aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/apm821xx/Makefile1
-rw-r--r--target/linux/apm821xx/config-5.10286
-rw-r--r--target/linux/apm821xx/dts/apm82181.dtsi13
-rw-r--r--target/linux/apm821xx/dts/meraki-mr24.dts2
-rw-r--r--target/linux/apm821xx/dts/meraki-mx60.dts2
-rw-r--r--target/linux/apm821xx/dts/netgear-wndap6x0.dtsi2
-rw-r--r--target/linux/apm821xx/dts/netgear-wndr4700.dts5
-rw-r--r--target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch30
-rw-r--r--target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch51
-rw-r--r--target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch14
-rw-r--r--target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch53
-rw-r--r--target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch65
-rw-r--r--target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch174
-rw-r--r--target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch29
14 files changed, 725 insertions, 2 deletions
diff --git a/target/linux/apm821xx/Makefile b/target/linux/apm821xx/Makefile
index b2e8d8fd1c..9c7f276dc0 100644
--- a/target/linux/apm821xx/Makefile
+++ b/target/linux/apm821xx/Makefile
@@ -10,6 +10,7 @@ FEATURES:=fpu dt gpio ramdisk squashfs usb
SUBTARGETS:=nand sata
KERNEL_PATCHVER:=5.4
+KERNEL_TESTING_PATCHVER:=5.10
define Target/Description
Build images for AppliedMicro APM821xx based boards.
diff --git a/target/linux/apm821xx/config-5.10 b/target/linux/apm821xx/config-5.10
new file mode 100644
index 0000000000..c9c720de29
--- /dev/null
+++ b/target/linux/apm821xx/config-5.10
@@ -0,0 +1,286 @@
+# CONFIG_40x is not set
+CONFIG_44x=y
+CONFIG_460EX=y
+CONFIG_4xx=y
+CONFIG_4xx_SOC=y
+# CONFIG_ADVANCED_OPTIONS is not set
+CONFIG_APM821xx=y
+CONFIG_APOLLO3G=y
+# CONFIG_ARCHES is not set
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS=11
+CONFIG_ARCH_MMAP_RND_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
+CONFIG_AUDIT_ARCH=y
+# CONFIG_BAMBOO is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BLUESTONE=y
+CONFIG_BOOKE=y
+CONFIG_BOOKE_WDT=y
+# CONFIG_CANYONLANDS is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEV_PPC4XX=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ESSIV=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5_PPC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_OFB=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_DATA_SHIFT=12
+CONFIG_DEBUG_MISC=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_REMAP=y
+CONFIG_DTC=y
+# CONFIG_E200 is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EBONY is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EIGER is not set
+CONFIG_EXTRA_TARGETS="uImage"
+CONFIG_FIXED_PHY=y
+CONFIG_FORCE_PCI=y
+CONFIG_FREEZER=y
+# CONFIG_FSL_LBC is not set
+CONFIG_FW_CACHE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
+# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
+# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
+# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
+# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
+# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_GLACIER is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_PPC4XX=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IBM_IIC=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_EMAC4=y
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RGMII=y
+CONFIG_IBM_EMAC_RXB=128
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_TAH=y
+CONFIG_IBM_EMAC_TXB=128
+# CONFIG_ICON is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISA_DMA_API=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_KATMAI is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LEDS_TRIGGER_PATTERN=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MIGRATION=y
+CONFIG_MMU_GATHER_PAGE_SIZE=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_IRQS=512
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND=y
+CONFIG_PACKING=y
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_ARCH_FALLBACKS=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYS_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PM=y
