aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi2
-rw-r--r--target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi2
-rw-r--r--target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi2
-rw-r--r--target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi2
-rw-r--r--target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch32
-rw-r--r--target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch68
-rw-r--r--target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch41
-rw-r--r--target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch84
-rw-r--r--target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch124
-rw-r--r--target/linux/lantiq/patches-5.4/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch32
-rw-r--r--target/linux/lantiq/patches-5.4/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch68
-rw-r--r--target/linux/lantiq/patches-5.4/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch41
-rw-r--r--target/linux/lantiq/patches-5.4/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch84
-rw-r--r--target/linux/lantiq/patches-5.4/0710-net-lantiq-configure-burst-length-for-ethernet.patch124
14 files changed, 706 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi
index c477473a06..5c608dab63 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi
@@ -236,6 +236,8 @@
interrupts = <105 109>;
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
+ lantiq,tx-burst-length = <4>;
+ lantiq,rx-burst-length = <4>;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi
index 819dcfb5a8..61283f5621 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi
@@ -387,6 +387,8 @@
interrupts = <73 72>;
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
+ lantiq,tx-burst-length = <8>;
+ lantiq,rx-burst-length = <8>;
};
ppe@e234000 {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi
index e531fe45e8..a18183a2de 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -299,6 +299,8 @@
reg = <0xe180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
+ lantiq,tx-burst-length = <4>;
+ lantiq,rx-burst-length = <4>;
};
ppe@e234000 {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi
index 27858be28f..e379b07b53 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi
@@ -488,6 +488,8 @@
interrupt-names = "tx", "rx";
resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>;
reset-names = "switch", "ppe", "ppe_dsp";
+ lantiq,tx-burst-length = <8>;
+ lantiq,rx-burst-length = <8>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch b/target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch
new file mode 100644
index 0000000000..05227c8f89
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch
@@ -0,0 +1,32 @@
+From 497acc03cd3918baabe25d46e30c5c62b998e24d Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Sat, 19 Jun 2021 13:38:12 +0200
+Subject: [PATCH 1/5] MIPS: lantiq: dma: add small delay after reset
+
+Reading the DMA registers immediately after the reset causes
+Data Bus Error. Adding a small delay fixes this problem.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ arch/mips/lantiq/xway/dma.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -11,6 +11,7 @@
+ #include <linux/export.h>
+ #include <linux/spinlock.h>
+ #include <linux/clk.h>
++#include <linux/delay.h>
+ #include <linux/err.h>
+
+ #include <lantiq_soc.h>
+@@ -221,6 +222,8 @@ ltq_dma_init(struct platform_device *pde
+ clk_enable(clk);
+ ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+
++ usleep_range(1, 10);
++
+ /* disable all interrupts */
+ ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
diff --git a/target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch b/target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch
new file mode 100644
index 0000000000..5d1862d576
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch
@@ -0,0 +1,68 @@
+From d31260c2f6a5cdddb052ab7cb09560eb23ce6597 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Thu, 15 Apr 2021 21:28:24 +0200
+Subject: [PATCH 2/5] MIPS: lantiq: dma: reset correct number of channel
+
+Different SoCs have a different number of channels, e.g .:
+* amazon-se has 10 channels,
+* danube+ar9 have 20 channels,
+* vr9 has 28 channels,
+* ar10 has 24 channels.
