 100644
index 3dce8d9871..0000000000
--- a/target/linux/imx6/patches-3.12/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 8d6a35fb13406f87d926fffeee0d70360ce3077d Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Thu, 26 Sep 2013 11:24:46 +0800
-Subject: [PATCH] ARM: imx6q: Add PCIe bits to GPR syscon definition
-
-PCIe requires additional bits be defined for GPR8 and GPR12.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
----
- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-@@ -241,6 +241,12 @@
-
- #define IMX6Q_GPR5_L2_CLK_STOP BIT(8)
-
-+#define IMX6Q_GPR8_TX_SWING_LOW (0x7f << 25)
-+#define IMX6Q_GPR8_TX_SWING_FULL (0x7f << 18)
-+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB (0x3f << 12)
-+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB (0x3f << 6)
-+#define IMX6Q_GPR8_TX_DEEMPH_GEN1 (0x3f << 0)
-+
- #define IMX6Q_GPR9_TZASC2_BYP BIT(1)
- #define IMX6Q_GPR9_TZASC1_BYP BIT(0)
-
-@@ -273,7 +279,9 @@
- #define IMX6Q_GPR12_ARMP_AHB_CLK_EN BIT(26)
- #define IMX6Q_GPR12_ARMP_ATB_CLK_EN BIT(25)
- #define IMX6Q_GPR12_ARMP_APB_CLK_EN BIT(24)
-+#define IMX6Q_GPR12_DEVICE_TYPE (0xf << 12)
- #define IMX6Q_GPR12_PCIE_CTL_2 BIT(10)
-+#define IMX6Q_GPR12_LOS_LEVEL (0x1f << 4)
-
- #define IMX6Q_GPR13_SDMA_STOP_REQ BIT(30)
- #define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)
diff --git a/target/linux/imx6/patches-3.12/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch b/target/linux/imx6/patches-3.12/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
deleted file mode 100644
index 46a46606a5..0000000000
--- a/target/linux/imx6/patches-3.12/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
+++ /dev/null
@@ -1,620 +0,0 @@
-From bb38919ec56e0758c3ae56dfc091dcde1391353e Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Thu, 26 Sep 2013 11:24:47 +0800
-Subject: [PATCH] PCI: imx6: Add support for i.MX6 PCIe controller
-
-Add support for the PCIe port present on the i.MX6 family of controllers.
-These use the Synopsis Designware core tied to their own PHY.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- drivers/pci/host/Kconfig | 6 +
- drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pci-imx6.c | 575 +++++++++++++++++++++
- 4 files changed, 588 insertions(+), 1 deletion(-)
- create mode 100644 drivers/pci/host/pci-imx6.c
-
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -15,6 +15,12 @@ config PCI_EXYNOS
- select PCIEPORTBUS
- select PCIE_DW
-
-+config PCI_IMX6
-+ bool "Freescale i.MX6 PCIe controller"
-+ depends on SOC_IMX6Q
-+ select PCIEPORTBUS
-+ select PCIE_DW
-+
- config PCI_TEGRA
- bool "NVIDIA Tegra PCIe controller"
- depends on ARCH_TEGRA
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_PCIE_DW) += pcie-designware.o
- obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
-+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
- obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
- obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
---- /dev/null
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -0,0 +1,575 @@
-+/*
-+ * PCIe host controller driver for Freescale i.MX6 SoCs
-+ *
-+ * Copyright (C) 2013 Kosagi
-+ * http://www.kosagi.com
-+ *
-+ * Author: Sean Cross <xobs@kosagi.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-+#include <linux/module.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/resource.h>
-+#include <linux/signal.h>
-+#include <linux/types.h>
-+
-+#include "pcie-designware.h"
-+
-+#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
-+
-+struct imx6_pcie {
-+ int reset_gpio;
-+ int power_on_gpio;
-+ int wake_up_gpio;
-+ int disable_gpio;
-+ struct clk *lvds_gate;
-+ struct clk *sata_ref_100m;
-+ struct clk *pcie_ref_125m;
-+ struct clk *pcie_axi;
-+ struct pcie_port pp;
-+ struct regmap *iomuxc_gpr;
-+ void __iomem *mem_base;
-+};
-+
-+/* PCIe Port Logic registers (memory-mapped) */
-+#define PL_OFFSET 0x700
-+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
-+
-+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
-+#define PCIE_PHY_CTRL_DATA_LOC 0
-+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
-+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
-+#define PCIE_PHY_CTRL_WR_LOC 18
-+#define PCIE_PHY_CTRL_RD_LOC 19
-+
-+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
-+#define PCIE_PHY_STAT_ACK_LOC 16
-+
-+/* PHY registers (not memory-mapped) */
-+#define PCIE_PHY_RX_ASIC_OUT 0x100D
