aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h')
-rw-r--r--target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h233
1 files changed, 233 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
new file mode 100644
index 0000000000..8f12b5e558
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains extensions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI). It includes definitions of all
+ * extended commands and events. Extensions include useful commands
+ * that are not directly related to wireless activities. They may
+ * be hardware-specific, and they might not be supported on all
+ * implementations.
+ *
+ * Extended WMIX commands are encapsulated in a WMI message with
+ * cmd=WMI_EXTENSION_CMD.
+ *
+ */
+
+#ifndef _WMIX_H_
+#define _WMIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "dbglog.h"
+
+/*
+ * Extended WMI commands are those that are needed during wireless
+ * operation, but which are not really wireless commands. This allows,
+ * for instance, platform-specific commands. Extended WMI commands are
+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
+ * Extended WMI events are similarly embedded in a WMI event message with
+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
+ */
+typedef PREPACK struct {
+ A_UINT32 commandId;
+} POSTPACK WMIX_CMD_HDR;
+
+typedef enum {
+ WMIX_DSETOPEN_REPLY_CMDID = 0x2001,
+ WMIX_DSETDATA_REPLY_CMDID,
+ WMIX_GPIO_OUTPUT_SET_CMDID,
+ WMIX_GPIO_INPUT_GET_CMDID,
+ WMIX_GPIO_REGISTER_SET_CMDID,
+ WMIX_GPIO_REGISTER_GET_CMDID,
+ WMIX_GPIO_INTR_ACK_CMDID,
+ WMIX_HB_CHALLENGE_RESP_CMDID,
+ WMIX_DBGLOG_CFG_MODULE_CMDID,
+} WMIX_COMMAND_ID;
+
+typedef enum {
+ WMIX_DSETOPENREQ_EVENTID = 0x3001,
+ WMIX_DSETCLOSE_EVENTID,
+ WMIX_DSETDATAREQ_EVENTID,
+ WMIX_GPIO_INTR_EVENTID,
+ WMIX_GPIO_DATA_EVENTID,
+ WMIX_GPIO_ACK_EVENTID,
+ WMIX_HB_CHALLENGE_RESP_EVENTID,
+ WMIX_DBGLOG_EVENTID,
+} WMIX_EVENT_ID;
+
+/*
+ * =============DataSet support=================
+ */
+
+/*
+ * WMIX_DSETOPENREQ_EVENTID
+ * DataSet Open Request Event
+ */
+typedef PREPACK struct {
+ A_UINT32 dset_id;
+ A_UINT32 targ_dset_handle; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETOPENREQ_EVENT;
+
+/*
+ * WMIX_DSETCLOSE_EVENTID
+ * DataSet Close Event
+ */
+typedef PREPACK struct {
+ A_UINT32 access_cookie;
+} POSTPACK WMIX_DSETCLOSE_EVENT;
+
+/*
+ * WMIX_DSETDATAREQ_EVENTID
+ * DataSet Data Request Event
+ */
+typedef PREPACK struct {
+ A_UINT32 access_cookie;
+ A_UINT32 offset;
+ A_UINT32 length;
+ A_UINT32 targ_buf; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETDATAREQ_EVENT;
+
+typedef PREPACK struct {
+ A_UINT32 status;
+ A_UINT32 targ_dset_handle;
+ A_UINT32 targ_reply_fn;
+ A_UINT32 targ_reply_arg;
+ A_UINT32 access_cookie;
+ A_UINT32 size;
+ A_UINT32 version;
+} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
+
+typedef PREPACK struct {
+ A_UINT32 status;
+ A_UINT32 targ_buf;
+ A_UINT32 targ_reply_fn;
+ A_UINT32 targ_reply_arg;
+ A_UINT32 length;
+ A_UINT8 buf[1];
+} POSTPACK WMIX_DSETDATA_REPLY_CMD;
+
+
+/*
+ * =============GPIO support=================
+ * All masks are 18-bit masks with bit N operating on GPIO pin N.
+ */
+
+#include "gpio.h"
+
+/*
+ * Set GPIO pin output state.
+ * In order for output to be driven, a pin must be enabled for output.
+ * This can be done during initialization through the GPIO Configuration
+ * DataSet, or during operation with the enable_mask.
+ *
+ * If a request is made to simultaneously set/clear or set/disable or
+ * clear/disable or disable/enable, results are undefined.
+ */
+typedef PREPACK struct {
+ A_UINT32 set_mask; /* pins to set */
+ A_UINT32 clear_mask; /* pins to clear */
+ A_UINT32 enable_mask; /* pins to enable for output */
+ A_UINT32 disable_mask; /* pins to disable/tristate */
+} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
+
+/*
+ * Set a GPIO register. For debug/exceptional cases.
+ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
+ * platform-dependent header.
+ */
+typedef PREPACK struct {
+ A_UINT32 gpioreg_id; /* GPIO register ID */
+ A_UINT32 value; /* value to write */
+} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
+
+/* Get a GPIO register. For debug/exceptional cases. */
+typedef PREPACK struct {
+ A_UINT32 gpioreg_id; /* GPIO register to read */
+} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
+
+/*
+ * Host acknowledges and re-arms GPIO interrupts. A single
+ * message should be used to acknowledge all interrupts that
+ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
+ */
+typedef PREPACK struct {
+ A_UINT32 ack_mask; /* interrupts to acknowledge */
+} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
+
+/*
+ * Target informs Host of GPIO interrupts that have ocurred since the
+ * last WMIX_GIPO_INTR_ACK_CMD was received. Additional information --
+ * the current GPIO input values is provided -- in order to support
+ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
+ */
+typedef PREPACK struct {
+ A_UINT32 intr_mask; /* pending GPIO interrupts */
+ A_UINT32 input_values; /* recent GPIO input values */
+} POSTPACK WMIX_GPIO_INTR_EVENT;
+
+/*
+ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ * value set to the mask of GPIO pin inputs and
+ * reg_id set to GPIO_ID_NONE
+ *
+ *
+ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ * value set to the value of the requested register and
+ * reg_id identifying the register (reflects the original request)
+ * NB: reg_id supports the future possibility of unsolicited
+ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
+ * simplify Host GPIO support.
+ */
+typedef PREPACK struct {
+ A_UINT32 value;
+ A_UINT32 reg_id;
+} POSTPACK WMIX_GPIO_DATA_EVENT;
+
+/*
+ * =============Error Detection support=================
+ */
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_CMDID
+ * Heartbeat Challenge Response command
+ */
+typedef PREPACK struct {
+ A_UINT32 cookie;
+ A_UINT32 source;
+} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_EVENTID
+ * Heartbeat Challenge Response Event
+ */
+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
+
+typedef PREPACK struct {
+ struct dbglog_config_s config;
+} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMIX_H_ */