+
+We can read the ID register and, depending on the reported
+number of channels, reset the appropriate number of channels.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ arch/mips/lantiq/xway/dma.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -30,6 +30,7 @@
+ #define LTQ_DMA_PCTRL 0x44
+ #define LTQ_DMA_IRNEN 0xf4
+
++#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
+ #define DMA_DESCPT BIT(3) /* descriptor complete irq */
+ #define DMA_TX BIT(8) /* TX channel direction */
+ #define DMA_CHAN_ON BIT(0) /* channel on / off bit */
+@@ -40,7 +41,6 @@
+ #define DMA_POLL BIT(31) /* turn on channel polling */
+ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
+ #define DMA_2W_BURST BIT(1) /* 2 word burst length */
+-#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
+ #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
+ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
+
+@@ -206,7 +206,7 @@ ltq_dma_init(struct platform_device *pde
+ {
+ struct clk *clk;
+ struct resource *res;
+- unsigned id;
++ unsigned int id, nchannels;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -228,17 +228,18 @@ ltq_dma_init(struct platform_device *pde
+ ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
+ /* reset/configure each channel */
+- for (i = 0; i < DMA_MAX_CHANNEL; i++) {
++ id = ltq_dma_r32(LTQ_DMA_ID);
++ nchannels = ((id & DMA_ID_CHNR) >> 20);
++ for (i = 0; i < nchannels; i++) {
+ ltq_dma_w32(i, LTQ_DMA_CS);
+ ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
+ ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
+ ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+ }
+
+- id = ltq_dma_r32(LTQ_DMA_ID);
+ dev_info(&pdev->dev,
+ "Init done - hw rev: %X, ports: %d, channels: %d\n",
+- id & 0x1f, (id >> 16) & 0xf, id >> 20);
++ id & 0x1f, (id >> 16) & 0xf, nchannels);
+
+ return 0;
+ }
diff --git a/target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch b/target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch
new file mode 100644
index 0000000000..67423d2e97
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch
@@ -0,0 +1,41 @@
+From 7d9ea9052d6680d2910b8b005c397d95b3a8b012 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Wed, 7 Apr 2021 21:04:39 +0200
+Subject: [PATCH 3/5] MIPS: lantiq: dma: fix burst length for DEU
+
+The current definition of 2W burst length is invalid.
+This patch fixes it. Current downstream DEU driver doesn't
+use DMA. An incorrect burst length value doesn't cause any
+errors. This patch also adds other burst length values.
+
+Fixes: dfec1a827d2b ("MIPS: Lantiq: Add DMA support")
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ arch/mips/lantiq/xway/dma.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -40,7 +40,11 @@
+ #define DMA_IRQ_ACK 0x7e /* IRQ status register */
+ #define DMA_POLL BIT(31) /* turn on channel polling */
+ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
+-#define DMA_2W_BURST BIT(1) /* 2 word burst length */
++#define DMA_PCTRL_2W_BURST 0x1 /* 2 word burst length */
++#define DMA_PCTRL_4W_BURST 0x2 /* 4 word burst length */
++#define DMA_PCTRL_8W_BURST 0x3 /* 8 word burst length */
++#define DMA_TX_BURST_SHIFT 4 /* tx burst shift */
++#define DMA_RX_BURST_SHIFT 2 /* rx burst shift */
+ #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
+ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
+
+@@ -191,7 +195,8 @@ ltq_dma_init_port(int p)
+ break;
+
+ case DMA_PORT_DEU:
+- ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
++ ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
++ (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
+ LTQ_DMA_PCTRL);
+ break;
+
diff --git a/target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch b/target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch
new file mode 100644
index 0000000000..fab2440453
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch
@@ -0,0 +1,84 @@
+From 6615eeb39f7a110a196f20acbfb3a017da4d75d2 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Fri, 14 May 2021 21:25:08 +0200
+Subject: [PATCH 4/5] MIPS: lantiq: dma: make a burst length configurable in
+ drivers
+
+Make a burst length configurable in drivers.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ .../include/asm/mach-lantiq/xway/xway_dma.h | 2 +-
+ arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++---
+ 2 files changed, 34 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
+@@ -45,6 +45,6 @@ extern void ltq_dma_close(struct ltq_dma
+ extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch);
+ extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch);
+ extern void ltq_dma_free(struct ltq_dma_channel *ch);
+-extern void ltq_dma_init_port(int p);
++extern void ltq_dma_init_port(int p, int tx_burst, int rx_burst);
+
+ #endif
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -181,7 +181,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
+ EXPORT_SYMBOL_GPL(ltq_dma_free);
+
+ void
+-ltq_dma_init_port(int p)
++ltq_dma_init_port(int p, int tx_burst, int rx_burst)
+ {
+ ltq_dma_w32(p, LTQ_DMA_PS);
+ switch (p) {
+@@ -190,16 +190,44 @@ ltq_dma_init_port(int p)
+ * Tell the DMA engine to swap the endianness of data frames and
+ * drop packets if the channel arbitration fails.