-+
-+#define PHY_RX_OVRD_IN_LO 0x1005
-+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
-+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
-+
-+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
-+{
-+ u32 val;
-+ u32 max_iterations = 10;
-+ u32 wait_counter = 0;
-+
-+ do {
-+ val = readl(dbi_base + PCIE_PHY_STAT);
-+ val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
-+ wait_counter++;
-+
-+ if (val == exp_val)
-+ return 0;
-+
-+ udelay(1);
-+ } while (wait_counter < max_iterations);
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
-+{
-+ u32 val;
-+ int ret;
-+
-+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(val, dbi_base + PCIE_PHY_CTRL);
-+
-+ val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
-+ writel(val, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(val, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
-+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
-+{
-+ u32 val, phy_ctl;
-+ int ret;
-+
-+ ret = pcie_phy_wait_ack(dbi_base, addr);
-+ if (ret)
-+ return ret;
-+
-+ /* assert Read signal */
-+ phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
-+ writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ val = readl(dbi_base + PCIE_PHY_STAT);
-+ *data = val & 0xffff;
-+
-+ /* deassert Read signal */
-+ writel(0x00, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
-+{
-+ u32 var;
-+ int ret;
-+
-+ /* write addr */
-+ /* cap addr */
-+ ret = pcie_phy_wait_ack(dbi_base, addr);
-+ if (ret)
-+ return ret;
-+
-+ var = data << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* capture data */
-+ var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ /* deassert cap data */
-+ var = data << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* wait for ack de-assertion */
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ /* assert wr signal */
-+ var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* wait for ack */
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ /* deassert wr signal */
-+ var = data << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* wait for ack de-assertion */
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ writel(0x0, dbi_base + PCIE_PHY_CTRL);
-+
-+ return 0;
-+}
-+
-+/* Added for PCI abort handling */
-+static int imx6q_pcie_abort_handler(unsigned long addr,
-+ unsigned int fsr, struct pt_regs *regs)
-+{
-+ /*
-+ * If it was an imprecise abort, then we need to correct the
-+ * return address to be _after_ the instruction.
-+ */
-+ if (fsr & (1 << 10))
-+ regs->ARM_pc += 4;
-+ return 0;
-+}
-+
-+static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
-+{
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
-+
-+ gpio_set_value(imx6_pcie->reset_gpio, 0);
-+ msleep(100);
-+ gpio_set_value(imx6_pcie->reset_gpio, 1);
-+
-+ return 0;
-+}
-+
-+static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
-+{
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+ int ret;
-+
-+ if (gpio_is_valid(imx6_pcie->power_on_gpio))
-+ gpio_set_value(imx6_pcie->power_on_gpio, 1);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
-+
-+ ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable sata_ref_100m\n");
-+ goto err_sata_ref;
-+ }
-+
-+ ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
-+ goto err_pcie_ref;
-+ }
-+
-+ ret = clk_prepare_enable(imx6_pcie->lvds_gate);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable lvds_gate\n");
-+ goto err_lvds_gate;
-+ }
-+
-+ ret = clk_prepare_enable(imx6_pcie->pcie_axi);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable pcie_axi\n");
-+ goto err_pcie_axi;
-+ }
-+
-+ /* allow the clocks to stabilize */
-+ usleep_range(200, 500);
-+
-+ return 0;
-+
-+err_pcie_axi:
-+ clk_disable_unprepare(imx6_pcie->lvds_gate);
-+err_lvds_gate:
-+ clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
-+err_pcie_ref:
-+ clk_disable_unprepare(imx6_pcie->sata_ref_100m);
-+err_sata_ref:
-+ return ret;
-+
-+}
-+
-+static void imx6_pcie_init_phy(struct pcie_port *pp)
-+{
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
-+
-+ /* configure constant input signal to the pcie ctrl and phy */
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
-+}
-+
-+static void imx6_pcie_host_init(struct pcie_port *pp)
-+{
-+ int count = 0;
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+
-+ imx6_pcie_assert_core_reset(pp);
-+
-+ imx6_pcie_init_phy(pp);
-+
