diff options
Diffstat (limited to 'target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch')
| -rw-r--r-- | target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch | 160 |
1 files changed, 0 insertions, 160 deletions
diff --git a/target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch b/target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch deleted file mode 100644 index c304f7937f..0000000000 --- a/target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch +++ /dev/null @@ -1,160 +0,0 @@ -From 49f01c9e14b3476cbdf9623c4812c43f6485830b Mon Sep 17 00:00:00 2001 -From: Milo Kim <woogyom.kim@gmail.com> -Date: Fri, 28 Oct 2016 15:59:01 +0900 -Subject: ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs - -(backported from kernel 4.13) - -This patch provides a common file for NanoPi M1 and Neo SBC. - -Those have common features below. - * UART0 - * 2 LEDs - * USB host (EHCI3, OHCI3) and PHY - * MicroSD - * GPIO key switch - -Cc: James Pettigrew <james@innovum.com.au> -Signed-off-by: Milo Kim <woogyom.kim@gmail.com> -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> - ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi -@@ -0,0 +1,137 @@ -+/* -+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au> -+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun8i-h3.dtsi" -+#include "sunxi-common-regulators.dtsi" -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> -+ -+/ { -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&leds_npi>, <&leds_r_npi>; -+ -+ status { -+ label = "nanopi:blue:status"; -+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ pwr { -+ label = "nanopi:green:pwr"; -+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ }; -+ -+ r_gpio_keys { -+ compatible = "gpio-keys"; -+ input-name = "k1"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sw_r_npi>; -+ -+ k1@0 { -+ label = "k1"; -+ linux,code = <KEY_POWER>; -+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&ehci3 { -+ status = "okay"; -+}; -+ -+&mmc0 { -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; -+ cd-inverted; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; -+ status = "okay"; -+ vmmc-supply = <®_vcc3v3>; -+}; -+ -+&ohci3 { -+ status = "okay"; -+}; -+ -+&pio { -+ leds_npi: led_pins@0 { -+ pins = "PA10"; -+ function = "gpio_out"; -+ }; -+}; -+ -+&r_pio { -+ leds_r_npi: led_pins@0 { -+ pins = "PL10"; -+ function = "gpio_out"; -+ }; -+ -+ sw_r_npi: key_pins@0 { -+ pins = "PL3"; -+ function = "gpio_in"; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&usbphy { -+ status = "okay"; -+}; |