+ */
+- ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
++ ltq_dma_w32_mask(0, (DMA_ETOP_ENDIANNESS | DMA_PDEN),
+ LTQ_DMA_PCTRL);
+ break;
+
+- case DMA_PORT_DEU:
+- ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
+- (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
++ default:
++ break;
++ }
++
++ switch (rx_burst) {
++ case 8:
++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_8W_BURST << DMA_RX_BURST_SHIFT),
+ LTQ_DMA_PCTRL);
+ break;
++ case 4:
++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_4W_BURST << DMA_RX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ case 2:
++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ default:
++ break;
++ }
+
++ switch (tx_burst) {
++ case 8:
++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_8W_BURST << DMA_TX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ case 4:
++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_4W_BURST << DMA_TX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ case 2:
++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
+ default:
+ break;
+ }
diff --git a/target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch b/target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch
new file mode 100644
index 0000000000..0a2996813a
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch
@@ -0,0 +1,124 @@
+From ec1a17a11aced3cd756e59d91ad6f50b7a2fabfb Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Sun, 16 May 2021 15:52:06 +0200
+Subject: [PATCH 5/5] net: lantiq: configure burst length for ethernet
+
+Configure the burst length for Ethernet. This improves Ethernet
+performance by 58%. According to the vendor BSP, 8W burst length
+is supported by ar9 and newer SoCs.
+
+The NAT benchmark results on xRX200 (Down/Up):
+* 2W: 330 Mb/s
+* 4W: 432 Mb/s 372 Mb/s
+* 8W: 520 Mb/s 389 Mb/s
+
+Tested on xRX200 and xRX330.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ drivers/net/ethernet/lantiq_etop.c | 21 ++++++++++++++++++---
+ drivers/net/ethernet/lantiq_xrx200.c | 21 ++++++++++++++++++---
+ 2 files changed, 36 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -148,6 +148,9 @@ struct ltq_etop_priv {
+ struct ltq_etop_chan txch;
+ struct ltq_etop_chan rxch;
+
++ int tx_burst_len;
++ int rx_burst_len;
++
+ int tx_irq;
+ int rx_irq;
+
+@@ -399,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev
+ int rx = priv->rx_irq - LTQ_DMA_ETOP;
+ int err;
+
+- ltq_dma_init_port(DMA_PORT_ETOP);
++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len);
+
+ priv->txch.dma.nr = tx;
+ priv->txch.dma.dev = &priv->pdev->dev;
+@@ -676,8 +679,8 @@ ltq_etop_tx(struct sk_buff *skb, struct
+ return NETDEV_TX_BUSY;
+ }
+
+- /* dma needs to start on a 16 byte aligned address */
+- byte_offset = CPHYSADDR(skb->data) % 16;
++ /* dma needs to start on a burst length value aligned address */
++ byte_offset = CPHYSADDR(skb->data) % (priv->tx_burst_len * 4);
+ priv->txch.skb[priv->txch.dma.desc] = skb;
+
+ netif_trans_update(dev);
+@@ -925,6 +928,18 @@ static int ltq_etop_probe(struct platfor
+ spin_lock_init(&priv->lock);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
++ err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
++ if (err < 0) {
++ dev_err(&pdev->dev, "unable to read tx-burst-length property\n");
++ return err;
++ }
++
++ err = device_property_read_u32(&pdev->dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
++ if (err < 0) {
++ dev_err(&pdev->dev, "unable to read rx-burst-length property\n");
++ return err;
++ }
++
+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
+ priv->txch.netdev = dev;
+--- a/drivers/net/ethernet/lantiq_xrx200.c
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -71,6 +71,9 @@ struct xrx200_priv {
+ struct net_device *net_dev;
+ struct device *dev;
+
++ int tx_burst_len;
++ int rx_burst_len;
++
+ __iomem void *pmac_reg;
+ };
+
+@@ -316,8 +319,8 @@ static netdev_tx_t xrx200_start_xmit(str
+ if (unlikely(dma_mapping_error(priv->dev, mapping)))
+ goto err_drop;
+
+- /* dma needs to start on a 16 byte aligned address */
+- byte_offset = mapping % 16;
++ /* dma needs to start on a burst length value aligned address */
++ byte_offset = mapping % (priv->tx_burst_len * 4);
+
+ desc->addr = mapping - byte_offset;
+ /* Make sure the address is written before we give it to HW */
+@@ -369,7 +372,7 @@ static int xrx200_dma_init(struct xrx200
+ int ret = 0;
+ int i;
+
+- ltq_dma_init_port(DMA_PORT_ETOP);
++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len);
+
+ ch_rx->dma.nr = XRX200_DMA_RX;
+ ch_rx->dma.dev = priv->dev;
+@@ -487,6 +490,18 @@ static int xrx200_probe(struct platform_
+ if (err)
+ eth_hw_addr_random(net_dev);
+