-+ imx6_pcie_deassert_core_reset(pp);
-+
-+ dw_pcie_setup_rc(pp);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
-+
-+ while (!dw_pcie_link_up(pp)) {
-+ usleep_range(100, 1000);
-+ count++;
-+ if (count >= 10) {
-+ dev_err(pp->dev, "phy link never came up\n");
-+ dev_dbg(pp->dev,
-+ "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
-+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
-+ break;
-+ }
-+ }
-+
-+ return;
-+}
-+
-+static int imx6_pcie_link_up(struct pcie_port *pp)
-+{
-+ u32 rc, ltssm, rx_valid, temp;
-+
-+ /* link is debug bit 36, debug register 1 starts at bit 32 */
-+ rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
-+ if (rc)
-+ return -EAGAIN;
-+
-+ /*
-+ * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
-+ * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
-+ * If (MAC/LTSSM.state == Recovery.RcvrLock)
-+ * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
-+ * to gen2 is stuck
-+ */
-+ pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
-+ ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
-+
-+ if (rx_valid & 0x01)
-+ return 0;
-+
-+ if (ltssm != 0x0d)
-+ return 0;
-+
-+ dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
-+
-+ pcie_phy_read(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, &temp);
-+ temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
-+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
-+ pcie_phy_write(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, temp);
-+
-+ usleep_range(2000, 3000);
-+
-+ pcie_phy_read(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, &temp);
-+ temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
-+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
-+ pcie_phy_write(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, temp);
-+
-+ return 0;
-+}
-+
-+static struct pcie_host_ops imx6_pcie_host_ops = {
-+ .link_up = imx6_pcie_link_up,
-+ .host_init = imx6_pcie_host_init,
-+};
-+
-+static int imx6_add_pcie_port(struct pcie_port *pp,
-+ struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ pp->irq = platform_get_irq(pdev, 0);
-+ if (!pp->irq) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -ENODEV;
-+ }
-+
-+ pp->root_bus_nr = -1;
-+ pp->ops = &imx6_pcie_host_ops;
-+
-+ spin_lock_init(&pp->conf_lock);
-+ ret = dw_pcie_host_init(pp);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to initialize host\n");
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int __init imx6_pcie_probe(struct platform_device *pdev)
-+{
-+ struct imx6_pcie *imx6_pcie;
-+ struct pcie_port *pp;
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *dbi_base;
-+ int ret;
-+
-+ imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
-+ if (!imx6_pcie)
-+ return -ENOMEM;
-+
-+ pp = &imx6_pcie->pp;
-+ pp->dev = &pdev->dev;
-+
-+ /* Added for PCI abort handling */
-+ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
-+ "imprecise external abort");
-+
-+ dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!dbi_base) {
-+ dev_err(&pdev->dev, "dbi_base memory resource not found\n");
-+ return -ENODEV;
-+ }
-+
-+ pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
-+ if (IS_ERR(pp->dbi_base)) {
-+ dev_err(&pdev->dev, "unable to remap dbi_base\n");
-+ ret = PTR_ERR(pp->dbi_base);
-+ goto err;
-+ }
-+
-+ /* Fetch GPIOs */
-+ imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
-+ if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
-+ dev_err(&pdev->dev, "no reset-gpio defined\n");
-+ ret = -ENODEV;
-+ }
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->reset_gpio,
-+ GPIOF_OUT_INIT_LOW,
-+ "PCIe reset");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get reset gpio\n");
-+ goto err;
-+ }
-+
-+ imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
-+ if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->power_on_gpio,
-+ GPIOF_OUT_INIT_LOW,
-+ "PCIe power enable");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get power-on gpio\n");
-+ goto err;
-+ }
-+ }
-+
-+ imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
-+ if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->wake_up_gpio,
-+ GPIOF_IN,
-+ "PCIe wake up");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get wake-up gpio\n");
-+ goto err;
-+ }
-+ }
-+
-+ imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
-+ if (gpio_is_valid(imx6_pcie->disable_gpio)) {
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->disable_gpio,
