aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts73
-rw-r--r--target/linux/ipq806x/image/Makefile25
3 files changed, 21 insertions, 81 deletions
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f4572d038c..74ad00c5ce 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -14,7 +14,7 @@ case "$FIRMWARE" in
ath10k_patch_mac $(mtd_get_mac_binary ART 0x1e)
;;
edgecore,ecw5410)
- ath10kcal_extract "0:ART" 4096 12064
+ caldata_extract "0:ART" 0x1000 0x2f20
;;
linksys,ea7500-v1 |\
linksys,ea8500)
@@ -83,7 +83,7 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0002:01:00.0.bin")
case $board in
edgecore,ecw5410)
- ath10kcal_extract "0:ART" 20480 12064
+ caldata_extract "0:ART" 0x5000 0x2f20
;;
esac
;;
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
index 6d216bd85e..9d6afa1c8a 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
@@ -8,10 +8,6 @@
compatible = "edgecore,ecw5410", "qcom,ipq8064";
reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
nss@40000000 {
reg = <0x40000000 0x1000000>;
no-map;
@@ -26,11 +22,6 @@
reg = <0x44000000 0x600000>;
no-map;
};
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
};
cpus {
@@ -42,21 +33,19 @@
};
aliases {
- serial0 = &gsbi4_serial;
serial1 = &gsbi1_serial;
mdio-gpio0 = &mdio0;
ethernet0 = &gmac3;
ethernet1 = &gmac2;
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
};
chosen {
bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
- stdout-path = "serial0:115200n8";
};
keys {
@@ -76,7 +65,7 @@
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
- power_green: power_green {
+ led_power_green: power_green {
label = "ecw5410:green:power";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
@@ -96,7 +85,7 @@
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
- power_red: power_red {
+ led_power_red: power_red {
label = "ecw5410:red:power";
gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
};
@@ -133,40 +122,6 @@
};
};
- nand_pins: nand_pins {
- disable {
- pins = "gpio34", "gpio35", "gpio36", "gpio37",
- "gpio38";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
-
- pullups {
- pins = "gpio39";
- function = "nand";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- hold {
- pins = "gpio40", "gpio41", "gpio42", "gpio43",
- "gpio44", "gpio45", "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-bus-hold;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
led_pins: led_pins {
mux {
pins = "gpio16", "gpio23", "gpio24", "gpio26",
@@ -208,22 +163,6 @@
};
};
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
-
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index 3b86760a19..ec73630ae5 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -109,6 +109,19 @@ define Device/compex_wpq864
endef
TARGET_DEVICES += compex_wpq864
+define Device/edgecore_ecw5410
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Edgecore
+ DEVICE_MODEL := ECW5410
+ SOC := qcom-ipq8068
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@v2.0-ap160
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
+endef
+TARGET_DEVICES += edgecore_ecw5410
+
define Device/linksys_ea7500-v1
$(call Device/LegacyImage)
DEVICE_VENDOR := Linksys
@@ -126,18 +139,6 @@ define Device/linksys_ea7500-v1
endef
TARGET_DEVICES += linksys_ea7500-v1
-define Device/edgecore_ecw5410
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_TITLE := Edgecore ECW5410
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS := qcom-ipq8068-ecw5410
- DEVICE_DTS_CONFIG := config@v2.0-ap160
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
-endef
-TARGET_DEVICES += edgecore_ecw5410
-
define Device/linksys_ea8500
$(call Device/LegacyImage)
DEVICE_VENDOR := Linksys