+# CONFIG_PMU_SYSFS is not set
+CONFIG_PM_AUTOSLEEP=y
+CONFIG_PM_CLK=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_PPC44x_SIMPLE=y
+CONFIG_PPC4xx_CPM=y
+CONFIG_PPC4xx_GPIO=y
+CONFIG_PPC4xx_MSI=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+# CONFIG_PPC64 is not set
+# CONFIG_PPC_47x is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_REGS=y
+# CONFIG_PPC_BOOK3S_6xx is not set
+CONFIG_PPC_DCR=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+CONFIG_PPC_FPU=y
+CONFIG_PPC_INDIRECT_PCI=y
+# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+CONFIG_PPC_MSI_BITMAP=y
+CONFIG_PPC_PAGE_SHIFT=12
+# CONFIG_PPC_PTDUMP is not set
+CONFIG_PPC_UDBG_16550=y
+CONFIG_PPC_WERROR=y
+CONFIG_PTE_64BIT=y
+# CONFIG_RAINIER is not set
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_RSEQ=y
+# CONFIG_SAM440EP is not set
+# CONFIG_SCOM_DEBUGFS is not set
+# CONFIG_SEQUOIA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TAISHAN is not set
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_THREAD_SHIFT=13
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VDSO32=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
+# CONFIG_WARP is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_POWERPC=y
+# CONFIG_YOSEMITE is not set
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/apm821xx/dts/apm82181.dtsi b/target/linux/apm821xx/dts/apm82181.dtsi
index 5be4487be0..6bab8c41fc 100644
--- a/target/linux/apm821xx/dts/apm82181.dtsi
+++ b/target/linux/apm821xx/dts/apm82181.dtsi
@@ -233,7 +233,7 @@
status = "disabled";
};
- ndfc@1,0 {
+ ndfc: ndfc@1,0 {
compatible = "ibm,ndfc";
reg = <00000003 00000000 00002000>;
ccr = <0x00001000>;
@@ -241,6 +241,17 @@
status = "disabled";
nand {
+ /*
+ * These are the same fixed "MAGIC" values
+ * settings as in the drivers code.
+ * They are the same for all devices that
+ * have NAND.
+ */
+ nand-ecc-engine = <&ndfc>;
+ nand-ecc-algo = "hamming";
+ nand-ecc-step-size = <256>;
+ nand-ecc-strength = <1>;
+
#address-cells = <1>;
#size-cells = <1>;
};
diff --git a/target/linux/apm821xx/dts/meraki-mr24.dts b/target/linux/apm821xx/dts/meraki-mr24.dts
index 660cf8f789..2f797f8352 100644
--- a/target/linux/apm821xx/dts/meraki-mr24.dts
+++ b/target/linux/apm821xx/dts/meraki-mr24.dts
@@ -47,6 +47,8 @@
status = "okay";
/* 32 MiB NAND Flash */
nand {
+ nand-is-boot-medium;
+
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00150000>;
diff --git a/target/linux/apm821xx/dts/meraki-mx60.dts b/target/linux/apm821xx/dts/meraki-mx60.dts
index 9bddbdd25d..fd5464f8a1 100644
--- a/target/linux/apm821xx/dts/meraki-mx60.dts
+++ b/target/linux/apm821xx/dts/meraki-mx60.dts
@@ -50,6 +50,8 @@
ndfc@1,0 {
status = "okay";
nand {
+ nand-is-boot-medium;
+
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
diff --git a/target/linux/apm821xx/dts/netgear-wndap6x0.dtsi b/target/linux/apm821xx/dts/netgear-wndap6x0.dtsi
index eac54011e7..fc428bca0f 100644
--- a/target/linux/apm821xx/dts/netgear-wndap6x0.dtsi
+++ b/target/linux/apm821xx/dts/netgear-wndap6x0.dtsi
@@ -36,6 +36,8 @@
status = "okay";
/* 32 MiB SLC NAND Flash */
nand {
+ nand-is-boot-medium;
+
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
diff --git a/target/linux/apm821xx/dts/netgear-wndr4700.dts b/target/linux/apm821xx/dts/netgear-wndr4700.dts
index 0a1b2f4f32..ad23e8b441 100644
--- a/target/linux/apm821xx/dts/netgear-wndr4700.dts
+++ b/target/linux/apm821xx/dts/netgear-wndr4700.dts
@@ -173,10 +173,13 @@
};
&EBC0 {
- ndfc@1,0 {
+ ndfc: ndfc@1,0 {
+
status = "okay";
/* 128 MiB Nand Flash */
nand {
+ nand-is-boot-medium;
+
partition0,0@0 {
label = "NAND 128MiB 3,3V 8-bit";
reg = <0x00000000 0x08000000>;
diff --git a/target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch
new file mode 100644
index 0000000000..e188954094
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/201-add-amcc-apollo3g-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -121,6 +121,17 @@ config CANYONLANDS
+ help
+ This option enables support for the AMCC PPC460EX evaluation board.