-+ GPIOF_OUT_INIT_HIGH,
-+ "PCIe disable endpoint");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
-+ goto err;
-+ }
-+ }
-+
-+ /* Fetch clocks */
-+ imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
-+ if (IS_ERR(imx6_pcie->lvds_gate)) {
-+ dev_err(&pdev->dev,
-+ "lvds_gate clock select missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->lvds_gate);
-+ goto err;
-+ }
-+
-+ imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
-+ if (IS_ERR(imx6_pcie->sata_ref_100m)) {
-+ dev_err(&pdev->dev,
-+ "sata_ref_100m clock source missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->sata_ref_100m);
-+ goto err;
-+ }
-+
-+ imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
-+ if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
-+ dev_err(&pdev->dev,
-+ "pcie_ref_125m clock source missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->pcie_ref_125m);
-+ goto err;
-+ }
-+
-+ imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
-+ if (IS_ERR(imx6_pcie->pcie_axi)) {
-+ dev_err(&pdev->dev,
-+ "pcie_axi clock source missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->pcie_axi);
-+ goto err;
-+ }
-+
-+ /* Grab GPR config register range */
-+ imx6_pcie->iomuxc_gpr =
-+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-+ if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
-+ dev_err(&pdev->dev, "unable to find iomuxc registers\n");
-+ ret = PTR_ERR(imx6_pcie->iomuxc_gpr);
-+ goto err;
-+ }
-+
-+ ret = imx6_add_pcie_port(pp, pdev);
-+ if (ret < 0)
-+ goto err;
-+
-+ platform_set_drvdata(pdev, imx6_pcie);
-+ return 0;
-+
-+err:
-+ return ret;
-+}
-+
-+static const struct of_device_id imx6_pcie_of_match[] = {
-+ { .compatible = "fsl,imx6q-pcie", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
-+
-+static struct platform_driver imx6_pcie_driver = {
-+ .driver = {
-+ .name = "imx6q-pcie",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(imx6_pcie_of_match),
-+ },
-+};
-+
-+/* Freescale PCIe driver does not allow module unload */
-+
-+static int __init imx6_pcie_init(void)
-+{
-+ return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
-+}
-+module_init(imx6_pcie_init);
-+
-+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
-+MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/imx6/patches-3.12/0030-pcie-designware-fix-io-transfers.patch b/target/linux/imx6/patches-3.12/0030-pcie-designware-fix-io-transfers.patch
deleted file mode 100644
index 1d3e83952b..0000000000
--- a/target/linux/imx6/patches-3.12/0030-pcie-designware-fix-io-transfers.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From: Pratyush Anand <pratyush.anand@st.com>
-
-pp->io_base which is the input of the outbound IO address translation
-unit should be the cpu address, it was programmed wrongly to realio
-address.
-
-We should pass global_io_offset rather than sys->io_offset to
-pci_ioremap_io, so we map the new window into the first available spot
-in the Linux view of the I/O space.
-
-We must also pass cpu address instead of realio address to
-pci_ioremap_io.
-
-This patch fixes above issue. It has been tested with Lecroy PTC in AIC
-mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
-otherwise.
-
-Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
-Tested-by: Mohit Kumar <mohit.kumar@st.com>
-Tested-by: Tim Harvey <tharvey@gateworks.com>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Cc: Marek Vasut <marex@denx.de>
-Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
-Cc: linux-pci@vger.kernel.org
-Cc: spear-devel@list.st.com
----
- drivers/pci/host/pcie-designware.c | 5 ++---
- 1 files changed, 2 insertions(+), 3 deletions(-)
-
-http://thread.gmane.org/gmane.linux.kernel.pci/27204
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
- + global_io_offset);
- pp->config.io_size = resource_size(&pp->io);
- pp->config.io_bus_addr = range.pci_addr;
-+ pp->io_base = range.cpu_addr;
- }
- if (restype == IORESOURCE_MEM) {
- of_pci_range_to_resource(&range, np, &pp->mem);
-@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
-
- pp->cfg0_base = pp->cfg.start;
- pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
-- pp->io_base = pp->io.start;
- pp->mem_base = pp->mem.start;
-
- pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
-@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
-
- if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
