4 files changed, 246 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index d8312a9b89..e8f4e1d14e 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -28,6 +28,11 @@ case "$board" in
 	ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
 	ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
 	;;
+
+"pcs,cr5000")
+	ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
+	;;
+
 "tplink,re450-v2")
 	ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
 	ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index c5e23e4e50..ca023f702f 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -43,6 +43,11 @@ ath79_setup_interfaces()
 		"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
 		;;
 
+	"pcs,cr5000")
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
+
 	"tplink,tl-archer-c7-v2")
 		ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/dts/ar9344_pcs_cr5000.dts b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
new file mode 100644
index 0000000000..0d38a3557e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+	model = "PowerCloud Systems CR5000";
+	compatible = "pcs,cr5000", "qca,ar9344";
+
+	aliases {
+		serial0 = &uart;
+		led-status = &status;
+	};
+
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+                pinctrl-0 = <&jtag_disable_pins>;
+
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "WPS button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status: power {
+			label = "pcs:amber:power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
+				<&gpio 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wlan2g {
+			label = "pcs:blue:wlan";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wps_white {
+			label = "pcs:white:wps";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi {
+	num-cs = <1>;
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x050000 0x07a0000>;
+			};
+
+			art: partition@7f0000 {
+				label = "art";
+				reg = <0x7f0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+	};
+
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+
+        ath9k: wifi@168c,0030 {
+		compatible = "168c,0030";
+		mtd-mac-address = <&art 0x5002>;
+		#gpio-cells = <2>;
+		gpio-controller;
+        };
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy-mask = <0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "rgmii";
+                qca,ar8327-initvals = <
+			0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+			0x10 0x81000080 /* POWER_ON_STRAP */
+			0x50 0xcc35cc35 /* LED_CTRL0 */
+			0x54 0xca35ca35 /* LED_CTRL1 */
+			0x58 0xc935c935 /* LED_CTRL2 */
+			0x5c 0x03ffff00 /* LED_CTRL3 */
+			0x7c 0x0000007e /* PORT0_STATUS */
+		>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	/* default for ar934x, except for 1000M */
+	pll-data = <0x06000000 0x00000101 0x00001616>;
+
+	mtd-mac-address = <&art 0x0>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+
+	aliases {
+		ag0 = &eth1;
+	};
+
+	port@0 {
+		compatible = "swconfig,port";
+		swconfig,segment = "lan";
+		swconfig,portmap = <1 1>;
+	};
+
+	port@1 {
+		compatible = "swconfig,port";
+		swconfig,segment = "lan";
+		swconfig,portmap = <2 2>;
+	};
+
+	port@2 {
+		compatible = "swconfig,port";
+		swconfig,segment = "lan";
+		swconfig,portmap = <3 3>;
+	};
+
+	port@3 {
+		compatible = "swconfig,port";
+		swconfig,segment = "lan";
+		swconfig,portmap = <4 4>;
+	};
+
+	port@4 {
+		compatible = "swconfig,port";
+		swconfig,segment = "wan";
+		swconfig,portmap = <5 5>;
+	};
+
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x1002>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index fbec180496..d8897784ea 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -66,6 +66,16 @@ define Device/openmesh_om5p-ac-v2
 endef
 TARGET_DEVICES += openmesh_om5p-ac-v2
 
+define Device/pcs_cr5000
+  ATH_SOC := ar9344
+  DEVICE_TITLE := PowerCloud Systems CR5000
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
+  IMAGE_SIZE := 7808k
+  IMAGES := sysupgrade.bin
+  SUPPORTED_DEVICES += cr5000
+endef
+TARGET_DEVICES += pcs_cr5000
+
 define Device/netgear_wndr3800
   ATH_SOC := ar7161
   DEVICE_TITLE := NETGEAR WNDR3800