++ err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
++ if (err < 0) {
++ dev_err(dev, "unable to read tx-burst-length property\n");
++ return err;
++ }
++
++ err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
++ if (err < 0) {
++ dev_err(dev, "unable to read rx-burst-length property\n");
++ return err;
++ }
++
+ /* bring up the dma engine and IP core */
+ err = xrx200_dma_init(priv);
+ if (err)
diff --git a/target/linux/lantiq/patches-5.4/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch b/target/linux/lantiq/patches-5.4/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch
new file mode 100644
index 0000000000..05227c8f89
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch
@@ -0,0 +1,32 @@
+From 497acc03cd3918baabe25d46e30c5c62b998e24d Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Sat, 19 Jun 2021 13:38:12 +0200
+Subject: [PATCH 1/5] MIPS: lantiq: dma: add small delay after reset
+
+Reading the DMA registers immediately after the reset causes
+Data Bus Error. Adding a small delay fixes this problem.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ arch/mips/lantiq/xway/dma.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -11,6 +11,7 @@
+ #include <linux/export.h>
+ #include <linux/spinlock.h>
+ #include <linux/clk.h>
++#include <linux/delay.h>
+ #include <linux/err.h>
+
+ #include <lantiq_soc.h>
+@@ -221,6 +222,8 @@ ltq_dma_init(struct platform_device *pde
+ clk_enable(clk);
+ ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+
++ usleep_range(1, 10);
++
+ /* disable all interrupts */
+ ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
diff --git a/target/linux/lantiq/patches-5.4/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch b/target/linux/lantiq/patches-5.4/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch
new file mode 100644
index 0000000000..5d1862d576
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch
@@ -0,0 +1,68 @@
+From d31260c2f6a5cdddb052ab7cb09560eb23ce6597 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Thu, 15 Apr 2021 21:28:24 +0200
+Subject: [PATCH 2/5] MIPS: lantiq: dma: reset correct number of channel
+
+Different SoCs have a different number of channels, e.g .:
+* amazon-se has 10 channels,
+* danube+ar9 have 20 channels,
+* vr9 has 28 channels,
+* ar10 has 24 channels.
+
+We can read the ID register and, depending on the reported
+number of channels, reset the appropriate number of channels.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ arch/mips/lantiq/xway/dma.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -30,6 +30,7 @@
+ #define LTQ_DMA_PCTRL 0x44
+ #define LTQ_DMA_IRNEN 0xf4
+
++#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
+ #define DMA_DESCPT BIT(3) /* descriptor complete irq */
+ #define DMA_TX BIT(8) /* TX channel direction */
+ #define DMA_CHAN_ON BIT(0) /* channel on / off bit */
+@@ -40,7 +41,6 @@
+ #define DMA_POLL BIT(31) /* turn on channel polling */
+ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
+ #define DMA_2W_BURST BIT(1) /* 2 word burst length */
+-#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
+ #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
+ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
+
+@@ -206,7 +206,7 @@ ltq_dma_init(struct platform_device *pde
+ {
+ struct clk *clk;
+ struct resource *res;
+- unsigned id;
++ unsigned int id, nchannels;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -228,17 +228,18 @@ ltq_dma_init(struct platform_device *pde
+ ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
+ /* reset/configure each channel */
+- for (i = 0; i < DMA_MAX_CHANNEL; i++) {
++ id = ltq_dma_r32(LTQ_DMA_ID);
++ nchannels = ((id & DMA_ID_CHNR) >> 20);
++ for (i = 0; i < nchannels; i++) {
+ ltq_dma_w32(i, LTQ_DMA_CS);
+ ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
+ ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
+ ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+ }
+
+- id = ltq_dma_r32(LTQ_DMA_ID);
+ dev_info(&pdev->dev,
+ "Init done - hw rev: %X, ports: %d, channels: %d\n",
+- id & 0x1f, (id >> 16) & 0xf, id >> 20);
++ id & 0x1f, (id >> 16) & 0xf, nchannels);
+
+ return 0;
+ }
diff --git a/target/linux/lantiq/patches-5.4/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch b/target/linux/lantiq/patches-5.4/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch
new file mode 100644
index 0000000000..67423d2e97
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch
@@ -0,0 +1,41 @@
+From 7d9ea9052d6680d2910b8b005c397d95b3a8b012 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Wed, 7 Apr 2021 21:04:39 +0200
+Subject: [PATCH 3/5] MIPS: lantiq: dma: fix burst length for DEU
+
+The current definition of 2W burst length is invalid.
