diff options
Diffstat (limited to 'target/linux')
5 files changed, 450 insertions, 0 deletions
diff --git a/target/linux/mediatek/dts/mt7622-dlink-eagle-pro-ai-m32-a1.dts b/target/linux/mediatek/dts/mt7622-dlink-eagle-pro-ai-m32-a1.dts new file mode 100644 index 00000000000..ca680e4c29f --- /dev/null +++ b/target/linux/mediatek/dts/mt7622-dlink-eagle-pro-ai-m32-a1.dts @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7622.dtsi" +#include "mt6380.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "D-Link EAGLE PRO AI M32 A1"; + compatible = "dlink,eagle-pro-ai-m32-a1", "mediatek,mt7622"; + + aliases { + led-boot = &status_orange; + led-failsafe = &status_red; + led-running = &status_white; + led-upgrade = &status_red; + serial0 = &uart0; + label-mac-device = &gmac0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu@1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + + wps { + gpios = <&pio 102 GPIO_ACTIVE_LOW>; + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_white: status_white { + label = "white:status"; + gpios = <&pio 85 GPIO_ACTIVE_LOW>; + }; + + status_orange: status_orange { + label = "orange:status"; + gpios = <&pio 20 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + status_red: status_red { + label = "red:status"; + gpios = <&pio 17 GPIO_ACTIVE_LOW>; + }; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; +}; + +&bch { + status = "okay"; +}; + +&btif { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + nvmem-cells = <&macaddr_odm_83>; + nvmem-cell-names = "mac-address"; + phy-mode = "2500base-x"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <2500>; + }; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&pio 54 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + wan: port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; +}; + +&pio { + epa_elna_pins: epa-elna-pins { + mux { + function = "antsel"; + groups = "antsel0", "antsel1", "antsel2", "antsel3", + "antsel4", "antsel5", "antsel6", "antsel7", + "antsel8", "antsel9", "antsel12", "antsel13", + "antsel14", "antsel15", "antsel16", "antsel17"; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx"; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + status = "okay"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + status = "disabled"; +}; + +&sata_phy { + status = "disabled"; +}; + +&slot0 { + wmac1: mt7915@0,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&factory 0x05000>; + }; +}; + +&snfi { + pinctrl-names = "default"; + pinctrl-0 = <&serial_nand_pins>; + status = "okay"; + + snand: flash@0 { + compatible = "spi-nand"; + mediatek,bmt-table-size = <0x1000>; + mediatek,bmt-v2; + nand-ecc-engine = <&snfi>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Preloader"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "ATF"; + reg = <0x00080000 0x00040000>; + read-only; + }; + + partition@C0000 { + label = "Bootloader"; + reg = <0x000C0000 0x00080000>; + read-only; + }; + + partition@140000 { + label = "BootConfig"; + reg = <0x00140000 0x00040000>; + read-only; + }; + + odm: partition@180000 { + compatible = "nvmem-cells"; + label = "Odm"; + reg = <0x00180000 0x00040000>; + read-only; + + macaddr_odm_83: macaddr@83 { + reg = <0x83 0x6>; + }; + }; + + config1: partition@1C0000 { + compatible = "nvmem-cells"; + label = "Config1"; + reg = <0x001C0000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + + partition@240000 { + label = "Config2"; + reg = <0x00240000 0x00080000>; + read-only; + }; + + partition@2C0000 { + label = "Kernel1"; + reg = <0x002C0000 0x02D00000>; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00800000>; + }; + + partition@800000 { + label = "ubi"; + reg = <0x00800000 0x02500000>; + }; + }; + + partition@2FC0000 { + label = "Kernel2"; + reg = <0x02FC0000 0x02D00000>; + read-only; + }; + + factory: partition@5CC0000 { + label = "Factory"; + reg = <0x05CC0000 0x00100000>; + read-only; + }; + + partition@5DC0000 { + label = "Mydlink"; + reg = <0x05DC0000 0x00200000>; + read-only; + }; + + partition@5FC0000 { + label = "Storage"; + reg = <0x05FC0000 