+
++config APOLLO3G
++ bool "Apollo3G"
++ depends on 44x
++ default n
++ select PPC44x_SIMPLE
++ select APM821xx
++ select IBM_EMAC_RGMII
++ select 460EX
++ help
++ This option enables support for the AMCC Apollo 3G board.
++
+ config GLACIER
+ bool "Glacier"
+ depends on 44x
+--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
+@@ -47,6 +47,7 @@ machine_device_initcall(ppc44x_simple, p
+ * board.c file for it rather than adding it to this list.
+ */
+ static char *board[] __initdata = {
++ "amcc,apollo3g",
+ "amcc,arches",
+ "amcc,bamboo",
+ "apm,bluestone",
diff --git a/target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch
new file mode 100644
index 0000000000..110726d258
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/300-fix-atheros-nics-on-apm82181.patch
@@ -0,0 +1,51 @@
+--- a/arch/powerpc/platforms/4xx/pci.c
++++ b/arch/powerpc/platforms/4xx/pci.c
+@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
+ u32 val;
+
+ /*
+- * Do a software reset on PCIe ports.
+- * This code is to fix the issue that pci drivers doesn't re-assign
+- * bus number for PCIE devices after Uboot
+- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+- * PT quad port, SAS LSI 1064E)
++ * Only reset the PHY when no link is currently established.
++ * This is for the Atheros PCIe board which has problems to establish
++ * the link (again) after this PHY reset. All other currently tested
++ * PCIe boards don't show this problem.
+ */
+-
+- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+- mdelay(10);
++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
++ if (!(val & 0x00001000)) {
++ /*
++ * Do a software reset on PCIe ports.
++ * This code is to fix the issue that pci drivers doesn't re-assign
++ * bus number for PCIE devices after Uboot
++ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
++ * PT quad port, SAS LSI 1064E)
++ */
++
++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
++ mdelay(10);
++ }
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+- mdelay(50);
+- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
++ if (!(val & 0x00001000)) {
++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
++ mdelay(50);
++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
++ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch
new file mode 100644
index 0000000000..452d97e85a
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/301-fix-memory-map-wndr4700.patch
@@ -0,0 +1,14 @@
+--- a/arch/powerpc/platforms/4xx/pci.c
++++ b/arch/powerpc/platforms/4xx/pci.c
+@@ -1902,9 +1902,9 @@ static void __init ppc4xx_configure_pcie
+ * if it works
+ */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
++ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
++ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
diff --git a/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch
new file mode 100644
index 0000000000..5de02ae679
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch
@@ -0,0 +1,53 @@
+From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 23 Jun 2016 20:28:20 +0200
+Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
+ uPD720202
+
+The APM82181 does not support MSI-X. When probed, it will
+produce a noisy warning.