+This patch fixes it. Current downstream DEU driver doesn't
+use DMA. An incorrect burst length value doesn't cause any
+errors. This patch also adds other burst length values.
+
+Fixes: dfec1a827d2b ("MIPS: Lantiq: Add DMA support")
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ arch/mips/lantiq/xway/dma.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -40,7 +40,11 @@
+ #define DMA_IRQ_ACK 0x7e /* IRQ status register */
+ #define DMA_POLL BIT(31) /* turn on channel polling */
+ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
+-#define DMA_2W_BURST BIT(1) /* 2 word burst length */
++#define DMA_PCTRL_2W_BURST 0x1 /* 2 word burst length */
++#define DMA_PCTRL_4W_BURST 0x2 /* 4 word burst length */
++#define DMA_PCTRL_8W_BURST 0x3 /* 8 word burst length */
++#define DMA_TX_BURST_SHIFT 4 /* tx burst shift */
++#define DMA_RX_BURST_SHIFT 2 /* rx burst shift */
+ #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
+ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
+
+@@ -191,7 +195,8 @@ ltq_dma_init_port(int p)
+ break;
+
+ case DMA_PORT_DEU:
+- ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
++ ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
++ (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
+ LTQ_DMA_PCTRL);
+ break;
+
diff --git a/target/linux/lantiq/patches-5.4/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch b/target/linux/lantiq/patches-5.4/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch
new file mode 100644
index 0000000000..fab2440453
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch
@@ -0,0 +1,84 @@
+From 6615eeb39f7a110a196f20acbfb3a017da4d75d2 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Fri, 14 May 2021 21:25:08 +0200
+Subject: [PATCH 4/5] MIPS: lantiq: dma: make a burst length configurable in
+ drivers
+
+Make a burst length configurable in drivers.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ .../include/asm/mach-lantiq/xway/xway_dma.h | 2 +-
+ arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++---
+ 2 files changed, 34 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
+@@ -45,6 +45,6 @@ extern void ltq_dma_close(struct ltq_dma
+ extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch);
+ extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch);
+ extern void ltq_dma_free(struct ltq_dma_channel *ch);
+-extern void ltq_dma_init_port(int p);
++extern void ltq_dma_init_port(int p, int tx_burst, int rx_burst);
+
+ #endif
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -181,7 +181,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
+ EXPORT_SYMBOL_GPL(ltq_dma_free);
+
+ void
+-ltq_dma_init_port(int p)
++ltq_dma_init_port(int p, int tx_burst, int rx_burst)
+ {
+ ltq_dma_w32(p, LTQ_DMA_PS);
+ switch (p) {
+@@ -190,16 +190,44 @@ ltq_dma_init_port(int p)
+ * Tell the DMA engine to swap the endianness of data frames and
+ * drop packets if the channel arbitration fails.
+ */
+- ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
++ ltq_dma_w32_mask(0, (DMA_ETOP_ENDIANNESS | DMA_PDEN),
+ LTQ_DMA_PCTRL);
+ break;
+
+- case DMA_PORT_DEU:
+- ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
+- (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
++ default:
++ break;
++ }
++
++ switch (rx_burst) {
++ case 8:
++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_8W_BURST << DMA_RX_BURST_SHIFT),
+ LTQ_DMA_PCTRL);
+ break;
++ case 4:
++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_4W_BURST << DMA_RX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ case 2:
++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ default:
++ break;
++ }
+
++ switch (tx_burst) {
++ case 8:
++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_8W_BURST << DMA_TX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ case 4:
++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_4W_BURST << DMA_TX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
++ case 2:
++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT),
++ LTQ_DMA_PCTRL);
++ break;
+ default:
+ break;
+ }
diff --git a/target/linux/lantiq/patches-5.4/0710-net-lantiq-configure-burst-length-for-ethernet.patch b/target/linux/lantiq/patches-5.4/0710-net-lantiq-configure-burst-length-for-ethernet.patch
new file mode 100644
index 0000000000..746a09c453
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0710-net-lantiq-configure-burst-length-for-ethernet.patch
@@ -0,0 +1,124 @@
+From ec1a17a11aced3cd756e59d91ad6f50b7a2fabfb Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Sun, 16 May 2021 15:52:06 +0200
+Subject: [PATCH 5/5] net: lantiq: configure burst length for ethernet
+
+Configure the burst length for Ethernet. This improves Ethernet
+performance by 58%. According to the vendor BSP, 8W burst length
+is supported by ar9 and newer SoCs.