0x00300000>; + read-only; + }; + }; + }; +}; + +&ssusb { + status = "disabled"; +}; + +&u3phy { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&epa_elna_pins>; + mediatek,mtd-eeprom = <&factory 0x0000>; + status = "okay"; +}; + diff --git a/target/linux/mediatek/image/mt7622.mk b/target/linux/mediatek/image/mt7622.mk index 65db1ebe2e3..85776ef6d95 100644 --- a/target/linux/mediatek/image/mt7622.mk +++ b/target/linux/mediatek/image/mt7622.mk @@ -37,6 +37,25 @@ define Build/bl31-uboot cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@ endef +# Append header to a D-Link M32 Kernel 1 partition +define Build/m32-recovery-header-kernel1 + echo -en "DLK6E6010001\x00\x00\xCF\x33" > "$@.header" + echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x8D\x57\x30\x0B" >> "$@.header" +# Byte 0-3: Erase Start 0x002C0000 +# Byte 4-7: Erase Length 0x02D00000 +# Byte 8-11: Data offset: 0x002C0000 +# Byte 12-15: Data Length: 0x02D00000 + echo -en "\x00\x00\x2C\x00\x00\x00\xD0\x02\x00\x00\x2C\x00\x00\x00\xD0\x02" >> "$@.header" +# Only zeros + echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header" +# Note: The last 2 bytes of the following line are the checksum of the header +# If any data in the header will be changed, the checksum must be re-calculated + echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E\x68\x61" >> "$@.header" + cat "$@.header" "$@" > "$@.new" + mv "$@.new" "$@" + rm "$@.header" +endef + define Build/mt7622-gpt cp $@ $@.tmp 2>/dev/null || true ptgen -g -o $@.tmp -a 1 -l 1024 \ @@ -147,6 +166,25 @@ define Device/buffalo_wsr-3200ax4s endef TARGET_DEVICES += buffalo_wsr-3200ax4s +define Device/dlink_eagle-pro-ai-m32-a1 + IMAGE_SIZE := 46080k + DEVICE_VENDOR := D-Link + DEVICE_MODEL := EAGLE PRO AI M32 + DEVICE_VARIANT := A1 + DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915-firmware + KERNEL_SIZE := 8192k + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + IMAGES += tftp.bin recovery.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/tftp.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size + IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-recovery-header-kernel1 +endef +TARGET_DEVICES += dlink_eagle-pro-ai-m32-a1 + define Device/elecom_wrc-2533gent DEVICE_VENDOR := Elecom DEVICE_MODEL := WRC-2533GENT diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network index d1341099bc8..75c5e37be14 100644 --- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network @@ -24,6 +24,9 @@ mediatek_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + dlink,eagle-pro-ai-m32-a1) + ucidef_set_interfaces_lan_wan "lan1 lan2" wan + ;; ubnt,unifi-6-lr*) ucidef_set_interface_lan "eth0" ;; @@ -61,6 +64,10 @@ mediatek_setup_macs() wan_mac=$lan_mac label_mac=$lan_mac ;; + dlink,eagle-pro-ai-m32-a1) + wan_mac=$(get_mac_label) + lan_mac=$(macaddr_add $(get_mac_label) 1) + ;; reyee,ax3200-e5|\ ruijie,rg-ew3200gx-pro) lan_mac=$(macaddr_add $(get_mac_label) 1) diff --git a/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 7ee9f24071c..e9cc5922375 100644 --- a/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -18,6 +18,10 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $basemac 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $basemac 8 > /sys${DEVPATH}/macaddress ;; + dlink,eagle-pro-ai-m32-a1) + [ "$PHYNBR" = "0" ] && macaddr_add $(cat /sys/class/net/eth0/address) 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $(cat /sys/class/net/eth0/address) 3 > /sys${DEVPATH}/macaddress + ;; reyee,ax3200-e5|\ ruijie,rg-ew3200gx-pro) [ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh index ea3176d2d1e..e256d2b5332 100755 --- a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh @@ -34,6 +34,7 @@ platform_do_upgrade() { nand_do_upgrade "$1" fi ;; + dlink,eagle-pro-ai-m32-a1|\ elecom,wrc-x3200gst3|\ mediatek,mt7622-rfb1-ubi|\ netgear,wax206|\ @@ -72,6 +73,7 @@ platform_check_image() { buffalo,wsr-3200ax4s) buffalo_check_image "$board" "$magic" "$1" || return 1 ;; + dlink,eagle-pro-ai-m32-a1|\ elecom,wrc-x3200gst3|\ mediatek,mt7622-rfb1-ubi|\ netgear,wax206|\ |