+
+---
+ drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 362 insertions(+)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -260,6 +260,7 @@ static void xhci_pci_quirks(struct devic
+ pdev->device == 0x0015) {
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci->quirks |= XHCI_ZERO_64B_REGS;
++ xhci->quirks |= XHCI_FORCE_MSI;
+ }
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -423,10 +423,14 @@ static int xhci_try_enable_msi(struct us
+ free_irq(hcd->irq, hcd);
+ hcd->irq = 0;
+
+- ret = xhci_setup_msix(xhci);
+- if (ret)
+- /* fall back to msi*/
++ if (xhci->quirks & XHCI_FORCE_MSI) {
+ ret = xhci_setup_msi(xhci);
++ } else {
++ ret = xhci_setup_msix(xhci);
++ if (ret)
++ /* fall back to msi*/
++ ret = xhci_setup_msi(xhci);
++ }
+
+ if (!ret) {
+ hcd->msi_enabled = 1;
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1886,6 +1886,7 @@ struct xhci_hcd {
+ struct xhci_hub usb2_rhub;
+ struct xhci_hub usb3_rhub;
+ /* support xHCI 1.0 spec USB2 hardware LPM */
++#define XHCI_FORCE_MSI (1 << 24)
+ unsigned hw_lpm_support:1;
+ /* Broken Suspend flag for SNPS Suspend resume issue */
+ unsigned broken_suspend:1;
diff --git a/target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch
new file mode 100644
index 0000000000..ad83ea2d86
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/803-hwmon-tc654-add-detection-routine.patch
@@ -0,0 +1,65 @@
+From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 17 Dec 2017 17:27:15 +0100
+Subject: [PATCH 1/2] hwmon: tc654 add detection routine
+
+This patch adds a detection routine for the TC654/TC655
+chips. Both IDs are listed in the Datasheet.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+--- a/drivers/hwmon/tc654.c
++++ b/drivers/hwmon/tc654.c
+@@ -55,6 +55,11 @@ enum tc654_regs {
+ /* Register data is read (and cached) at most once per second. */
+ #define TC654_UPDATE_INTERVAL HZ
+
++/* Manufacturer and Version Identification Register Values */
++#define TC654_MFR_ID_MICROCHIP 0x84
++#define TC654_VER_ID 0x00
++#define TC655_VER_ID 0x01
++
+ struct tc654_data {
+ struct i2c_client *client;
+
+@@ -481,6 +486,29 @@ static const struct i2c_device_id tc654_
+ {}
+ };
+
++static int
++tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
++{
++ struct i2c_adapter *adapter = new_client->adapter;
++ int manufacturer, product;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
++ return -ENODEV;
++
++ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
++ if (manufacturer != TC654_MFR_ID_MICROCHIP)
++ return -ENODEV;
++
++ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
++ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
++ return -ENODEV;
++
++ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
++ I2C_NAME_SIZE);
++ return 0;
++}
++
++
+ MODULE_DEVICE_TABLE(i2c, tc654_id);
+
+ static struct i2c_driver tc654_driver = {
+@@ -489,6 +517,7 @@ static struct i2c_driver tc654_driver =
+ },
+ .probe_new = tc654_probe,
+ .id_table = tc654_id,
++ .detect = tc654_detect,
+ };
+
+ module_i2c_driver(tc654_driver);
diff --git a/target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch
new file mode 100644
index 0000000000..0d2bd79fd7
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/804-hwmon-tc654-add-thermal_cooling-device.patch
@@ -0,0 +1,174 @@
+From 9cb27801b5cbad2e1aaf45aac428cb2fac5e1372 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 17 Dec 2017 17:29:13 +0100
+Subject: [PATCH] hwmon: tc654: add thermal_cooling device
+
+This patch adds a thermaL_cooling device to the tc654 driver.
+This allows the chip to be used for DT-based cooling.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 86 insertions(+), 17 deletions(-)
+
+--- a/drivers/hwmon/tc654.c
++++ b/drivers/hwmon/tc654.c
+@@ -15,6 +15,7 @@
+ #include <linux/module.h>
+ #include <linux/mutex.h>
+ #include <linux/slab.h>
++#include <linux/thermal.h>
+ #include <linux/util_macros.h>
+
+ enum tc654_regs {
+@@ -132,6 +133,9 @@ struct tc654_data {
+ * writable register used to control the duty
+ * cycle of the V OUT output.
