diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/ipq806x/Makefile | 2 | ||||
| -rw-r--r-- | target/linux/ipq806x/base-files/etc/board.d/02_network | 7 | ||||
| -rwxr-xr-x | target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port | 45 |
3 files changed, 8 insertions, 46 deletions
diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile index 1bcea1fa80f..74a0007a4e0 100644 --- a/target/linux/ipq806x/Makefile +++ b/target/linux/ipq806x/Makefile @@ -21,6 +21,6 @@ DEFAULT_PACKAGES += \ kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \ kmod-ath10k-ct wpad-basic-mbedtls \ - uboot-envtools ip-tiny + uboot-envtools $(eval $(call BuildTarget)) diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index a4316272e9e..7fdda7cfec4 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -34,10 +34,17 @@ ipq806x_setup_interfaces() tplink,ad7200 |\ zyxel,nbg6817) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" + ucidef_set_network_device_conduit "lan1" "eth1" + ucidef_set_network_device_conduit "lan2" "eth1" + ucidef_set_network_device_conduit "lan3" "eth1" + ucidef_set_network_device_conduit "lan4" "eth1" + ucidef_set_network_device_conduit "wan" "eth0" ;; asus,onhub |\ tplink,onhub) ucidef_set_interfaces_lan_wan "lan1" "wan" + ucidef_set_network_device_conduit "lan1" "eth1" + ucidef_set_network_device_conduit "wan" "eth0" ;; edgecore,ecw5410 |\ extreme,ap3935) diff --git a/target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port b/target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port deleted file mode 100755 index bf14907b8fb..00000000000 --- a/target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh /etc/rc.common - -START=15 - -set_qca8k_port() { - local port=$1 - local master=$2 - - ip link set $port type dsa conduit $master -} - -boot() { - # Restore original implementation where the eth1 (port 6) was used - # for the lan port and the eth0 (port 0) was used for the wan port - case $(board_name) in - askey,rt4230w-rev6 |\ - asrock,g10 |\ - buffalo,wxr-2533dhp |\ - compex,wpq864 |\ - nec,wg2600hp |\ - nec,wg2600hp3 |\ - netgear,d7800 |\ - netgear,r7500 |\ - netgear,r7500v2 |\ - netgear,r7800 |\ - netgear,xr450 |\ - netgear,xr500 |\ - nokia,ac400i |\ - tplink,ad7200 |\ - tplink,c2600 |\ - tplink,vr2600v |\ - zyxel,nbg6817) - set_qca8k_port lan1 eth1 - set_qca8k_port lan2 eth1 - set_qca8k_port lan3 eth1 - set_qca8k_port lan4 eth1 - set_qca8k_port wan eth0 - ;; - asus,onhub |\ - tplink,onhub) - set_qca8k_port lan1 eth1 - set_qca8k_port wan eth0 - ;; - esac -} |