- sys->io_offset = global_io_offset - pp->config.io_bus_addr;
-- pci_ioremap_io(sys->io_offset, pp->io.start);
-+ pci_ioremap_io(global_io_offset, pp->io_base);
- global_io_offset += SZ_64K;
- pci_add_resource_offset(&sys->resources, &pp->io,
- sys->io_offset);
diff --git a/target/linux/imx6/patches-3.12/0031-PCI-imx6-init-must-be-early.patch b/target/linux/imx6/patches-3.12/0031-PCI-imx6-init-must-be-early.patch
deleted file mode 100644
index 0546d9c8fa..0000000000
--- a/target/linux/imx6/patches-3.12/0031-PCI-imx6-init-must-be-early.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 8c8c877d8490c9d51210ee9e90d5f4d740f115c9 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:55:47 -0700
-Subject: [PATCH 3/5] PCI: imx6: init must be early
-
-If driver init is not early the pcie port driver gets initalized
-first and interrupts are not configured for the imx6 pcie driver.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/host/pci-imx6.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -568,7 +568,7 @@ static int __init imx6_pcie_init(void)
- {
- return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
- }
--module_init(imx6_pcie_init);
-+fs_initcall(imx6_pcie_init);
-
- MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
- MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
diff --git a/target/linux/imx6/patches-3.12/0032-PCI-imx6-fix-imprecise-abort-handler.patch b/target/linux/imx6/patches-3.12/0032-PCI-imx6-fix-imprecise-abort-handler.patch
deleted file mode 100644
index 5cef4114f4..0000000000
--- a/target/linux/imx6/patches-3.12/0032-PCI-imx6-fix-imprecise-abort-handler.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 8590081d5328fe59d4f72aaadafb47fb91d8dc7c Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:52:16 -0700
-Subject: [PATCH] PCI: imx6: fix imprecise abort handler
-
-An imprecise abort is triggered when a port behind a switch is accessed
-and no device is present. At enumeration, imprecise aborts are not enabled
-thus this ends up getting deferred until the kernel has completed init. At
-that point we must not adjust PC - the handler must do nothing, but a handler
-must exist.
-
-This fixes random crashes that occur right after freeing init.
-This is against linux-pci/host-imx6.
-
-Acked-by: Marek Vasut <marex@denx.de>
-Tested-by: Marek Vasut <marex@denx.de>
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/host/pci-imx6.c | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
- static int imx6q_pcie_abort_handler(unsigned long addr,
- unsigned int fsr, struct pt_regs *regs)
- {
-- /*
-- * If it was an imprecise abort, then we need to correct the
-- * return address to be _after_ the instruction.
-- */
-- if (fsr & (1 << 10))
-- regs->ARM_pc += 4;
- return 0;
- }
-
diff --git a/target/linux/imx6/patches-3.12/0033-PCI-imx6-increase-link-startup.patch b/target/linux/imx6/patches-3.12/0033-PCI-imx6-increase-link-startup.patch
deleted file mode 100644
index a94a166908..0000000000
--- a/target/linux/imx6/patches-3.12/0033-PCI-imx6-increase-link-startup.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 11e8d0ed8cc3b415767961555efc2885791a9391 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:57:28 -0700
-Subject: [PATCH 4/5] PCI: imx6: increase link startup
-
-An increase link startup delay is required when certain PCI switches are
-attached to the root complex.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/host/pci-imx6.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct p
- while (!dw_pcie_link_up(pp)) {
- usleep_range(100, 1000);
- count++;
-- if (count >= 10) {
-+ if (count >= 200) {
- dev_err(pp->dev, "phy link never came up\n");
- dev_dbg(pp->dev,
- "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
diff --git a/target/linux/imx6/patches-3.12/0034-PCI-imx6-add-support-for-legacy-irqs.patch b/target/linux/imx6/patches-3.12/0034-PCI-imx6-add-support-for-legacy-irqs.patch
deleted file mode 100644
index 03f29f480d..0000000000
--- a/target/linux/imx6/patches-3.12/0034-PCI-imx6-add-support-for-legacy-irqs.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] PCI: imx6: add support for legacy irqs
-
-The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices
-are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the
-mapping is reversed from when they are behind a PCIe switch.
-
-This patch still needs some review and clarification before going
-upstream.