+
+The NAT benchmark results on xRX200 (Down/Up):
+* 2W: 330 Mb/s
+* 4W: 432 Mb/s 372 Mb/s
+* 8W: 520 Mb/s 389 Mb/s
+
+Tested on xRX200 and xRX330.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+---
+ drivers/net/ethernet/lantiq_etop.c | 21 ++++++++++++++++++---
+ drivers/net/ethernet/lantiq_xrx200.c | 21 ++++++++++++++++++---
+ 2 files changed, 36 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -148,6 +148,9 @@ struct ltq_etop_priv {
+ struct ltq_etop_chan txch;
+ struct ltq_etop_chan rxch;
+
++ int tx_burst_len;
++ int rx_burst_len;
++
+ int tx_irq;
+ int rx_irq;
+
+@@ -399,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev
+ int rx = priv->rx_irq - LTQ_DMA_ETOP;
+ int err;
+
+- ltq_dma_init_port(DMA_PORT_ETOP);
++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len);
+
+ priv->txch.dma.nr = tx;
+ priv->txch.dma.dev = &priv->pdev->dev;
+@@ -676,8 +679,8 @@ ltq_etop_tx(struct sk_buff *skb, struct
+ return NETDEV_TX_BUSY;
+ }
+
+- /* dma needs to start on a 16 byte aligned address */
+- byte_offset = CPHYSADDR(skb->data) % 16;
++ /* dma needs to start on a burst length value aligned address */
++ byte_offset = CPHYSADDR(skb->data) % (priv->tx_burst_len * 4);
+ priv->txch.skb[priv->txch.dma.desc] = skb;
+
+ netif_trans_update(dev);
+@@ -930,6 +933,18 @@ static int ltq_etop_probe(struct platfor
+ spin_lock_init(&priv->lock);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
++ err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
++ if (err < 0) {
++ dev_err(&pdev->dev, "unable to read tx-burst-length property\n");
++ return err;
++ }
++
++ err = device_property_read_u32(&pdev->dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
++ if (err < 0) {
++ dev_err(&pdev->dev, "unable to read rx-burst-length property\n");
++ return err;
++ }
++
+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
+ priv->txch.netdev = dev;
+--- a/drivers/net/ethernet/lantiq_xrx200.c
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -71,6 +71,9 @@ struct xrx200_priv {
+ struct net_device *net_dev;
+ struct device *dev;
+
++ int tx_burst_len;
++ int rx_burst_len;
++
+ __iomem void *pmac_reg;
+ };
+
+@@ -315,8 +318,8 @@ static int xrx200_start_xmit(struct sk_b
+ if (unlikely(dma_mapping_error(priv->dev, mapping)))
+ goto err_drop;
+
+- /* dma needs to start on a 16 byte aligned address */
+- byte_offset = mapping % 16;
++ /* dma needs to start on a burst length value aligned address */
++ byte_offset = mapping % (priv->tx_burst_len * 4);
+
+ desc->addr = mapping - byte_offset;
+ /* Make sure the address is written before we give it to HW */
+@@ -368,7 +371,7 @@ static int xrx200_dma_init(struct xrx200
+ int ret = 0;
+ int i;
+
+- ltq_dma_init_port(DMA_PORT_ETOP);
++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len);
+
+ ch_rx->dma.nr = XRX200_DMA_RX;
+ ch_rx->dma.dev = priv->dev;
+@@ -486,6 +489,18 @@ static int xrx200_probe(struct platform_
+ if (err)
+ eth_hw_addr_random(net_dev);
+
++ err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
++ if (err < 0) {
++ dev_err(dev, "unable to read tx-burst-length property\n");
++ return err;
++ }
++
++ err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
++ if (err < 0) {
++ dev_err(dev, "unable to read rx-burst-length property\n");
++ return err;
++ }
++
+ /* bring up the dma engine and IP core */
+ err = xrx200_dma_init(priv);
+ if (err)