+ */
++
++ /* optional cooling device */
++ struct thermal_cooling_device *cdev;
+ };
+
+ /* helper to grab and cache data, at most one time per second */
+@@ -367,36 +371,30 @@ static ssize_t pwm_mode_store(struct dev
+ static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
+ 172, 184, 196, 207, 219, 231, 243, 255};
+
++static int get_pwm(struct tc654_data *data)
++{
++ if (data->config & TC654_REG_CONFIG_SDM)
++ return 0;
++ else
++ return tc654_pwm_map[data->duty_cycle];
++}
++
+ static ssize_t pwm_show(struct device *dev, struct device_attribute *da,
+ char *buf)
+ {
+ struct tc654_data *data = tc654_update_client(dev);
+- int pwm;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+- if (data->config & TC654_REG_CONFIG_SDM)
+- pwm = 0;
+- else
+- pwm = tc654_pwm_map[data->duty_cycle];
+-
+- return sprintf(buf, "%d\n", pwm);
++ return sprintf(buf, "%d\n", get_pwm(data));
+ }
+
+-static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
+- const char *buf, size_t count)
++static int _set_pwm(struct tc654_data *data, unsigned long val)
+ {
+- struct tc654_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+- unsigned long val;
+ int ret;
+
+- if (kstrtoul(buf, 10, &val))
+- return -EINVAL;
+- if (val > 255)
+- return -EINVAL;
+-
+ mutex_lock(&data->update_lock);
+
+ if (val == 0)
+@@ -416,6 +414,22 @@ static ssize_t pwm_store(struct device *
+
+ out:
+ mutex_unlock(&data->update_lock);
++ return ret;
++}
++
++static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
++ const char *buf, size_t count)
++{
++ struct tc654_data *data = dev_get_drvdata(dev);
++ unsigned long val;
++ int ret;
++
++ if (kstrtoul(buf, 10, &val))
++ return -EINVAL;
++ if (val > 255)
++ return -EINVAL;
++
++ ret = _set_pwm(data, val);
+ return ret < 0 ? ret : count;
+ }
+
+@@ -447,6 +461,47 @@ static struct attribute *tc654_attrs[] =
+
+ ATTRIBUTE_GROUPS(tc654);
+
++/* cooling device */
++
++static int tc654_get_max_state(struct thermal_cooling_device *cdev,
++ unsigned long *state)
++{
++ *state = 255;
++ return 0;
++}
++
++static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
++ unsigned long *state)
++{
++ struct tc654_data *data = tc654_update_client(cdev->devdata);
++
++ if (IS_ERR(data))
++ return PTR_ERR(data);
++
++ *state = get_pwm(data);
++ return 0;
++}
++
++static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
++ unsigned long state)
++{
++ struct tc654_data *data = tc654_update_client(cdev->devdata);
++
++ if (IS_ERR(data))
++ return PTR_ERR(data);
++
++ if (state > 255)
++ return -EINVAL;
++
++ return _set_pwm(data, state);
++}
++
++static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
++ .get_max_state = tc654_get_max_state,
++ .get_cur_state = tc654_get_cur_state,
++ .set_cur_state = tc654_set_cur_state,
++};
++
+ /*
+ * device probe and removal
+ */
+@@ -477,7 +532,21 @@ static int tc654_probe(struct i2c_client
+ hwmon_dev =
+ devm_hwmon_device_register_with_groups(dev, client->name, data,
+ tc654_groups);
+- return PTR_ERR_OR_ZERO(hwmon_dev);
++ if (IS_ERR(hwmon_dev))
++ return PTR_ERR(hwmon_dev);
++
++#if IS_ENABLED(CONFIG_OF)
++ /* Optional cooling device register for Device tree platforms */
++ data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
++ "tc654", hwmon_dev,
++ &tc654_fan_cool_ops);
++#else /* CONFIG_OF */
++ /* Optional cooling device register for non Device tree platforms */
++ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
++ &tc654_fan_cool_ops);
++#endif /* CONFIG_OF */
++
++ return PTR_ERR_OR_ZERO(data->cdev);
+ }
+
+ static const struct i2c_device_id tc654_id[] = {
diff --git a/target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch b/target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch
new file mode 100644
index 0000000000..fb532b2cc0
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch
@@ -0,0 +1,29 @@
+From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 1 Dec 2019 02:08:23 +0100
+Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression
+ method
+
+Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
+instruct the mkimage to use the xz compression, which isn't
+supported. This patch forces the gzip compression, which is
+supported and doesn't matter because the generated uImage for
+the apm821xx target gets ignored as the OpenWrt toolchain will
+do separate U-Boot kernel images for each device individually.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/powerpc/boot/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -250,7 +250,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo
+
+ # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
+ quiet_cmd_wrap = WRAP $@
+- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
++ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \
+ $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
+ vmlinux
+