----
- drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -482,7 +482,26 @@ int dw_pcie_map_irq(const struct pci_dev
- {
- struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
-
-- return pp->irq;
-+ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */
-+ if ( dev->bus && dev->bus->self
-+ && (dev->bus->self->vendor == 0x104c)
-+ && (dev->bus->self->device == 0x8240)) {
-+ switch (pin) {
-+ case 1: return pp->irq - 3;
-+ case 2: return pp->irq - 2;
-+ case 3: return pp->irq - 1;
-+ case 4: return pp->irq;
-+ default: return -1;
-+ }
-+ } else {
-+ switch (pin) {
-+ case 1: return pp->irq;
-+ case 2: return pp->irq - 1;
-+ case 3: return pp->irq - 2;
-+ case 4: return pp->irq - 3;
-+ default: return -1;
-+ }
-+ }
- }
-
- static struct hw_pci dw_pci = {
diff --git a/target/linux/imx6/patches-3.12/0040-i2c-imx-retry-on-NAK.patch b/target/linux/imx6/patches-3.12/0040-i2c-imx-retry-on-NAK.patch
deleted file mode 100644
index 6039cf5e48..0000000000
--- a/target/linux/imx6/patches-3.12/0040-i2c-imx-retry-on-NAK.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] i2c: imx: retry on NAK
-
-In case of busy i2c try again to get ACK.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Tested-by: Luka Perkov <luka@openwrt.org>
----
- drivers/i2c/busses/i2c-imx.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-imx.c
-+++ b/drivers/i2c/busses/i2c-imx.c
-@@ -62,6 +62,7 @@
-
- /* Default value */
- #define IMX_I2C_BIT_RATE 100000 /* 100kHz */
-+#define IMX_I2C_MAX_RETRIES 3 /* number of retries to attempt */
-
- /* IMX I2C registers:
- * the I2C register offset is different between SoCs,
-@@ -298,7 +299,7 @@ static int i2c_imx_acked(struct imx_i2c_
- {
- if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
- dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
-- return -EIO; /* No ACK */
-+ return -EAGAIN; /* try again */
- }
-
- dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
-@@ -633,6 +634,7 @@ static int i2c_imx_probe(struct platform
- i2c_imx->adapter.dev.parent = &pdev->dev;
- i2c_imx->adapter.nr = pdev->id;
- i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
-+ i2c_imx->adapter.retries = IMX_I2C_MAX_RETRIES;
- i2c_imx->base = base;
-
- /* Get I2C clock */
diff --git a/target/linux/imx6/patches-3.12/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.12/0050-sky2-allow-mac-to-come-from-dt.patch
deleted file mode 100644
index 54743a5d99..0000000000
--- a/target/linux/imx6/patches-3.12/0050-sky2-allow-mac-to-come-from-dt.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] sky2: allow mac to come from dt
-
-The driver reads the mac address from the device registers which would
-need to have been programmed by the bootloader. This patch adds
-the ability to pull the mac from devicetree via the aliases/sky2 node.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -44,6 +44,8 @@
- #include <linux/prefetch.h>
- #include <linux/debugfs.h>
- #include <linux/mii.h>
-+#include <linux/of_device.h>
-+#include <linux/of_net.h>
-
- #include <asm/irq.h>
-
-@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd
- {
- struct sky2_port *sky2;
- struct net_device *dev = alloc_etherdev(sizeof(*sky2));
-+ unsigned char *iap, tmpaddr[ETH_ALEN];
-
- if (!dev)
- return NULL;
-@@ -4802,8 +4805,36 @@ static struct net_device *sky2_init_netd
-
- dev->features |= dev->hw_features;
-
-+ /*
-+ * try to get mac address in the following order:
-+ * 1) from device tree data
-+ * 2) from internal registers set by bootloader
-+ */
-+ iap = NULL;
-+ if (IS_ENABLED(CONFIG_OF)) {
-+ struct device_node *np;
-+ np = of_find_node_by_path("/aliases");
-+ if (np) {
-+ const char *path = of_get_property(np, "sky2", NULL);
-+ if (path)
-+ np = of_find_node_by_path(path);
-+ if (np)
-+ path = of_get_mac_address(np);
-+ if (path)
-+ iap = (unsigned char *) path;
-+ }
-+ }
-+
-+ /*
-+ * 2) mac registers set by bootloader
-+ */
-+ if (!iap || !is_valid_ether_addr(iap)) {
-+ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ iap = &tmpaddr[0];
-+ }
-+
- /* read the mac address */
-- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- return dev;
- }
diff --git a/target/linux/imx6/patches-3.12/100-bootargs.patch b/target/linux/imx6/patches-3.12/100-bootargs.patch
deleted file mode 100644
index 0954391203..0000000000
--- a/target/linux/imx6/patches-3.12/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -19,4 +19,8 @@
- memory {
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };